- 07 4月, 2009 6 次提交
-
-
由 Hans Verkuil 提交于
The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Janne Grunau 提交于
Signed-off-by: NJanne Grunau <j@jannau.net> Acked-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Janne Grunau 提交于
Signed-off-by: NJanne Grunau <j@jannau.net> Acked-by: NDevin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Setup the i2c clock speed to be definable on a per-board basis. This allows us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid of code which sets it on a basis of what chip the i2c master is talking to at any given time (which could have caused issues because i2c slaves should never receive commands at a clock higher than their supported clock speed). Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Change the #define entries for the i2c registers to be more meaningful, and document the valid values for the registers. Note that this changeset makes *no* functional changes to the code. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2009 27 次提交
-
-
由 Devin Heitmueller 提交于
Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
au8522 is now dependent of V4L2, as reported by Randy Dunlap <randy.dunlap@oracle.com>: au8522_decoder.c:(.text+0x199898): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x1998b3): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x199944): undefined reference to `v4l2_device_unregister_subdev' au8522_decoder.c:(.text+0x19997c): undefined reference to `v4l2_chip_ident_i2c_client' au8522_decoder.c:(.text+0x199f1e): undefined reference to `v4l2_i2c_subdev_init' Cc: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
As reported by Kyle McMartin and Randy Dunlap: drivers/media/video/au0828/au0828-video.c:1438: error: 'const struct v4l2_subdev_core_ops' has no member named 'g_register' drivers/media/video/au0828/au0828-video.c:1453: error: 'const struct v4l2_subdev_core_ops' has no member named 's_register' This patch properly implements those two API ioctls only when debug is enabled. Cc: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Per Hans Verkuil <hverkuil@xs4all.nl> instruction, remove the deprecated attach_inform/detach_inform routines, and convert over the i2c calls to subdev calls. Thanks to Hans Verkuil <hverkuil@xs4all.nl> for providing feedback on the au0828 analog support. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
The VBI support or the au0828 has the framework written but it does not yet work. Rename the macro per Mauro's request. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Take a pass over all of the au0828/au8522 files and cleanup all the codingstyle issues. This patch does not make *any* functional change to the code. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
For the sake of completeness, include the "undefined" input type enumeration, even though there is no path that can actually call it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
There were some braces left behind from when there was more code in the block. Remove it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
The userland callers are responsible for clearing the output buffers, so remove the unneeded memset calls. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Make sure newly created v4l2 devices have a unique name, modeling the logic after the cx18 driver. Thanks to Andy Walls <awalls@radix.net> for pointing out the issue. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Convert over to using the new subdev framework for the au0828 bridge. This includes using the new i2c probing mechanism. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
If the analog initialization failed to create the video device, we never actually add the entry to the au0828_devlist. Therefore a panic occurs when unregistering the analog subsystem. Make it so we only remove the entry from the list if we added it to the list in the first place. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
It is not valid to look for dev->board.input == NULL to detect an undefined analog configuration section, since it is a member of the struct and not a pointer (hence it will *always* be non-NULL). Do the check based on whether the first input is actually a valid input type instead. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Move the setup of the analog isoc handler into au0828-video.c, so it does not occur if there is not an .input section defined for the board. Also fixes a case where if there is an input section but the board does not actually have analog support, the digital support will continue to work as expected. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Make the g_chip_ident call work for the au0828/au8522. Discovered when testing with the v4l2_compliance tool Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix merge conflict, due to a path change for analog demod] Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Make it a little easier to read the debug messages for register read/write operations Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
There was a bug where enumerating the i2c for devices would result in false positives. The root of the issue was the scanning was using SMBUS_QUICK messages, which are zero length write requests (which our i2c adapter implementation didn't handle). Because we never strobed any bytes onto the bus, the status register would still contain the value from the previous request. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Since the VBI support is not yet working for the au0828, don't advertise the capability or create the /dev/vbi device. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
We don't now how to make any variant of NTSC work other than NTSC-M, so don't advertise that we support the other variants. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Rework the way boards are managed so that we can change the board description based on the Hauppauge eeprom (modeled after cx88-cards.c). Also, make sure that we don't load the analog stack if there are no analog inputs defined in the board profile. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on the various ways different Hauppauge boards can be configured. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add the analog parameters to the device profile for the HVR-850 Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
There is an issue related to the i2c clock for addressing the xc5000. The au0828 chip does not support clock stretching, which the xc5000 makes use of. This results in cases where we silently get back garbage in i2c read operations. To work around this issue until we slow down the i2c clock when talking with that specific device. This was not an issue before we had analog support because we never needed to enumerate the i2c bus, and digital tuning never actually needed to perform read operations against the xc5000. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add support for the analog functionality found in the au0828 bridge Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix compilation by adding linux/version.h] Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
There are still more places where DVB_FE_CUSTOMIZE is used, instead of DVB_FE_CUSTOMISE. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The name of the option is DVB_FE_CUSTOMISE. However, on a few places, a wrong name were used, due to a typo (DVB_FE_CUSTOMIZE). Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 10月, 2008 2 次提交
-
-
由 Steven Toth 提交于
au0828: Checkpatch compliance Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Add autodetection support for a new revision of the Hauppauge HVR950Q (2040:721e) Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 13 10月, 2008 1 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 10月, 2008 2 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Dont pass devptr in xc5000_attach, dont store it in xc5000_priv. This pointer is passed into the tuner_callback function, which always expects a pointer to fe->dvb->priv or i2c_adapter->algo_data. This prevents future possible bugs in new drivers, such as using a "devptr" other that the standard fe->dvb->priv in a DVB driver. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 04 9月, 2008 2 次提交
-
-
由 Steven Toth 提交于
I need this so I can better isolate my linux email from my corporate email. Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Explicitly set 6 MHz IF frequency for VSB and QAM in hauppauge_hvr950q_config. The default value is 6 MHz, so this patch doesn't change anything -- this only improves code readability and may prevent future bugs. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-