- 27 8月, 2013 7 次提交
-
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Lars-Peter Clausen 提交于
Call snd_soc_dapm_new_widgets() before the auto non-connected pins have been marked as not connected will power the system under the assumption that those pins are connected. Once the pins have been marked as disconnected the system there will be an additional power run. This can cause unnecessary power transitions. Calling snd_soc_dapm_new_widgets() only after the pins have been marked as non-connected avoids this. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Each time snd_soc_dapm_new_widgets() is called it will instantiate all the widgets and routes that have been added so far and then power them. Doing this multiple times before the card is fully initialized and all widgets have been added can cause unnecessary and even invalid power state transitions which can result in extra register writes and and also might cause clicks and pops. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
snd_soc_jack_add_pins() does not create any new DAPM widgets, so there is no need to call snd_soc_dapm_new_widgets(). Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Let the core take care of instantiating the controls and DAPM widgets and routes, this makes the code a bit shorter. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Let the core take care of instantiating the DAPM widgets and routes, this makes the code a bit shorter. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 26 8月, 2013 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging fixes from Greg KH: "Here are two tiny staging tree fixes (well, one is for an iio driver, but those updates come through the staging tree due to dependancies) One fixes a problem with an IIO driver, and the other fixes a bug in the comedi driver core" * tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: bug-fix NULL pointer dereference on failed attach iio: adjd_s311: Fix non-scan mode data read
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are two USB fixes for 3.11-rc7 One fixes a reported regression in the OHCI driver, and the other fixes a reported build breakage in the USB phy drivers" * tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: phy: fix build breakage USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "This round of fixes is smaller than previous: a couple more updates for the security fixes, and a one-liner kexec fix" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "Assorted fixes from the last week or so" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: collect_mounts() should return an ERR_PTR bfs: iget_locked() doesn't return an ERR_PTR efs: iget_locked() doesn't return an ERR_PTR() proc: kill the extra proc_readfd_common()->dir_emit_dots() cope with potentially long ->d_dname() output for shmem/hugetlb
-
- 25 8月, 2013 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fix from Rafael Wysocki: "I really hoped that it wouldn't be necessary to change anything in ACPI at this point, but it turns out that we need to revert one more ACPI video commit causing trouble. This reverts a change in the ACPI video driver that caused the ACPI backlight initialization to be carried out even if acpi_backlight=vendor is passed in the kernel command line which turns out to break things at least on one system" * tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of small bug fixes for lpfc and zfcp and a fix for a fairly nasty bug in sg where a process which cancels I/O completes in a kernel thread which would then try to write back to the now gone userspace and end up writing to a random kernel address instead" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] zfcp: remove access control tables interface (keep sysfs files) [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops [SCSI] zfcp: fix lock imbalance by reworking request queue locking [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal [SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on
-
由 Joern Rennecke 提交于
For a search buffer, 2 byte aligned, strchr() was returning pointer outside of buffer (buf - 1) ------------->8---------------- // Input buffer (default 4 byte aigned) char *buffer = "1AA_"; // actual search start (to mimick 2 byte alignment) char *current_line = &(buffer[2]); // Character to search for char c = 'A'; char *c_pos = strchr(current_line, c); printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_' ------------->8---------------- Reported-by: NAnton Kolesov <Anton.Kolesov@synopsys.com> Debugged-by: NAnton Kolesov <Anton.Kolesov@synopsys.com> Cc: <stable@vger.kernel.org> # [3.9 and 3.10] Cc: Noam Camus <noamc@ezchip.com> Signed-off-by: NJoern Rennecke <joern.rennecke@embecosm.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
This should actually be returning an ERR_PTR on error instead of NULL. That was how it was designed and all the callers expect it. [AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts() return errors" missed - originally collect_mounts() was expected to return NULL on failure] Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
iget_locked() returns a NULL on error, it doesn't return an ERR_PTR. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
The iget_locked() function returns NULL on error and never an ERR_PTR. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Oleg Nesterov 提交于
proc_readfd_common() does dir_emit_dots() twice in a row, we need to do this only once. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
dynamic_dname() is both too much and too little for those - the output may be well in excess of 64 bytes dynamic_dname() assumes to be enough (thanks to ashmem feeding really long names to shmem_file_setup()) and vsnprintf() is an overkill for those guys. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 8月, 2013 14 次提交
-
-
由 Fabio Estevam 提交于
Add .owner field and also MODULE_ALIAS(), so that auto module loading can work. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "This contains three commits all of which are updates for specific devices which aren't too widespread. Pretty limited scope and nothing too interesting or dangerous" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_fsl: save irqs while coalescing libata: apply behavioral quirks to sil3826 PMP sata, highbank: fix ordering of SGPIO signals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fix from Tejun Heo: "A late fix for cgroup. This fixes a behavior regression visible to userland which was created by a commit merged during -rc1. While the behavior change isn't too likely to be noticeable, the fix is relatively low risk and we'll need to backport it through -stable anyway if the bug gets released" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix a regression in validating config change
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Ben was on holidays for a week so a few nouveau regression fixes backed up, but they all seem necessary. Otherwise one i915 and one gma500 fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gma500: Fix SDVO turning off randomly drm/nv04/disp: fix framebuffer pin refcounting drm/nouveau/mc: fix race condition between constructor and request_irq() drm/nouveau: fix reclocking on nv40 drm/nouveau/ltcg: fix allocating memory as free drm/nouveau/ltcg: fix ltcg memory initialization after suspend drm/nouveau/fb: fix null derefs in nv49 and nv4e init drm/i915: Invalidate TLBs for the rings after a reset
-
由 Anatolij Gustschin 提交于
Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c) renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h but changed drivers/usb/phy/phy-fsm-usb.c to include not existing "phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building: ... drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1 This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting in another build breakage: ... In file included from drivers/usb/phy/phy-fsl-usb.c:46:0: drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1 Fix both issues. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: stable <stable@vger.kernel.org> # 3.10+ Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
Commit c1117afb (USB: OHCI: make ohci-pci a separate driver) neglected to preserve the entries for the pci_suspend and pci_resume driver callbacks. As a result, OHCI controllers don't work properly during suspend and after hibernation. This patch adds the missing callbacks to the driver. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: NSteve Cotton <steve@s.cotton.clara.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ian Abbott 提交于
Commit dcd7b8bd ("staging: comedi: put module _after_ detach" by myself) reversed a couple of calls in `comedi_device_attach()` when recovering from an error returned by the low-level driver's 'attach' handler. Unfortunately, that introduced a NULL pointer dereference bug as `dev->driver` is NULL after the call to `comedi_device_detach()`. We still have a pointer to the low-level comedi driver structure in the `driv` variable, so use that instead. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Merge networking fixes from David Miller: 1) Revert Johannes Berg's genetlink locking fix, because it causes regressions. Johannes and Pravin Shelar are working on fixing things properly. 2) Do not drop ipv6 ICMP messages without a redirected header option, they are legal. From Duan Jiong. 3) Missing error return propagation in probing of via-ircc driver. From Alexey Khoroshilov. 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when initializing, from Peter Wu. 5) realtek phy driver programs wrong interrupt status bit, from Giuseppe CAVALLARO. 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn. 7) Bridge code uses wrong bitmap length, from Toshiaki Makita. 8) SFC driver uses wrong indexes to look up MAC filters, from Ben Hutchings. 9) Don't pass stack buffers into usb control operations in hso driver, from Daniel Gimpelevich. 10) Multiple ipv6 fragmentation headers in one packet is illegal and such packets should be dropped, from Hannes Frederic Sowa. 11) When TCP sockets are "repaired" as part of checkpoint/restart, the timestamp field of SKBs need to be refreshed otherwise RTOs can be wildly off. From Andrey Vagin. 12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in hostp driver. From Dan Carpenter. 13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes it does. From Dan Carpenter. 14) Fix regression in wireless SME disconnects, from Johannes Berg. 15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from Jussi Kivilinna. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "genetlink: fix family dump race" hso: Fix stack corruption on some architectures hso: Earlier catch of error condition sfc: Fix lookup of default RX MAC filters when steered using ethtool bridge: Use the correct bit length for bitmap functions in the VLAN code packet: restore packet statistics tp_packets to include drops net: phy: rtl8211: fix interrupt on status link change r8169: remember WOL preferences on driver load via-ircc: don't return zero if via_ircc_open() failed macvtap: Ignore tap features when VNET_HDR is off macvtap: Correctly set tap features when IFF_VNET_HDR is disabled. macvtap: simplify usage of tap_features tcp: set timestamps for restored skb-s bnx2x: set VF DMAE when first function has 0 supported VFs bnx2x: Protect against VFs' ndos when SR-IOV is disabled bnx2x: prevent VF benign attentions bnx2x: Consider DCBX remote error ...
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier
-
由 Richard Laager 提交于
The LZ4 code is listed as using the "BSD 2-Clause License". Signed-off-by: NRichard Laager <rlaager@wiktel.com> Acked-by: NKyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ The 2-clause BSD can be just converted into GPL, but that's rude and pointless, so don't do it - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
The swapaccount kernel parameter without any values has been removed by commit a2c8990a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NGergely Risko <gergely@risko.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Drake 提交于
Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac250415 ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by: NDaniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 8月, 2013 6 次提交
-
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just one patch that soaked for quite a bit to fix a resume issue, resulting in gpu hangs (or worse) due to tlb containing garbage. * tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Invalidate TLBs for the rings after a reset
-
由 stephen hemminger 提交于
IP sends device configuration (see inet_fill_link_af) as an array in the netlink information, but the indices in that array are not exposed to userspace through any current santized header file. It was available back in 2.6.32 (in /usr/include/linux/sysctl.h) but was broken by: commit 02291680 Author: Eric W. Biederman <ebiederm@xmission.com> Date: Sun Feb 14 03:25:51 2010 +0000 net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers Eric was solving the sysctl problem but then the indices were re-exposed by a later addition of devconf support for IPV4 commit 9f0f7272 Author: Thomas Graf <tgraf@infradead.org> Date: Tue Nov 16 04:32:48 2010 +0000 ipv4: AF_INET link address family Putting them in /usr/include/linux/ip.h seemed the logical match for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Duan Jiong 提交于
rfc 4861 says the Redirected Header option is optional, so the kernel should not drop the Redirect Message that has no Redirected Header option. In this patch, the function ip6_redirect_no_header() is introduced to deal with that condition. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
-
由 Sathya Perla 提交于
commit fba87559 ("disable TX in be_close()") disabled TX in be_close() to protect be_xmit() from touching freed up queues in the AER recovery flow. But, TX must be disabled *before* cleaning up TX completions in the close() path, not after. This allows be_tx_compl_clean() to free up all TX-req skbs that were notified to the HW. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
Revert commit c04c697c (ACPI / video: Always call acpi_video_init_brightness() on init), because it breaks eDP backlight at 1920x1080 on Acer Aspire S3 for Trevor Bortins. References: https://bugs.freedesktop.org/show_bug.cgi?id=68355Reported-and-bisected-by: NTrevor Bortins <enabfluw@gmail.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc由 David S. Miller 提交于
Merge in a fix for RX MAC address filter programming bug in the sfc driver. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-