contig.c (FLATMEM) requires the same optimization as in discontig.c for show_mem
when VIRTUAL_MEM_MAP is in use. Otherwise FLATMEM has softlockup timeouts.
This was boot tested for memory configuration: SPARSEMEM,
DISCONTIG+VIRTUAL_MEM_MAP, FLATMEM, FLATMEM+VIRTUAL_MEM_MAP and
FLATMEM+VIRTUAL_MEM_MAP with largest memory gap less than LARGE_GAP by
using boot parameter "mem=".

This was boot tested and "echo m >/proc/sysrq-trigger" output evaluated for
: FLATMEM, FLATMEM+VIRTUAL_MEM_MAP, DISCONTIGMEM+VIRTUAL_MEM_MAP and
SPARSEMEM.
Signed-off-by: NBob Picco <bob.picco@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When an object is created via a symlink into an audited directory, audit misses
the event due to not having collected the inode data for the directory.  Modify
__audit_inode_child() to copy the parent inode data if a parent wasn't found in
audit_names[].
Signed-off-by: NAmy Griffis <amy.griffis@hp.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When the specified path is an existing file or when it is a symlink, audit
collects the wrong inode number, which causes it to miss the open() event.
Adding a second hook to the open() path fixes this.

Also add audit_copy_inode() to consolidate some code.
Signed-off-by: NAmy Griffis <amy.griffis@hp.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This reverts c182274f commit because it
required a newer version of udev to work properly than what is currently
documented in Documentation/Changes.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts bd009496 commit because it
required a newer version of udev to work properly than what is currently
documented in Documentation/Changes.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds a new unusual_devs flag for when usb-storage needs to ignore
a device that it would otherwise claim.

We need to ignore the ZyXEL G220F as it is a virtual CDROM drive which
includes the windows driver for this USB-WLAN adapter. After the windows
driver is installed on a windows system, it converts it into a WLAN adapter
(by ejecting the virtual disc).

The virtual CDROM is of no interest to Linux users. The zd1211rw driver will
automatically perform the eject operation, we just need to ensure that
usb-storage does not claim the device.
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix some sparse warnings on ia64.  Large constants that should be long
instead of int.  Use NULL instead of 0.  Add some missing __iomem
casts.  Replace a non-C99 structure assignment.
Signed-off-by: NKeith Owens <kaos@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

include/linux/security.h: In function ‘security_release_secctx’:
include/linux/security.h:2757: warning: ‘return’ with a value, in function returning void
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Catherine Zhang <cxzhang@watson.ibm.com>

This patch implements a cleaner fix for the memory leak problem of the
original unix datagram getpeersec patch.  Instead of creating a
security context each time a unix datagram is sent, we only create the
security context when the receiver requests it.

This new design requires modification of the current
unix_getsecpeer_dgram LSM hook and addition of two new hooks, namely,
secid_to_secctx and release_secctx.  The former retrieves the security
context and the latter releases it.  A hook is required for releasing
the security context because it is up to the security module to decide
how that's done.  In the case of Selinux, it's a simple kfree
operation.
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The skb_queue_head_init() function is used both in drivers for private use
and in the core networking code.  The usage models are vastly set of
functions that is only softirq safe; while the driver usage tends to be
more limited to a few hardirq safe accessor functions.  Rather than
annotating all 133+ driver usages, for now just split this lock into a per
queue class.  This change is obviously safe and probably should make
2.6.18.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a dev_alloc_skb variant that takes a struct net_device * paramater.
For now that paramater is unused, but I'll use it to allocate the skb
from node-local memory in a follow-up patch.  Also there have been some
other plans mentioned on the list that can use it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch uses notifier blocks to implement a network event
notifier mechanism.

Clients register their callback function by calling
register_netevent_notifier() like this:

static struct notifier_block nb = {
        .notifier_call = my_callback_func
};

...

register_netevent_notifier(&nb);
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refer to RFC2012, tcpAttemptFails is defined as following:
  tcpAttemptFails OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "The number of times TCP connections have made a direct
              transition to the CLOSED state from either the SYN-SENT
              state or the SYN-RCVD state, plus the number of times TCP
              connections have made a direct transition to the LISTEN
              state from the SYN-RCVD state."
      ::= { tcp 7 }

When I lookup into RFC793, I found that the state change should occured
under following condition:
  1. SYN-SENT -> CLOSED
     a) Received ACK,RST segment when SYN-SENT state.

  2. SYN-RCVD -> CLOSED
     b) Received SYN segment when SYN-RCVD state(came from LISTEN).
     c) Received RST segment when SYN-RCVD state(came from SYN-SENT).
     d) Received SYN segment when SYN-RCVD state(came from SYN-SENT).

  3. SYN-RCVD -> LISTEN
     e) Received RST segment when SYN-RCVD state(came from LISTEN).

In my test, those direct state transition can not be counted to
tcpAttemptFails.
Signed-off-by: NWei Yongjun <yjwei@nanjing-fnst.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Header doesn't use anything from atomic.h.
It fixes headers_check warning:

include/linux/netfilter_bridge.h requires asm/atomic.h, which does not exist

Compile tested on
alpha     arm   i386-up  sparc    sparc64-up  x86_64
alpha-up  i386           sparc64  sparc-up    x86_64-up
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current users of ip6_dst_lookup can be divided into two classes:

1) The caller holds no locks and is in user-context (UDP).
2) The caller does not want to lookup the dst cache at all.

The second class covers everyone except UDP because most people do
the cache lookup directly before calling ip6_dst_lookup.  This patch
adds ip6_sk_dst_lookup for the first class.

Similarly ip6_dst_store users can be divded into those that need to
take the socket dst lock and those that don't.  This patch adds
__ip6_dst_store for those (everyone except UDP/datagram) that don't
need an extra lock.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch from Tony Lindgren

"clocks" is only needed only for CONFIG_OMAP_RESET_CLOCKS,
which turns of all unused clocks in with late_initcall. This is to kill
clocks that may have been left on by the bootloader. Having static and
non-static declaration of clocks makes omap_h2_1610_defconfig build fail.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch fixes several problems:
- The legacy backlight value might be set at interrupt time. Introduced
  a worker to prevent it from directly calling the backlight code.
- via-pmu allows the backlight to be grabbed, in which case we need to
  prevent other kernel code from changing the brightness.
- Don't send PMU requests in via-pmu-backlight when the machine is about
  to sleep or waking up.
- More Kconfig fixes.
Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The backlight and lcd subsystems can be notified by the framebuffer layer
of blanking events.  However, these subsystems, as a whole, can function
independently from the framebuffer layer.  But in order to enable to the
lcd and backlight subsystems, the framebuffer has to be compiled also,
effectively sucking in a huge amount of unneeded code.

To prevent dependency problems, separate out the framebuffer notification
mechanism from the framebuffer layer and permanently link it to the kernel.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is currently no affected user in the tree, but usage is less
surprising that way.
Signed-off-by: NUwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reduce the likelihood of someone accidentally introducing namespace
collisions.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kprobe inserts breakpoint instruction in probepoint and then jumps to
instruction slot when breakpoint is hit, the instruction slot icache must
be consistent with dcache.  Here is the patch which invalidates instruction
slot icache area.

Without this patch, in some machines there will be fault when executing
instruction slot where icache content is inconsistent with dcache.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Acked-by: N"Luck, Tony" <tony.luck@intel.com>
Acked-by: NKeshavamurthy Anil S <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Enable delay accounting by default so that feature gets coverage testing
without requiring special measures.

Earlier, it was off by default and had to be enabled via a boot time param.
 This patch reverses the default behaviour to improve coverage testing.  It
can be removed late in the kernel development cycle if its believed users
shouldn't have to incur any cost if they don't want delay accounting.  Or
it can be retained forever if the utility of the stats is deemed common
enough to warrant keeping the feature on.
Signed-off-by: NShailabh Nagar <nagar@watson.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Complete the separation of delay accounting and taskstats by ignoring the
return value of delay accounting functions that fill in parts of taskstats
before it is sent out (either in response to a command or as part of a task
exit).

Also make delayacct_add_tsk return silently when delay accounting is turned
off rather than treat it as an error.
Signed-off-by: NShailabh Nagar <nagar@watson.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

IRQs need refcounting and a state flag to track whether the the IRQ should
be enabled or disabled as a "normal IRQ" source after a series of calls to
{en,dis}able_irq().  For shared IRQs, the IRQ must be enabled so long as at
least one driver needs it active.

Likewise, IRQs need the same support to track whether the IRQ should be
enabled or disabled as a "wakeup event" source after a series of calls to
{en,dis}able_irq_wake().  For shared IRQs, the IRQ must be enabled as a
wakeup source during sleep so long as at least one driver needs it.  But
right now they _don't have_ that refcounting ...  which means sharing a
wakeup-capable IRQ can't work correctly in some configurations.

This patch adds the refcount and flag mechanisms to set_irq_wake() -- which
is what {en,dis}able_irq_wake() call -- and minimal documentation of what
the irq wake mechanism does.

Drivers relying on the older (broken) "toggle" semantics will trigger a
warning; that'll be a handful of drivers on ARM systems.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Events sent by Process Events Connector from a 64-bit kernel are not binary
compatible with a 32-bit userspace program because the "timestamp" field
(struct timespec) is not arch independent.  This affects the fields that
follow "timestamp" as they will be be off by 8 bytes.

This is a problem for 32-bit userspace programs running with 64-bit kernels
on ppc64, s390, x86-64..  any "biarch" system.

Matt had submitted a different solution to lkml as an RFC earlier.  We have
since switched to a solution recommended by Evgeniy Polyakov.

This patch fixes the problem by changing the timestamp to be a __u64, which
stores the number of nanoseconds.

Tested on a x86_64 system with both 32 bit application and 64 bit
application and on a i386 system.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The inode number out of an NFS file handle gets passed eventually to
ext3_get_inode_block() without any checking.  If ext3_get_inode_block()
allows it to trigger an error, then bad filehandles can have unpleasant
effect - ext3_error() will usually cause a forced read-only remount, or a
panic if `errors=panic' was used.

So remove the call to ext3_error there and put a matching check in
ext3/namei.c where inode numbers are read off storage.

[akpm@osdl.org: fix off-by-one error]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: <stable@kernel.org>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

/proc/pal/*/version_info is a bit confusing.  HP firmware, at least,
reports 07.31 instead of 0.7.31.  Also, the comment is out of place;
it's an internal detail about the implementation of ia64_pal_version.
Since the 2.2 revision of the SDM still states that PAL_VERSION can
be called in virtual mode, correct the comment to be more accurate.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NTony Luck <tony.luck@intel.com>

It was broken before. But having it is important as possible hardware
bug workaround.

And previously there was no way to force swiotlb if there is another IOMMU.
Side effect is that iommu=force won't force swiotlb anymore even if there
isn't another IOMMU.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Calgary hits a NULL pointer dereference when booting in a multi-chassis
NUMA system.  See Redhat bugzilla number 198498, found by Konrad
Rzeszutek (konradr@redhat.com).

There are many issues that had to be resolved to fix this problem.
Firstly when I originally wrote the code to handle NUMA systems, I
had a large misunderstanding that was not corrected until now.  That was
that I thought the "number of nodes online" referred to number of
physical systems connected.  So that if NUMA was disabled, there
would only be 1 node and it would only show that node's PCI bus.
In reality if NUMA is disabled, the system displays all of the
connected chassis as one node but is only ignorant of the delays
in accessing main memory.  Therefore, references to num_online_nodes()
and MAX_NUMNODES are incorrect and need to be set to the maximum
number of nodes that can be accessed (which are 8).  I created a
variable, MAX_NUM_CHASSIS, and set it to 8 to fix this.

Secondly, when walking the PCI in detect_calgary, the code only
checked the first "slot" when looking to see if a device is present.
This will work for most cases, but unfortunately it isn't always the
case.  In the NUMA MXE drawers, there are USB devices present on the
3rd slot (with slot 1 being empty).  So, to work around this, all
slots (up to 8) are scanned to see if there are any devices present.

Lastly, the bus is being enumerated on large systems in a different
way the we originally thought.  This throws the ugly logic we had
out the window.  To more elegantly handle this, I reorganized the
kva array to be sparse (which removed the need to have any bus number
to kva slot logic in tce.c) and created a secondary space array to
contain the bus number to phb mapping.

With these changes Calgary boots on an x460 with 4 nodes with and
without NUMA enabled.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removed usage of HAVE_V4L1
Including videodev.h will just include videodev2.h if V4L1 is not supported
V4L1 code at core drivers will honor CONFIG_V4L1_COMPAT stuff
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

u64 is aligned as 128bits on x86_64 architetures, requiring an special
handling to ioctls that depends on v4l2_ext_control. 
Let's fix this before ext controls go to kernel mainstream to avoid one 
more compat32 stuff.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Check __must_check warnings for class_device_register and class_device_create_file

video_device_create_file was declared as a void, but instead should
return the int value of class_device_create_file.

Move the check from bttv-driver.c into v4l2-dev.h, because all other
callers of video_device_create_file must also be checked.

Replace the call to class_device_create_file in videodev.c with
video_device_create_file, as defined in v4l2-dev.h, so that the
return value of class_device_create_file will be checked.

Check the return value of class_device_register in videodev.c and
pvrusb2-sysfs.c
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix robust PI-futexes to be properly unlocked on unexpected exit.

For this to work the kernel has to know whether a futex is a PI or a
non-PI one, because the semantics are different.  Since the space in
relevant glibc data structures is extremely scarce, the best solution is
to encode the 'PI' information in bit 0 of the robust list pointer.
Existing (non-PI) glibc robust futexes have this bit always zero, so the
ABI is kept.  New glibc with PI-robust-futexes will set this bit.

Further fixes from Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In x86_64 platform, INT1 and INT3 trap stack is IST stack called DEBUG_STACK,
when INT1/INT3 trap happens, system will switch to DEBUG_STACK by hardware.
Current DEBUG_STACK size is 4K, when int1/int3 trap happens, kernel will
minus current DEBUG_STACK IST value by 4k. But if int3/int1 trap is nested,
it will destroy other vector's IST stack. This patch modifies this, it sets
DEBUG_STACK size as 8K and allows two level of nested int1/int3 trap.

Kprobe DEBUG_STACK may be nested, because kprobe handler may be probed
by other kprobes.

Thanks jbeulich for pointing out error in the first patch.

[AK: nested kprobes are pretty dubious. Hopefully one nest
will be enough. This will cost 8K per CPU (4K more than before)]
Signed-off-by: Nbibo, mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some drives claim they support cache flushing, but get seriously
confused if you try. Add this option to be able to boot with
barriers enabled by default.
Signed-off-by: NJens Axboe <axboe@suse.de>