To make the translation table code VLAN-aware, each entry
must carry the VLAN ID which it belongs to. This patch adds
such attribute to the related TT structures.
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

My university will stop email service for alumni in january 2014, please
use my new e-mail address instead.
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Fix bogus merge conflict resolution by checking the return
values of the skb preparation routines.
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

We do not actually need to set any rx filters for the virtual batman
soft interface. However a dummy handler enables a user to set static
multicast listeners for instance.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

This is a simple batadv_tt_save_orig_buffer() refactoring
aiming to make it more generic and avoid useless casts.
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Implement batadv_tt_entries() to get the number of entries
fitting in a given amount of bytes. This computation is done
several times in the code and therefore it is useful to have
an helper function.
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

This is not used anymore with the new fragmentation, and it might
actually mess up the bonding code because find_router() assumes it
is only called once per packet.
Signed-off-by: NSimon Wunderlich <simon@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The module prints a warning when the MTU on the hard interface is too
small to transfer payload traffic without fragmentation. The required
MTU is calculated based on the encapsulation header size. If network
coding is compild into the module its header size is taken into
account as well.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

the icmp and the icmp_rr packets share the same initial
fields since they use the same code to be processed and
forwarded.

Extract the common fields and put them into a separate
struct so that future ICMP packets can be easily added
without bloating the packet definition.

However, keep the seqno field outside of the newly created
common header because future ICMP types may require a
bigger sequence number space.

This change breaks compatibility due to fields reordering
in the ICMP headers.
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

When comparing a network ordered value with a constant, it
is better to convert the constant at compile time by means
of htons() instead of converting the value at runtime using
ntohs().

This refactoring may slightly improve the code performance.

Moreover substitute __constant_htons() with htons() since
the latter increase readability and it is smart enough to be
as efficient as the former
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Acked-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>

Non-broadcast packets larger than MTU are fragmented and sent with
an encapsulating header. Up to 16 fragments are supported, which are
sent in reverse order on the wire to allow minimal memory copying when
creating fragments.
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Fragments arriving at their destination are buffered for later merge.
Merged packets are passed to the main receive function as had they never
been fragmented.

Fragments are forwarded without merging if the MTU of the outgoing
interface is smaller than the size of the merged packet.
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Remove the existing fragmentation code before adding the new version
and delete unicast.{h,c}.

batadv_unicast_send_skb() is moved to send.c and renamed to
batadv_send_skb_unicast().

fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in
the new fragmentation code.

BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the
new fragmentation code.
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

In case of a VLAN tagged frame the ethhdr pointer is
moved forward by 4 bytes so that the offset of h_proto
in struct ethhdr matches the real
h_vlan_encapsulated_proto address in the skb. While this
trickery is correct it makes the code harder to understand
and may lead to bugs in case of re-use of ethhdr for other
purposes.

This patch introduces a proto variable to make things
cleaner and easier to understand.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

batadv_tt_global_entry_free_ref uses call_rcu to schedule a
function which will only free the global entry itself.

For this reason call_rcu is useless and kfree_rcu can be
used to simplify the code.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

batadv_tt_global_add_orig is neither used nor implemented
anymore, therefore it is possible to remove its declaration
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

batadv_tt_global_add is not used anymore outside of the TT
code thanks to the TVLV implementation. It can therefore be
declared as static

Last user has been removed by 3de4e64df0f1326db7cc0ef25f5af8522850252d
("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")

Moreover make it return bool since its result can be either 0 or 1.
Reported-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Adding host information for record route is only required for ICMP
requests and replys, and should not be added to just any (future?)
packet type.
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The vis flag is not needed anymore, and since we do a compat bump we
can start with the first bit again
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

As we decreased the struct size from 26 to 24 byte, we can remove
__packed as the compiler will not add any more padding.
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Reordering the packet type numbers allows us to handle unicast
packets in a general way - even if we don't know the specific packet
type, we can still forward it. There was already code handling
this for a couple of unicast packets, and this is the more
generalized version to do that.
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Since we removed the __packed from most of the packets, we should
make sure that the offset generated by the compiler are correct for
sent/received data.
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

This is replaced by a userspace program, we don't need this
functionality to bloat the kernel.
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Client flags from bit 0 to 7 are sent over the wire.
BATADV_TT_CLIENT_TEMP is a local flag and is not supposed
to be sent to the network. Therefore it has occupy a
higher bit.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

CRC32C has to be preferred to CRC16 because of its possible
HW native support and because of the reduced collision
probability. With this change the Translation Table
component now uses CRC32C to compute the local and global
table checksum.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Instead of generating roaming specific packets the TVLV unicast API is
used to send roaming information.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Instead of generating TT specific packets the TVLV unicast API is used
to send translation table data.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The translation table meta data (version number, crc checksum, etc)
as well as the translation table diff propgated within OGMs now uses
the newly introduced tvlv infrastructure.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Create network coding container to announce network coding
capabilities (if enabled).
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Create DAT container to announce DAT capabilities (if enabled).
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Prior to this patch batman-adv read the advertised uplink bandwidth
from userspace and compressed this information into a single byte
called "gateway class".
Now the download & upload bandwidth information is sent as-is. No
userspace change is necessary since the sysfs API always allowed
to specify a bandwidth.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NSpyros Gasteratos <morfeas3000@gmail.com>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The goal is to provide the infrastructure for sending, receiving and
parsing information 'containers' while preserving backward
compatibility. TVLV (based on the commonly known Type Length Value
technique) was chosen as the format for those containers. Even if a
node does not know the tvlv type of a certain container it can simply
skip the current container and proceed with the next. Past experience
has shown features evolve over time, so a 'version' field was added
right from the start to allow differentiating between feature
variants - hence the name: T(ype) V(ersion) L(ength) V(alue).

This patch introduces the basic TVLV infrastructure:
 * register / unregister tvlv containers to be sent with each OGM
   (on primary interfaces only)
 * register / unregister callback handlers to be called upon
   finding the corresponding tvlv type in a tvlv buffer
 * unicast tvlv send / receive API calls
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NSpyros Gasteratos <morfeas3000@gmail.com>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

With this change batman-adv is breaking compatibility with
older versions and it is moving to compat-version 15.
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

batman-adv saves its table of packet handlers as a global state, so handlers
must be set up only once (and setting them up a second time will fail).

The recently-added network coding support tries to set up its handler each time
a new softif is registered, which obviously fails when more that one softif is
used (and in consequence, the softif creation fails).

Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
only once) and batadv_nc_mesh_init (which is called for each softif); in
addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
consistent.
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

When receiving or sending a packet a packet on a VLAN, the
vid has to be marked with the TAG flag in order to make any
component in batman-adv understand that the packet is coming
from a really tagged network.

This fix the Bridge Loop Avoidance behaviour which was not
able to send announces over VLAN interfaces.

Introduced by 0b1da1765fdb00ca5d53bc95c9abc70dfc9aae5b
("batman-adv: change VID semantic in the BLA code")
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.org>
Acked-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

This function is being removed, rename the reference.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Whenever the GW client mode is deselected, a DEL event has
to be sent in order to tell userspace that the current
gateway has been lost. Send the uevent on state change only
if a gateway was currently selected.
Reported-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>