Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 11 12月, 2014 1 次提交
    • X
      x86/mm: Fix zone ranges boot printout · c072b90c
      由 Xishi Qiu 提交于 
      This is the usual physical memory layout boot printout:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
	[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0xbf78ffff]
	[    0.000000]   node   0: [mem 0x100000000-0x63fffffff]
	[    0.000000]   node   1: [mem 0x640000000-0xc3fffffff]
	...

This is the log when we set "mem=2G" on the boot cmdline:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]  // should be 0x7fffffff, right?
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...

This patch fixes the printout, the following log shows the right
ranges:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0x7fffffff]
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Cc: Linux MM <linux-mm@kvack.org>
Cc: <dave@sr71.net>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/5487AB3D.6070306@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c072b90c
  3. 01 12月, 2014 1 次提交
  5. 24 11月, 2014 1 次提交
  7. 21 11月, 2014 1 次提交
  9. 19 11月, 2014 3 次提交
  11. 17 11月, 2014 1 次提交
    • L
      x86-64: make csum_partial_copy_from_user() error handling consistent · 3b91270a
      由 Linus Torvalds 提交于 
      Al Viro pointed out that the x86-64 csum_partial_copy_from_user() is
somewhat confused about what it should do on errors, notably it mostly
clears the uncopied end result buffer, but misses that for the initial
alignment case.

All users should check for errors, so it's dubious whether the clearing
is even necessary, and Al also points out that we should probably clean
up the calling conventions, but regardless of any future changes to this
function, the fact that it is inconsistent is just annoying.

So make the __get_user() failure path use the same error exit as all the
other errors do.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3b91270a
  13. 16 11月, 2014 3 次提交
  15. 10 11月, 2014 2 次提交
  17. 06 11月, 2014 1 次提交
  19. 05 11月, 2014 1 次提交
  21. 04 11月, 2014 1 次提交
  23. 02 11月, 2014 5 次提交
    • P
      KVM: vmx: defer load of APIC access page address during reset · a73896cb
      由 Paolo Bonzini 提交于 
      Most call paths to vmx_vcpu_reset do not hold the SRCU lock.  Defer loading
the APIC access page to the next vmentry.

This avoids the following lockdep splat:

[ INFO: suspicious RCU usage. ]
3.18.0-rc2-test2+ #70 Not tainted
-------------------------------
include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-x86/2371:
 #0:  (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]

stack backtrace:
CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
 ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
 ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
Call Trace:
 [<ffffffff816f514f>] dump_stack+0x4e/0x71
 [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
 [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
 [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
 [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
 [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
 [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
 [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
 [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
 [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
 [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
 [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
 [<ffffffff8122ee45>] ? __fget+0x5/0x250
 [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
 [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
 [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
Reported-by: NTakashi Iwai <tiwai@suse.de>
Reported-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Fixes: 38b99173Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      a73896cb
    • J
      KVM: nVMX: Disable preemption while reading from shadow VMCS · 282da870
      由 Jan Kiszka 提交于 
      In order to access the shadow VMCS, we need to load it. At this point,
vmx->loaded_vmcs->vmcs and the actually loaded one start to differ. If
we now get preempted by Linux, vmx_vcpu_put and, on return, the
vmx_vcpu_load will work against the wrong vmcs. That can cause
copy_shadow_to_vmcs12 to corrupt the vmcs12 state.

Fix the issue by disabling preemption during the copy operation.
copy_vmcs12_to_shadow is safe from this issue as it is executed by
vmx_vcpu_run when preemption is already disabled before vmentry.

This bug is exposed by running Jailhouse within KVM on CPUs with
shadow VMCS support.  Jailhouse never expects an interrupt pending
vmexit, but the bug can cause it if, after copy_shadow_to_vmcs12
is preempted, the active VMCS happens to have the virtual interrupt
pending flag set in the CPU-based execution controls.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      282da870
    • N
      KVM: x86: Fix far-jump to non-canonical check · 7e46dddd
      由 Nadav Amit 提交于 
      Commit d1442d85 ("KVM: x86: Handle errors when RIP is set during far
jumps") introduced a bug that caused the fix to be incomplete.  Due to
incorrect evaluation, far jump to segment with L bit cleared (i.e., 32-bit
segment) and RIP with any of the high bits set (i.e, RIP[63:32] != 0) set may
not trigger #GP.  As we know, this imposes a security problem.

In addition, the condition for two warnings was incorrect.

Fixes: d1442d85Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
[Add #ifdef CONFIG_X86_64 to avoid complaints of undefined behavior. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      7e46dddd
    • J
      x86, kaslr: Prevent .bss from overlaping initrd · e6023367
      由 Junjie Mao 提交于 
      When choosing a random address, the current implementation does not take into
account the reversed space for .bss and .brk sections. Thus the relocated kernel
may overlap other components in memory. Here is an example of the overlap from a
x86_64 kernel in qemu (the ranges of physical addresses are presented):

 Physical Address

    0x0fe00000                  --+--------------------+  <-- randomized base
                               /  |  relocated kernel  |
                   vmlinux.bin    | (from vmlinux.bin) |
    0x1336d000    (an ELF file)   +--------------------+--
                               \  |                    |  \
    0x1376d870                  --+--------------------+   |
                                  |    relocs table    |   |
    0x13c1c2a8                    +--------------------+   .bss and .brk
                                  |                    |   |
    0x13ce6000                    +--------------------+   |
                                  |                    |  /
    0x13f77000                    |       initrd       |--
                                  |                    |
    0x13fef374                    +--------------------+

The initrd image will then be overwritten by the memset during early
initialization:

[    1.655204] Unpacking initramfs...
[    1.662831] Initramfs unpacking failed: junk in compressed archive

This patch prevents the above situation by requiring a larger space when looking
for a random kernel base, so that existing logic can effectively avoids the
overlap.

[kees: switched to perl to avoid hex translation pain in mawk vs gawk]
[kees: calculated overlap without relocs table]

Fixes: 82fa9637 ("x86, kaslr: Select random position from e820 maps")
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJunjie Mao <eternal.n08@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1414762838-13067-1-git-send-email-eternal.n08@gmail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      e6023367
    • B
      x86, microcode, AMD: Fix early ucode loading on 32-bit · 4750a0d1
      由 Borislav Petkov 提交于 
      Konrad triggered the following splat below in a 32-bit guest on an AMD
box. As it turns out, in save_microcode_in_initrd_amd() we're using the
*physical* address of the container *after* we have enabled paging and
thus we #PF in load_microcode_amd() when trying to access the microcode
container in the ramdisk range.

Because the ramdisk is exactly there:

[    0.000000] RAMDISK: [mem 0x35e04000-0x36ef9fff]

and we fault at 0x35e04304.

And since this guest doesn't relocate the ramdisk, we don't do the
computation which will give us the correct virtual address and we end up
with the PA.

So, we should actually be using virtual addresses on 32-bit too by the
time we're freeing the initrd. Do that then!

Unpacking initramfs...
BUG: unable to handle kernel paging request at 35d4e304
IP: [<c042e905>] load_microcode_amd+0x25/0x4a0
*pde = 00000000
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.1-302.fc21.i686 #1
Hardware name: Xen HVM domU, BIOS 4.4.1 10/01/2014
task: f5098000 ti: f50d0000 task.ti: f50d0000
EIP: 0060:[<c042e905>] EFLAGS: 00010246 CPU: 0
EIP is at load_microcode_amd+0x25/0x4a0
EAX: 00000000 EBX: f6e9ec4c ECX: 00001ec4 EDX: 00000000
ESI: f5d4e000 EDI: 35d4e2fc EBP: f50d1ed0 ESP: f50d1e94
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 35d4e304 CR3: 00e33000 CR4: 000406d0
Stack:
 00000000 00000000 f50d1ebc f50d1ec4 f5d4e000 c0d7735a f50d1ed0 15a3d17f
 f50d1ec4 00600f20 00001ec4 bfb83203 f6e9ec4c f5d4e000 c0d7735a f50d1ed8
 c0d80861 f50d1ee0 c0d80429 f50d1ef0 c0d889a9 f5d4e000 c0000000 f50d1f04
Call Trace:
? unpack_to_rootfs
? unpack_to_rootfs
save_microcode_in_initrd_amd
save_microcode_in_initrd
free_initrd_mem
populate_rootfs
? unpack_to_rootfs
do_one_initcall
? unpack_to_rootfs
? repair_env_string
? proc_mkdir
kernel_init_freeable
kernel_init
ret_from_kernel_thread
? rest_init
Reported-and-tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=1158204
Fixes: 75a1ba5b ("x86, microcode, AMD: Unify valid container checks")
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # v3.14+
Link: http://lkml.kernel.org/r/20141101100100.GA4462@pd.tnicSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      4750a0d1
  25. 01 11月, 2014 1 次提交
    • A
      x86_64, entry: Fix out of bounds read on sysenter · 653bc77a
      由 Andy Lutomirski 提交于 
      Rusty noticed a Really Bad Bug (tm) in my NT fix.  The entry code
reads out of bounds, causing the NT fix to be unreliable.  But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.

Excerpt from the crash:

[    1.129513] RSP: 0018:ffff88001da4bf88  EFLAGS: 00010296

  2b:*    f7 84 24 90 00 00 00     testl  $0x4000,0x90(%rsp)

That read is deterministically above the top of the stack.  I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.

Fixes: 8c7aa698 ("x86_64, entry: Filter RFLAGS.NT on entry from userspace")
Reported-by: NRusty Russell <rusty@ozlabs.org>
Cc: stable@vger.kernel.org
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      653bc77a
  27. 29 10月, 2014 7 次提交
    • P
      KVM: emulator: fix execution close to the segment limit · fd56e154
      由 Paolo Bonzini 提交于 
      Emulation of code that is 14 bytes to the segment limit or closer
(e.g. RIP = 0xFFFFFFF2 after reset) is broken because we try to read as
many as 15 bytes from the beginning of the instruction, and __linearize
fails when the passed (address, size) pair reaches out of the segment.

To fix this, let __linearize return the maximum accessible size (clamped
to 2^32-1) for usage in __do_insn_fetch_bytes, and avoid the limit check
by passing zero for the desired size.

For expand-down segments, __linearize is performing a redundant check.
(u32)(addr.ea + size - 1) <= lim can only happen if addr.ea is close
to 4GB; in this case, addr.ea + size - 1 will also fail the check against
the upper bound of the segment (which is provided by the D/B bit).
After eliminating the redundant check, it is simple to compute
the *max_size for expand-down segments too.

Now that the limit check is done in __do_insn_fetch_bytes, we want
to inject a general protection fault there if size < op_size (like
__linearize would have done), instead of just aborting.

This fixes booting Tiano Core from emulated flash with EPT disabled.

Cc: stable@vger.kernel.org
Fixes: 719d5a9bReported-by: NBorislav Petkov <bp@suse.de>
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      fd56e154
    • P
      KVM: emulator: fix error code for __linearize · 3606189f
      由 Paolo Bonzini 提交于 
      The error code for #GP and #SS is zero when the segment is used to
access an operand or an instruction.  It is only non-zero when
a segment register is being loaded; for limit checks this means
cases such as:

* for #GP, when RIP is beyond the limit on a far call (before the first
instruction is executed).  We do not implement this check, but it
would be in em_jmp_far/em_call_far.

* for #SS, if the new stack overflows during an inter-privilege-level
call to a non-conforming code segment.  We do not implement stack
switching at all.

So use an error code of zero.
Reviewed-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      3606189f
    • I
      perf/x86/intel: Revert incomplete and undocumented Broadwell client support · 1776b106
      由 Ingo Molnar 提交于 
      These patches:

  86a349a2 ("perf/x86/intel: Add Broadwell core support")
  c46e665f ("perf/x86: Add INST_RETIRED.ALL workarounds")
  fdda3c4a ("perf/x86/intel: Use Broadwell cache event list for Haswell")

introduced magic constants and unexplained changes:

  https://lkml.org/lkml/2014/10/28/1128
  https://lkml.org/lkml/2014/10/27/325
  https://lkml.org/lkml/2014/8/27/546
  https://lkml.org/lkml/2014/10/28/546

Peter Zijlstra has attempted to help out, to clean up the mess:

  https://lkml.org/lkml/2014/10/28/543

But has not received helpful and constructive replies which makes
me doubt wether it can all be finished in time until v3.18 is
released.

Despite various review feedback the author (Andi Kleen) has answered
only few of the review questions and has generally been uncooperative,
only giving replies when prompted repeatedly, and only giving minimal
answers instead of constructively explaining and helping along the effort.

That kind of behavior is not acceptable.

There's also a boot crash on Intel E5-1630 v3 CPUs reported for another
commit from Andi Kleen:

  e735b9db ("perf/x86/intel/uncore: Add Haswell-EP uncore support")

  https://lkml.org/lkml/2014/10/22/730

Which is not yet resolved. The uncore driver is independent in theory,
but the crash makes me worry about how well all these patches were
tested and makes me uneasy about the level of interminging that the
Broadwell and Haswell code has received by the commits above.

As a first step to resolve the mess revert the Broadwell client commits
back to the v3.17 version, before we run out of time and problematic
code hits a stable upstream kernel.

( If the Haswell-EP crash is not resolved via a simple fix then we'll have
  to revert the Haswell-EP uncore driver as well. )

The Broadwell client series has to be submitted in a clean fashion, with
single, well documented changes per patch. If they are submitted in time
and are accepted during review then they can possibly go into v3.19 but
will need additional scrutiny due to the rocky history of this patch set.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1776b106
    • D
      x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE · d1cd1210
      由 Dexuan Cui 提交于 
      pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long <<
PAGE_SHIFT" will overflow for PFNs above 4GB.

Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V,
with 5GB memory assigned, can't load the netvsc driver successfully and
hence the synthetic network device can't work (we can use the kernel parameter
mem=3000M to work around the issue).

Cast pte_pfn() to phys_addr_t before shifting.

Fixes: "commit d7656534: x86, mm: Create slow_virt_to_phys()"
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: linux-mm@kvack.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: jasowang@redhat.com
Cc: dave.hansen@intel.com
Cc: riel@redhat.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      d1cd1210
    • J
      ACPI, irq, x86: Return IRQ instead of GSI in mp_register_gsi() · b77e8f43
      由 Jiang Liu 提交于 
      Function mp_register_gsi() returns blindly the GSI number for the ACPI
SCI interrupt. That causes a regression when the GSI for ACPI SCI is
shared with other devices.

The regression was caused by commit 84245af7 "x86, irq, ACPI:
Change __acpi_register_gsi to return IRQ number instead of GSI" and
exposed on a SuperMicro system, which shares one GSI between ACPI SCI
and PCI device, with following failure:

http://sourceforge.net/p/linux1394/mailman/linux1394-user/?viewmonth=201410
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low
level)
[    2.699224] firewire_ohci 0000:06:00.0: failed to allocate interrupt
20

Return mp_map_gsi_to_irq(gsi, 0) instead of the GSI number.
Reported-and-Tested-by: NDaniel Robbins <drobbins@funtoo.org>
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: <stable@vger.kernel.org> # 3.17
Link: http://lkml.kernel.org/r/1414387308-27148-4-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      b77e8f43
    • J
      x86, intel-mid: Create IRQs for APB timers and RTC timers · f1829859
      由 Jiang Liu 提交于 
      Intel MID platforms has no legacy interrupts, so no IRQ descriptors
preallocated. We need to call mp_map_gsi_to_irq() to create IRQ
descriptors for APB timers and RTC timers, otherwise it may cause
invalid memory access as:
[    0.116839] BUG: unable to handle kernel NULL pointer dereference at
0000003a
[    0.123803] IP: [<c1071c0e>] setup_irq+0xf/0x4d
Tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: <stable@vger.kernel.org> # 3.17
Link: http://lkml.kernel.org/r/1414387308-27148-3-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      f1829859
    • D
      x86: Don't enable F00F workaround on Intel Quark processors · d4e1a0af
      由 Dave Jones 提交于 
      The Intel Quark processor is a part of family 5, but does not have the
F00F bug present in Pentiums of the same family.

Pentiums were models 0 through 8, Quark is model 9.
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Link: http://lkml.kernel.org/r/20141028175753.GA12743@redhat.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      d4e1a0af
  29. 28 10月, 2014 5 次提交
  31. 25 10月, 2014 1 次提交
  33. 24 10月, 2014 5 次提交