- 22 7月, 2008 1 次提交
-
-
由 Gerrit Renker 提交于
This patch clamps the cscov setsockopt values to a maximum of 0xFFFF. Setsockopt values greater than 0xffff can cause an unwanted wrap-around. Further, IPv6 jumbograms are not supported (RFC 3838, 3.5), so that values greater than 0xffff are not even useful. Further changes: fixed a typo in the documentation. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Similar to... ouch, I repeat myself. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2008 2 次提交
-
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Some places, that deal with IP statistics already have where to get a struct net from, but use it directly, without declaring a separate variable on the stack. So, save this net on the stack for future IP_XXX_STATS macros. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 7月, 2008 2 次提交
-
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Some places, that deal with ICMP statistics already have where to get a struct net from, but use it directly, without declaring a separate variable on the stack. Since I will need this net soon, I declare a struct net on the stack and use it in the existing places in a separate patch not to spoil the future ones. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 7月, 2008 2 次提交
-
-
由 Pavel Emelyanov 提交于
Two special cases here - one is rxrpc - I put init_net there explicitly, since we haven't touched this part yet. The second place is in __udp4_lib_rcv - we already have a struct net there, but I have to move its initialization above to make it ready at the "drop" label. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Nothing special - all the places already have a struct sock at hands, so use the sock_net() net. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2008 1 次提交
-
-
由 Eric Dumazet 提交于
In commits 33c732c3 ([IPV4]: Add raw drops counter) and a92aa318 ([IPV6]: Add raw drops counter), Wang Chen added raw drops counter for /proc/net/raw & /proc/net/raw6 This patch adds this capability to UDP sockets too (/proc/net/udp & /proc/net/udp6). This means that 'RcvbufErrors' errors found in /proc/net/snmp can be also be examined for each udp socket. # grep Udp: /proc/net/snmp Udp: InDatagrams NoPorts InErrors OutDatagrams RcvbufErrors SndbufErrors Udp: 23971006 75 899420 16390693 146348 0 # cat /proc/net/udp sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt --- uid timeout inode ref pointer drops 75: 00000000:02CB 00000000:0000 07 00000000:00000000 00:00000000 00000000 --- 0 0 2358 2 ffff81082a538c80 0 111: 00000000:006F 00000000:0000 07 00000000:00000000 00:00000000 00000000 --- 0 0 2286 2 ffff81042dd35c80 146348 In this example, only port 111 (0x006F) was flooded by messages that user program could not read fast enough. 146348 messages were lost. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 6月, 2008 3 次提交
-
-
由 Pavel Emelyanov 提交于
Every caller already has this one. The new argument is currently unused, but this will be fixed shortly. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
They both calculate the hash chain, but currently do not have a struct net pointer, so pass one there via additional argument, all the more so their callers already have such. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Currently the chain to store a UDP socket is calculated with simple (x & (UDP_HTABLE_SIZE - 1)). But taking net into account would make this calculation a bit more complex, so moving it into a function would help. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 6月, 2008 1 次提交
-
-
由 Brian Haley 提交于
Change struct proto destroy function pointer to return void. Noticed by Al Viro. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 6月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
IPv6 UDP sockets wth IPv4 mapped address use udp_sendmsg to send the data actually. In this case ip_flush_pending_frames should be called instead of ip6_flush_pending_frames. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 02 5月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
The check for PDE->data != NULL becomes useless after the replacement of proc_net_fops_create with proc_create_data. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Plan C: we can follow the Al Viro's proposal about %n like in this patch. The same applies to udp, fib (the /proc/net/route file), rt_cache and sctp debug. This is minus ~150-200 bytes for each. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2008 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
And use %u to format port. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2008 2 次提交
-
-
由 Pavel Emelyanov 提交于
This counter is about to become per-proto-and-per-net, so we'll need two arguments to determine which cell in this "table" to work with. All the places, but proc already pass proper net to it - proc will be tuned a bit later. Some indentation with spaces in proc files is done to keep the file coding style consistent. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2008 7 次提交
-
-
由 Denis V. Lunev 提交于
Move it to udp_seq_afinfo->seq_fops as should be. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
No need to have separate never-used variable. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Replace seq_open with seq_open_net and remove udp_seq_release completely. seq_release_net will do this job just fine. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
No need to create seq_operations for each instance of 'netstat'. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
udp_proc_register/udp_proc_unregister are called with a static pointer only. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
An uppercut - do not use the pcounter on struct proto. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2008 3 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 25 3月, 2008 3 次提交
-
-
由 Denis V. Lunev 提交于
Replace all the reast of the init_net with a proper net on the socket layer. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Pass the init_net there for now. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
After the commit a91275ef ([NETNS][IPV6] udp - make proc handle the network namespace) it is now possible to make this file present in newly created namespaces. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 3月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
After this we have only udp_lib_get_port to get the port and two stubs for ipv4 and ipv6. No difference in udp and udplite except for initialized h.udp_hash member. I tried to find a graceful way to drop the only difference between udp_v4_get_port and udp_v6_get_port (i.e. the rcv_saddr comparison routine), but adding one more callback on the struct proto didn't appear such :( Maybe later. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Commits f40c81 ([NETNS][IPV4] tcp - make proc handle the network namespaces) and a91275 ([NETNS][IPV6] udp - make proc handle the network namespace) both introduced bad checks on sockets and tw buckets to belong to proper net namespace. I.e. when checking for socket to belong to given net and family the do { sk = sk_next(sk); } while (sk && sk->sk_net != net && sk->sk_family != family); constructions were used. This is wrong, since as soon as the sk->sk_net fits the net the socket is immediately returned, even if it belongs to other family. As the result four /proc/net/(udp|tcp)[6] entries show wrong info. The udp6 entry even oopses when dereferencing inet6_sk(sk) pointer: static void udp6_sock_seq_show(struct seq_file *seq, struct sock *sp, int bucket) { ... struct ipv6_pinfo *np = inet6_sk(sp); ... dest = &np->daddr; /* will be NULL for AF_INET sockets */ ... seq_printf(... dest->s6_addr32[0], dest->s6_addr32[1], dest->s6_addr32[2], dest->s6_addr32[3], ... Fix it by converting && to ||. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2008 2 次提交
-
-
由 Daniel Lezcano 提交于
The proc init/exit functions take a new network namespace parameter in order to register/unregister /proc/net/udp6 for a namespace. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
This patch makes the common udp proc functions to take care of which socket they should show taking into account the namespace it belongs. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit db1ed684 ("[IPV6] UDP: Rename IPv6 UDP files."), commit 8be8af8f ("[IPV4] UDP: Move IPv4-specific bits to other file.") and commit e898d4db ("[UDP]: Allow users to configure UDP-Lite."). First, udplite is of such small cost, and it is a core protocol just like TCP and normal UDP are. We spent enormous amounts of effort to make udplite share as much code with core UDP as possible. All of that work is less valuable if we're just going to slap a config option on udplite support. It is also causing build failures, as reported on linux-next, showing that the changeset was not tested very well. In fact, this is the second build failure resulting from the udplite change. Finally, the config options provided was a bool, instead of a modular option. Meaning the udplite code does not even get build tested by allmodconfig builds, and furthermore the user is not presented with a reasonable modular build option which is particularly needed by distribution vendors. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2008 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Move IPv4-specific UDP bits from net/ipv4/udp.c into (new) net/ipv4/udp_ipv4.c. Rename net/ipv4/udplite.c to net/ipv4/udplite_ipv4.c. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Let's give users an option for disabling UDP-Lite (~4K). old: | text data bss dec hex filename | 286498 12432 6072 305002 4a76a net/ipv4/built-in.o | 193830 8192 3204 205226 321aa net/ipv6/ipv6.o new (without UDP-Lite): | text data bss dec hex filename | 284086 12136 5432 301654 49a56 net/ipv4/built-in.o | 191835 7832 3076 202743 317f7 net/ipv6/ipv6.o Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-