- 31 10月, 2008 3 次提交
-
-
由 James Bottomley 提交于
Impact: fix /proc/cpuinfo output on x86/Voyager Ever since | commit 92cb7612 | Author: Mike Travis <travis@sgi.com> | Date: Fri Oct 19 20:35:04 2007 +0200 | | x86: convert cpuinfo_x86 array to a per_cpu array We've had an extra field in cpuinfo_x86 which is cpu_index. Unfortunately, voyager has never initialised this, although the only noticeable impact seems to be that /proc/cpuinfo shows all zeros for the processor ids. Anyway, fix this by initialising the boot CPU properly and setting the index when the secondaries update. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 James Bottomley 提交于
Impact: fix build failure on x86/Voyager Before: | commit 329513a3 | Author: Yinghai Lu <yhlu.kernel@gmail.com> | Date: Wed Jul 2 18:54:40 2008 -0700 | | x86: move prefill_possible_map calling early prefill_possible_mask() was hidden under CONFIG_HOTPLUG_CPU rendering it invisitble to voyager. Since this commit it's exposed, but not provided by the voyager subarch, so add a dummy stub to fix the link breakage. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 James Bottomley 提交于
Impact: boot up secondary CPUs as well on x86/Voyager systems This commit: | commit 3e970473 | Author: Glauber Costa <gcosta@redhat.com> | Date: Wed May 28 13:01:54 2008 -0300 | | x86: boot secondary cpus through initial_code removed the use of initialize_secondary. However, it didn't update voyager, so the secondary cpus no longer boot. Fix this by adding the initial_code switch to voyager as well. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Cc: Glauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 10月, 2008 1 次提交
-
-
由 Yinghai Lu 提交于
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 9月, 2008 1 次提交
-
-
由 Manfred Spraul 提交于
Right now, there is no notifier that is called on a new cpu, before the new cpu begins processing interrupts/softirqs. Various kernel function would need that notification, e.g. kvm works around by calling smp_call_function_single(), rcu polls cpu_online_map. The patch adds a CPU_STARTING notification. It also adds a helper function that sends the message to all cpu_chain handlers. Tested on x86-64. All other archs are untested. Especially on sparc, I'm not sure if I got it right. Signed-off-by: NManfred Spraul <manfred@colorfullife.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 6月, 2008 3 次提交
-
-
由 Jens Axboe 提交于
It's not even passed on to smp_call_function() anymore, since that was removed. So kill it. Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
It's never used and the comments refer to nonatomic and retry interchangably. So get rid of it. Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
This converts x86, x86-64, and xen to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 25 5月, 2008 2 次提交
-
-
由 Alexey Starikovskiy 提交于
-
由 Yinghai Lu 提交于
move early_res related from e820_64.c to e820.c make edba detection to be done in head32.c remove smp_alloc_memory, because we have fixed trampoline address now. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 10 files changed, 320 insertions(+), 319 deletions(-) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 4月, 2008 1 次提交
-
-
由 Akinobu Mita 提交于
cpu_online(), cpu_present(), for_each_possible_cpu(), num_possible_cpus() Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 4月, 2008 2 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Make KERNEL_PGD_PTRS common, as previously it was only being defined for 32-bit. There are a couple of follow-on changes from this: - KERNEL_PGD_PTRS was being defined in terms of USER_PGD_PTRS. The definition of USER_PGD_PTRS doesn't really make much sense on x86-64, since it can have two different user address-space configurations. I renamed USER_PGD_PTRS to KERNEL_PGD_BOUNDARY, which is meaningful for all of 32/32, 32/64 and 64/64 process configurations. - USER_PTRS_PER_PGD was also defined and was being used for similar purposes. Converting its users to KERNEL_PGD_BOUNDARY left it completely unused, and so I removed it. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Andi Kleen <ak@suse.de> Cc: Zach Amsden <zach@vmware.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Reported-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 4月, 2008 1 次提交
-
-
由 WANG Cong 提交于
Remove old comments that include the old arch/i386 directory. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 4月, 2008 4 次提交
-
-
由 Pavel Machek 提交于
Move wakeup code to .c, so that video mode setting code can be shared between boot and wakeup. Remove nasty assembly code in 64-bit case by re-using trampoline code. Stack setup was fixed to clear high 16bits of %esp, maybe that fixes some machines. .c code sharing and morse code was done H. Peter Anvin, Sam Ravnborg reviewed kbuild related stuff, and it seems okay to him. Rafael did some cleanups. [rjw: * Made the patch stop breaking compilation on x86-32 * Added arch/x86/kernel/acpi/sleep.h * Got rid of compiler warnings in arch/x86/kernel/acpi/sleep.c * Fixed 32-bit compilation on x86-64 systems * Added include/asm-x86/trampoline.h and fixed the non-SMP compilation on 64-bit x86 * Removed arch/x86/kernel/acpi/sleep_32.c which was not used * Fixed some breakage caused by the integration of smpboot.c done under us in the meantime] Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Reviewed-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
voyager would conflict with it, but the types are ultimately compatible. So remove the extern definition from voyager_smp.c in favour of the common one Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
make setup_trampoline non-static. This way, it won't conflict with the extern declaration in smp.h Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
Change voyager's trampoline base to unsigned char * instead of u32. This way, it won't conflict with the other architectures when including smp.h Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 07 2月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
calibrate_delay() must be __cpuinit, not __{dev,}init. I've verified that this is correct for all users. While doing the latter, I also did the following cleanups: - remove pointless additional prototypes in C files - ensure all users #include <linux/delay.h> This fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder') WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map') Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Zankel <chris@zankel.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2008 6 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Avoid a conflict between Voyager's leave_mm and asm-x86/mmu.h's leave_mm. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
fastcall is always defined to be empty, remove it from arch/x86 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 H. Peter Anvin 提交于
We have a lot of code which differs only by the naming of specific members of structures that contain registers. In order to enable additional unifications, this patch drops the e- or r- size prefix from the register names in struct pt_regs, and drops the x- prefixes for segment registers on the 32-bit side. This patch also performs the equivalent renames in some additional places that might be candidates for unification in the future. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Bring the tlbflush.h variants into sync to prepare merging and paravirt support. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
lindent the mach-voyager files to get rid of more than 300 style errors: errors lines of code errors/KLOC arch/x86/mach-voyager/ [old] 409 3729 109.6 arch/x86/mach-voyager/ [new] 71 3678 19.3 Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 11月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
Fix Voyager section mismatch due to using __devinit instead of __cpuinit. WARNING: vmlinux.o(.text+0xd943): Section mismatch: reference to .init.text:init_gdt (between 'voyager_smp_prepare_boot_cpu' and 'smp_vic_cmn_interrupt') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 28 10月, 2007 1 次提交
-
-
由 James Bottomley 提交于
There were two problems. Firstly, someone forgot the struct keyword in front of cpuinfo_x86, so I take it this wasn't even compile checked. Secondly, the actual definition has this as a SHARED_ALIGNED, so the definitions mismatch. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 20 10月, 2007 2 次提交
-
-
由 Simon Arlott 提交于
Spelling fixes in arch/i386/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Mike Travis 提交于
cpu_data is currently an array defined using NR_CPUS. This means that we overallocate since we will rarely really use maximum configured cpus. When NR_CPU count is raised to 4096 the size of cpu_data becomes 3,145,728 bytes. These changes were adopted from the sparc64 (and ia64) code. An additional field was added to cpuinfo_x86 to be a non-ambiguous cpu index. This corresponds to the index into a cpumask_t as well as the per_cpu index. It's used in various places like show_cpuinfo(). cpu_data is defined to be the boot_cpu_data structure for the NON-SMP case. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 10月, 2007 2 次提交
-
-
由 Joe Korty 提交于
Add missing IRQs and IRQ descriptions to /proc/interrupts. /proc/interrupts is most useful when it displays every IRQ vector in use by the system, not just those somebody thought would be interesting. This patch inserts the following vector displays to the i386 and x86_64 platforms, as appropriate: rescheduling interrupts TLB flush interrupts function call interrupts thermal event interrupts threshold interrupts spurious interrupts A threshold interrupt occurs when ECC memory correction is occuring at too high a frequency. Thresholds are used by the ECC hardware as occasional ECC failures are part of normal operation, but long sequences of ECC failures usually indicate a memory chip that is about to fail. Thermal event interrupts occur when a temperature threshold has been exceeded for some CPU chip. IIRC, a thermal interrupt is also generated when the temperature drops back to a normal level. A spurious interrupt is an interrupt that was raised then lowered by the device before it could be fully processed by the APIC. Hence the apic sees the interrupt but does not know what device it came from. For this case the APIC hardware will assume a vector of 0xff. Rescheduling, call, and TLB flush interrupts are sent from one CPU to another per the needs of the OS. Typically, their statistics would be used to discover if an interrupt flood of the given type has been occuring. AK: merged v2 and v4 which had some more tweaks AK: replace Local interrupts with Local timer interrupts AK: Fixed description of interrupt types. [ tglx: arch/x86 adaptation ] [ mingo: small cleanup ] Signed-off-by: NJoe Korty <joe.korty@ccur.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Tim Hockin <thockin@hockin.org> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Beulich 提交于
Miscellaneous x86 stuff that can live in .rodata. [ tglx: arch/x86 adaptation ] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 5月, 2007 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
This adds an smp_ops for voyager, and hooks things up appropriately. This is the first baby-step to making subarch runtime switchable. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 2 次提交
-
-
由 Rusty Russell 提交于
Now we are no longer dynamically allocating the GDT, we don't need the "cpu_gdt_table" at all: we can switch straight from "boot_gdt_table" to the per-cpu GDT. This means initializing the cpu_gdt array in C. The boot CPU uses the per-cpu var directly, then in smp_prepare_cpus() it switches to the per-cpu copy just allocated. For secondary CPUs, the early_gdt_descr is set to point directly to their per-cpu copy. For UP the code is very simple: it keeps using the "per-cpu" GDT as per SMP, but we never have to move. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Rusty Russell 提交于
Allocating PDA and GDT at boot is a pain. Using simple per-cpu variables adds happiness (although we need the GDT page-aligned for Xen, which we do in a followup patch). [akpm@linux-foundation.org: build fix] Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 01 5月, 2007 3 次提交
-
-
由 James Bottomley 提交于
It's about time voyager had them Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Eric W. Biederman 提交于
This is a trivial and hopefully obviously correct patch to setup and teardown the identity mappings the way the rest of arch/i386 does. My new page table setup code will break some assumptions below so this is my attempt to keep voyager working. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Bottomley 提交于
This apparently has msr users now, so add it to the voyager HAL Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 23 1月, 2007 1 次提交
-
-
由 James Bottomley 提交于
The current PDA code, which went in in post 2.6.19 has a flaw in that it doesn't correctly cycle the GDT and %GS segment through the boot PDA, the CPU PDA and finally the per-cpu PDA. The bug generally doesn't show up if the boot CPU id is zero, but everything falls apart for a non zero boot CPU id. The basically kills voyager which is perfectly capable of doing non zero CPU id boots, so voyager currently won't boot without this. The fix is to be careful and actually do the GDT setups correctly. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-