Use to_hid_device() instead of container_of().
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

as reported by https://bugzilla.kernel.org/show_bug.cgi?id=108481

This bug reports mentions 6d4f5440 ("HID: multitouch: Fetch feature
reports on demand for Win8 devices") as the origin of the problem but this
commit actually masked 2 firmware bugs that are annihilating each other:

The report descriptor declares two features in reports 3 and 5:

0x05, 0x0d,                    // Usage Page (Digitizers)             318
0x09, 0x0e,                    // Usage (Device Configuration)        320
0xa1, 0x01,                    // Collection (Application)            322
0x85, 0x03,                    //  Report ID (3)                      324
0x09, 0x22,                    //  Usage (Finger)                     326
0xa1, 0x00,                    //  Collection (Physical)              328
0x09, 0x52,                    //   Usage (Inputmode)                 330
0x15, 0x00,                    //   Logical Minimum (0)               332
0x25, 0x0a,                    //   Logical Maximum (10)              334
0x75, 0x08,                    //   Report Size (8)                   336
0x95, 0x02,                    //   Report Count (2)                  338
0xb1, 0x02,                    //   Feature (Data,Var,Abs)            340
0xc0,                          //  End Collection                     342
0x09, 0x22,                    //  Usage (Finger)                     343
0xa1, 0x00,                    //  Collection (Physical)              345
0x85, 0x05,                    //   Report ID (5)                     347
0x09, 0x57,                    //   Usage (Surface Switch)            349
0x09, 0x58,                    //   Usage (Button Switch)             351
0x15, 0x00,                    //   Logical Minimum (0)               353
0x75, 0x01,                    //   Report Size (1)                   355
0x95, 0x02,                    //   Report Count (2)                  357
0x25, 0x03,                    //   Logical Maximum (3)               359
0xb1, 0x02,                    //   Feature (Data,Var,Abs)            361
0x95, 0x0e,                    //   Report Count (14)                 363
0xb1, 0x03,                    //   Feature (Cnst,Var,Abs)            365
0xc0,                          //  End Collection                     367

The report ID 3 presents 2 input mode features, while only the first one
is handled by the device. Given that we did not checked if one was
previously assigned, we were dealing with the ignored featured and we
should never have been able to switch this panel into the multitouch mode.

However, the firmware presents an other bugs which allowed 6d4f5440
to counteract the faulty report descriptor. When we request the values
of the feature 5, the firmware answers "03 03 00". The fields are correct
but the report id is wrong. Before 6d4f5440, we retrieved all the features
and injected them in the system. So when we called report 5, we injected
in the system the report 3 with the values "03 00".
Setting the second input mode to 03 in this report changed it to "03 03"
and the touchpad switched to the mt mode. We could have set anything
in the second field because the actual value (the first 03 in this report)
was given by the query of report ID 5.

To sum up: 2 bugs in the firmware were hiding that we were accessing the
wrong feature.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The usage Confidence is mandary to Windows Precision Touchpad devices. The
appearance of this usage is checked in hidinput_connect but the quirk
MT_QUIRK_VALID_IS_CONFIDENCE is not applied to device accordingly.
Apply this quirk and also remove quirk MT_QUIRK_ALWAYS_VALID to enable palm
rejection for the WIN 8 touchpad devices which have implemented usage
Confidence in its input reports.

Tested on Dell XPS 13 laptop.
Signed-off-by: NAllen Hung <allen_hung@dell.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When configuring input device via input_configured callback we may
encounter errors (for example input_mt_init_slots() may fail). Instead
of continuing with half-initialized input device let's allow driver
indicate failures.
Signed-off-by: NJaikumar Ganesh <jaikumarg@android.com>
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NNikolai Kondrashov <Nikolai.Kondrashov@redhat.com>
Acked-by: NAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some newer Intel Skylake based Dell laptops with Win8 precision touchpad
fail when initial feature reports are fetched from it. Below is an example
output with some additional debug included:

 i2c_hid i2c-DLL0704:01: Fetching the HID descriptor
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=20 00
 i2c_hid i2c-DLL0704:01: HID Descriptor: 1e 00 00 01 99 02 21 00 24 ...
 ...
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 38 02 23 00
 i2c_hid i2c-DLL0704:01: report (len=4): 04 00 08 05
 i2c_hid i2c-DLL0704:01: report id 13
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 3d 02 23 00
 i2c_hid i2c-DLL0704:01: failed to retrieve report from device.
 i2c_hid i2c-DLL0704:01: report id 7
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 37 02 23 00
 i2c_hid i2c-DLL0704:01: report (len=259): 03 01 07 fc 28 fe 84 40 ...
 i2c_hid i2c-DLL0704:01: report id 4
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 34 02 23 00

We manage to fetch few reports but then the touchpad dies:

 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
 i2c_hid i2c-DLL0704:01: failed to retrieve report from device.

it eventually pulls the whole I2C bus low:

 i2c_designware i2c_designware.1: controller timed out
 i2c_hid i2c-DLL0704:01: failed to set a report to device.

Fix this by preventing initial feature report retrieval for Win8 devices.
Instead we fetch reports as needed in mt_feature_mapping(). This prevents
fetching reports which might cause problems with the device in question.
Suggested-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When configuring input device via input_configured callback we may
encounter errors (for example input_mt_init_slots() may fail). Instead
of continuing with half-initialized input device let's allow driver
indicate failures.
Signed-off-by: NJaikumar Ganesh <jaikumarg@android.com>
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NNikolai Kondrashov <Nikolai.Kondrashov@redhat.com>
Acked-by: NAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Instead of printing "UNKNOWN" as device suffix for HID_DG_TOUCHPAD call
the device as "Touchpad".
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NDaniel Martin <consume.noise@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add device IDs for CJTouch 0020 and 0040 panels.
Signed-off-by: NYang Bo <linuxsea@163.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

Fields like HID_DG_CONTACTCOUNT are outside of the physical collection,
but within the application collection and report ID.  Make sure to catch
those fields that are not part of the mt_report_id and return 0 so they
can be processed with the pen.  Otherwise, the wrong HID_DG_CONTACTCOUNT
will be applied to cc_index and result in dereferencing a null pointer in
mt_touch_report.
Signed-off-by: NBrent Adam <brentadam@smarttech.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

According to [1], Windows Precision Touchpad devices must supply
a button type usage in the device capabilities feature report. A
value of 0 indicates that the device contains a depressible
button (i.e. it's a click-pad) whereas a value of 1 indicates
a non-depressible button. Add support for this usage and set
INPUT_PROP_BUTTONPAD on the touchpad input device whenever a
depressible button is present.

[1] https://msdn.microsoft.com/en-us/library/windows/hardware/dn467314(v=vs.85).aspxSigned-off-by: NSeth Forshee <seth.forshee@canonical.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Touchpads that have only one button are called clickpads and should
be advertised as such by the kernel.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: NJason Ekstrand <jason@jlekstrand.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

These 2 are left over from the USB dependency cleaning, so there is
no need to keep them.

[jkosina@suse.cz: fix filename]
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In several hid drivers it is necessary to calculate the length of an
hid_report. This patch exports the existing static function hid_report_len of
hid-core.c as an inline function in hid.h
Signed-off-by: NMathieu Magnaudet <mathieu.magnaudet@enac.fr>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

VTL panels do not switch to the multitouch mode until the input mode
feature is read by the host. This should normally be done by
usbhid, but it looks like an other bug prevents usbhid to properly
retrieve the feature state. As a workaround, we force the reading of
the feature in mt_set_input_mode for such devices.
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NMathieu Magnaudet <mathieu.magnaudet@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

They need to have the class SERIAL.

Note: it is a Win 7 panel, not Win 8 certified.
Signed-off-by: NTomas Sokorai <tsokorai@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Multitouch touchpads built for Win 8.1 need to be sent an input mode feature report
in order to start reporting multitouch events. This is the same process sent
to Win 7 multitouch touchscreens except the value of the feature report is 3 for
touchpads.
Signed-off-by: NAndrew Duggan <aduggan@synaptics.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The ANTON Touch Pad is a device which can switch from a multitouch
touchpad to a mouse. It thus presents several generic collections which
are currently ignored by hid-multitouch. Enable them by not ignoring
them in mt_input_mapping.
Adding also a suffix for them depending on their application.
Reported-by: NEdel Maks <edelmaks@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pens have a special handling in hid-mt as hybrid pen/touch devices
are quite common now. However, some fancy devices presents also
useful collections like mouse or keyboard.
The special case for the pen may not be a special case, and treat it as
a generic case.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The default multitouch protocol class in use since the kernel v3.9 is
working quite well. Since its inclusion, the only devices we had to tweak
were those who really need quirks (GeneralTouch, FocalTech and Wistron,
the 3 of them are Win 7 certified ones).
The flow of new unhandled devices has stopped, which is great and I think
it's time to reduce the list of registered device.

This commit removes only the registration in the kernel of devices that
use the class MT_CLS_DEFAULT, or that can use it. By that, I mean that I
checked all the recordings I have, and the produced input device and
events are the same before and after applying the patch.

This gives two benefits:
- remove a bunch of lines of codes
- prevent bad handling of existing registered devices which are using a
different protocol while using the same VID/PID (I got the case of a
Quanta 3008 recently).

I also removed the associated classes (MT_CLS*). I kept their #define in
case people use the new_id sysfs node with a non standard class (their
should be really few people now, but we never now). This is why there
are /* reserved .... */.

Last, I add a comment on top of mt_devices[] definition to remember people
(and myself) not to include devices for the beauty of it.

To people still trying to add devices with the default class:
"""
Guys, try out your device under a kernel greater or equal to v3.9. If it
works, you are all set. Adding your VID/PID to the kernel only brings us
overload and you won't get anything from it _because_ even a backport of
this shiny patch will _not_ make the device work under 3.0, 3.2, 3.4 or
even 3.8.
So if it works, it works.
If it does not work, then yes, submit a patch or call for help.
In any cases, if you want me to do regression tests, I'd be happy to
get some traces of your device. But I won't patch the kernel if it works.
"""
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is a Win7 device which does not work correctly with the default
settings (not the previous default BT).
However, the quirk ALWAYS_TRUE makes it working like a charm.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

[jkosina@suse.cz: refresh to apply after SIS quirk merging]
Signed-off-by: NEmanuel Krenz <emanuelkrenz@web.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since commit 765e5fbd merged the sis quirk,
then USB_VENDOR_ID_SIS2_TOUCH remains undefined.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds PID VID to support for the Wistron Inc. Optical touch panel.
Signed-off-by: NKaiChung Cheng <kenny_cheng@wistron.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for SiS multitouch panels.
Signed-off-by: NForest Bond <forest.bond@rapidrollout.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

GeneralTouch products should use the quirk SLOT_IS_CONTACTID
instead of SLOT_IS_CONTACTNUMBER.

Adding PIDs 0101,e100,0102,0106,010a from the new products.

Tested on new and older products by GeneralTouch engineers.
Signed-off-by: NLuosong <android@generaltouch.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When working on report indexes, always validate that they are in bounds.
Without this, a HID device could report a malicious feature report that
could trick the driver into a heap overflow:

[  634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500
...
[  676.469629] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

Note that we need to change the indexes from s8 to s16 as they can
be between -1 and 255.

CVE-2013-2897

Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some multitouch screens do not like to be polled for input reports.
However, the Win8 spec says that all touches should be sent during
each report, making the initialization of reports unnecessary.
The Win7 spec is less precise, so do not use this for those devices.

Add the quirk HID_QUIRK_NO_INIT_INPUT_REPORTS so that we do not have to
introduce a quirk for each problematic device. This quirk makes the driver
behave the same way the Win 8 does. It actually retrieves the features,
but not the inputs.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Detecting Win 8 multitouch devices in core allows us to set quirks
before the device is parsed through hid_hw_start().
It also simplifies the detection of those devices in hid-multitouch and
makes the handling of those devices cleaner.

As Win 8 multitouch panels are in the group multitouch and rely on a
special feature to be detected, this patch adds a bitfield in the parser.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

HID special drivers can use safely the devres API.
Use it to remove 25 lines of code and to clean up a little the error paths.

Besides the basic kzalloc -> devm_kzalloc conversions, I changed the
place of the allocation of the new name. Doing this right in
mt_input_configured() removes the kstrdup call which was not very helpful
and the new way is simpler to understand (and to debug).
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

mt_free_input_name() was never called during .remove():
hid_hw_stop() removes the hid_input items in hdev->inputs, and so the
list is therefore empty after the call. In the end, we never free the
special names that has been allocated during .probe().

Restore the original name before freeing it to avoid acessing already
freed pointer.

This fixes a regression introduced by 49a5a827 ("HID: multitouch: append " Pen" to
the name of the stylus input")
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch also removes the duplicate entry in the hid-multitouch.c as
suggested by Benjamin Tissoires.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Just sort the list by IDs. There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add vendor ID for Data Modul and their easyMaxTouch device.
The device has to be configured to multitouch mode prior to using this driver.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit "HID: multitouch: use the callback "report" instead..." breaks the
buttons of touchpads following the HID multitouch specification.
The buttons were emmitted through hid-input, but as now the events
are generated only in hid-multitouch, the buttons are not emmitted anymore.

The input_event() call is far much simpler than the hid-input one as
many of the different tests do not apply to multitouch touchpads.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The "tablet" udev rule relies on BTN_STYLUS to be set.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is not just cosmetics, it can help to write udev and X.org
rules.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Dual sensors devices reports pen and touch on two different reports.
Using the quirk HID_QUIRK_MULTI_INPUT allows us to create a new input
device to forward pen events.

The quirk HID_QUIRK_NO_EMPTY_INPUT avoids the creation of input devices
for the not used mouse emulation present on Win7 certified devices.

Since hid-multitouch sets the quirk HID_QUIRK_NO_INPUT_SYNC, we need
to manually send SYN events for pen report too.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

To implement different methods for pen and touch, the previous
implementation has to be reworked.

This detection of the input attached to the touch sensor is the same
than the one used in mt_report().
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid-multitouch only handles touch events, so there is no point in
mapping other kind of events.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This will allow easier integration of hybrid pen and touch devices.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>