If multiple tasks attempt to read the stats, it may happen that the
start_req_done completion is re-initialized while still being used by
another task, causing a list corruption.

This patch fixes the bug by adding a mutex to serialize the calls to
bnx2fc_get_host_stats().

WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted)
Hardware name: PowerEdge R820
list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588

Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1
Call Trace:
 [<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0
 [<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60
 [<ffffffff812ad16e>] ? list_del+0x6e/0xa0
 [<ffffffff81547eed>] ? wait_for_common+0x14d/0x180
 [<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20
 [<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20
 [<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc]
 [<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc]
 [<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc]
 [<ffffffff8137c647>] ? dev_attr_show+0x27/0x50
 [<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50
 [<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200
 [<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0
 [<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50
 [<ffffffff8119a651>] ? sys_read+0x51/0xb0
 [<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290
 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Acked-by: NChad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When pci_enable_device() or pci_enable_device_mem() fail in
qla2x00_probe_one() we bail out but do a call to
pci_disable_device(). This causes the dev_WARN_ON() in
pci_disable_device() to trigger, as the device wasn't enabled
previously.

So instead of taking the 'probe_out' error path we can directly return
*iff* one of the pci_enable_device() calls fails.

Additionally rename the 'probe_out' goto label's name to the more
descriptive 'disable_device'.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Fixes: e315cd28 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: <stable@vger.kernel.org>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NGiridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

skb->data is assigned to task->hdr in cxgbi_conn_alloc_pdu(),
skb gets freed after tx but task->hdr is still dereferenced in
iscsi_tcp_task_xmit() to avoid this call skb_get() after allocating skb
and free the skb in cxgbi_cleanup_task() or before allocating new skb in
cxgbi_conn_alloc_pdu().
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

max_fin_rt is the maximum re-transmission of FIN packets
as part of the termination flow. After reaching this value
the FW will send a single RESET.
Signed-off-by: NNilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

RIP: 0010:qedi_set_path+0x114/0x570 [qedi]
 Call Trace:
  [<ffffffffa0472923>] iscsi_if_recv_msg+0x623/0x14a0
  [<ffffffff81307de6>] ? rhashtable_lookup_compare+0x36/0x70
  [<ffffffffa047382e>] iscsi_if_rx+0x8e/0x1f0
  [<ffffffff8155983d>] netlink_unicast+0xed/0x1b0
  [<ffffffff81559c30>] netlink_sendmsg+0x330/0x770
  [<ffffffff81510d60>] sock_sendmsg+0xb0/0xf0
  [<ffffffff8101360b>] ? __switch_to+0x17b/0x4b0
  [<ffffffff8163a2c8>] ? __schedule+0x2d8/0x900
  [<ffffffff81511199>] ___sys_sendmsg+0x3a9/0x3c0
  [<ffffffff810e2298>] ? get_futex_key+0x1c8/0x2b0
  [<ffffffff810e25a0>] ? futex_wake+0x80/0x160
Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

munmap done by iscsiuio during a stop of the service triggers a "bad
pte" warning sometimes. munmap kernel path goes through the mmapped
pages and has a validation check for mapcount (in struct page) to be
zero or above. kzalloc, which we had used to allocate udev->ctrl, uses
slab allocations, which re-uses mapcount (union) for other purposes that
can make the mapcount look negative. Avoid all these trouble by invoking
one of the __get_free_pages wrappers to be used instead of kzalloc for
udev->ctrl.

 BUG: Bad page map in process iscsiuio  pte:80000000aa624067 pmd:3e6777067
 page:ffffea0002a98900 count:2 mapcount:-2143289280
     mapping: (null) index:0xffff8800aa624e00
 page flags: 0x10075d00000090(dirty|slab)
 page dumped because: bad pte
 addr:00007fcba70a3000 vm_flags:0c0400fb anon_vma: (null)
     mapping:ffff8803edf66e90 index:0

 Call Trace:
     dump_stack+0x19/0x1b
     print_bad_pte+0x1af/0x250
     unmap_page_range+0x7a7/0x8a0
     unmap_single_vma+0x81/0xf0
     unmap_vmas+0x49/0x90
     unmap_region+0xbe/0x140
     ? vma_rb_erase+0x121/0x220
     do_munmap+0x245/0x420
     vm_munmap+0x41/0x60
     SyS_munmap+0x22/0x30
     tracesys+0xdd/0xe2
Signed-off-by: NArun Easi <arun.easi@cavium.com>
Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

rdac_failover_get references struct rdac_controller as
ctlr->ms_sdev->handler_data->ctlr for no apparent reason. Besides being
inefficient this also introduces a null-pointer dereference as
send_mode_select() sets ctlr->ms_sdev to NULL before calling
rdac_failover_get():

[   18.432550] device-mapper: multipath service-time: version 0.3.0 loaded
[   18.436124] BUG: unable to handle kernel NULL pointer dereference at 0000000000000790
[   18.436129] IP: send_mode_select+0xca/0x560
[   18.436129] PGD 0
[   18.436130] P4D 0
[   18.436130]
[   18.436132] Oops: 0000 [#1] SMP
[   18.436133] Modules linked in: dm_service_time sd_mod dm_multipath amdkfd amd_iommu_v2 radeon(+) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qla2xxx drm serio_raw scsi_transport_fc bnx2 i2c_core dm_mirror dm_region_hash dm_log dm_mod
[   18.436143] CPU: 4 PID: 443 Comm: kworker/u16:2 Not tainted 4.12.0-rc1.1.el7.test.x86_64 #1
[   18.436144] Hardware name: IBM BladeCenter LS22 -[79013SG]-/Server Blade, BIOS -[L8E164AUS-1.07]- 05/25/2011
[   18.436145] Workqueue: kmpath_rdacd send_mode_select
[   18.436146] task: ffff880225116a40 task.stack: ffffc90002bd8000
[   18.436148] RIP: 0010:send_mode_select+0xca/0x560
[   18.436148] RSP: 0018:ffffc90002bdbda8 EFLAGS: 00010246
[   18.436149] RAX: 0000000000000000 RBX: ffffc90002bdbe08 RCX: ffff88017ef04a80
[   18.436150] RDX: ffffc90002bdbe08 RSI: ffff88017ef04a80 RDI: ffff8802248e4388
[   18.436151] RBP: ffffc90002bdbe48 R08: 0000000000000000 R09: ffffffff81c104c0
[   18.436151] R10: 00000000000001ff R11: 000000000000035a R12: ffffc90002bdbdd8
[   18.436152] R13: ffff8802248e4390 R14: ffff880225152800 R15: ffff8802248e4400
[   18.436153] FS:  0000000000000000(0000) GS:ffff880227d00000(0000) knlGS:0000000000000000
[   18.436154] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   18.436154] CR2: 0000000000000790 CR3: 000000042535b000 CR4: 00000000000006e0
[   18.436155] Call Trace:
[   18.436159]  ? rdac_activate+0x14e/0x150
[   18.436161]  ? refcount_dec_and_test+0x11/0x20
[   18.436162]  ? kobject_put+0x1c/0x50
[   18.436165]  ? scsi_dh_activate+0x6f/0xd0
[   18.436168]  process_one_work+0x149/0x360
[   18.436170]  worker_thread+0x4d/0x3c0
[   18.436172]  kthread+0x109/0x140
[   18.436173]  ? rescuer_thread+0x380/0x380
[   18.436174]  ? kthread_park+0x60/0x60
[   18.436176]  ret_from_fork+0x2c/0x40
[   18.436177] Code: 49 c7 46 20 00 00 00 00 4c 89 ef c6 07 00 0f 1f 40 00 45 31 ed c7 45 b0 05 00 00 00 44 89 6d b4 4d 89 f5 4c 8b 75 a8 49 8b 45 20 <48> 8b b0 90 07 00 00 48 8b 56 10 8b 42 10 48 8d 7a 28 85 c0 0f
[   18.436192] RIP: send_mode_select+0xca/0x560 RSP: ffffc90002bdbda8
[   18.436192] CR2: 0000000000000790
[   18.436198] ---[ end trace 40f3e4dca1ffabdd ]---
[   18.436199] Kernel panic - not syncing: Fatal exception
[   18.436222] Kernel Offset: disabled
[-- MARK -- Thu May 18 11:45:00 2017]

Fixes: 32782557 scsi_dh_rdac: switch to scsi_execute_req_flags()
Cc: stable@vger.kernel.org
Signed-off-by: NArtem Savkov <asavkov@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In lower layer driver's (LLD) scsi_host_template, the driver may
optionally ask SCSI to allocate its private driver memory for each
command, by specifying cmd_size. This memory is allocated at the end of
scsi_cmnd by SCSI.  Later when SCSI queues a command, the LLD can use
scsi_cmd_priv to get to its private data.

Some LLD, e.g. hv_storvsc, doesn't clear its private data before use. In
this case, the LLD may get to stale or uninitialized data in its private
driver memory. This may result in unexpected driver and hardware
behavior.

Fix this problem by also zeroing the private driver memory before
passing them to LLD.
Signed-off-by: NLong Li <longli@microsoft.com>
Reviewed-by: NBart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: NKY Srinivasan <kys@microsoft.com>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
CC: <stable@vger.kernel.org> # 4.11+
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

mbp pointer is passed to csio_hw_validate_caps() so call mempool_free()
after calling csio_hw_validate_caps().
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Fixes: 541c571f ("csiostor:Use firmware version from cxgb4/t4fw_version.h")
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When reloading module these two attributes aren't cleaned up properly
and they persist causing warnings when trying to load module
again. Additionally they are not recreated properly due to that.
Signed-off-by: NMichał Potomski <michalx.potomski@intel.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

fix build issue if NVME_FC_TARGET is not defined. noop the code.  The
code will never be invoked if target mode is not enabled.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Recent commit on patchset "lpfc updates for 11.2.0.14" fixed an issue
about dereferencing a NULL pointer on port reset. The specific commit,
named "lpfc: Fix system crash when port is reset.", is missing a check
against NULL pointer on lpfc_els_flush_cmd() though.

Since we destroy the queues on adapter resets, like in PCI error
recovery path, we need the validation present on this patch in order to
avoid a NULL pointer dereference when trying to flush commands of ELS
wq, after it has been destroyed (which would lead to a kernel oops).
Tested-by: NRaphael Silva <raphasil@linux.vnet.ibm.com>
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Change driver version to 11.2.0.14.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Added code to support Cisco MDS loopback diagnostic. The diagnostics run
various loopbacks including one which loops-back frame through the
driver.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Code review of NVMEI's FC_PORT_ROLE_NVME_DISCOVERY looked wrong.

Discussions with storage architecture team clarified NVMEI's audit of
the PRLI response port roles.  Following up discussion with code review
showed a few minor corrections were required - especially in
anticipation of NVME auto discovery.

During PRLI, NVMEI should sent prli_init - which it it does.  NVMET
should send prli_tgt and prli_disc - which it does.  When NVMEI receives
a PRLI Response now, it audits the incoming target bits and stores the
attributes in the corresponding NDLP.  Later, when NVMEI registers the
NVME rport, it uses the stored ndlp attributes to set the rport
port_roles correctly.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Too many work items being processed in IRQ context take a lot of CPU
time and cause problems.

With a recent change, we get out of the ISR after hitting entry_repost
work items on a queue. However, the actual values for entry repost are
still high. EQ is 128 and CQ is 128, this could translate into
processing 128 * 128 (16384) work items under IRQ context.

Set entry_repost in the actual queue creation routine now.  Limit EQ
repost to 8 and CQ repost to 64 to further limit the amount of time
spent in the IRQ.

Fix fof IRQ routines as well.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When unloading and reloading the driver, the driver fails to recreate
the lpfc root inode in the debugfs tree.

The driver is incorrectly removing the lpfc root inode in
lpfc_debugfs_terminate in the first driver instance that unloads and
then sets the lpfc_debugfs_root global parameter to NULL.  When the
final driver instance unloads, the debugfs calls quietly ignore the
remove on a NULL pointer.  The bug is that the debugfs_remove call
returns void so the driver doesn't know to correctly set the global
parameter to NULL.

Base the debugfs_remove of the lpfc_debugfs_root parameter on
lpfc_debugfs_hba_count because this parameter tracks the fnX instance
tracked per driver instance.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When the driver send the RPA command, it does not send supported FC4
Type NVME to the management server.

Encode NVME (type x28) in the AttribEntry in the RPA command.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Previous logic would just drop the IO.

Added logic to queue the IO to wait for an IO context resource from an
IO thats already in progress.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently IO resources are mapped 1 to 1 with RQ buffers posted

Added logic to separate RQE buffers from IO op resources
(sgl/iocbq/context). During initialization, the driver will determine
how many SGLs it will allocate for NVMET (based on what the firmware
reports) and associate a NVMET IOCBq and NVMET context structure with
each one.

Now that hdr/data buffers are immediately reposted back to the RQ, 512
RQEs for each MRQ is sufficient. Also, since NVMET data buffers are now
128 bytes, lpfc_nvmet_mrq_post is not necessary anymore as we will
always post the max (512) buffers per NVMET MRQ.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Using 2048 byte buffer and onle 128 bytes is needed.

Create nee LFPC_NVMET_DATA_BUF_SIZE define to use for NVMET RQ/MRQs.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After running IOPS test for 30 second we get kernel:NMI watchdog:
Watchdog detected hard LOCKUP on cpu 0

The driver is speend too much time in its ISR.

In ISR EQ and CQ processing routines, if we hit the entry_repost numbers
of EQE/CQEs just break out of the routine as opposed to hitting the
doorbell with NOARM and continue processing.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During driver boot, a latency in the NVMET driver side causes the
incoming NVMEI PRLI to get rejected by the NVMET driver.  When this
happens, the NVMEI driver runs out of PRLI retries.  Bouncing the link
does not fix the situation.

If the NVMEI driver decides, on PRLI completion failures, to retry the
PRLI, always decrement the fc4_prli_sent counter.  This allows the PRLI
completion to resolve to UNMAPPED when NVMET rejects the PRLI.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Large block writes to the nvme target were failing because the default
number of RQs posted was insufficient.

Expand the NVMET RQs to 2048 RQEs and ensure a minimum of 512 RQEs are
posted, no matter how many MRQs are configured.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

More debug messages added for nvme statistics.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver panic when using the els_wq during port reset.

Check for NULL els_wq before dereferencing.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

With 255 vports created a link trasition can casue a crash.

When going through discovery after a link bounce the driver is using
rpis before the cmd FCOE_POST_HDR_TEMPLATES completes. By doing that the
next rpi bumps the rpi range out of the boundary.

The fix it to increment the next_rpi only when the
FCOE_POST_HDR_TEMPLATE succeeds.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Previous assignment was causing the use of the uninitialized variable
_explan_ inside fc_seq_ls_rjt() function, which in this particular case
is being called by fc_seq_els_rsp_send().

[mkp: fixed typo]

Addresses-Coverity-ID: 1398125
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some external hard drives don't support the sync command even though the
hard drive has write cache enabled. In this case, upon suspend request,
sync cache failures are ignored if the error code in the sense header is
ILLEGAL_REQUEST. There's not much we can do for these drives, so we
shouldn't fail to suspend for this error case. The drive may stay
powered if that's the setup for the port it's plugged into.
Signed-off-by: NDerek Basehore <dbasehore@chromium.org>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If the list search in sg_get_rq_mark() fails to find a valid request, we
return a bogus element. This then can later lead to a GPF in
sg_remove_scat().

So don't return bogus Sg_requests in sg_get_rq_mark() but NULL in case
the list search doesn't find a valid request.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Doug Gilbert <dgilbert@interlog.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Acked-by: NDoug Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For a zoned block device, sd_zbc_complete() handles zone write unlock on
completion of a REQ_OP_WRITE_ZEROES command but the zone write locking
is missing from sd_setup_write_zeroes_cmnd(). This patch fixes this
problem by locking the target zone of a REQ_OP_WRITE_ZEROES request.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi_io_init() may fail, leaving a zone of a zoned block device locked.
Fix this by properly unlocking the write same request target zone if
scsi_io_init() fails.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The 2nd check to see if request_size is less than zero is redundant
because the first check takes error exit path on this condition. So,
since it is redundant, remove it.

Detected by CoverityScan, CID#146149 ("Logically Dead Code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

I believe there is a typo on the wq destroy of els_wq, currently the
driver is checking if els_cq is not null and I think this should be a
check on els_wq instead.

Detected by CoverityScan, CID#1411629 ("Copy-paste error")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver now uses IRQ_POLL and needs to select it to avoid the
following build error.

ERROR: ".irq_poll_complete" [drivers/scsi/cxlflash/cxlflash.ko] undefined!
ERROR: ".irq_poll_sched" [drivers/scsi/cxlflash/cxlflash.ko] undefined!
ERROR: ".irq_poll_disable" [drivers/scsi/cxlflash/cxlflash.ko] undefined!
ERROR: ".irq_poll_init" [drivers/scsi/cxlflash/cxlflash.ko] undefined!

Fixes: cba06e6d ("scsi: cxlflash: Implement IRQ polling for RRQ processing")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Using memcpy() from a string that is shorter than the length copied
means the destination buffer is being filled with arbitrary data from
the kernel rodata segment. Instead, use strncpy() which will fill the
trailing bytes with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NChad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>