When doing a migrate from ext3 to ext4 inode we need to make sure the test
for inode type and walking inode data happens inside  lock. To make this
happen move truncate_mutex early before checking the i_flags.


This actually should enable us to remove the verify_chain().
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

The unused code found in ext3_find_entry() is also present (and still
unused) in the ext4_find_entry() code. This patch removes it.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_ext_get_blocks returns negative values on error. We should
check for  <= 0
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Before we start committing a transaction, we call
__journal_clean_checkpoint_list() to cleanup transaction's written-back
buffers.

If this call happens to remove all of them (and there were already some
buffers), __journal_remove_checkpoint() will decide to free the transaction
because it isn't (yet) a committing transaction and soon we fail some
assertion - the transaction really isn't ready to be freed :).

We change the check in __journal_remove_checkpoint() to free only a
transaction in T_FINISHED state.  The locking there is subtle though (as
everywhere in JBD ;().  We use j_list_lock to protect the check and a
subsequent call to __journal_drop_transaction() and do the same in the end
of journal_commit_transaction() which is the only place where a transaction
can get to T_FINISHED state.

Probably I'm too paranoid here and such locking is not really necessary -
checkpoint lists are processed only from log_do_checkpoint() where a
transaction must be already committed to be processed or from
__journal_clean_checkpoint_list() where kjournald itself calls it and thus
transaction cannot change state either.  Better be safe if something
changes in future...
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Signed-off-by: NChris Snook <csnook@redhat.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When a new block bitmap is read from disk in read_block_bitmap()
there are a few bits that should ALWAYS be set.  In particular,
the blocks given corresponding to block bitmap, inode bitmap and inode tables.
Validate the block bitmap against these blocks.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Add buffer head related helper function bh_uptodate_or_lock and
bh_submit_read which can be used by file system
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

ext4 file system was by default ignoring errors and continuing. This
is not a good default as continuing on error could lead to file system
corruption. Change the default to mark the file system
readonly. Debian and ubuntu already does this as the default in their
fstab.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>

When mounting an ext4 filesystem with corrupted s_first_data_block, things
can go very wrong and oops.

Because blocks_count in ext4_fill_super is a u64, and we must use do_div,
the calculation of db_count is done differently than on ext4.  If
first_data_block is corrupted such that it is larger than ext4_blocks_count,
for example, then the intermediate blocks_count value may go negative,
but sign-extend to a very large value:

        blocks_count = (ext4_blocks_count(es) -
                        le32_to_cpu(es->s_first_data_block) +
                        EXT4_BLOCKS_PER_GROUP(sb) - 1);

This is then assigned to s_groups_count which is an unsigned long:

        sbi->s_groups_count = blocks_count;

This may result in a value of 0xFFFFFFFF which is then used to compute
db_count:

        db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
                   EXT4_DESC_PER_BLOCK(sb);

and in this case db_count will wind up as 0 because the addition overflows
32 bits.  This in turn causes the kmalloc for group_desc to be of 0 size:

        sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
                                    GFP_KERNEL);

and eventually in ext4_check_descriptors, dereferencing
sbi->s_group_desc[desc_block] will result in a NULL pointer dereference.

The simplest test seems to be to sanity check s_first_data_block,
EXT4_BLOCKS_PER_GROUP, and ext4_blocks_count values to be sure
their combination won't result in a bad intermediate value for
blocks_count.  We could just check for db_count == 0, but
catching it at the root cause seems like it provides more info.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NMingming Cao <cmm@us.ibm.com>

Based on a report by Robert P. J. Day.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

This fix some instances where we were continuing after calling
ext4_error. ext4_error call panic only if errors=panic mount option is
set. So we need to make sure we return correctly after ext4_error call

Reported by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

This patch extends bg_itable_unused of ext4 group descriptor
from 16bit into 32bit. In order to add bg_itable_unused_hi into
struct ext4_group_desc, some extra fields which are already introduced into
e2fsprogs are also added in for consistency.
Signed-off-by: NColy Li <coyli@suse.de>
Cc: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>

The max file size for ext3 file system is now calculated
with hardcoded 4K block size. The patch fixes it to be
calculated with the right block size.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

The max file size for ext2 file system is now calculated
with hardcoded 4K block size. The patch fixes it to be
calculated with the right block size.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Calculate & store the max offset for bitmapped files, and
catch too-large seeks, truncates, and writes in ext4, shortening
or rejecting as appropriate.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>

Export iov_shorten() from kernel so that ext4 can
truncate too-large writes to bitmapped files.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>

use 2 different maxbytes functions for bitmapped & extent-based
files.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>

This patch converts ext4_inode i_blocks to represent total
blocks occupied by the inode in file system block size.
Earlier the variable used to represent this in 512 byte
block size. This actually limited the total size of the file.

The feature is enabled transparently when we write an inode
whose i_blocks cannot be represnted as 512 byte units in a
48 bit variable.

inode flag  EXT4_HUGE_FILE_FL
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Use the __le16 l_i_reserved1 field of the linux2 struct of ext4_inode
to represet the higher 16 bits for i_blocks. With this change max_file
size becomes (2**48 -1 )* 512 bytes.

We add a RO_COMPAT feature to the super block to indicate that inode
have i_blocks represented as a split 48 bits. Super block with this
feature set cannot be mounted read write on a kernel with CONFIG_LSF
disabled.

Super block flag EXT4_FEATURE_RO_COMPAT_HUGE_FILE
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Rename ext4_inode.i_dir_acl to i_size_high
drop ext4_inode_info.i_dir_acl as it is not used
Rename ext4_inode.i_size to ext4_inode.i_size_lo
Add helper function for accessing the ext4_inode combined i_size.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Rename i_file_acl to i_file_acl_lo. This helps
in finding bugs where we use i_file_acl instead
of the combined i_file_acl_lo and i_file_acl_high
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Fix sparse warnings related to static functions
and local variables.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Introduce ext4_update_*_feature and use them instead
of opencoding.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

This patch fixes various places where the group number is set to a negative
value.
Signed-off-by: NAvantika Mathur <mathur@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In many places variables for block group are of type int, which limits the
maximum number of block groups to 2^31.  Each block group can have up to
2^15 blocks, with a 4K block size,  and the max filesystem size is limited to
2^31 * (2^15 * 2^12) = 2^58  -- or 256 PB

This patch introduces a new type ext4_group_t, of type unsigned long, to
represent block group numbers in ext4.
All occurrences of block group variables are converted to type ext4_group_t.
Signed-off-by: NAvantika Mathur <mathur@us.ibm.com>

There are many casts in extents.c which are not needed,
as the variables are already the type of the cast, or
are being promoted for no particular reason in printk's.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>

This patch adds a new data type ext4_lblk_t to represent
the logical file blocks.

This is the preparatory patch to support large files in ext4
The follow up patch with convert the ext4_inode i_blocks to
represent the number of blocks in file system block size. This
changes makes it possible to have a block number 2**32 -1 which
will result in overflow if the block number is represented by
signed long. This patch convert all the block number to type
ext4_lblk_t which is typedef to __u32

Also remove dead code ext4_ext_walk_space
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>

With 64KB blocksize, a directory entry can have size 64KB which does not fit
into 16 bits we have for entry lenght. So we store 0xffff instead and convert
value when read from / written to disk. The patch also converts some places
to use ext4_next_entry() when we are changing them anyway.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>

This patch set supports large block size(>4k, <=64k) in ext4,
just enlarging the block size limit. But it is NOT possible to have 64kB
blocksize on ext4 without some changes to the directory handling
code.  The reason is that an empty 64kB directory block would have a
rec_len == (__u16)2^16 == 0, and this would cause an error to be hit in
the filesystem.  The proposed solution is treat 64k rec_len
with a an impossible value like rec_len = 0xffff to handle this.

The Patch-set consists of the following 2 patches.
  [1/2]  ext4: enlarge blocksize
         - Allow blocksize up to pagesize

  [2/2]  ext4: fix rec_len overflow
         - prevent rec_len from overflow with 64KB blocksize

Now on 64k page ppc64 box runs with this patch set we could create a 64k
block size ext4dev, and able to handle empty directory block.
Signed-off-by: NTakashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] constify function pointer tables
  [WATCHDOG] TXx9 watchdog driver
  [WATCHDOG] misc_register patch	
  [WATCHDOG] wdt: fix locking

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (197 commits)
  sh: add spi header and r2d platform data V3
  sh: update r7780rp interrupt code
  sh: remove consistent alloc stuff from the machine vector
  sh: use declared coherent memory for dreamcast pci ethernet adapter
  sh: declared coherent memory support V2
  sh: Add support for SDK7780 board.
  sh: constify function pointer tables
  sh: Kill off -traditional for linker script.
  cdrom: Add support for Sega Dreamcast GD-ROM.
  sh: Kill off hs7751rvoip reference from arch/sh/Kconfig.
  sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.
  sh: Kill off dead HS771RVoIP board support.
  sh: r7785rp: Fix up DECLARE_INTC_DESC() arg mismatch.
  sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors.
  sh: r2d - enable sm501 usb host function
  sh: remove voyagergx
  sh: r2d - add lcd planel timings to sm501 platform data
  sh: Add OHCI and UDC platform devices for SH7720.
  sh: intc - remove default interrupt priority tables
  sh: Correct pte size mismatch for X2 TLB.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (24 commits)
  HID: ADS/Tech Radio si470x needs blacklist entry
  HID: Logitech Extreme 3D needs NOGET quirk
  HID: Refactor MS Presenter 8K key mapping
  HID: MS Presenter mapping for PID 0x0701
  HID: Support Samsung IR remote
  HID: fix compilation of hidbp drivers without usbhid
  HID: Blacklist the Gretag-Macbeth Huey display colorimeter
  HID: the `bit' in hidinput_mapping_quirks() is an out parameter
  HID: remove redundant WARN_ON()s in order not to scare users
  HID: force hiddev creation for SONY PS3 controller
  HID: Use hid blacklist in usbmouse/usbkbd
  HID: proper handling of MS 4k and 6k devices
  HID: remove unused variable in quirk event handler
  HID: hid-input quirk for BTC 8193
  HID: separate hid-input event quirks from generic code
  HID: refactor mapping to input subsystem for quirky devices
  HID: Microsoft Wireless Optical Desktop 3.0 quirk
  HID: Add support for Logitech Elite keyboards
  HID: add full support for Genius KB-29E
  HID: fix a potential bug in pointer casting
  ...

* 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block:
  block: implement drain buffers
  __bio_clone: don't calculate hw/phys segment counts
  block: allow queue dma_alignment of zero
  blktrace: Add blktrace ioctls to SCSI generic devices

* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits)
  blk_end_request: changing xsysace (take 4)
  blk_end_request: changing ub (take 4)
  blk_end_request: cleanup of request completion (take 4)
  blk_end_request: cleanup 'uptodate' related code (take 4)
  blk_end_request: remove/unexport end_that_request_* (take 4)
  blk_end_request: changing scsi (take 4)
  blk_end_request: add bidi completion interface (take 4)
  blk_end_request: changing ide-cd (take 4)
  blk_end_request: add callback feature (take 4)
  blk_end_request: changing ide normal caller (take 4)
  blk_end_request: changing cpqarray (take 4)
  blk_end_request: changing cciss (take 4)
  blk_end_request: changing ide-scsi (take 4)
  blk_end_request: changing s390 (take 4)
  blk_end_request: changing mmc (take 4)
  blk_end_request: changing i2o_block (take 4)
  blk_end_request: changing viocd (take 4)
  blk_end_request: changing xen-blkfront (take 4)
  blk_end_request: changing viodasd (take 4)
  blk_end_request: changing sx8 (take 4)
  ...

* 'sg' of git://git.kernel.dk/linux-2.6-block:
  SG: work with the SCSI fixed maximum allocations.
  SG: Convert SCSI to use scatterlist helpers for sg chaining
  SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers

* 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: kill some big inlines
  cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions
  kernel: add CLONE_IO to specifically request sharing of IO contexts
  io_context sharing - anticipatory changes
  block: cfq: make the io contect sharing lockless
  io_context sharing - cfq changes
  io context sharing: preliminary support
  ioprio: move io priority from task_struct to io_context

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (176 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

The documentation for ata_data_xfer and ata_data_xfer_noirq had the 'rw'
parameter named 'write_data'.
Signed-off-by: NLinus Nilsson <lajnold@acc.umu.se>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds blacklist entries in hid-quirks.c to let the usbhid driver
ignore the si470x radio devices. They are now handled by the new radio-si470x
driver.
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Logitech Extreme 3D needs NOGET quirk, otherwise it times out at
the time of connect.
Reported-by: NMike Sharov <msharov@softhome.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>