Provide hooks into the kernel entry and exit paths to permit control
of userspace visibility to the kernel.  The intended use is:

- on entry to kernel from user, uaccess_disable will be called to
  disable userspace visibility
- on exit from kernel to user, uaccess_enable will be called to
  enable userspace visibility
- on entry from a kernel exception, uaccess_save_and_disable will be
  called to save the current userspace visibility setting, and disable
  access
- on exit from a kernel exception, uaccess_restore will be called to
  restore the userspace visibility as it was before the exception
  occurred.

These hooks allows us to keep userspace visibility disabled for the
vast majority of the kernel, except for localised regions where we
want to explicitly access userspace.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Improve the do_ldrd_abort macro code - firstly, it inefficiently checks
for the LDRD encoding by doing a multi-stage test of various bits.  This
can be simplified by generating a mask, bitmasking the instruction and
then comparing the result.

Secondly, we want to be able to test the result rather than branching
to do_DataAbort, so remove the branch at the end and rename the macro
to 'teq_ldrd' to reflect it's new usage.  teq_ldrd macro returns 'eq'
if the instruction was a LDRD.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Keep the machine vectors in its own domain to avoid software based
user access control from making the vector code inaccessible, and
thereby deadlocking the machine.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We must invalidate the L1 cache before enabling coherency, otherwise
secondary CPUs can inject invalid cache lines into the coherent CPU
cluster, which could then be migrated to other CPUs.  This fixes a
recent regression with SoCFPGA randomly failing to boot.

Fixes: 02b4e275 ("ARM: v7 setup function should invalidate L1 cache")
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

nr_bitmaps member of mapping structure stores the number of already
allocated bitmaps and it is interpreted as loop iterator (it starts from
0 not from 1), so a comparison against number of possible bitmap
extensions should include this fact. This patch fixes this by changing
the extension failure condition. This issue has been introduced by
commit 4d852ef8 ("arm: dma-mapping: Add
support to extend DMA IOMMU mappings").
Reported-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NHyungwon Hwang <human.hwang@samsung.com>
Cc: stable@vger.kernel.org  # v3.15+
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert the ioremap*() preprocessor macros to real functions, moving
them out of line.  This allows us to kill off __arm_ioremap(), and
__arm_iounmap() helpers, and remove __arm_ioremap_pfn_caller() from
global view.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a nmessage to suggest that HIGHMEM is enabled when physical memory
is truncated due to lack of virtual address space to map it in the low
memory mapping.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The memblock limit is currently used in find_limits
to find the bounds for ZONE_NORMAL. The memblock
limit may need to be rounded down a PMD size to ensure
allocations are fully mapped though. This has the side
effect of reducing the amount of memory in ZONE_NORMAL.
Once all lowmem is mapped, it's safe to change the memblock
limit back to include the unaligned section. Adjust the
memblock limit after lowmem mapping is complete.

Before:
 # cat /proc/zoneinfo | grep managed
        managed  62907
        managed  424

After:
 # cat /proc/zoneinfo | grep managed
        managed  63331
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Currently we have many duplicates in definitions of huge_pmd_unshare.  In
all architectures this function just returns 0 when
CONFIG_ARCH_WANT_HUGE_PMD_SHARE is N.

This patch puts the default implementation in mm/hugetlb.c and lets these
architectures use the common code.
Signed-off-by: NZhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Yang <James.Yang@freescale.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These options make it possible to overwrites the data and instruction
prefetching behavior of the arm pl310 cache controller.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When dma-coherent transfers are enabled, the mmap call must
not change the pg_prot flags in the vma struct.

Split the arm_dma_mmap into a common and specific parts,
and add a "arm_coherent_dma_mmap" implementation that does
not alter the page protection flags.

Tested on a topic-miami board (Zynq) using the ACP port
to transfer data between FPGA and CPU using the Dyplo
framework. Without this patch, byte-wise access to mmapped
coherent DMA memory was about 20x slower because of the
memory being marked as non-cacheable, and transfer speeds
would not exceed 240MB/s.

After this patch, the mapped memory is cacheable and the
transfer speed is again 600MB/s (limited by the FPGA) when
the data is in the L2 cache, while data integrity is being
maintained.

The patch has no effect on non-coherent DMA.
Signed-off-by: NMike Looijmans <mike.looijmans@topic.nl>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This splits off the reservation of the memory occupied by the FDT
binary itself from the processing of the memory reservations it
contains. This is necessary because the physical address of the FDT,
which is needed to perform the reservation, may not be known to the
FDT driver core, i.e., it may be mapped outside the linear direct
mapping, in which case __pa() returns a bogus value.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Vybrids has 112 peripheral interrupts which can be routed to the
Cortex-M4's NVIC interrupt controller.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Document that r13 is not a stack in the initialisation function, in
case anyone gets other ideas.

Document the registers available for the errata workarounds, and
specifically which registers contain parts of the MIDR register, as
well as which registers must be preserved.

Lastly, use the lowest numbered available register (r0) rather than
r10 for temporary storage.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We already have the main ID register available in r9, there's no need
to refetch it.  Use the saved value.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than having a long sprawling __v7_setup function, which is hard
to maintain properly, move the CPU errata out of line.

While doing this, it was discovered that the Cortex-A15 errata had been
incorrectly added:

	ldr	r10, =0x00000c08	@ Cortex-A8 primary part number
	teq	r0, r10
	bne	2f
/* Cortex-A8 errata */
	b	3f
2:	ldr	r10, =0x00000c09	@ Cortex-A9 primary part number
	teq	r0, r10
	bne	3f
/* Cortex-A9 errata */
3:	ldr	r10, =0x00000c0f	@ Cortex-A15 primary part number
	teq	r0, r10
	bne	4f
/* Cortex-A15 errata */
4:

This results in the Cortex-A15 test always being executed after the
Cortex-A8 and Cortex-A9 errata, which is obviously not what is intended.
The 'b 3f' labels should have been updated to 'b 4f'.  The new structure
of:

	/* Cortex-A8 Errata */
	ldr	r10, =0x00000c08	@ Cortex-A8 primary part number
	teq	r0, r10
	beq	__ca8_errata

	/* Cortex-A9 Errata */
	ldr	r10, =0x00000c09	@ Cortex-A9 primary part number
	teq	r0, r10
	beq	__ca9_errata

	/* Cortex-A15 Errata */
	ldr	r10, =0x00000c0f	@ Cortex-A15 primary part number
	teq	r0, r10
	beq	__ca15_errata

__errata_finish:

is much cleaner and easier to see that this kind of thing doesn't
happen.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Re-engineer the LPAE TTBR setup code.  Rather than passing some shifted
address in order to fit in a CPU register, pass either a full physical
address (in the case of r4, r5 for TTBR0) or a PFN (for TTBR1).

This removes the ARCH_PGD_SHIFT hack, and the last dangerous user of
cpu_set_ttbr() in the secondary CPU startup code path (which was there
to re-set TTBR1 to the appropriate high physical address space on
Keystone2.)
Tested-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Eliminate the needless nommu version of this function, and get rid of
the proc_info_list structure argument - we no longer need this in order
to fix up the page table entries.
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Tested-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Re-implement the physical address space switching to be architecturally
compliant.  This involves flushing the caches, disabling the MMU, and
only then updating the page tables.  Once that is complete, the system
can be brought back up again.

Since we disable the MMU, we need to do the update in assembly code.
Luckily, the entries which need updating are fairly trivial, and are
all setup by the early assembly code.  We can merely adjust each entry
by the delta required.

Not only does this fix the code to be architecturally compliant, but it
fixes a couple of bugs too:

1. The original code would only ever update the first L2 entry covering
   a fraction of the kernel; the remainder were left untouched.
2. The L2 entries covering the DTB blob were likewise untouched.

This solution fixes up all entries.
Tested-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The init_meminfo() method is not about initialising meminfo - it's about
fixing up the physical to virtual translation so that we use a different
physical address space, possibly above the 4GB physical address space.
Therefore, the name "init_meminfo()" is confusing.

Rename it to pv_fixup() instead.
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Tested-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There is no point platform code doing this, let's move it into the
generic code so it doesn't get duplicated.
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Tested-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make the init_meminfo function return the offset to be applied to the
phys-to-virt translation constants.  This allows us to move the update
into generic code, along with the requirements for this update.

This avoids platforms having to know the details of the phys-to-virt
translation support.
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Tested-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

All ARMv5 and older CPUs invalidate their caches in the early assembly
setup function, prior to enabling the MMU.  This is because the L1
cache should not contain any data relevant to the execution of the
kernel at this point; all data should have been flushed out to memory.

This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed,
these typically do not search their caches when caching is disabled (as
it needs to be when the MMU is disabled) so this change should be safe.

ARMv7 allows there to be CPUs which search their caches while caching is
disabled, and it's permitted that the cache is uninitialised at boot;
for these, the architecture reference manual requires that an
implementation specific code sequence is used immediately after reset
to ensure that the cache is placed into a sane state.  Such
functionality is definitely outside the remit of the Linux kernel, and
must be done by the SoC's firmware before _any_ CPU gets to the Linux
kernel.

Changing the data cache clean+invalidate to a mere invalidate allows us
to get rid of a lot of platform specific hacks around this issue for
their secondary CPU bringup paths - some of which were buggy.
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Tested-by: NThierry Reding <treding@nvidia.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: NMichal Simek <michal.simek@xilinx.com>
Tested-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The feroceon copypage implementation cannot be built when targetting an
ARMv4 CPU, so we need to pass the march=armv5te flag manually to gcc
when building this file. This is obviously safe since that code will
not be executed on ARMv4.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Atmel at91x40 is gone, so we no longer have any platform using
either of these two, and we get randconfig failures on NOMMU
kernels if they accidentally get enabled on something that conflicts
with ARMv4T.

This stops short of removing the entire CPU support for now,
but as nothing selects these, it is basically dead code.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Introduce faulthandler_disabled() and use it to check for irq context and
disabled pagefaults (via pagefault_disable()) in the pagefault handlers.

Please note that we keep the in_atomic() checks in place - to detect
whether in irq context (in which case preemption is always properly
disabled).

In contrast, preempt_disable() should never be used to disable pagefaults.
With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt
counter, and therefore the result of in_atomic() differs.
We validate that condition by using might_fault() checks when calling
might_sleep().

Therefore, add a comment to faulthandler_disabled(), describing why this
is needed.

faulthandler_disabled() and pagefault_disable() are defined in
linux/uaccess.h, so let's properly add that include to all relevant files.

This patch is based on a patch from Thomas Gleixner.
Reviewed-and-tested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The existing code relies on pagefault_disable() implicitly disabling
preemption, so that no schedule will happen between kmap_atomic() and
kunmap_atomic().

Let's make this explicit, to prepare for pagefault_disable() not
touching preemption anymore.
Reviewed-and-tested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-5-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Avoid passing the auxiliary control register value through the enable
method.  In the resume path, we have to read the value stored in
l2x0_saved_regs.aux_ctrl, only to have it immediately written back by
l2c_enable().  We can avoid this if we have __l2c_init() save the value
directly to l2x0_saved_regs.aux_ctrl before calling the specific enable
method.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Some L2C caches have a bit which allows non-secure software to control
the cache lockdown.  Some platforms are unable to set this bit.  To
avoid receiving an abort while trying to unlock the cache lines, check
the state of this bit before unlocking.  We do this by providing a new
method in the l2c_init_data to perform the unlocking.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

l2c_configure() does not follow the pattern of other l2c_* functions.
Fix this so that it does to avoid future confusion.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Before calling the controller specific configuration function, write
the auxiliary control register first, so that bits shared with other
registers (such as the prefetch control register) are not overwritten
by the later write to the auxctrl register.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

l2c_enable() is documented that it must not be called if the cache has
already been enabled.  Unfortunately, commit 6b49241a ("ARM: 8259/1:
l2c: Refactor the driver to use commit-like interface") changed this
without updating the comment, for very little reason.  Revert this
change and restore the expected behaviour.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

At boot time we round the memblock limit down to section size in an
attempt to ensure that we will have mapped this RAM with section
mappings prior to allocating from it. When mapping RAM we iterate over
PMD-sized chunks, creating these section mappings.

Section mappings are only created when the end of a chunk is aligned to
section size. Unfortunately, with classic page tables (where PMD_SIZE is
2 * SECTION_SIZE) this means that if a chunk is between 1M and 2M in
size the first 1M will not be mapped despite having been accounted for
in the memblock limit. This has been observed to result in page tables
being allocated from unmapped memory, causing boot-time hangs.

This patch modifies the memblock limit rounding to always round down to
PMD_SIZE instead of SECTION_SIZE. For classic MMU this means that we
will round the memblock limit down to a 2M boundary, matching the limits
on section mappings, and preventing allocations from unmapped memory.
For LPAE there should be no change as PMD_SIZE == SECTION_SIZE.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reported-by: NStefan Agner <stefan@agner.ch>
Tested-by: NStefan Agner <stefan@agner.ch>
Acked-by: NLaura Abbott <labbott@redhat.com>
Tested-by: NHans de Goede <hdegoede@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

BSYM() was invented to allow us to work around a problem with the
assembler, where local symbols resolved by the assembler for the 'adr'
instruction did not take account of their ISA.

Since we don't want BSYM() used elsewhere, replace BSYM() with a new
macro 'badr', which is like the 'adr' pseudo-op, but with the BSYM()
mechanics integrated into it.  This ensures that the BSYM()-ification
is only used in conjunction with 'adr'.
Acked-by: NDave Martin <Dave.Martin@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Looks like apps can be made to segfault easily on armhf distros
just by running cpuburn-a8 in the background, then starting apt
get update unless erratum 430973 workaround is enabled. This happens
on r3p2 also, which has 430973 fixed in hardware.

Turns out the reason for this is some bootloaders incorrectly
setting the auxilary register IBE bit, which probably causes us
to hit erratum 687067 on Cortex-A8 later than r1p2.

If the bootloader incorrectly sets the IBE bit in the auxilary control
register for Cortex-A8 revisions with 430973 fixed in hardware, we
need to call flush BTAC/BTB to avoid segfaults probably caused by
erratum 687067. So let's flush BTAC/BTB unconditionally for Cortex-A8.
It won't do anything unless the IBE bit is set.

Note that we keep the erratum 430973 Kconfig option still around and
disabled for multiarch as it may be unsafe to enable for some secure
SoC. It is known safe to be enabled for n900, but won't do anything
on n900 as the IBE bit needs to be set with SMC.

Also note that SoCs probably should also add checks and print warnings
for the misconfigured IBE bit depending on the Cortex-A8 revision
so the bootloaders can be fixed Cortex-A8 revisions later than
r1p2 to not set the IBE bit.
Tested-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

From Cortex-M reference manuals, the nvic supports up to 240 interrupts.
So the number of entries in vectors table is up to 256.

This patch adds a new config flag to specify the number of external interrupts.
Some ifdeferies are added in order to respect the natural alignment without
wasting too much space on smaller systems.
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NStefan Agner <stefan@agner.ch>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

bf35706f ("ARM: 8314/1: replace PROCINFO embedded branch with
relative offset") broke booting for Kirkwood. The kernel would say:

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Error: unrecognized/unsupported processor variant (0x56251311).

Fix it by removing the extraneous .long __feroceon_setup from the
feroceon_proc_info macro.

Fixes: bf35706f ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset")
Reported-by: NFlorian Fainelli <f.fainelli@gmail.com>
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The block could never be compiled;  CPU_ICACHE_STREAMING_DISABLE has not
been defined in Kconfig since the very first Git commit.  Hence, we can
safely remove the entire block.
Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

CPU_ARM1020_CPU_IDLE is not defined in Kconfig.  The last reference on
LKML dates back to 2001, so we can safely remove the comments to make
static analysis tools happy.
Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch 22b3c181 ("arm: dma-mapping: limit
IOMMU mapping size") added a check for IO address space size. However
this patch broke IOMMU initialization for typical platforms initialized
from device tree, which get the default IO address space size of 4GiB.
This value doesn't fit into size_t and fails a check introduced by that
commit resulting in failed dma-mapping/iommu initialization. This patch
fixes this issue by adding proper support for full 4GiB address space
size.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>