Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 02 7月, 2015 2 次提交
    • L
      ACPICA: Tables: Enable both 32-bit and 64-bit FACS · c04e1fb4
      由 Lv Zheng 提交于 
      ACPICA commit f7b86f35416e3d1f71c3d816ff5075ddd33ed486

The following commit is reported to have broken s2ram on some platforms:
 Commit: 0249ed24
 ACPICA: Add option to favor 32-bit FADT addresses.
The platform reports 2 FACS tables (which is not allowed by ACPI
specification) and the new 32-bit address favor rule forces OSPMs to use
the FACS table reported via FADT's X_FIRMWARE_CTRL field.

The root cause of the reported bug might be one of the followings:
1. BIOS may favor the 64-bit firmware waking vector address when the
   version of the FACS is greater than 0 and Linux currently only supports
   resuming from the real mode, so the 64-bit firmware waking vector has
   never been set and might be invalid to BIOS while the commit enables
   higher version FACS.
2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the
   FADT while the commit doesn't set the firmware waking vector address of
   the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking
   vector address of the FACS reported by "X_FIRMWARE_CTRL".

This patch excludes the cases that can trigger the bugs caused by the root
cause 2.

There is no handshaking mechanism can be used by OSPM to tell BIOS which
FACS is currently used. Thus the FACS reported by "FIRMWARE_CTRL" may still
be used by BIOS and the 0 value of the 32-bit firmware waking vector might
trigger such failure.

This patch tries to favor 32bit FACS address in another way where both the
FACS reported by "FIRMWARE_CTRL" and the FACS reported by "X_FIRMWARE_CTRL"
are loaded so that further commit can set firmware waking vector in the
both tables to ensure we can exclude the cases that trigger the bugs caused
by the root cause 2. The exclusion is split into 2 commits as this commit
is also useful for dumping more ACPI tables, it won't get reverted when
such exclusion is no longer necessary. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/f7b86f35
Cc: 3.14.1+ <stable@vger.kernel.org> # 3.14.1+
Reported-and-tested-by: NOswald Buddenhagen <ossi@kde.org>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      c04e1fb4
    • L
      ACPICA: Hardware: Enable 64-bit firmware waking vector for selected FACS · aca2a5d3
      由 Lv Zheng 提交于 
      ACPICA commit 7aa598d711644ab0de5f70ad88f1e2de253115e4

The following commit is reported to have broken s2ram on some platforms:
 Commit: 0249ed24
 ACPICA: Add option to favor 32-bit FADT addresses.
The platform reports 2 FACS tables (which is not allowed by ACPI
specification) and the new 32-bit address favor rule forces OSPMs to use
the FACS table reported via FADT's X_FIRMWARE_CTRL field.

The root cause of the reported bug might be one of the followings:
1. BIOS may favor the 64-bit firmware waking vector address when the
   version of the FACS is greater than 0 and Linux currently only supports
   resuming from the real mode, so the 64-bit firmware waking vector has
   never been set and might be invalid to BIOS while the commit enables
   higher version FACS.
2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the
   FADT while the commit doesn't set the firmware waking vector address of
   the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking
   vector address of the FACS reported by "X_FIRMWARE_CTRL".

This patch excludes the cases that can trigger the bugs caused by the root
cause 1.

ACPI specification says:
A. 32-bit FACS address (FIRMWARE_CTRL field in FADT):
   Physical memory address of the FACS, where OSPM and firmware exchange
   control information.
   If the X_FIRMWARE_CTRL field contains a non zero value then this field
   must be zero.
   A zero value indicates that no FACS is specified by this field.
B. 64-bit FACS address (X_FIRMWARE_CTRL field in FADT):
   64bit physical memory address of the FACS.
   This field is used when the physical address of the FACS is above 4GB.
   If the FIRMWARE_CTRL field contains a non zero value then this field
   must be zero.
   A zero value indicates that no FACS is specified by this field.
Thus the 32bit and 64bit firmware waking vector should indicate completely
different resuming environment - real mode (1MB addressable) and non real
mode (4GB+ addressable) and currently Linux only supports resuming from
real mode.

This patch enables 64-bit firmware waking vector for selected FACS via new
acpi_set_firmware_waking_vectors() API so that it's up to OSPMs to
determine which resuming mode should be used by BIOS and ACPICA changes
won't trigger the bugs caused by the root cause 1. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/7aa598d7Reported-and-tested-by: NOswald Buddenhagen <ossi@kde.org>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      aca2a5d3
  3. 25 6月, 2015 1 次提交
  5. 23 6月, 2015 1 次提交
  7. 22 5月, 2015 8 次提交
  9. 13 5月, 2015 1 次提交
  11. 04 5月, 2015 1 次提交
    • W
      ACPI / PNP: add two IDs to list for PNPACPI device enumeration · 622532bb
      由 Witold Szczeponik 提交于 
      Commit eec15edb (ACPI / PNP: use device ID list for PNPACPI device
enumeration) changed the way how ACPI devices are enumerated and when
they are added to the PNP bus.

However, it broke the sound card support on (at least) a vintage
IBM ThinkPad 600E: with said commit applied, two of the necessary
"CSC01xx" devices are not added to the PNP bus and hence can not be
found during the initialization of the "snd-cs4236" module.  As a
consequence, loading "snd-cs4236" causes null pointer exceptions.
The attached patch fixes the problem end re-enables sound on the
IBM ThinkPad 600E.

Fixes: eec15edb (ACPI / PNP: use device ID list for PNPACPI device enumeration)
Signed-off-by: NWitold Szczeponik <Witold.Szczeponik@gmx.net>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      622532bb
  13. 01 5月, 2015 2 次提交
  15. 29 4月, 2015 1 次提交
  17. 24 4月, 2015 2 次提交
    • R
      ACPI / scan: Add a scan handler for PRP0001 · 7d284352
      由 Rafael J. Wysocki 提交于 
      If the special PRP0001 device ID is present in the given device's list
of ACPI/PNP IDs and the device has a valid "compatible" property in
the _DSD, it should be enumerated using the default mechanism,
unless some scan handlers match the IDs preceding PRP0001 in the
device's list of ACPI/PNP IDs.  In addition to that, no scan handlers
matching the IDs following PRP0001 in that list should be attached
to the device.

To make that happen, define a scan handler that will match PRP0001
and trigger the default enumeration for the matching devices if the
"compatible" property is present for them.

Since that requires the check for platform_id and device->handler
to be removed from acpi_default_enumeration(), move the fallback
invocation of acpi_default_enumeration() to acpi_bus_attach()
(after it's checked if there's a matching ACPI driver for the
device), which is a better place to call it, and do the platform_id
check in there too (device->handler is guaranteed to be unset at
the point where the function is looking for a matching ACPI driver).
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
      7d284352
    • R
      ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline() · 4c533c80
      由 Rafael J. Wysocki 提交于 
      acpi_scan_is_offline() may be called under the physical_node_lock
lock of the given device object's parent, so prevent lockdep from
complaining about that by annotating that instance with
SINGLE_DEPTH_NESTING.

Fixes: caa73ea1 (ACPI / hotplug / driver core: Handle containers in a special way)
Reported-and-tested-by: NXie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      4c533c80
  19. 22 4月, 2015 1 次提交
  21. 15 4月, 2015 2 次提交
    • R
      ACPICA: Store GPE register enable masks upfront · 0ee0d349
      由 Rafael J. Wysocki 提交于 
      It is reported that ACPI interrupts do not work any more on
Dell Latitude D600 after commit c50f13c6 (ACPICA: Save
current masks of enabled GPEs after enable register writes).
The problem turns out to be related to the fact that the
enable_mask and enable_for_run GPE bit masks are not in
sync (in the absence of any system suspend/resume events)
for at least one GPE register on that machine.

Address this problem by writing the enable_for_run mask into
enable_mask as soon as enable_for_run is updated instead of
doing that only after the subsequent register write has
succeeded.  For consistency, update acpi_hw_gpe_enable_write()
to store the bit mask to be written into the GPE register
in enable_mask unconditionally before the write.

Since the ACPI_GPE_SAVE_MASK flag is not necessary any more after
that, drop it along with the symbols depending on it.
Reported-and-tested-by: NJim Bos <jim876@xs4all.nl>
Fixes: c50f13c6 (ACPICA: Save current masks of enabled GPEs after enable register writes)
Cc: 3.19+ <stable@vger.kernel.org> # 3.19+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      0ee0d349
    • K
      ACPI / battery: Fix doubly added battery on system suspend · 31f7dc79
      由 Krzysztof Kozlowski 提交于 
      Commit 297d716f ("power_supply: Change ownership from driver to
core") inverted the logic in battery_notify().  As an effect already
present battery was re-added on each system suspend or hibernation.

    WARNING: CPU: 0 PID: 303 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80()
    sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0A:00/power_supply/BAT0'
    CPU: 0 PID: 303 Comm: rtcwake Not tainted 4.0.0-ARCH-02621-g07e6253af953 #48
    Call Trace:
      sysfs_create_dir_ns+0x8d/0xa0
      kobject_add_internal+0xb6/0x370
      kobject_add+0x6f/0xd0
      device_add+0x120/0x6c0
      __power_supply_register+0x145/0x290
      power_supply_register_no_ws+0x10/0x20
      sysfs_add_battery+0x84/0xc5 [battery]
      battery_notify+0x45/0x6b [battery]
      notifier_call_chain+0x4f/0x80
      __blocking_notifier_call_chain+0x4b/0x70
      blocking_notifier_call_chain+0x16/0x20
      pm_notifier_call_chain+0x1a/0x40
      pm_suspend+0x3ed/0x4e0
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-By: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      31f7dc79
  23. 14 4月, 2015 18 次提交