- 22 8月, 2015 3 次提交
-
-
由 Chao Yu 提交于
Add annotation to let us know more clearly about space utilization information of regular dentry and inline dentry. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Fan Li 提交于
In f2fs_lookup_extent_tree, et->cached_en was read and updated with only read lock held, it could cause __lookup_extent_tree within return entirely wrong extent_node, if other thread update et->cached_en just before __lookup_extent_tree return. However, there are two things about this patch that need to be noticed: 1. It does no good to arrange the order of concurrent read/write, the result would still be random in such case. 2. It's built on this assumption: the mix up of reads and writes on a single pointer would not make the pointer partially wrong at any time. Please let me know if I'm wrong, thx. Signed-off-by: NFan li <fanofcode.li@samsung.com> Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Junesung Lee 提交于
Fix typo. Signed-off-by: NJunesung Lee <junesoung412@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 21 8月, 2015 12 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds a routine which checks the block address of newly allocated nid. If an nid has already allocated by other thread due to subtle data races, it will result in filesystem corruption. So, it needs to check whether its block address was already allocated or not in prior to nid allocation as the last chance. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
We should not call unlock_new_inode when insert_inode_locked failed. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If FG_GC failed to reclaim one section, let's retry with another section from the start, since we can get anoterh good candidate. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Previously, update_inode_page is not called under f2fs_lock_op. Instead we should call with f2fs_write_inode. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If we can reuse nids as many as possible, we can mitigate producing obsolete node pages in the page cache. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If node blocks were already moved, we don't need to move them again. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
As the below comment of bio_alloc_bioset, f2fs can allocate multiple bios at the same time. So, we can't guarantee that bio is allocated all the time. " * When @bs is not NULL, if %__GFP_WAIT is set then bio_alloc will always be * able to allocate a bio. This is due to the mempool guarantees. To make this * work, callers must never allocate more than 1 bio at a time from this pool. * Callers that need to allocate more than 1 bio must always submit the * previously allocated bio for IO before attempting to allocate a new one. * Failure to do so can cause deadlocks under memory pressure. " Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch increases the number of maximum hard links for one file. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
We should avoid needless checkpoints when there is no dirty and prefree segment. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch introduces __count_free_nids/try_to_free_nids and registers them in slab shrinker for shrinking under memory pressure. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In f2fs_delete_entry, if last dirent is remove from the dentry page, we will try to punch that page since it has no valid date in it. But truncate_hole which is used for punching could fail because of no memory or IO error, if that happened, we'd better skip clearing this valid dentry page. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
I volunteer to be a dedicated reviewer of f2fs, add my email address in maintainship entry of f2fs. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 20 8月, 2015 1 次提交
-
-
由 Jaegeuk Kim 提交于
We should not write node pages when deleting orphan inodes. In order to do that, we can eaisly set POR_DOING flag earlier before entering orphan inode routine. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 15 8月, 2015 3 次提交
-
-
由 Jaegeuk Kim 提交于
If F2FS_CHECK_FS is turned off, we can get a build warning for unused variable. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In recover_orphan_inode, whenever f2fs_iget fail, we will make kernel panic, but it's not reasonable, because f2fs_iget can fail due to a lot of reasons including out of memory. So we change error handling method as below: a) when finding no entry for the orphan inode, bug_on for catching bugs; b) for other reasons, report it to caller. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If there is not enough free segment, we should not assign a new segment explicitly. Otherwise, we can run out of free segment. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 12 8月, 2015 2 次提交
-
-
由 Chao Yu 提交于
Previously, we use radix tree to index all registered page entries for atomic file, but now we only use radix tree to see whether current page is indexed or not, since the other user of radix tree is gone in commit 042b7816 ("f2fs: remove unnecessary call to invalidate inmemory pages"). So in this patch, we try to use one more efficient way: Introducing a macro ATOMIC_WRITTEN_PAGE, and setting it as page private value to indicate page indexing status. By using this way, we can save memory and lookup time. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
We run ltp testcase with f2fs and obtain a TFAIL in diotest4, the result in detail is as fallow: dio04 <<<test_start>>> tag=dio04 stime=1432278894 cmdline="diotest4" contacts="" analysis=exit <<<test_output>>> diotest4 1 TPASS : Negative Offset diotest4 2 TPASS : removed diotest4 3 TFAIL : diotest4.c:129: write allows odd count.returns 1: Success diotest4 4 TFAIL : diotest4.c:183: Odd count of read and write diotest4 5 TPASS : Read beyond the file size ...... the result of ext4 with same environment: dio04 <<<test_start>>> tag=dio04 stime=1432259643 cmdline="diotest4" contacts="" analysis=exit <<<test_output>>> diotest4 1 TPASS : Negative Offset diotest4 2 TPASS : removed diotest4 3 TPASS : Odd count of read and write diotest4 4 TPASS : Read beyond the file size ...... The reason is that when triggering DIO in f2fs, we will return zero value in ->direct_IO if writer's buffer offset, file offset and transfer size is not alignment to block size of filesystem, resulting in falling back into buffered write instead of returning -EINVAL. This patch fixes that problem by returning correct error number for above case, and removing the judgement condition in check_direct_IO to make sure the verification will be enabled for direct reader too. Besides, Jaegeuk Kim pointed out that there is expectional cases we should always make direct-io falling back into buffered write, such as dio in encrypted file. Signed-off-by: NYunlei He <heyunlei@huawei.com> [Chao Yu make small change and add detail description in commit message] Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 11 8月, 2015 1 次提交
-
-
由 Chao Yu 提交于
fill_zero can fail due to a lot of reason, but previously we do not handle its return value, so its callers such as punch_hole/f2fs_zero_range may report success, but actually can fail because of error occurs inside fill_zero. This patch fixes to report correct return value of fill_zero. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 06 8月, 2015 2 次提交
-
-
由 Chao Yu 提交于
When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Fan Li 提交于
In some cases, we only need the block address when we call f2fs_reserve_block, other fields of struct dnode_of_data aren't necessary. We can try extent cache first for such cases in order to speed up the process. Signed-off-by: NFan li <fanofcode.li@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 8月, 2015 16 次提交
-
-
由 Chao Yu 提交于
To avoid meeting garbage data in next free node block at the end of warm node chain when doing recovery, we will try to zero out that invalid block. If the device is not support discard, our way for zeroing out block is: grabbing a temporary zeroed page in meta inode, then, issue write request with this page. But, we forget to release that temporary page, so our memory usage will increase without gaining any hit ratio benefit, so it's better to free it for saving memory. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In following call path, we will pass a locked and referenced ipage pointer to get_new_data_page: - init_inode_metadata - make_empty_dir - get_new_data_page There are two exit paths in get_new_data_page when error occurs: 1) grab_cache_page fails, ipage will not be released; 2) f2fs_reserve_block fails, ipage will be released in callee. So, it's not consistent for error handling in get_new_data_page. For f2fs_reserve_block, it's not very easy to change the rule of error handling, since it's already complicated. Here we deside to choose an easy way to fix this issue: If any error occur in get_new_data_page, we will ensure releasing ipage in this function. The same issue is in f2fs_convert_inline_dir, fix that too. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Liu Xue 提交于
Replace BUG_ON with f2fs_bug_on to deal with block and segment validity check failed. Signed-off-by: NXue Liu <liuxueliu.liu@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In get_meta_page, we guarantee no failure for the returned page, but sometimes, IO error from device will incur returning an non-updated page. Then, we still use this page as updated one, exception could happen when using this kind of page. So in this condition, we'd better freeze fs by making fs readonly and and stop doing checkpoint. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Fan Li 提交于
some backing devices need pages to be stable during writeback. It doesn't matter if the page is completely overwritten or already uptodate, it needs to wait before write. Signed-off-by: NFan li <fanofcode.li@samsung.com> Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds to handle error cases in commit_inmem_pages. If an error occurs, it stops to write the pages and return the error right away. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
When there is no enough free nids in free nid cache, we will try to readahead FREE_NID_PAGES:4 nat pages into page cache of meta_inode, then, reading nat entries in nat page for adding free nids to free nid cache. But when traversing all nat pages we readaheaded in a circulation, our exit condition is not set right, one more nat page will be scanned without readaheading, resulting worse read performance. This patch fixes to read the correct number nat pages to avoid bad performance. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
If we clear inline data/dentry flag in handle_failed_inode, we will fail to decline the stat count of inline data/dentry in f2fs_evict_inode due to no flag in inode. So remove the wrong clearing. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In f2fs_ioc_start_{atomic,volatile}_write, if we failed in converting inline data, we will report error to user, but still remain atomic/volatile flag in inode, it will impact further writes for this file. Fix it. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch fixes the incorrect range (0, LONG_MAX) which is used in ranged fsync. If we use LONG_MAX as the parameter for indicating the end of file we want to synchronize, in 32-bits architecture machine, these datas after 4GB offset may not be persisted in storage after ->fsync returned. Here, we alter LONG_MAX to LLONG_MAX to fix this issue. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
When flushing comes from background, if there is no dirty page in the mapping of inode, we'd better to skip seeking dirty page from mapping for writebacking. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Tiezhu Yang 提交于
The if statement "goto continue_unlock" is exactly the same when each if condition is true that is depended on the value of both "step" and "is_cold_data(page)" are 0 or 1. That means when the value of "step" equals to "is_cold_data(page)", the if condition is true and the if statement "goto continue_unlock" appears only once, so it can be optimized to reduce the duplicated code. Signed-off-by: NTiezhu Yang <kernelpatch@126.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In handle_failed_inode, there is a potential deadlock which can happen in below call path: - f2fs_create - f2fs_lock_op down_read(cp_rwsem) - f2fs_add_link - __f2fs_add_link - init_inode_metadata - f2fs_init_security failed - truncate_blocks failed - handle_failed_inode - f2fs_truncate - truncate_blocks(..,true) - write_checkpoint - block_operations - f2fs_lock_all down_write(cp_rwsem) - f2fs_lock_op down_read(cp_rwsem) So in this path, we pass parameter to f2fs_truncate to make sure cp_rwsem in truncate_blocks will not be locked again. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In f2fs_do_collapse, region cp_rwsem covered is large, since it will be held until all blocks are left shifted, so if we try to collapse small area at the beginning of large file, checkpoint who want to grab writer's lock of cp_rwsem will be delayed for long time. In order to avoid this condition, altering to lock/unlock cp_rwsem each shift operation. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Fan Li 提交于
Add a lookup and a insertion interface for extent tree. The new lookup return the insert position and the prev/next extents closest to the offset we lookup when find no match. The new insertion uses above parameters to improve performance. There are three possible insertions after the lookup in f2fs_update_extent_tree, two of them insert parts of removed extent back to tree, since no merge happens during this process, new insertion skips the merge check in this scanario; the another insertion inserts a new extent to tree, new insertion uses prev/next extent and insert position to insert this extent directly, and save the time of searching down the tree. As long as tree remains unchanged between lookup and insertion, this would work fine. And the new lookup would be useful when add multi-blocks extent support for insertion interface. Signed-off-by: NFan li <fanofcode.li@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch changes for a caller to handle the page after its bio gets an error. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-