The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: NAndreas Utterberg <andreas.utterberg@thundera.se>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Since there are now multiple HDMI attributes associated with the WMAX method,
create a sysfs group for them instead.
Signed-off-by: NMario Limonciello <mario_limonciello@dell.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

This more closely reflects what the hardware can actually support.
Signed-off-by: NMario Limonciello <mario_limonciello@dell.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

We've observed the missing pvpanic call at panic, and it turned out
that this was blocked by the broken notifier of drm_fb_helper, where
scheduling may be called during switching to the fb console.
It's fairly difficult to fix the drm_fb problem and a quick fix isn't
foreseen, a simpler solution for the missing pvpanic call would be
just to call this earlier.

In order to assure that, this patch sets a higher priority to pvpanic
notifier_block.  Once when the issue of drm_fb is resolved, we can
remove this priority again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

These models have only 4 levels of keyboard backlight brightness and forget
how to work the backlight after resuming from S3 sleep. I've added a quirk
to set the appropriate number of backlight levels, and one to re-enable the
keyboard backlight on resume.

(Whitespace cleaned up by Matthew Garrett)
Signed-off-by: NScott Thrasher <scott.thrasher@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Toshiba Satellite M840 laptop has a complete different keymap although
it's bound with the same ACPI ID "TOS1900".  This patch provides an
alternative keymap specific to this machine by identifying via DMI
matching.  The keymap table doesn't fill all entries that were used
before since some keys aren't found on this machine at all.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69761
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812209Reported-and-tested-by: NFederico Vecchiarelli <fedev@gmx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Only pin 0-7 support input, so the valid offset range should be 0 ~ 7.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

pci_bus_add_device() always returns 0, so there's no point in returning
anything at all.  Make it a void function and remove the tests of the
return value from the callers.

[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The Aspire 5741 has broken acpi-video backlight control, so add it to the
quirk table.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1012674Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Switch from acpi_video_unregister(), to acpi_video_unregister_backlight(),
so that the hotkeys handler registered by acpi-video stays in place.

Since there are no mappings for the atkbd raw codes for the brightness
keys used by newer Acer models in /lib/udev/hwdb.d/60-keyboard.hwdb, and
since we map the wmi events with a code of KE_IGNORE, we rely on acpi-video
to do the hotkey handling for us.

For laptops such as the Acer Aspire 5750 which uses intel gfx this works
despite us calling acpi_video_unregister() because the following happens:

 1) acpi-video module gets loaded (as it is a dependency of acer-wmi and i915)
 2) acpi-video does NOT call acpi_video_register()
 3) acer-wmi loads (assume it loads before i915), calls
    acpi_video_dmi_promote_vendor(); which sets
    ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
 4) calls acpi_video_unregister -> not registered, nop
 5) i915 loads, calls acpi_video_register
 6) acpi_video_register registers the acpi_notifier for the hotkeys,
    does NOT register a backlight device because of
    ACPI_VIDEO_BACKLIGHT_DMI_VENDOR

But on the Acer Aspire 5750G, which uses nvidia graphics the following happens:
 1) acpi-video module gets loaded (as it is a dependency of acer-wmi)
 2) acpi-video calls acpi_video_register()
 3) acpi_video_register registers the acpi_notifier for the hotkeys,
    and a backlight device
 4) acer-wmi loads, calls acpi_video_dmi_promote_vendor()
 5) calls acpi_video_unregister, this unregisters BOTH the acpi_notifier for
    the hotkeys AND the backlight device

And we end up without any handler for the brightness hotkeys. This patch fixes
this by switching over to acpi_video_unregister_backlight() which keeps the
hotkey handler in place.

References: https://bugzilla.kernel.org/show_bug.cgi?id=35622Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Intel test builder caught a few instances that should test if kzalloc failed to
allocate memory as well as a scenario that platform_driver wasn't properly
initialized.
Signed-off-by: NMario Limonciello <mario_limonciello@dell.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The only real change is passing in event_mask to the formerly nested functions.
Otherwise it's just moving around function and macro code.

This is the only place in the Linux kernel where nested functions are still in
use. Nested functions aren't part of the C standards, and complicate the
generated code. Although the Linux Kernel has never set out to be entirely C
standard compliant, it is increasingly compliant to the standard which is
supported by other compilers such as Clang. The LLVMLinux project is working on
being able to compile the Linux kernel with Clang. The use of nested functions
blocks this effort.
Signed-off-by: NBehan Webster <behanw@converseincode.com>
Signed-off-by: NJan-Simon Möller <dl9pf@gmx.de>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>

Signed-off-by: NMario Limonciello <mario_limonciello@dell.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The button mappings for the Fujitsu Lifebook T901 and T902 are quite different
from the generic Lifebook T mappings that are defined. This patch adds
mappings that are specific to the hardware on these machines, and allows
users to take advantage of features like screen rotation.
Signed-off-by: NScott K Logan <logans@cottsay.net>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

... so that one can know what this option is about without opening the
long help text.

Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The only real change is passing in event_mask to the formerly nested functions.
Otherwise it's just moving around function and macro code.

This is the only place in the Linux kernel where nested functions are still in
use. Nested functions aren't part of the C standards, and complicate the
generated code. Although the Linux Kernel has never set out to be entirely C
standard compliant, it is increasingly compliant to the standard which is
supported by other compilers such as Clang. The LLVMLinux project is working on
being able to compile the Linux kernel with Clang. The use of nested functions
blocks this effort.
Signed-off-by: NBehan Webster <behanw@converseincode.com>
Signed-off-by: NJan-Simon Möller <dl9pf@gmx.de>

CC: David Woodhouse <David.Woodhouse@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: ibm-acpi-devel@lists.sourceforge.net
CC: platform-driver-x86@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Dan Aloni has submitted a patch to set adaptive mode to function mode
when system resume back. Thanks Dan. :)

Following patch can make it to be restored to previous mode like What
Windows does.

Thanks,
Shuduo

>From 0ca960138518ceab23110141a0d7c0cafd54a859 Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Thu, 27 Mar 2014 17:51:24 +0800
Subject: [PATCH] save and restore adaptive keyboard mode for suspend and
 resume

The mode of adaptive keyboard on X1 Carbon need be saved first before
suspend then it can be restored after resume. Otherwise it will be
unusable.
Signed-off-by: NBruce Ma <bruce.ma@canonical.com>
Signed-off-by: NShuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Submit patch V4 to support Adaptive Keyboard on Thinkpad X1 Carbon 2nd
generation according to Tobias's comments.

Thanks,
Shuduo

>From b153a7b14791c6e01892c0e274e23eefd625fb8d Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Mon, 3 Mar 2014 14:29:32 +0800
Subject: [PATCH] support thinkpad X1 Carbon's adaptive keyboard

Thinkpad X1 Carbon's adaptive keyboard has five modes including Home
mode, Web browser mode, Web conference mode, Function mode and Lay-flat
mode. We support Home mode and Function mode currently.
Signed-off-by: NBruce Ma <bruce.ma@canonical.com>
Signed-off-by: NShuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Tidy up whitespace introduced by the previous patchset
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Given that some new features were added to the
driver, bump its version to 0.20 and add myself
to the copyright list for these new features
that were added.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Recent Toshiba laptops now come equiped with a built in
accelerometer (TOS620A) device, but such device does not
expose the axes information, however, HCI calls 0x006d
and 0x00a6 can be used to query such info.

This patch adds support to read the axes values by
exposing them through the _position_ sysfs file.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Newer Toshiba laptops now come with a feature called
ECO Mode, where the system is put in low power consupmtion
state and a green (world shaped with leaves) icon illuminates
indicating that the system is in such power state.

This patch adds support to turn on/off the ECO led by
creating and registering the toshiba::eco_mode led.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Toshiba laptops have two ways of letting userspace
know the touchpad has changed state, one with a
button on top of the touchpad that simply emmits
scancodes whenever enabled/disabled, and another one
by pressing Fn-F9 (touchpad toggle) hotkey.

This patch adds support to enable/disable the touchpad
by exposing the _touchpad_ file in sysfs that simply
makes a call to a SCI register, imitating what
Toshiba provided software does on Windows.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Toshiba laptops equiped with an illuminated keyboard
can operate in two different modes: Auto and FN-Z.

The Auto mode turns on the led on keystrokes and
automatically turns it off after some (configurable)
time the last key was pressed.

The FN-Z mode is used to toggle the keyboard led on/off
by userspace.

This patch adds support to set the desired KBD mode and
timeout via sysfs, creates and registers toshiba::kbd_backlight
led device whenever the mode is set to FN-Z.

The acceptable values for mode are: 1 (Auto) and 2 (Fn-Z)
The time values range are: 1-60 seconds
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Change the toshiba_illumination_* code to use the
newly introduced SCI functions, making the code
more robust in detecting Illumination capabilities
properly, since it was only opening the SCI and
the return value was never checked for errors or
actual Illumination support.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

SCI stands for System Configuration Interface,
which aim is to conceal differences in hardware
between different models.

This patch introduces four new calls: sci_open,
sci_close, sci_read and sci_write, along with
its definitions and return codes which will be
used by later patches.

More information about the SCI can be found at
Jonathan Buzzard's website [1].

[1] http://www.buzzard.me.uk/toshiba/docs.htmlSigned-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The mute LED states have to be restored after resume.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70351
Cc: <stable@vger.kernel.org> [v3.13+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

This reverts commit 997ab407. This driver is
replaced by the more general SOC IOSF driver in commit 46184415.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The current value is not available through the SNC device and therefore
the attribute is writable only.
Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Keyboard backlight can be always off, use some automatic trigger
(activity and light sensor), always on.
The behaviour of the driver changes whereby previously when passed 1 it
tried to turn on backlight immediately now it does nothing. This is
however a bug fix since (a) it makes little sense to turn on the
backlight when control is automatic and (b) this behaviour is
consistent with what the windows driver does.
Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Rework error exit logic by Mattia Dongili.
Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Allows to specify if the USB socket should charge attached devices while
the laptop is suspended to ram.
Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Vaio Pro uses a different handle and doesn't support all the options as
other models (only S5 setting v/s S3/4/5).

Minor code rework to generalize functions by Mattia Dongili.
Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NJavier Achirica <jachirica@gmail.com>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Hi all,

my panasonic cf-51 does no longer react to the suspend and hibernate
keys. I cannot tell when this started since I no longer use the machine
on a daily basis, but I suspect it started when userspace switched from
using /proc/acpi/event to the input layer, wich was quite some time ago ;-)

Today I investigated the issue and found that the firmware simply does
not generate any event on "key down" for those keys, but only on "key up".

The attached patch works around the problem.

Best regards,

	Stefan
--
Stefan Seyfried
Linux Consultant & Developer -- GPG Key: 0x731B665B

B1 Systems GmbH
Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de
GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537

>From 7c96fee748cfd3e64732a7ac142f5dea07d7379f Mon Sep 17 00:00:00 2001
From: Stefan Seyfried <seife+kernel@b1-systems.com>
Date: Sun, 2 Mar 2014 17:50:01 +0100
Subject: [PATCH] panasonic-laptop: fix sleep keys on CF-51

At least on my CF-51, both sleep and hibernate keys do not
generate "key down" events, only "key up". Because of this,
the input layer does ignore both keys. The work around is
to generate a key down event before the key up. To avoid
double events on non-broken firmware, this is only done if
no key down is ever seen for those keys.
Signed-off-by: NStefan Seyfried <seife+kernel@b1-systems.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The fujitsu-laptop driver includes <linux/video_output.h> but doesn't
call any of its functions. Drop the unneeded include to avoid
unnecessary driver rebuilds.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NJonathan Woithe <jwoithe@just42.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by: N"Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>