- 08 2月, 2007 10 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following cleanups: - move all EXPORT_SYMBOL's directly below the code they are exporting - move all DECLARE_PCI_FIXUP_*'s directly below the functions they are calling Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linas Vepstas 提交于
Use newly minted routine to access the PCI channel state. Signed-off-by: NLinas Vepstas <linas@linas.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linas Vepstas 提交于
Add very simple routine to indicate the pci channel error state. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hidetoshi Seto 提交于
This patch adds the following changes into generic PCI code especially for PCI legacy I/O port free drivers. - Added new pci_request_selected_regions() and pci_release_selected_regions() for PCI legacy I/O port free drivers in order to request/release only the selected regions. - Added helper routine pci_select_bars() which makes proper mask of BARs from the specified resource type. This would be very helpful for users of pci_enable_device_bars(). Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hidetoshi Seto 提交于
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled". This 3 of 3 patches does: - add __pci_reenable_device (recover former change of 1st patch) Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hidetoshi Seto 提交于
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled". This 2 of 3 patches does: - Move pci_fixup_device and enable_cnt (originally intended change) - relocate pci_fixup_device (recover latter change of 1st patch) Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hidetoshi Seto 提交于
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled". This 1 of 3 patches does: - reverts small part of Inaky's patch (remove __pci_enable_device) This change will be recovered by 3rd patch. - temporarily remove pci_fixup_device. This change will be recovered by 2nd patch. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yinghai Lu 提交于
For pci mem resource that size is bigger than 4G, the sz returned by pc_size will be 0. So that resource is skipped, and register contained hi address will be treated as another 32bit resource. We need to use sz64 and pci_sz64 for 64 bit resource for clear logical. Typical usages for this: Opteron system with co-processor and the co-processor could take more than 4G RAM as pre-fetchable mem resource. Signed-off-by: NYinghai Lu <yinghai.lu@amd.com> Cc: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: Remove incorrect kgdb define JFS: call io_schedule() instead of schedule() to avoid deadlock JFS: Add lockdep annotations JFS: Avoid BUG() on a damaged file system
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits) [GFS2] make gfs2_writepages() static [GFS2] Unlock page on prepare_write try lock failure [GFS2] nfsd readdirplus assertion failure [DLM] fix softlockup in dlm_recv [DLM] zero new user lvbs [DLM/GFS2] indent help text [GFS2] Fix unlink deadlocks [GFS2] Put back semaphore to avoid umount problem [GFS2] more CURRENT_TIME_SEC [GFS2/DLM] fix GFS2 circular dependency [GFS2/DLM] use sysfs [GFS2] make lock_dlm drop_count tunable in sysfs [GFS2] increase default lock limit [GFS2] Fix list corruption in lops.c [GFS2] Fix recursive locking attempt with NFS [DLM] can miss clearing resend flag [DLM] saved dlm message can be dropped [DLM] Make sock_sem into a mutex [GFS2] Fix typo in glock.c [GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2 ...
-
- 07 2月, 2007 30 次提交
-
-
由 Adrian Bunk 提交于
On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote: >... > Changes since 2.6.20-rc6-mm2: >... > git-gfs2-nmw.patch >... > git trees >... This patch makes the needlessly global gfs2_writepages() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
When the try lock of the glock failed in prepare_write we were incorrectly exiting this function with the page still locked. This was resulting in further I/O to this page hanging. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] swiotlb abstraction (e.g. for Xen) [IA64] swiotlb cleanup [IA64] make swiotlb use bus_to_virt/virt_to_bus [IA64] swiotlb bug fixes [IA64] Hook up getcpu system call for IA64 [IA64] clean up sparsemem memory_present call [IA64] show_mem() for IA64 sparsemem NUMA [IA64] missing exports hwsw_sync_... [IA64] virt_to_page() can be called with NULL arg [IA64] alignment bug in ldscript [IA64] register memory ranges in a consistent manner [IA64] Enable SWIOTLB only when needed [IA64-SGI] Check for TIO errors on shub2 Altix [IA64] remove bogus prototype ia64_esi_init() [IA64] Clear IRQ affinity when unregistered [IA64] fix ACPI Kconfig issues [IA64] Fix NULL-pointer dereference in ia64_machine_kexec() [IA64] find thread for user rbs address [IA64] use snprintf() on features field of /proc/cpuinfo [IA64] enable singlestep on system call ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: ocfs2_link() journal credits update
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: USB HID: handle multi-interface devices for Apple macbook pro properly HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG USB HID: fix bogus comment in hid_get_class_descriptor() USB HID: remove hid_find_field_by_usage() HID: API - fix leftovers of hidinput API in USB HID HID: hid debug from hid-debug.h to hid layer hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter hid: quirk for multi-input devices with unneeded output reports hid: allow force feedback for multi-input devices
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Remove obsolete prototypes IB/ehca: Remove use of do_mmap() RDMA/addr: Handle ethernet neighbour updates during route resolution IB: Make sure struct ib_user_mad.data is aligned IB/srp: Don't wait for response when QP is in error state. IB: Return qp pointer as part of ib_wc IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits) mmc: tifm: replace kmap with page_address mmc: sdhci: fix voltage ocr mmc: sdhci: replace kmap with page_address mmc: wbsd: replace kmap with page_address mmc: handle pci_enable_device() return value in sdhci mmc: Proper unclaim in mmc_block mmc: change wbsd mailing list mmc: Graceful fallback for fancy features mmc: Handle wbsd's stupid command list mmc: Allow host drivers to specify max block count mmc: Allow host drivers to specify a max block size tifm_sd: add suspend and resume functionality tifm_core: add suspend/resume infrastructure for tifm devices tifm_7xx1: prettify tifm_7xx1: recognize device 0xac8f as supported tifm_7xx1: switch from workqueue to kthread tifm_7xx1: Merge media insert and media remove functions tifm_7xx1: simplify eject function Add dummy_signal_irq function to save check in ISR Remove unused return value from signal_irq callback ...
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (37 commits) [S390] Avoid excessive inlining. [S390] Mark kernel text section read-only. [S390] Convert memory detection into C code. [S390] Calibrate delay and bogomips. [S390] Hypervisor filesystem (s390_hypfs) for z/VM [S390] Add crypto support for 3592 tape devices [S390] boot from NSS support [S390] Support for s390 Pseudo Random Number Generator [S390] ETR support. [S390] noexec protection [S390] move crypto options and some cleanup. [S390] cio: Don't spam debug feature. [S390] Cleanup of CHSC event handling. [S390] cio: declare hardware structures packed. [S390] Add set_fs(USER_DS) to start_thread(). [S390] cio: Catch operand exceptions on stsch. [S390] Fix register usage description. [S390] kretprobe_trampoline_holder() in wrong section. [S390] Fix kprobes breakpoint handling. [S390] Update maintainers file. ...
-
由 David Howells 提交于
Fix the key serial number collision avoidance code in key_alloc_serial(). This didn't use to be so much of a problem as the key serial numbers were allocated from a simple incremental counter, and it would have to go through two billion keys before it could possibly encounter a collision. However, now that random numbers are used instead, collisions are much more likely. This is fixed by finding a hole in the rbtree where the next unused serial number ought to be and using that by going almost back to the top of the insertion routine and redoing the insertion with the new serial number rather than trying to be clever and attempting to work out the insertion point pointer directly. This fixes kernel BZ #7727. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Minor cleanup [CIFS] Missing free in error path [CIFS] Reduce cifs stack space usage [CIFS] lseek polling returned stale EOF
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits) [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro [MIPS] Fix warnings in run_uncached on 32bit kernel [MIPS] Comment fix [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype. [MIPS] Alchemy: Fix PCI-memory access [MIPS] Move .set reorder out of conditional code [MIPS] Check FCSR for pending interrupts before restoring from a context. [MIPS] Jaguar ATX: Fix large number of warnings. [MIPS] Jaguar: Fix MAC address detection after platform_device conversion. [MIPS] SMTC: Make a bunch of functions and variables static. [MIPS] Use compat_sys_pselect6 [MIPS] SMTC: Cleanup idle hook invocation. [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity [MIPS] IRIX: Linux coding style cleanups. [MIPS] PB1100: Fix pile of warnings [MIPS] Alchemy: Fix bunch of warnings [MIPS] Whitespace cleanups. [MIPS] Alchemy: Fix bunch more warnings. [MIPS] Use ARRAY_SIZE macro when appropriate [MIPS] Fix some whitespace damage ...
-
由 Oleg Verych 提交于
Tildes as in path as in filenames are handled correctly now: only files, containing tilde '~', are backups, thus are not valid. [KJ]: Definition of `space' was removed, scripts/Kbuild.include has one. That definition was taken right from the GNU make manual, while Kbuild's version is original. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Bastian Blank <bastian@waldi.eu.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Verych 提交于
GNU binutils, root users, tmpfiles, external modules ro builds must be fixed to do the right thing now. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Horst Schirmeier <horst@schirmeier.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Daniel Drake <dsd@gentoo.org> Cc: Andi Kleen <ak@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Verych 提交于
Replacing overhead of using some (external) programs instead of good old `sh'. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: William Stearns <wstearns@pobox.com> Cc: Martin Schlemmer <azarah@nosferatu.za.org> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Acked-by: NMark Lord <lkml@rtr.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve French 提交于
Missing tab. Missing entry in changelog Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
arch/mips/lib/uncached.c: In function 'run_uncached': arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexander Bigga 提交于
The problem was introduced in 2.6.18.3 with the casting of some 36bit-defines (PCI memory) in au1000.h to resource_size_t which may be u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT. With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed because the ioremap in arch/mips/au1000/common/pci.c already used the truncated addresses. With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c fails because the maximum iomem-address is 0xffffffff (32bit) but the pci-memory-start-address is 0x440000000 (36bit). To get pci working again, I propose the following patch: 1. remove the resource_size_t-casting from au1000.h again 2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and necessary here. The 36bit-handling will be done in __fixup_bigphys_addr). With this patch pci works again like in 2.6.18.2, the gcc-compile warnings in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL. Signed-off-by: NAlexander Bigga <ab@mycable.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joseph S. Myers 提交于
The N32 and O32 pselect6 syscalls need to use compat_sys_pselect6 to translate arguments from 32-bit to 64-bit layout. Signed-off-by: NJoseph Myers <joseph@codesourcery.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Quigley 提交于
This patch adds LSM hooks into the setaffinity and getaffinity functions for the mips architecture to enable security modules to control these operations between tasks with different security attributes. This implementation uses the existing task_setscheduler and task_getscheduler LSM hooks. Signed-Off-By: NDavid Quigley <dpquigl@tycho.nsa.gov> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
CC arch/mips/au1000/pb1100/board_setup.o arch/mips/au1000/pb1100/board_setup.c: In function ‘board_setup’: arch/mips/au1000/pb1100/board_setup.c:104: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:109: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_clksrc’ arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_freqctrl’ arch/mips/au1000/pb1100/board_setup.c:50: warning: unused variable ‘pin_func’ Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-