This patch adds mount ro and remount support. The main
changes in patch are: adding btrfs_remount and related
helper function; splitting the transaction related code
out of close_ctree into btrfs_commit_super; updating
allocator to properly handle read only block group.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This fixes latency problems on metadata reads by making sure they
don't go through the async submit queue, and by tuning down the amount
of readahead done during btree searches.

Also, the btrfs bdi congestion function is tuned to ignore the
number of pending async bios and checksums pending.  There is additional
code that throttles new async bios now and the congestion function
doesn't need to worry about it anymore.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When btrfs unplugs, it tries to find the correct device to unplug
via search through the extent_map tree.  This avoids unplugging
a device that doesn't need it, but is a waste of time for filesystems
with a small number of devices.

This patch checks the total number of devices before doing the
search.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When reading compressed extents, try to put pages into the page cache
for any pages covered by the compressed extent that readpages didn't already
preload.

Add an async work queue to handle transformations at delayed allocation processing
time.  Right now this is just compression.  The workflow is:

1) Find offsets in the file marked for delayed allocation
2) Lock the pages
3) Lock the state bits
4) Call the async delalloc code

The async delalloc code clears the state lock bits and delalloc bits.  It is
important this happens before the range goes into the work queue because
otherwise it might deadlock with other work queue items that try to lock
those extent bits.

The file pages are compressed, and if the compression doesn't work the
pages are written back directly.

An ordered work queue is used to make sure the inodes are written in the same
order that pdflush or writepages sent them down.

This changes extent_write_cache_pages to let the writepage function
update the wbc nr_written count.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs uses kernel threads to create async work queues for cpu intensive
operations such as checksumming and decompression.  These work well,
but they make it difficult to keep IO order intact.

A single writepages call from pdflush or fsync will turn into a number
of bios, and each bio is checksummed in parallel.  Once the checksum is
computed, the bio is sent down to the disk, and since we don't control
the order in which the parallel operations happen, they might go down to
the disk in almost any order.

The code deals with this somewhat by having deep work queues for a single
kernel thread, making it very likely that a single thread will process all
the bios for a single inode.

This patch introduces an explicitly ordered work queue.  As work structs
are placed into the queue they are put onto the tail of a list.  They have
three callbacks:

->func (cpu intensive processing here)
->ordered_func (order sensitive processing here)
->ordered_free (free the work struct, all processing is done)

The work struct has three callbacks.  The func callback does the cpu intensive
work, and when it completes the work struct is marked as done.

Every time a work struct completes, the list is checked to see if the head
is marked as done.  If so the ordered_func callback is used to do the
order sensitive processing and the ordered_free callback is used to do
any cleanup.  Then we loop back and check the head of the list again.

This patch also changes the checksumming code to use the ordered workqueues.
One a 4 drive array, it increases streaming writes from 280MB/s to 350MB/s.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch adds transaction IDs to root tree pointers.
Transaction IDs in tree pointers are compared with the
generation numbers in block headers when reading root
blocks of trees. This can detect some types of IO errors.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch removes the giant fs_info->alloc_mutex and replaces it with a bunch
of little locks.

There is now a pinned_mutex, which is used when messing with the pinned_extents
extent io tree, and the extent_ins_mutex which is used with the pending_del and
extent_ins extent io trees.

The locking for the extent tree stuff was inspired by a patch that Yan Zheng
wrote to fix a race condition, I cleaned it up some and changed the locking
around a little bit, but the idea remains the same.  Basically instead of
holding the extent_ins_mutex throughout the processing of an extent on the
extent_ins or pending_del trees, we just hold it while we're searching and when
we clear the bits on those trees, and lock the extent for the duration of the
operations on the extent.

Also to keep from getting hung up waiting to lock an extent, I've added a
try_lock_extent so if we cannot lock the extent, move on to the next one in the
tree and we'll come back to that one.  I have tested this heavily and it does
not appear to break anything.  This has to be applied on top of my
find_free_extent redo patch.

I tested this patch on top of Yan's space reblancing code and it worked fine.
The only thing that has changed since the last version is I pulled out all my
debugging stuff, apparently I forgot to run guilt refresh before I sent the
last patch out.  Thank you,
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

This patch improves the space balancing code to keep more sharing
of tree blocks. The only case that breaks sharing of tree blocks is
data extents get fragmented during balancing. The main changes in
this patch are:

Add a 'drop sub-tree' function. This solves the problem in old code
that BTRFS_HEADER_FLAG_WRITTEN check breaks sharing of tree block.

Remove relocation mapping tree. Relocation mappings are stored in
struct btrfs_ref_path and updated dynamically during walking up/down
the reference path. This reduces CPU usage and simplifies code.

This patch also fixes a bug. Root items for reloc trees should be
updated in btrfs_free_reloc_root.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This is a large change for adding compression on reading and writing,
both for inline and regular extents.  It does some fairly large
surgery to the writeback paths.

Compression is off by default and enabled by mount -o compress.  Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.

If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.

* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler.  This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.

* Inline extents are inserted at delalloc time now.  This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.

* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.

From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field.  Neither the encryption or the
'other' field are currently used.

In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k.  This is a
software only limit, the disk format supports u64 sized compressed extents.

In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k.  This is a software only limit
and will be subject to tuning later.

Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data.  This way additional encodings can be
layered on without having to figure out which encoding to checksum.

Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread.  This makes it tricky to
spread the compression load across all the cpus on the box.  We'll have to
look at parallel pdflush walks of dirty inodes at a later time.

Decompression is hooked into readpages and it does spread across CPUs nicely.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This improves the comments at the top of many functions.  It didn't
dive into the guts of functions because I was trying to
avoid merging problems with the new allocator and back reference work.

extent-tree.c and volumes.c were both skipped, and there is definitely
more work todo in cleaning and commenting the code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs-vol -a /dev/xxx will zero the first and last two MB of the device.
The kernel code needs to wait for this IO to finish before it adds
the device.

btrfs metadata IO does not happen through the block device inode.  A
separate address space is used, allowing the zero filled buffer heads in
the block device inode to be written to disk after FS metadata starts
going down to the disk via the btrfs metadata inode.

The end result is zero filled metadata blocks after adding new devices
into the filesystem.

The fix is a simple filemap_write_and_wait on the block device inode
before actually inserting it into the pool of available devices.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch updates the space balancing code to utilize the new
backref format.  Before, btrfs-vol -b would break any COW links
on data blocks or metadata.  This was slow and caused the amount
of space used to explode if a large number of snapshots were present.

The new code can keeps the sharing of all data extents and
most of the tree blocks.

To maintain the sharing of data extents, the space balance code uses
a seperate inode hold data extent pointers, then updates the references
to point to the new location.

To maintain the sharing of tree blocks, the space balance code uses
reloc trees to relocate tree blocks in reference counted roots.
There is one reloc tree for each subvol, and all reloc trees share
same root key objectid. Reloc trees are snapshots of the latest
committed roots of subvols (root->commit_root).

To relocate a tree block referenced by a subvol, there are two steps.
COW the block through subvol's reloc tree, then update block pointer in
the subvol to point to the new block. Since all reloc trees share
same root key objectid, doing special handing for tree blocks
owned by them is easy. Once a tree block has been COWed in one
reloc tree, we can use the resulting new block directly when the
same block is required to COW again through other reloc trees.
In this way, relocated tree blocks are shared between reloc trees,
so they are also shared between subvols.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs has a cache of reference counts in leaves, allowing it to
avoid reading tree leaves while deleting snapshots.  To reduce
contention with multiple subvolumes, this cache is private to each
subvolume.

This patch adds shared reference cache support. The new space
balancing code plays with multiple subvols at the same time, So
the old per-subvol reference cache is not well suited.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs metadata writeback is fairly expensive.  Once a tree block is written
it must be cowed before it can be changed again.  The btree writepages
code has a threshold based on a count of dirty btree bytes which is
updated as IO is sent out.

This changes btree_writepages to skip the writeout if there are less
than 32MB of dirty bytes from the btrees, improving performance
across many workloads.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs had compatibility code for kernels back to 2.6.18.  These have
been removed, and will be maintained in a separate backport
git tree from now on.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes the back reference system to explicit record the
location of parent node for all types of extents. The location of
parent node is placed into the offset field of backref key. Every
time a tree block is balanced, the back references for the affected
lower level extents are updated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Tree blocks were using async bio submission, but the sum was still
being done directly during writepage.  This moves the checksumming
into the worker thread.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size.  The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing.  If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible.  When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.

2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset.  also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.

3) cleaned up the allocation code to make it a little easier to read and a
little less complicated.  Basically there are 3 steps, first look from our
provided hint.  If we couldn't find from that given hint, start back at our
original search start and look for space from there.  If that fails try to
allocate space if we can and start looking again.  If not we're screwed and need
to start over again.

4) small fixes.  there were some issues in volumes.c where we wouldn't allocate
the rest of the disk.  fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space.  Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space.  Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups.  The alloc_hint has fixed
this slight degredation and made things semi-normal.

There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space.  This only happens with metadata
allocations, and only when we are almost full.  So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall.  I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

I had incorrectly disabled the check for the block number being correct
in the header block.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is the same way the transaction code makes sure that all the
other tree blocks are safely on disk.  There's an extent_io tree
for each root, and any blocks allocated to the tree logs are
recorded in that tree.

At tree-log sync, the extent_io tree is walked to flush down the
dirty pages and wait for them.

The main benefit is less time spent walking the tree log and skipping
clean pages, and getting sequential IO down to the drive.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Since tree log blocks get freed every transaction, they never really
need to be written to disk.  This skips the step where we update
metadata to record they were allocated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

* Pin down data blocks to prevent them from being reallocated like so:

trans 1: allocate file extent
trans 2: free file extent
trans 3: free file extent during old snapshot deletion
trans 3: allocate file extent to new file
trans 3: fsync new file

Before the tree logging code, this was legal because the fsync
would commit the transation that did the final data extent free
and the transaction that allocated the extent to the new file
at the same time.

With the tree logging code, the tree log subtransaction can commit
before the transaction that freed the extent.  If we crash,
we're left with two different files using the extent.

* Don't wait in start_transaction if log replay is going on.  This
avoids deadlocks from iput while we're cleaning up link counts in the
replay code.

* Don't deadlock in replay_one_name by trying to read an inode off
the disk while holding paths for the directory

* Hold the buffer lock while we mark a buffer as written.  This
closes a race where someone is changing a buffer while we write it.
They are supposed to mark it dirty again after they change it, but
this violates the cow rules.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

File syncs and directory syncs are optimized by copying their
items into a special (copy-on-write) log tree.  There is one log tree per
subvolume and the btrfs super block points to a tree of log tree roots.

After a crash, items are copied out of the log tree and back into the
subvolume.  See tree-log.c for all the details.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

The current code waits for the count of async bio submits to get below
a given threshold if it is too high right after adding the latest bio
to the work queue.  This isn't optimal because the caller may have
sequential adjacent bios pending they are waiting to send down the pipe.

This changeset requires the caller to wait on the async bio count,
and changes the async checksumming submits to wait for async bios any
time they self throttle.

The end result is much higher sequential throughput.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before, the btrfs bdi congestion function was used to test for too many
async bios.  This keeps that check to throttle pdflush, but also
adds a check while queuing bios.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This takes the csum mutex deeper in the call chain and releases it
more often.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before this change, btrfs would use a bdi congestion function to make
sure there weren't too many pending async checksum work items.

This change makes the process creating async work items wait instead,
leading to fewer congestion returns from the bdi.  This improves
pdflush background_writeout scanning.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

After writing out all the remaining btree blocks in the transaction,
the commit code would use filemap_fdatawait to make sure it was all
on disk.  This means it would wait for blocks written by other procs
as well.

The new code walks the list of blocks for this transaction again
and waits only for those required by this transaction.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

* Make walk_down_tree wake up throttled tasks more often
* Make walk_down_tree call cond_resched during long loops
* As the size of the ref cache grows, wait longer in throttle
* Get rid of the reada code in walk_down_tree, the leaves don't get
  read anymore, thanks to the ref cache.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Large streaming reads make for large bios, which means each entry on the
list async work queues represents a large amount of data.  IO
congestion throttling on the device was kicking in before the async
worker threads decided a single thread was busy and needed some help.

The end result was that a streaming read would result in a single CPU
running at 100% instead of balancing the work off to other CPUs.

This patch also changes the pre-IO checksum lookup done by reads to
work on a per-bio basis instead of a per-page.  This results in many
extra btree lookups on large streaming reads.  Doing the checksum lookup
right before bio submit allows us to reuse searches while processing
adjacent offsets.
Signed-off-by: NChris Mason <chris.mason@oracle.com>