Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 02 6月, 2009 6 次提交
  3. 01 6月, 2009 4 次提交
    • P
      perf_counter: Allow software counters to count while task is not running · 880ca15a
      由 Paul Mackerras 提交于 
      This changes perf_swcounter_match() so that per-task software
counters can count events that occur while their associated
task is not running.  This will allow us to use the generic
software counter code for counting task migrations, which can
occur while the task is not scheduled in.

To do this, we have to distinguish between the situations where
the counter is inactive because its task has been scheduled
out, and those where the counter is inactive because it is part
of a group that was not able to go on the PMU.  In the former
case we want the counter to count, but not in the latter case.
If the context is active, we have the latter case.  If the
context is inactive then we need to know whether the counter
was counting when the context was last active, which we can
determine by comparing its ->tstamp_stopped timestamp with the
context's timestamp.

This also folds three checks in perf_swcounter_match, checking
perf_event_raw(), perf_event_type() and perf_event_id()
individually, into a single 64-bit comparison on
counter->hw_event.config, as an optimization.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34810.259718.955621@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      880ca15a
    • P
      perf_counter: Provide functions for locking and pinning the context for a task · 25346b93
      由 Paul Mackerras 提交于 
      This abstracts out the code for locking the context associated
with a task.  Because the context might get transferred from
one task to another concurrently, we have to check after
locking the context that it is still the right context for the
task and retry if not.  This was open-coded in
find_get_context() and perf_counter_init_task().

This adds a further function for pinning the context for a
task, i.e. marking it so it can't be transferred to another
task.  This adds a 'pin_count' field to struct
perf_counter_context to indicate that a context is pinned,
instead of the previous method of setting the parent_gen count
to all 1s.  Pinning the context with a pin_count is easier to
undo and doesn't require saving the parent_gen value.  This
also adds a perf_unpin_context() to undo the effect of
perf_pin_task_context() and changes perf_counter_init_task to
use it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34748.755674.596386@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      25346b93
    • I
      Merge branch 'linus' into perfcounters/core · 23db9f43
      由 Ingo Molnar 提交于 
      Merge reason: merge almost-rc8 into perfcounters/core, which was -rc6
              based - to pick up the latest upstream fixes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      23db9f43
    • I
      perf_counter tools: Fix unknown command help text · 27b9613b
      由 Ingo Molnar 提交于 
      Arjan reported this error when entering an unknown command to perf:

  $ perf start
  fatal: Uh oh. Your system reports no Git commands at all.

The Git code expects there to be perf-* commands - but since Perf
is a 'pure' utility with no dash commands anymore, this old assumption
of Git does not hold anymore. Remove that error check.
Reported-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      27b9613b
  5. 30 5月, 2009 5 次提交
    • I
      perf_counter tools: Generate per command manpages (and pdf/html, etc.) · c1c2365a
      由 Ingo Molnar 提交于 
      Import Git's nice .txt => {man/html/pdf} generation machinery.

Fix various errors in the Documentation/perf*.txt description as well.

Also fix a bug in builtin-help: we'd map 'perf help top' to 'perftop'
if only the 'perf' binary is in the default PATH - confusing the manpage
logic. I dont fully understand why Git did it this way - but i suppose
it's a migration artifact from their migration from standalone git-xyz
commands to 'git xyz' commands. The perf tools were always using the
modern form so it's not an issue there.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c1c2365a
    • I
      perf_counter tools: Fix 'make install' · 7fbd5544
      由 Ingo Molnar 提交于 
      'make install' didnt install perf itself - which needs a special
rule to be copied to bindir.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7fbd5544
    • I
      perf_counter tools: Print 'CPU utilization factor' in builtin-stat · d7c29318
      由 Ingo Molnar 提交于 
      Before:

 Performance counter stats for '/home/mingo/hackbench':

    5728.862689  task clock ticks     (msecs)
          34426  context switches     #        0.006 M/sec
           3835  CPU migrations       #        0.001 M/sec
          18158  pagefaults           #        0.003 M/sec
    16218109156  CPU cycles           #     2830.947 M/sec
    13519616840  instructions         #     2359.913 M/sec
       55941661  cache references     #        9.765 M/sec
       23554938  cache misses         #        4.112 M/sec

 Wall-clock time elapsed:   528.886980 msecs

After:

 Performance counter stats for '/home/mingo/hackbench':

    5845.443541  task clock ticks     #      11.886 CPU utilization factor
          38289  context switches     #       0.007 M/sec
           4208  CPU migrations       #       0.001 M/sec
          17755  pagefaults           #       0.003 M/sec
    16664668576  CPU cycles           #    2850.882 M/sec
    13468113991  instructions         #    2304.036 M/sec
       57445468  cache references     #       9.827 M/sec
       26896502  cache misses         #       4.601 M/sec

 Wall-clock time elapsed:   491.802357 msecs

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d7c29318
    • A
      perf_counter tools: Add locking to perf top · c44613a4
      由 Arnaldo Carvalho de Melo 提交于 
      perf_counter tools: Add locking to perf top

We need to protect the active_symbols list as two threads change it:
the main thread adding entries to the head and the display thread
decaying entries from any place in the list.

Also related: take a snapshot of syme->count[0] before using it to
calculate the weight and to show the same number used in this calc when
displaying the symbol usage.
Reported-by: NMike Galbraith <efault@gmx.de>
Tested-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090529200307.GR4747@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c44613a4
    • A
      perf_counter tools: Shorten the DSO names using cwd · b78c07d4
      由 Arnaldo Carvalho de Melo 提交于 
      [acme@emilia linux-2.6-tip]$ pwd
/home/acme/git/linux-2.6-tip

Before (still available using -P/--full-paths)

[acme@emilia linux-2.6-tip]$ perf report -P | head -10
    11.48%             perf: 7454 [kernel]: clear_page_c
     4.89%             perf: 7454 [kernel]: vsnprintf
     4.61%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: dso__find_symbol
     4.09%             perf: 7454 [kernel]: number
     4.06%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: dso__fprintf
     4.00%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: symbol_filter

New default:

[acme@emilia linux-2.6-tip]$ perf report | head -10
    11.48%             perf: 7454 [kernel]: clear_page_c
     4.89%             perf: 7454 [kernel]: vsnprintf
     4.61%             perf: 7454 ./Documentation/perf_counter/perf: dso__find_symbol
     4.09%             perf: 7454 [kernel]: number
     4.06%             perf: 7454 ./Documentation/perf_counter/perf: dso__fprintf
     4.00%             perf: 7454 ./Documentation/perf_counter/perf: symbol_filter
Suggested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090529164859.GN4747@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b78c07d4
  7. 29 5月, 2009 25 次提交