selinux_setprocattr() does ptrace_parent(p) under task_lock(p),
but task_struct->alloc_lock doesn't pin ->parent or ->ptrace,
this looks confusing and triggers the "suspicious RCU usage"
warning because ptrace_parent() does rcu_dereference_check().

And in theory this is wrong, spin_lock()->preempt_disable()
doesn't necessarily imply rcu_read_lock() we need to access
the ->parent.
Reported-by: NEvan McNabb <emcnabb@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>

Fix a broken networking check. Return an error if peer recv fails.  If
secmark is active and the packet recv succeeds the peer recv error is
ignored.
Signed-off-by: NChad Hanson <chanson@trustedcs.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>

This reverts commit 102aefdd.

Tom London reports that it causes sync() to hang on Fedora rawhide:

  https://bugzilla.redhat.com/show_bug.cgi?id=1033965

and Josh Boyer bisected it down to this commit.  Reverting the commit in
the rawhide kernel fixes the problem.

Eric Paris root-caused it to incorrect subtype matching in that commit
breaking fuse, and has a tentative patch, but by now we're better off
retrying this in 3.14 rather than playing with it any more.
Reported-by: NTom London <selinux@gmail.com>
Bisected-by: NJosh Boyer <jwboyer@fedoraproject.org>
Acked-by: NEric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Anand Avati <avati@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to difficulty in arriving at the proper security label for
TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets
while/before they are undergoing XFRM transforms instead of waiting
until afterwards so that we can determine the correct security label.
Reported-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>

Previously selinux_skb_peerlbl_sid() would only check for labeled
IPsec security labels on inbound packets, this patch enables it to
check both inbound and outbound traffic for labeled IPsec security
labels.
Reported-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>

In selinux_ip_postroute() we perform access checks based on the
packet's security label.  For locally generated traffic we get the
packet's security label from the associated socket; this works in all
cases except for TCP SYN-ACK packets.  In the case of SYN-ACK packet's
the correct security label is stored in the connection's request_sock,
not the server's socket.  Unfortunately, at the point in time when
selinux_ip_postroute() is called we can't query the request_sock
directly, we need to recreate the label using the same logic that
originally labeled the associated request_sock.

See the inline comments for more explanation.
Reported-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>

In selinux_ip_output() we always label packets based on the parent
socket.  While this approach works in almost all cases, it doesn't
work in the case of TCP SYN-ACK packets when the correct label is not
the label of the parent socket, but rather the label of the larval
socket represented by the request_sock struct.

Unfortunately, since the request_sock isn't queued on the parent
socket until *after* the SYN-ACK packet is sent, we can't lookup the
request_sock to determine the correct label for the packet; at this
point in time the best we can do is simply pass/NF_ACCEPT the packet.
It must be said that simply passing the packet without any explicit
labeling action, while far from ideal, is not terrible as the SYN-ACK
packet will inherit any IP option based labeling from the initial
connection request so the label *should* be correct and all our
access controls remain in place so we shouldn't have to worry about
information leaks.
Reported-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>

Free 'ctx_str' when necessary.
Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

The new templates management mechanism records information associated
to an event into an array of 'ima_field_data' structures and makes it
available through the 'template_data' field of the 'ima_template_entry'
structure (the element of the measurements list created by IMA).

Since 'ima_field_data' contains dynamically allocated data (which length
varies depending on the data associated to a selected template field),
it is not enough to just free the memory reserved for a
'ima_template_entry' structure if something goes wrong.

This patch creates the new function ima_free_template_entry() which
walks the array of 'ima_field_data' structures, frees the memory
referenced by the 'data' pointer and finally the space reserved for
the 'ima_template_entry' structure. Further, it replaces existing kfree()
that have a pointer to an 'ima_template_entry' structure as argument
with calls to the new function.

Fixes: a71dc65d: ima: switch to new template management mechanism
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>

7bc5f447 (ima: define new function ima_alloc_init_template() to
API) moved the initialization of 'entry' in ima_add_boot_aggregate() a
bit more below, after the if (ima_used_chip).

So, 'entry' is not initialized while being inside this if-block. So, we
should not attempt to free it.

Found by Coverity (CID: 1131971)

Fixes: 7bc5f447 (ima: define new function ima_alloc_init_template() to API)
Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>

We have a problem where the big_key key storage implementation uses a
shmem backed inode to hold the key contents.  Because of this detail of
implementation LSM checks are being done between processes trying to
read the keys and the tmpfs backed inode.  The LSM checks are already
being handled on the key interface level and should not be enforced at
the inode level (since the inode is an implementation detail, not a
part of the security model)

This patch implements a new function shmem_kernel_file_setup() which
returns the equivalent to shmem_file_setup() only the underlying inode
has S_PRIVATE set.  This means that all LSM checks for the inode in
question are skipped.  It should only be used for kernel internal
operations where the inode is not exposed to userspace without proper
LSM checking.  It is possible that some other users of
shmem_file_setup() should use the new interface, but this has not been
explored.

Reproducing this bug is a little bit difficult.  The steps I used on
Fedora are:

 (1) Turn off selinux enforcing:

	setenforce 0

 (2) Create a huge key

	k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s`

 (3) Access the key in another context:

	runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null

 (4) Examine the audit logs:

	ausearch -m AVC -i --subject httpd_t | audit2allow

If the last command's output includes a line that looks like:

	allow httpd_t user_tmpfs_t:file { open read };

There was an inode check between httpd and the tmpfs filesystem.  With
this patch no such denial will be seen.  (NOTE! you should clear your
audit log if you have tested for this previously)

(Please return you box to enforcing)
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Hugh Dickins <hughd@google.com>
cc: linux-mm@kvack.org

If a keyring contains more than 16 keyrings (the capacity of a single node in
the associative array) then those keyrings are split over multiple nodes
arranged as a tree.

If search_nested_keyrings() is called to search the keyring then it will
attempt to manually walk over just the 0 branch of the associative array tree
where all the keyring links are stored.  This works provided the key is found
before the algorithm steps from one node containing keyrings to a child node
or if there are sufficiently few keyring links that the keyrings are all in
one node.

However, if the algorithm does need to step from a node to a child node, it
doesn't change the node pointer unless a shortcut also gets transited.  This
means that the algorithm will keep scanning the same node over and over again
without terminating and without returning.

To fix this, move the internal-pointer-to-node translation from inside the
shortcut transit handler so that it applies it to node arrival as well.

This can be tested by:

	r=`keyctl newring sandbox @s`
	for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done
	for ((i=0; i<=16; i++)); do keyctl add user a$i a %:ring$i; done
	for ((i=0; i<=16; i++)); do keyctl search $r user a$i; done
	for ((i=17; i<=20; i++)); do keyctl search $r user a$i; done

The searches should all complete successfully (or with an error for 17-20),
but instead one or more of them will hang.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NStephen Gallagher <sgallagh@redhat.com>

If sufficient keys (or keyrings) are added into a keyring such that a node in
the associative array's tree overflows (each node has a capacity N, currently
16) and such that all N+1 keys have the same index key segment for that level
of the tree (the level'th nibble of the index key), then assoc_array_insert()
calls ops->diff_objects() to indicate at which bit position the two index keys
vary.

However, __key_link_begin() passes a NULL object to assoc_array_insert() with
the intention of supplying the correct pointer later before we commit the
change.  This means that keyring_diff_objects() is given a NULL pointer as one
of its arguments which it does not expect.  This results in an oops like the
attached.

With the previous patch to fix the keyring hash function, this can be forced
much more easily by creating a keyring and only adding keyrings to it.  Add any
other sort of key and a different insertion path is taken - all 16+1 objects
must want to cluster in the same node slot.

This can be tested by:

	r=`keyctl newring sandbox @s`
	for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done

This should work fine, but oopses when the 17th keyring is added.

Since ops->diff_objects() is always called with the first pointer pointing to
the object to be inserted (ie. the NULL pointer), we can fix the problem by
changing the to-be-inserted object pointer to point to the index key passed
into assoc_array_insert() instead.

Whilst we're at it, we also switch the arguments so that they are the same as
for ->compare_object().

BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
IP: [<ffffffff81191ee4>] hash_key_type_and_desc+0x18/0xb0
...
RIP: 0010:[<ffffffff81191ee4>] hash_key_type_and_desc+0x18/0xb0
...
Call Trace:
 [<ffffffff81191f9d>] keyring_diff_objects+0x21/0xd2
 [<ffffffff811f09ef>] assoc_array_insert+0x3b6/0x908
 [<ffffffff811929a7>] __key_link_begin+0x78/0xe5
 [<ffffffff81191a2e>] key_create_or_update+0x17d/0x36a
 [<ffffffff81192e0a>] SyS_add_key+0x123/0x183
 [<ffffffff81400ddb>] tracesys+0xdd/0xe2
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NStephen Gallagher <sgallagh@redhat.com>

The keyring hash function (used by the associative array) is supposed to clear
the bottommost nibble of the index key (where the hash value resides) for
keyrings and make sure it is non-zero for non-keyrings.  This is done to make
keyrings cluster together on one branch of the tree separately to other keys.

Unfortunately, the wrong mask is used, so only the bottom two bits are
examined and cleared and not the whole bottom nibble.  This means that keys
and keyrings can still be successfully searched for under most circumstances
as the hash is consistent in its miscalculation, but if a keyring's
associative array bottom node gets filled up then approx 75% of the keyrings
will not be put into the 0 branch.

The consequence of this is that a key in a keyring linked to by another
keyring, ie.

	keyring A -> keyring B -> key

may not be found if the search starts at keyring A and then descends into
keyring B because search_nested_keyrings() only searches up the 0 branch (as it
"knows" all keyrings must be there and not elsewhere in the tree).

The fix is to use the right mask.

This can be tested with:

	r=`keyctl newring sandbox @s`
	for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done
	for ((i=0; i<=16; i++)); do keyctl add user a$i a %:ring$i; done
	for ((i=0; i<=16; i++)); do keyctl search $r user a$i; done

This creates a sandbox keyring, then creates 17 keyrings therein (labelled
ring0..ring16).  This causes the root node of the sandbox's associative array
to overflow and for the tree to have extra nodes inserted.

Each keyring then is given a user key (labelled aN for ringN) for us to search
for.

We then search for the user keys we added, starting from the sandbox.  If
working correctly, it should return the same ordered list of key IDs as
for...keyctl add... did.  Without this patch, it reports ENOKEY "Required key
not available" for some of the keys.  Just which keys get this depends as the
kernel pointer to the key type forms part of the hash function.
Reported-by: NNalin Dahyabhai <nalin@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NStephen Gallagher <sgallagh@redhat.com>

The second word of key->payload does not get initialised in key_alloc(), but
the big_key type is relying on it having been cleared.  The problem comes when
big_key fails to instantiate a large key and doesn't then set the payload.  The
big_key_destroy() op is called from the garbage collector and this assumes that
the dentry pointer stored in the second word will be NULL if instantiation did
not complete.

Therefore just pre-clear the entire struct key on allocation rather than trying
to be clever and only initialising to 0 only those bits that aren't otherwise
initialised.

The lack of initialisation can lead to a bug report like the following if
big_key failed to initialise its file:

	general protection fault: 0000 [#1] SMP
	Modules linked in: ...
	CPU: 0 PID: 51 Comm: kworker/0:1 Not tainted 3.10.0-53.el7.x86_64 #1
	Hardware name: Dell Inc. PowerEdge 1955/0HC513, BIOS 1.4.4 12/09/2008
	Workqueue: events key_garbage_collector
	task: ffff8801294f5680 ti: ffff8801296e2000 task.ti: ffff8801296e2000
	RIP: 0010:[<ffffffff811b4a51>] dput+0x21/0x2d0
	...
	Call Trace:
	 [<ffffffff811a7b06>] path_put+0x16/0x30
	 [<ffffffff81235604>] big_key_destroy+0x44/0x60
	 [<ffffffff8122dc4b>] key_gc_unused_keys.constprop.2+0x5b/0xe0
	 [<ffffffff8122df2f>] key_garbage_collector+0x1df/0x3c0
	 [<ffffffff8107759b>] process_one_work+0x17b/0x460
	 [<ffffffff8107834b>] worker_thread+0x11b/0x400
	 [<ffffffff81078230>] ? rescuer_thread+0x3e0/0x3e0
	 [<ffffffff8107eb00>] kthread+0xc0/0xd0
	 [<ffffffff8107ea40>] ? kthread_create_on_node+0x110/0x110
	 [<ffffffff815c4bec>] ret_from_fork+0x7c/0xb0
	 [<ffffffff8107ea40>] ? kthread_create_on_node+0x110/0x110
Reported-by: NPatrik Kis <pkis@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NStephen Gallagher <sgallagh@redhat.com>

This patch stores the address of the 'template_fmt_copy' variable in a new
variable, called 'template_fmt_ptr', so that the latter is passed as an
argument of strsep() instead of the former. This modification is needed
in order to correctly free the memory area referenced by
'template_fmt_copy' (strsep() modifies the pointer of the passed string).
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

This patch makes a copy of the 'template_fmt' function argument so that
the latter will not be modified by strsep(), which does the splitting by
replacing the given separator with '\0'.

 IMA: No TPM chip found, activating TPM-bypass!
 Unable to handle kernel pointer dereference at virtual kernel address 0000000000842000
 Oops: 0004 [#1] SMP
 Modules linked in:
 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00098-g3ce1217d #17
 task: 000000003ffa0000 ti: 000000003ff84000 task.ti: 000000003ff84000
 Krnl PSW : 0704e00180000000 000000000044bf88 (strsep+0x7c/0xa0)
            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3
 Krnl GPRS: 000000000000007c 000000000000007c 000000003ff87d90 0000000000821fd8
            0000000000000000 000000000000007c 0000000000aa37e0 0000000000aa9008
            0000000000000051 0000000000a114d8 0000000100000002 0000000000842bde
            0000000000842bdf 00000000006f97f0 000000000040062c 000000003ff87cf0
 Krnl Code: 000000000044bf7c: a7f4000a           brc     15,44bf90
            000000000044bf80: b90200cc           ltgr    %r12,%r12
           #000000000044bf84: a7840006           brc     8,44bf90
           >000000000044bf88: 9200c000           mvi     0(%r12),0
            000000000044bf8c: 41c0c001           la      %r12,1(%r12)
            000000000044bf90: e3c020000024       stg     %r12,0(%r2)
            000000000044bf96: b904002b           lgr     %r2,%r11
            000000000044bf9a: ebbcf0700004       lmg     %r11,%r12,112(%r15)
 Call Trace:
 ([<00000000004005fe>] ima_init_template+0xa2/0x1bc)
  [<0000000000a7c896>] ima_init+0x7a/0xa8
  [<0000000000a7c938>] init_ima+0x24/0x40
  [<00000000001000e8>] do_one_initcall+0x68/0x128
  [<0000000000a4eb56>] kernel_init_freeable+0x20a/0x2b4
  [<00000000006a1ff4>] kernel_init+0x30/0x178
  [<00000000006b69fe>] kernel_thread_starter+0x6/0xc
  [<00000000006b69f8>] kernel_thread_starter+0x0/0xc
 Last Breaking-Event-Address:
  [<000000000044bf42>] strsep+0x36/0xa0

Fixes commit: adf53a77 ima: new templates management mechanism

Changelog v1:
- make template_fmt 'const char *' (reported-by James Morris)
- fix kstrdup memory leak (reported-by James Morris)
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

This patch defines a new value for the 'ima_show_type' enumerator
(IMA_SHOW_BINARY_NO_FIELD_LEN) to prevent that the field length
is transmitted through the 'binary_runtime_measurements' interface
for the digest field of the 'ima' template.

Fixes commit: 3ce1217d ima: define template fields library and new helpers
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

To maintain compatibility with userspace tools, the field length must not
be included in the template digest calculation for the 'ima' template.

Fixes commit: a71dc65d ima: switch to new template management mechanism
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This reverts commit 217091dd, which
caused the following build error:

  security/integrity/digsig.c:70:5: error: redefinition of ‘integrity_init_keyring’
  security/integrity/integrity.h:149:12: note: previous definition of ‘integrity_init_keyring’ w
  security/integrity/integrity.h:149:12: warning: ‘integrity_init_keyring’ defined but not used

reported by Krzysztof Kolasa. Mimi says:

 "I made the classic mistake of requesting this patch to be upstreamed
  at the last second, rather than waiting until the next open window.

  At this point, the best course would probably be to revert the two
  commits and fix them for the next open window"
Reported-by: NKrzysztof Kolasa <kkolasa@winsoft.pl>
Acked-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Key pointers stored in the keyring are marked in bit 1 to indicate if they
point to a keyring.  We need to strip off this bit before using the pointer
when iterating over the keyring for the purpose of looking for links to garbage
collect.

This means that expirable keyrings aren't correctly expiring because the
checker is seeing their key pointer with 2 added to it.

Since the fix for this involves knowing about the internals of the keyring,
key_gc_keyring() is moved to keyring.c and merged into keyring_gc().

This can be tested by:

	echo 2 >/proc/sys/kernel/keys/gc_delay
	keyctl timeout `keyctl add keyring qwerty "" @s` 2
	cat /proc/keys
	sleep 5; cat /proc/keys

which should see a keyring called "qwerty" appear in the session keyring and
then disappear after it expires, and:

	echo 2 >/proc/sys/kernel/keys/gc_delay
	a=`keyctl get_persistent @s`
	b=`keyctl add keyring 0 "" $a`
	keyctl add user a a $b
	keyctl timeout $b 2
	cat /proc/keys
	sleep 5; cat /proc/keys

which should see a keyring called "0" with a key called "a" in it appear in the
user's persistent keyring (which will be attached to the session keyring) and
then both the "0" keyring and the "a" key should disappear when the "0" keyring
expires.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSimo Sorce <simo@redhat.com>

In the big_key_instantiate() function we return 0 if kernel_write() returns us
an error rather than returning an error.  This can potentially lead to
dentry_open() giving a BUG when called from big_key_read() with an unset
tmpfile path.

	------------[ cut here ]------------
	kernel BUG at fs/open.c:798!
	...
	RIP: 0010:[<ffffffff8119bbd1>] dentry_open+0xd1/0xe0
	...
	Call Trace:
	 [<ffffffff812350c5>] big_key_read+0x55/0x100
	 [<ffffffff81231084>] keyctl_read_key+0xb4/0xe0
	 [<ffffffff81231e58>] SyS_keyctl+0xf8/0x1d0
	 [<ffffffff815bb799>] system_call_fastpath+0x16/0x1b
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NStephen Gallagher <sgallagh@redhat.com>

If the UID is specified by userspace when calling the KEYCTL_GET_PERSISTENT
function and the process does not have the CAP_SETUID capability, then the
function will return -EPERM if the current process's uid, suid, euid and fsuid
all match the requested UID.  This is incorrect.

Fix it such that when a non-privileged caller requests a persistent keyring by
a specific UID they can only request their own (ie. the specified UID matches
either then process's UID or the process's EUID).

This can be tested by logging in as the user and doing:

	keyctl get_persistent @p
	keyctl get_persistent @p `id -u`
	keyctl get_persistent @p 0

The first two should successfully print the same key ID.  The third should do
the same if called by UID 0 or indicate Operation Not Permitted otherwise.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NStephen Gallagher <sgallagh@redhat.com>

Supress the stock memory allocation failure warnings for audit buffers
since audit alreay takes care of memory allocation failure warnings, including
rate-limiting, in audit_log_start().
Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

We use the read check to get the feature set (like AUDIT_GET) and the
write check to set the features (like AUDIT_SET).
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Require all keys added to the IMA keyring be signed by an
existing trusted key on the system trusted keyring.

Changelog:
- define stub integrity_init_keyring() function (reported-by Fengguang Wu)
- differentiate between regular and trusted keyring names.
- replace printk with pr_info (D. Kasatkin)
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>

This patch defines a new template called 'ima-sig', which includes
the file signature in the template data, in addition to the file's
digest and pathname.

A template is composed of a set of fields.  Associated with each
field is an initialization and display function.  This patch defines
a new template field called 'sig', the initialization function
ima_eventsig_init(), and the display function ima_show_template_sig().

This patch modifies the .field_init() function definition to include
the 'security.ima' extended attribute and length.

Changelog:
- remove unused code (Dmitry Kasatkin)
- avoid calling ima_write_template_field_data() unnecesarily (Roberto Sassu)
- rename DATA_FMT_SIG to DATA_FMT_HEX
- cleanup ima_eventsig_init() based on Roberto's comments
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

If a key is displaced from a keyring by a matching one, then four more bytes
of quota are allocated to the keyring - despite the fact that the keyring does
not change in size.

Further, when a key is unlinked from a keyring, the four bytes of quota
allocated the link isn't recovered and returned to the user's pool.

The first can be tested by repeating:

	keyctl add big_key a fred @s
	cat /proc/key-users

(Don't put it in a shell loop otherwise the garbage collector won't have time
to clear the displaced keys, thus affecting the result).

This was causing the kerberos keyring to run out of room fairly quickly.

The second can be tested by:

	cat /proc/key-users
	a=`keyctl add user a a @s`
	cat /proc/key-users
	keyctl unlink $a
	sleep 1 # Give RCU a chance to delete the key
	cat /proc/key-users

assuming no system activity that otherwise adds/removes keys, the amount of
key data allocated should go up (say 40/20000 -> 47/20000) and then return to
the original value at the end.
Reported-by: NStephen Gallagher <sgallagh@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

key_reject_and_link() marking a key as negative and setting the error with
which it was negated races with keyring searches and other things that read
that error.

The fix is to switch the order in which the assignments are done in
key_reject_and_link() and to use memory barriers.

Kudos to Dave Wysochanski <dwysocha@redhat.com> and Scott Mayhew
<smayhew@redhat.com> for tracking this down.

This may be the cause of:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
IP: [<ffffffff81219011>] wait_for_key_construction+0x31/0x80
PGD c6b2c3067 PUD c59879067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
CPU 0
Modules linked in: ...

Pid: 13359, comm: amqzxma0 Not tainted 2.6.32-358.20.1.el6.x86_64 #1 IBM System x3650 M3 -[7945PSJ]-/00J6159
RIP: 0010:[<ffffffff81219011>] wait_for_key_construction+0x31/0x80
RSP: 0018:ffff880c6ab33758  EFLAGS: 00010246
RAX: ffffffff81219080 RBX: 0000000000000000 RCX: 0000000000000002
RDX: ffffffff81219060 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff880c6ab33768 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff880adfcbce40
R13: ffffffffa03afb84 R14: ffff880adfcbce40 R15: ffff880adfcbce43
FS:  00007f29b8042700(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000070 CR3: 0000000c613dc000 CR4: 00000000000007f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process amqzxma0 (pid: 13359, threadinfo ffff880c6ab32000, task ffff880c610deae0)
Stack:
 ffff880adfcbce40 0000000000000000 ffff880c6ab337b8 ffffffff81219695
<d> 0000000000000000 ffff880a000000d0 ffff880c6ab337a8 000000000000000f
<d> ffffffffa03afb93 000000000000000f ffff88186c7882c0 0000000000000014
Call Trace:
 [<ffffffff81219695>] request_key+0x65/0xa0
 [<ffffffffa03a0885>] nfs_idmap_request_key+0xc5/0x170 [nfs]
 [<ffffffffa03a0eb4>] nfs_idmap_lookup_id+0x34/0x80 [nfs]
 [<ffffffffa03a1255>] nfs_map_group_to_gid+0x75/0xa0 [nfs]
 [<ffffffffa039a9ad>] decode_getfattr_attrs+0xbdd/0xfb0 [nfs]
 [<ffffffff81057310>] ? __dequeue_entity+0x30/0x50
 [<ffffffff8100988e>] ? __switch_to+0x26e/0x320
 [<ffffffffa039ae03>] decode_getfattr+0x83/0xe0 [nfs]
 [<ffffffffa039b610>] ? nfs4_xdr_dec_getattr+0x0/0xa0 [nfs]
 [<ffffffffa039b69f>] nfs4_xdr_dec_getattr+0x8f/0xa0 [nfs]
 [<ffffffffa02dada4>] rpcauth_unwrap_resp+0x84/0xb0 [sunrpc]
 [<ffffffffa039b610>] ? nfs4_xdr_dec_getattr+0x0/0xa0 [nfs]
 [<ffffffffa02cf923>] call_decode+0x1b3/0x800 [sunrpc]
 [<ffffffff81096de0>] ? wake_bit_function+0x0/0x50
 [<ffffffffa02cf770>] ? call_decode+0x0/0x800 [sunrpc]
 [<ffffffffa02d99a7>] __rpc_execute+0x77/0x350 [sunrpc]
 [<ffffffff81096c67>] ? bit_waitqueue+0x17/0xd0
 [<ffffffffa02d9ce1>] rpc_execute+0x61/0xa0 [sunrpc]
 [<ffffffffa02d03a5>] rpc_run_task+0x75/0x90 [sunrpc]
 [<ffffffffa02d04c2>] rpc_call_sync+0x42/0x70 [sunrpc]
 [<ffffffffa038ff80>] _nfs4_call_sync+0x30/0x40 [nfs]
 [<ffffffffa038836c>] _nfs4_proc_getattr+0xac/0xc0 [nfs]
 [<ffffffff810aac87>] ? futex_wait+0x227/0x380
 [<ffffffffa038b856>] nfs4_proc_getattr+0x56/0x80 [nfs]
 [<ffffffffa0371403>] __nfs_revalidate_inode+0xe3/0x220 [nfs]
 [<ffffffffa037158e>] nfs_revalidate_mapping+0x4e/0x170 [nfs]
 [<ffffffffa036f147>] nfs_file_read+0x77/0x130 [nfs]
 [<ffffffff811811aa>] do_sync_read+0xfa/0x140
 [<ffffffff81096da0>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff8100bb8e>] ? apic_timer_interrupt+0xe/0x20
 [<ffffffff8100b9ce>] ? common_interrupt+0xe/0x13
 [<ffffffff81228ffb>] ? selinux_file_permission+0xfb/0x150
 [<ffffffff8121bed6>] ? security_file_permission+0x16/0x20
 [<ffffffff81181a95>] vfs_read+0xb5/0x1a0
 [<ffffffff81181bd1>] sys_read+0x51/0x90
 [<ffffffff810dc685>] ? __audit_syscall_exit+0x265/0x290
 [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Dave Wysochanski <dwysocha@redhat.com>
cc: Scott Mayhew <smayhew@redhat.com>

Having the big_keys functionality as a module is very marginally useful.
The userspace code that would use this functionality will get odd error
messages from the keys layer if the module isn't loaded.  The code itself
is fairly small, so just have this as a boolean option and not a tristate.
Signed-off-by: NJosh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Unless task == current ptrace_parent(task) is not safe even under
rcu_read_lock() and most of the current users are not right.

So may_change_ptraced_domain(task) looks wrong as well. However it
is always called with task == current so the code is actually fine.
Remove this argument to make this fact clear.

Note: perhaps we should simply kill ptrace_parent(), it buys almost
nothing. And it is obviously racy, perhaps this should be fixed.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>

The reporting of the parent task info is a vestage from old versions of
apparmor. The need for this information was removed by unique null-
profiles before apparmor was upstreamed so remove this info from logging.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>

Now that aa_capabile no longer sets the task field it can be removed
and the lsm_audit version of the field can be used.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>

Mediation is based off of the cred but auditing includes the current
task which may not be related to the actual request.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>

When the ptrace security hooks were split the addition of
a mode parameter was not taken advantage of in the Smack
ptrace access check. This changes the access check from
always looking for read and write access to using the
passed mode. This will make use of /proc much happier.

Targeted for git://git.gitorious.org/smack-next/kernel.gitSigned-off-by: NCasey Schaufler <casey@schaufler-ca.com>

All files labeled with 'security.ima' hashes, are hashed using the
same hash algorithm.  Changing from one hash algorithm to another,
requires relabeling the filesystem.  This patch defines a new xattr
type, which includes the hash algorithm, permitting different files
to be hashed with different algorithms.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The IMA measurement list contains two hashes - a template data hash
and a filedata hash.  The template data hash is committed to the TPM,
which is limited, by the TPM v1.2 specification, to 20 bytes.  The
filedata hash is defined as 20 bytes as well.

Now that support for variable length measurement list templates was
added, the filedata hash is not limited to 20 bytes.  This patch adds
Kconfig support for defining larger default filedata hash algorithms
and replacing the builtin default with one specified on the kernel
command line.

<uapi/linux/hash_info.h> contains a list of hash algorithms.  The
Kconfig default hash algorithm is a subset of this list, but any hash
algorithm included in the list can be specified at boot, using the
'ima_hash=' kernel command line option.

Changelog v2:
- update Kconfig

Changelog:
- support hashes that are configured
- use generic HASH_ALGO_ definitions
- add Kconfig support
- hash_setup must be called only once (Dmitry)
- removed trailing whitespaces (Roberto Sassu)
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>

This patch allows users to specify from the kernel command line the
template descriptor, among those defined, that will be used to generate
and display measurement entries. If an user specifies a wrong template,
IMA reverts to the template descriptor set in the kernel configuration.
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This patch adds a Kconfig option to select the default IMA
measurement list template.  The 'ima' template limited the
filedata hash to 20 bytes and the pathname to 255 charaters.
The 'ima-ng' measurement list template permits larger hash
digests and longer pathnames.

Changelog:
- keep 'select CRYPTO_HASH_INFO' in 'config IMA' section (Kconfig)
  (Roberto Sassu);
- removed trailing whitespaces (Roberto Sassu).
- Lindent fixes
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>