Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 31 8月, 2012 6 次提交
  3. 23 8月, 2012 13 次提交
    • S
      usb: renesas_usbhs: modify the irq handler for sharing irq · 4e177260
      由 Shimoda, Yoshihiro 提交于 
      When IORESOURCE_IRQ_SHAREABLE is set, the irq handler may be called
even if the interupt of the USB module doesn't happen. So, it may
clear the interrupt flags by mistake. This patch fixes it.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      4e177260
    • A
      usb: gadget: use %pm to print mac addresses · 8c7ca992
      由 Andy Shevchenko 提交于 
      %pm already provides pretty print for mac addresses, let's
use that and drop homebrew mac address printing.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      8c7ca992
    • K
      usb: gadget: udc-core: Race between disconnect/unbind and setup · 974e9323
      由 Kevin Cernekee 提交于 
      usb_gadget_remove_driver() runs through a four-step sequence to shut down
the gadget driver.  For the case of a composite gadget + at91 UDC, this
would look like:

    udc->driver->disconnect(udc->gadget);          // composite_disconnect()
    usb_gadget_disconnect(udc->gadget);            // at91_pullup(gadget, 0)
    udc->driver->unbind(udc->gadget);              // composite_unbind()
    usb_gadget_udc_stop(udc->gadget, udc->driver); // at91_stop()

The UDC driver can receive SETUP packets from the host up until the
point when usb_gadget_disconnect() returns.  On rare occasions, the
gadget driver may see this sequence:

    udc->driver->disconnect(udc->gadget);          // composite_disconnect()
    udc->driver->setup(udc->gadget, &ctrl);        // composite_setup()
    udc->driver->unbind(udc->gadget);              // composite_unbind()

Some gadget drivers, such as composite, assume this will never happen
and crash as a result.

The fix is to quiesce the UDC hardware (via usb_gadget_disconnect)
before running the gadget driver through the disconnect/unbind sequence.
Reviewed-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      974e9323
    • A
      usb: gadget: use native print_hex_dump_bytes() · d3091cff
      由 Andy Shevchenko 提交于 
      Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      d3091cff
    • D
      usb: gadget: s3c-hsotg: fix core reset timeout failure · 2868fea2
      由 Du, Changbin 提交于 
      The timeout values were 1000 and timeout issue occured many times on my
s3c6410 Soc based board (mostly when booting whith USB cable not
connected). This patch increase the values to 10000 to guarantee the
success of reset.

Having set timeout to 10000, I printed the remained timeout values
which could cause timeout issue before this change (tested several
times).
the first timeout value remained:
	timeout = 8079
	timeout = 8079
	timeout = 8078
	timeout = 8081
the second timeout value remained:
	timeout = 7940
	timeout = 7945
	timeout = 7940
	timeout = 7938
Seeing from above values, I think the value 10000 is big enough.
Signed-off-by: NDu, Changbin <changbin.du@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      2868fea2
    • M
      usb composite: fix locking in usb_function_activate · 4fefe9f6
      由 Michael Grzeschik 提交于 
      The lockdep hunter mentions a non consistent usage of spin_lock and
spin_lock_irqsafe in the composite_disconnect and usb_function_activate
function:

[   15.700897] =================================
[   15.705255] [ INFO: inconsistent lock state ]
[   15.709617] 3.5.0-rc5+ #413 Not tainted
[   15.713453] ---------------------------------
[   15.717812] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[   15.723822] uvc-gadget/116 [HC1[1]:SC0[0]:HE0:SE1] takes:
[   15.729222]  (&(&cdev->lock)->rlock){?.+...}, at: [<7f0049e8>] composite_disconnect+0x2c/0x74 [g_webcam]
[   15.738797] {HARDIRQ-ON-W} state was registered at:
[   15.743677]   [<8006de3c>] mark_lock+0x148/0x688
[   15.748325]   [<8006ecb0>] __lock_acquire+0x934/0x1b74
[   15.753481]   [<8007047c>] lock_acquire+0x98/0x138
[   15.758288]   [<804c776c>] _raw_spin_lock+0x4c/0x84
[   15.763188]   [<7f006ae4>] usb_function_activate+0x28/0x94 [g_webcam]
[   15.769652]   [<7f00820c>] usb_ep_autoconfig_reset+0x78/0x98 [g_webcam]
[   15.776287]   [<7f0082a4>] uvc_v4l2_open+0x78/0x94 [g_webcam]
[   15.782054]   [<80366a38>] v4l2_open+0x104/0x130
[   15.786697]   [<800efd30>] chrdev_open+0xa0/0x170
[   15.791423]   [<800e9718>] do_dentry_open.isra.13+0x1e8/0x264
[   15.797186]   [<800ea5d4>] nameidata_to_filp+0x58/0x94
[   15.802340]   [<800fa29c>] do_last.isra.31+0x2a0/0x808
[   15.807497]   [<800faa40>] path_openat+0xc8/0x3e8
[   15.812216]   [<800fae90>] do_filp_open+0x3c/0x90
[   15.816936]   [<800ea6fc>] do_sys_open+0xec/0x184
[   15.821655]   [<800ea7c4>] sys_open+0x30/0x34
[   15.826027]   [<8000e5c0>] ret_fast_syscall+0x0/0x48
[   15.831015] irq event stamp: 6048
[   15.834330] hardirqs last  enabled at (6047): [<804c81b8>] _raw_spin_unlock_irqrestore+0x40/0x54
[   15.843132] hardirqs last disabled at (6048): [<8000e174>] __irq_svc+0x34/0x60
[   15.850370] softirqs last  enabled at (5940): [<80028380>] __do_softirq+0x188/0x270
[   15.858043] softirqs last disabled at (5935): [<80028944>] irq_exit+0xa0/0xa8
[   15.865195]
[   15.865195] other info that might help us debug this:
[   15.871724]  Possible unsafe locking scenario:
[   15.871724]
[   15.877645]        CPU0
[   15.880091]        ----
[   15.882537]   lock(&(&cdev->lock)->rlock);
[   15.886659]   <Interrupt>
[   15.889278]     lock(&(&cdev->lock)->rlock);
[   15.893573]
[   15.893573]  *** DEADLOCK ***
[   15.893573]
[   15.899496] no locks held by uvc-gadget/116.
[   15.903765]
[   15.903765] stack backtrace:
[   15.908125] Backtrace:
[   15.910604] [<80012038>] (dump_backtrace+0x0/0x114) from [<804bf8a4>] (dump_stack+0x20/0x24)
[   15.919043]  r6:dfb8e6f0 r5:dfb8e400 r4:809717ec r3:60000193
[   15.924766] [<804bf884>] (dump_stack+0x0/0x24) from [<804c0c0c>] (print_usage_bug+0x258/0x2c0)
[   15.933388] [<804c09b4>] (print_usage_bug+0x0/0x2c0) from [<8006e240>] (mark_lock+0x54c/0x688)
[   15.942006] [<8006dcf4>] (mark_lock+0x0/0x688) from [<8006edb8>] (__lock_acquire+0xa3c/0x1b74)
[   15.950625] [<8006e37c>] (__lock_acquire+0x0/0x1b74) from [<8007047c>] (lock_acquire+0x98/0x138)
[   15.959418] [<800703e4>] (lock_acquire+0x0/0x138) from [<804c78fc>] (_raw_spin_lock_irqsave+0x58/0x94)
[   15.968736] [<804c78a4>] (_raw_spin_lock_irqsave+0x0/0x94) from [<7f0049e8>] (composite_disconnect+0x2c/0x74 [g_webcam])
[   15.979605]  r7:00000012 r6:df82b0c4 r5:ded755bc r4:ded75580
[   15.985331] [<7f0049bc>] (composite_disconnect+0x0/0x74 [g_webcam]) from [<8033c170>] (_gadget_stop_activity+0xc4/0x120)
[   15.996200]  r6:df82b0c4 r5:df82b0c8 r4:df82b0d0 r3:7f0049bc
[   16.001919] [<8033c0ac>] (_gadget_stop_activity+0x0/0x120) from [<8033e390>] (udc_irq+0x724/0xcb8)
[   16.010877]  r6:df82b010 r5:00000000 r4:df82b010 r3:00000000
[   16.016595] [<8033dc6c>] (udc_irq+0x0/0xcb8) from [<8033baec>] (ci_irq+0x64/0xdc)
[   16.024086] [<8033ba88>] (ci_irq+0x0/0xdc) from [<80086538>] (handle_irq_event_percpu+0x74/0x298)
[   16.032958]  r5:807fd414 r4:df38fdc0
[   16.036566] [<800864c4>] (handle_irq_event_percpu+0x0/0x298) from [<800867a8>] (handle_irq_event+0x4c/0x6c)
[   16.046315] [<8008675c>] (handle_irq_event+0x0/0x6c) from [<80089318>] (handle_level_irq+0xbc/0x11c)
[   16.055447]  r6:def04000 r5:807fd414 r4:807fd3c0 r3:00020000
[   16.061166] [<8008925c>] (handle_level_irq+0x0/0x11c) from [<80085cc8>] (generic_handle_irq+0x38/0x4c)
[   16.070472]  r5:807f7f64 r4:8081e9f8
[   16.074082] [<80085c90>] (generic_handle_irq+0x0/0x4c) from [<8000ef98>] (handle_IRQ+0x5c/0xbc)
[   16.082788] [<8000ef3c>] (handle_IRQ+0x0/0xbc) from [<800085cc>] (tzic_handle_irq+0x6c/0x9c)
[   16.091225]  r8:00000000 r7:def059b0 r6:00000001 r5:00000000 r4:00000000
r3:00000012
[   16.099141] [<80008560>] (tzic_handle_irq+0x0/0x9c) from [<8000e184>] (__irq_svc+0x44/0x60)
[   16.107494] Exception stack(0xdef059b0 to 0xdef059f8)
[   16.112550] 59a0:                                     00000001 00000001 00000000 dfb8e400
[   16.120732] 59c0: 40000013 81a2e500 00000000 81a2e500 00000000 00000000 80862418 def05a0c
[   16.128912] 59e0: def059c8 def059f8 80070e24 804c81bc 20000013 ffffffff
[   16.135542] [<804c8178>] (_raw_spin_unlock_irqrestore+0x0/0x54) from [<8003d0ec>] (__queue_work+0x108/0x470)
[   16.145369]  r5:dfb1a30c r4:81b93c00
[   16.148978] [<8003cfe4>] (__queue_work+0x0/0x470) from [<8003d4e0>] (queue_work_on+0x4c/0x54)
[   16.157511] [<8003d494>] (queue_work_on+0x0/0x54) from [<8003d544>] (queue_work+0x30/0x34)
[   16.165774]  r6:df2e6900 r5:80e0c2f8 r4:dfb1a2c8 r3:def04000
[   16.171495] [<8003d514>] (queue_work+0x0/0x34) from [<80493284>] (rpc_make_runnable+0x9c/0xac)
[   16.180113] [<804931e8>] (rpc_make_runnable+0x0/0xac) from [<80493c88>] (rpc_execute+0x40/0xa8)
[   16.188811]  r5:def05ad4 r4:dfb1a2c8
[   16.192426] [<80493c48>] (rpc_execute+0x0/0xa8) from [<8048c734>] (rpc_run_task+0xa8/0xb4)
[   16.200690]  r8:00000001 r7:df74f520 r6:ded75700 r5:def05ad4 r4:dfb1a2c8
r3:00000002
[   16.208618] [<8048c68c>] (rpc_run_task+0x0/0xb4) from [<801f1608>] (nfs_initiate_read+0xb4/0xd4)
[   16.217403]  r5:df3e86c0 r4:00000000
[   16.221015] [<801f1554>] (nfs_initiate_read+0x0/0xd4) from [<801f1c64>] (nfs_generic_pg_readpages+0x9c/0x114)
[   16.230937] [<801f1bc8>] (nfs_generic_pg_readpages+0x0/0x114) from [<801f0744>] (__nfs_pageio_add_request+0xe8/0x214)
[   16.241545]  r8:000bf000 r7:00000000 r6:00000000 r5:deef4640 r4:def05c1c
r3:801f1bc8
[   16.249463] [<801f065c>] (__nfs_pageio_add_request+0x0/0x214) from [<801f0e3c>] (nfs_pageio_add_request+0x28/0x54)
[   16.259818] [<801f0e14>] (nfs_pageio_add_request+0x0/0x54) from [<801f1394>] (readpage_async_filler+0x114/0x170)
[   16.269992]  r5:def05c58 r4:80fd7300
[   16.273607] [<801f1280>] (readpage_async_filler+0x0/0x170) from [<800bb418>] (read_cache_pages+0xa0/0x108)
[   16.283259]  r8:00200200 r7:00100100 r6:df74f654 r5:def05cd0 r4:80fd7300
[   16.290034] [<800bb378>] (read_cache_pages+0x0/0x108) from [<801f218c>] (nfs_readpages+0xc4/0x168)
[   16.298999] [<801f20c8>] (nfs_readpages+0x0/0x168) from [<800bb1d0>] (__do_page_cache_readahead+0x254/0x354)
[   16.308833] [<800baf7c>] (__do_page_cache_readahead+0x0/0x354) from [<800bb5d0>] (ra_submit+0x38/0x40)
[   16.318145] [<800bb598>] (ra_submit+0x0/0x40) from [<800bb6b0>] (ondemand_readahead+0xd8/0x3b0)
[   16.326851] [<800bb5d8>] (ondemand_readahead+0x0/0x3b0) from [<800bba20>] (page_cache_async_readahead+0x98/0xa8)
[   16.337043] [<800bb988>] (page_cache_async_readahead+0x0/0xa8) from [<800b2118>] (generic_file_aio_read+0x5b4/0x7c4)
[   16.347565]  r6:00000000 r5:df74f654 r4:80fd70a0
[   16.352231] [<800b1b64>] (generic_file_aio_read+0x0/0x7c4) from [<801e82c0>] (nfs_file_read+0x7c/0xcc)
[   16.361544] [<801e8244>] (nfs_file_read+0x0/0xcc) from [<800eab80>] (do_sync_read+0xb4/0xf4)
[   16.369981]  r9:00000000 r8:def05f70 r7:00000000 r6:00000000 r5:dec34900
r4:fffffdee
[   16.377896] [<800eaacc>] (do_sync_read+0x0/0xf4) from [<800eb548>] (vfs_read+0xb4/0x144)
[   16.385987]  r8:00000000 r7:def05f70 r6:76a95008 r5:003e3dd6 r4:dec34900
[   16.392761] [<800eb494>] (vfs_read+0x0/0x144) from [<800eb624>] (sys_read+0x4c/0x78)
[   16.400504]  r8:00000000 r7:00000003 r6:003e3dd6 r5:76a95008 r4:dec34900
[   16.407279] [<800eb5d8>] (sys_read+0x0/0x78) from [<8000e5c0>] (ret_fast_syscall+0x0/0x48)
[   16.415543]  r9:def04000 r8:8000e864 r6:000086b4 r5:00000000 r4:00000000
[   20.872729]  gadget: high-speed config #1: Video
[   20.877368]  gadget: uvc_function_set_alt(0, 0)
[   20.881908]  gadget: uvc_function_set_alt(1, 0)
[   20.891464]  gadget: uvc_function_set_alt(1, 0)
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      4fefe9f6
    • N
      usb: gadget: mv_udc: fix boot up hang · 11c37c8b
      由 Neil Zhang 提交于 
      Fix boot up hang when enable udc without otg enabled.
The root cause is that the clock will be shut down when probe routine is
finished because of clock gating. When a gadget driver is registered at
this time, it will call mv_udc_start which in turn will call
mv_udc_vbus_session. If there is no cable attached at the boot up time,
the vbus is low, so it will call stop_activity path without clock
enabled which will cause system hang then.
Actually, we need't go this path when clock is disabled, what we need to
do is just jump out.
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      11c37c8b
    • Y
      usb: gadget: mv_udc: fix hang when shutdown · 1dcaa252
      由 Yunfan Zhang 提交于 
      Fix system hang in udc shutdown routine which caused by accessing usb
register when clock is disabled. So enable usb clock before access
register.
Signed-off-by: NYunfan Zhang <yfzhang@marvell.com>
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      1dcaa252
    • C
      usb: gadget: mv_udc: add iso support · 60326ce3
      由 Chao Xie 提交于 
      In order to support iso, we need do the following things:
1. fix length for one dtd
2. allow req contains multiple packets for a ISO transfer
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NYu Xu <yuxu@marvell.com>
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      60326ce3
    • N
      usb: gadget: mv_udc: enable stream mode · 583a7263
      由 Neil Zhang 提交于 
      According to ChipIdea's reference manual in section 8.5.2
"Non-streaming operational mode in device mode", we'd better enable stream
mode, especially that ISO endpoints are not supported when the SDIS bit
is set.
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      583a7263
    • N
      usb: gadget: mv_udc: avoid sleeping on spinlock · 0344606b
      由 Neil Zhang 提交于 
      build_dtd() can be called when hold a spinlock, but GFP_KERNEL may cause
dma_pool_alloc() sleep, So we need use GFP_ATOMIC instead of GFP_KERNEL.
But using GFP_ATOMIC may cause failure when allocating memory, add error
handler to handle it.
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      0344606b
    • N
      usb: gadget: mv_udc: remove unused code · a07bc24e
      由 Neil Zhang 提交于 
      Clean unused code for mv_udc driver.
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      a07bc24e
    • N
      usb: gadget: mv_udc: reduce the delay interval · 9b2035a0
      由 Neil Zhang 提交于 
      There are several places use udelay(LOOPS_USEC) to wait the status to be
changed, but the delay interval is a bit too long, so reduce it to
enhance the performance.
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
      9b2035a0
  5. 09 8月, 2012 1 次提交
  7. 01 8月, 2012 1 次提交
    • M
      netvm: propagate page->pfmemalloc from skb_alloc_page to skb · 0614002b
      由 Mel Gorman 提交于 
      The skb->pfmemalloc flag gets set to true iff during the slab allocation
of data in __alloc_skb that the the PFMEMALLOC reserves were used.  If
page splitting is used, it is possible that pages will be allocated from
the PFMEMALLOC reserve without propagating this information to the skb.
This patch propagates page->pfmemalloc from pages allocated for fragments
to the skb.

It works by reintroducing and expanding the skb_alloc_page() API to take
an skb.  If the page was allocated from pfmemalloc reserves, it is
automatically copied.  If the driver allocates the page before the skb, it
should call skb_propagate_pfmemalloc() after the skb is allocated to
ensure the flag is copied properly.

Failure to do so is not critical.  The resulting driver may perform slower
if it is used for swap-over-NBD or swap-over-NFS but it should not result
in failure.

[davem@davemloft.net: API rename and consistency]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0614002b
  9. 31 7月, 2012 5 次提交
  11. 30 7月, 2012 1 次提交
  13. 25 7月, 2012 1 次提交
  15. 20 7月, 2012 4 次提交
  17. 19 7月, 2012 5 次提交
  19. 18 7月, 2012 2 次提交
  21. 17 7月, 2012 1 次提交