- 22 7月, 2009 6 次提交
-
-
由 Eric Paris 提交于
fsnotify drops new events when they are the same as the tail event on the queue to be sent to userspace. The problem is that if the event comes with a path we forget to break out of the switch statement and fall into the code path which matches on events that do not have any type of file backed information (things like IN_UNMOUNT and IN_Q_OVERFLOW). The problem is that this code thinks all such events should be dropped. Fix is to add a break. Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
inotify drops events if the last event on the queue is the same as the current event. But it does 2 things wrong. First it is comparing old->inode with new->inode. But after an event if put on the queue the ->inode is no longer allowed to be used. It's possible between the last event and this new event the inode could be reused and we would falsely match the inode's memory address between two differing events. The second problem is that when a file is removed fsnotify is passed the negative dentry for the removed object rather than the postive dentry from immediately before the removal. This mean the (broken) inotify tail drop code was matching the NULL ->inode of differing events. The fix is to check the file name which is stored with events when doing the tail drop instead of wrongly checking the address of the stored ->inode. Reported-by: NScott James Remnant <scott@ubuntu.com> Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
fsnotify doens't give the user anything. If someone chooses inotify or dnotify it should build fsnotify, if they don't select one it shouldn't be built. This patch changes fsnotify to be a def_bool=n and makes everything else select it. Also fixes the issue people complained about on lwn where gdm hung because they didn't have inotify and they didn't get the inotify build option..... Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
inotify_update_watch could leave things in a horrid state on a number of error paths. We could try to remove idr entries that didn't exist, we could send an IN_IGNORED to userspace for watches that don't exist, and a bit of other stupidity. Clean these up by doing the idr addition before we put the mark on the inode since we can clean that up on error and getting off the inode's mark list is hard. Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
inotify_add_watch had a couple of problems. The biggest being that if inotify_add_watch was called on the same inode twice (to update or change the event mask) a refence was taken on the original inode mark by fsnotify_find_mark_entry but was not being dropped at the end of the inotify_add_watch call. Thus if inotify_rm_watch was called although the mark was removed from the inode, the refcnt wouldn't hit zero and we would leak memory. Reported-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
The inotify rewrite forgot to drop the inotify watch use cound when a watch was removed. This means that a single inotify fd can only ever register a maximum of /proc/sys/fs/max_user_watches even if some of those had been freed. Signed-off-by: NEric Paris <eparis@redhat.com>
-
- 21 7月, 2009 1 次提交
-
-
由 Jeff Layton 提交于
...otherwise, we'll leak this memory if we have to reconnect (e.g. after network failure). Signed-off-by: NJeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 15 7月, 2009 2 次提交
-
-
由 Abhishek Kulkarni 提交于
Fix v9fs_vfs_readpage. The offset and size parameters to v9fs_file_readn were interchanged and hence passed incorrectly. Signed-off-by: NAbhishek Kulkarni <adkulkar@umail.iu.edu> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Casey Dahlin 提交于
In the tcp_connect_to_sock() error exit path, the socket allocated at the top of the function was not being freed. Signed-off-by: NCasey Dahlin <cdahlin@redhat.com> Signed-off-by: NDavid Teigland <teigland@redhat.com>
-
- 14 7月, 2009 1 次提交
-
-
由 dingdinghua 提交于
The function jbd2_journal_write_metadata_buffer() calls jbd_unlock_bh_state(bh_in) too early; this could potentially allow another thread to call get_write_access on the buffer head, modify the data, and dirty it, and allowing the wrong data to be written into the journal. Fortunately, if we lose this race, the only time this will actually cause filesystem corruption is if there is a system crash or other unclean shutdown of the system before the next commit can take place. Signed-off-by: Ndingdinghua <dingdinghua85@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 13 7月, 2009 7 次提交
-
-
由 Theodore Ts'o 提交于
Pavel Roskin pointed out that kmemcheck indicated that ext4_mb_store_history() was accessing uninitialized values of ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc history. Fix this by initializing the entire structure to all zeros first. Also, two fields were getting doubly initialized by the caller of ext4_mb_initialize_context, so remove them for efficiency's sake. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Peng Tao 提交于
The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not flush the journal in no_journal mode. Otherwise, running resize2fs on a mounted no_journal partition triggers the following error messages: BUG: unable to handle kernel NULL pointer dereference at 00000014 IP: [<c039d282>] _spin_lock+0x8/0x19 *pde = 00000000 Oops: 0002 [#1] SMP Signed-off-by: NPeng Tao <bergwolf@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Curt Wohlgemuth 提交于
We found a problem with buffer head reference leaks when using an ext4 partition without a journal. In particular, calls to ext4_forget() would not to a brelse() on the input buffer head, which will cause pages they belong to to not be reclaimable. Further investigation showed that all places where ext4_journal_forget() and ext4_journal_revoke() are called are subject to the same problem. The patch below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit release of the buffer head when the journal handle isn't valid. Signed-off-by: NCurt Wohlgemuth <curtw@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Li Zefan 提交于
If TRACE_INCLDUE_FILE is defined, <trace/events/TRACE_INCLUDE_FILE.h> will be included and compiled, otherwise it will be <trace/events/TRACE_SYSTEM.h> So TRACE_SYSTEM should be defined outside of #if proctection, just like TRACE_INCLUDE_FILE. Imaging this scenario: #include <trace/events/foo.h> -> TRACE_SYSTEM == foo ... #include <trace/events/bar.h> -> TRACE_SYSTEM == bar ... #define CREATE_TRACE_POINTS #include <trace/events/foo.h> -> TRACE_SYSTEM == bar !!! and then bar.h will be included and compiled. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A5A9CF1.2010007@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Heiko Carstens 提交于
git commit f67f129e "Driver core: implement uevent suppress in kobject" contains this chunk for fs/partitions/check.c: /* suppress uevent if the disk supresses it */ - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(pdev)) kobject_uevent(&pdev->kobj, KOBJ_ADD); However that should have been - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(ddev)) Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NMing Lei <tom.leiming@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Artem Bityutskiy 提交于
Fix the following warning: fs/afs/dir.c: In function 'afs_d_revalidate': fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function by marking the 'fid' variable as an uninitialized_var. The problem is that gcc doesn't always manage to work out that fid is always set on the path through the function that uses it. Cc: linux-afs@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 7月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 097041e5. Trond had a better fix, which is the parent of this one ("Fix compile error due to congestion_wait() changes") Requested-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 7月, 2009 4 次提交
-
-
commit 5404ac8e ("isofs: cleanup mount option processing") missed conversion of joliet option flag resulting in non-working Joliet support. CC: walt <w41ter@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Larry Finger 提交于
When building v2.6.31-rc2-344-g69ca06c9, the following build errors are found due to missing includes: CC [M] fs/fuse/dev.o fs/fuse/dev.c: In function ‘request_end’: fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function) ... fs/nfs/write.c: In function ‘nfs_set_page_writeback’: fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function) Signed-off-by: Larry Finger@lwfinger.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use the block layer mapping API (2.6.28). Douglas Gilbert explained SG_DXFER_TO_FROM_DEV: http://www.spinics.net/lists/linux-scsi/msg37135.html = The semantics of SG_DXFER_TO_FROM_DEV were: - copy user space buffer to kernel (LLD) buffer - do SCSI command which is assumed to be of the DATA_IN (data from device) variety. This would overwrite some or all of the kernel buffer - copy kernel (LLD) buffer back to the user space. The idea was to detect short reads by filling the original user space buffer with some marker bytes ("0xec" it would seem in this report). The "resid" value is a better way of detecting short reads but that was only added this century and requires co-operation from the LLD. = This patch changes the block layer mapping API to support this semantics. This simply adds another field to struct rq_map_data and enables __bio_copy_iov() to copy data from user space even with READ requests. It's better to add the flags field and kills null_mapped and the new from_user fields in struct rq_map_data but that approach makes it difficult to send this patch to stable trees because st and osst drivers use struct rq_map_data (they were converted to use the block layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer mapping API. zhou sf reported this regiression and tested this patch: http://www.spinics.net/lists/linux-scsi/msg37128.html http://www.spinics.net/lists/linux-scsi/msg37168.htmlReported-by: Nzhou sf <sxzzsf@gmail.com> Tested-by: Nzhou sf <sxzzsf@gmail.com> Cc: stable@kernel.org Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Commit 1faa16d2 accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 10 7月, 2009 9 次提交
-
-
由 Steve French 提交于
Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifs: when ATTR_READONLY is set, only clear write bits on non-directories On windows servers, ATTR_READONLY apparently either has no meaning or serves as some sort of queue to certain applications for unrelated behavior. This MS kbase article has details: http://support.microsoft.com/kb/326549/ Don't clear the write bits directory mode when ATTR_READONLY is set. Reported-by: pouchat@peewiki.net Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifs: remove cifsInodeInfo->inUse counter It was purported to be a refcounter of some sort, but was never used that way. It never served any purpose that wasn't served equally well by the I_NEW flag. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget Rather than allocating an inode and filling it out, have cifs_get_inode_info fill out a cifs_fattr and call cifs_iget. This means a pretty hefty reorganization of cifs_get_inode_info. For the readdir codepath, add a couple of new functions for filling out cifs_fattr's from different FindFile response infolevels. Finally, remove cifs_new_inode since there are no more callers. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls When there's an open filehandle, SET_FILE_INFO is apparently preferred over SET_PATH_INFO. Add a new variant that sets a FILE_UNIX_INFO_BASIC infolevel via SET_FILE_INFO and switch cifs_setattr_unix to use the new call when there's an open filehandle available. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO The SET_FILE_INFO variant will need to do the same thing here. Break this code out into a separate function that both variants can call. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo ...in preparation of adding a SET_FILE_INFO variant. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifs: add pid of initiating process to spnego upcall info This will allow the upcall to poke in /proc/<pid>/environ and get the value of the $KRB5CCNAME env var for the process. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 09 7月, 2009 8 次提交
-
-
由 Artem Bityutskiy 提交于
In the 'ubifs_recover_leb()' function, when we find corrupted empty space, we dump 8K starting from the offset where the last node ends. This is OK if the corrupted empty space is somewhere near that offset. But if the corruption is far at the end of the LEB, we will dump all 0xFF bytes and complitely ignore the interesting data. This is observed on a PPC ("kilauea") with NOR flash. This patch changes the behavior and teaches UBIFS to print only interesting data. I.e., now we find where corruption starts and start dumping from that offset. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: NAdrian Hunter <Adrian.Hunter@nokia.com>
-
由 Artem Bityutskiy 提交于
recovery.c has 'is_empty()' helper and it is better to use this helper instead of re-implementing it in several places. This patch does this and removes some amount of unneeded code. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: NAdrian Hunter <Adrian.Hunter@nokia.com>
-
由 Artem Bityutskiy 提交于
This patch fixes few minor things I've spotted while going through code: 1. Better document return codes 2. If 'ubifs_scan_a_node()' returns some thing we do not expect, treat this as an error. 3. Try to do recovery only when 'ubifs_scan()' returns %-EUCLEAN, not on any error. 4. If empty space starts at a non-aligned address, print a message. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: NAdrian Hunter <Adrian.Hunter@nokia.com>
-
由 Artem Bityutskiy 提交于
In case of corruptions, dump 8192 bytes instead of 4096. The largest node is 4096+ bytes, so it is better to see a node boundary, which is not always possible when only 4096 bytes are printed. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: NAdrian Hunter <Adrian.Hunter@nokia.com>
-
由 Jeff Layton 提交于
cifs: fix regression with O_EXCL creates and optimize away lookup Signed-off-by: NJeff Layton <jlayton@redhat.com> Tested-by: NShirish Pargaonkar <shirishp@gmail.com> CC: Stable Kernel <stable@kernel.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Joe Perches 提交于
Commit 5fd29d6c ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Commit 1c8542c7 replaced kmalloc() with memdup_user() in the write() function but also dropped the kfree(temp). The memdup_user() function allocates memory which is never freed. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Fix various silly problems wrt mnt_namespace.h: - exit_mnt_ns() isn't used, remove it - done that, sched.h and nsproxy.h inclusions aren't needed - mount.h inclusion was need for vfsmount_lock, but no longer - remove mnt_namespace.h inclusion from files which don't use anything from mnt_namespace.h Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 7月, 2009 1 次提交
-
-
由 Jiaying Zhang 提交于
The following test script triggers a deadlock on ext2 filesystem: while true; do quotaon /dev/hda >&/dev/null; usleep $RANDOM; done & while true; do quotaoff /dev/hda >&/dev/null; usleep $RANDOM; done & I found there is a potential deadlock between quotaon and quotaoff (or quotasync). Basically, all of quotactl operations need to be protected by dqonoff_mutex. vfs_quota_off and vfs_quota_sync also call sb->s_op->quota_write that needs to grab the i_mutex of the quota file. But in vfs_quota_on_inode (called from quotaon operation), the current code tries to grab the i_mutex of the quota file first before getting quonoff_mutex. Reverse the order in which we take locks in vfs_quota_on_inode(). Jan Kara: Changed changelog to be more readable, made lockdep happy with I_MUTEX_QUOTA. Signed-off-by: NJiaying Zhang <jiayingz@google.com> Signed-off-by: NJan Kara <jack@suse.cz>
-