Introduce multiple hardware queues to improve legacy I/O path performance.
Each hardware queue is comprised of a master context and associated I/O
resources. The hardware queues are initially implemented as a static array
embedded in the AFU. This will be transitioned to a dynamic allocation in a
later series to improve the memory footprint of the driver.
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The method used to decode asynchronous interrupts involves unnecessary loops
to match up bits that are set with corresponding entries in the asynchronous
interrupt information table. This algorithm is wasteful and does not scale
well as new status bits are supported.

As an improvement, use the for_each_set_bit() service to iterate over the
asynchronous status bits and refactor the information table such that it can
be indexed by bit position.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As a general cleanup, address all reasonable checkpatch warnings and
errors. These include enforcement of comment styles and including named
identifiers in function prototypes.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Validation statements to enforce assumptions about specific defines are not
being evaluated by the compiler due to the fact that they reside in a routine
that is not used. To activate them, call the routine as part of module
initialization. As an additional, related cleanup, remove the now-defunct
CXLFLASH_NUM_CMDS.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Devices supported by the cxlflash driver are fully coherent and do not require
a bus address mapping. Avoid unnecessary path length by using the virtual
address and length already present in the scatter-gather entry.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

An EEH during probe can lead to a crash as the recovery thread races with the
probe thread. To avoid this issue, introduce new states to fence out EEH
recovery until probe has completed. Also ensure the reset wait queue is
flushed during device removal to avoid orphaned threads.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the driver to allow for future cards with 4 ports.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the SISlite header to support 4 ports as outlined in the SISlite
specification. Address fallout from structure renames and refreshed
organization throughout the driver. Determine the number of ports supported by
a card from the global port selection mask register reset value.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As staging to support FC-related updates to the SISlite specification,
introduce helper routines to obtain references to FC resources that exist
within the global map. This will allow changes to the underlying global map
structure without impacting existing code paths.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

At present, the cxlflash driver only supports hardware with two FC ports. The
code was initially designed with this assumption and is dependent on having
two FC ports - adding more ports will break logic within the driver.

To mitigate this issue, remove the existing port assumptions and transition
the code to support more than two ports. As a side effect, clarify the
interpretation of the DK_CXLFLASH_ALL_PORTS_ACTIVE flag.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Transition from a static number of FC ports to a value that is derived during
probe. For now, a static value is used but this will later be based on the
type of card being configured.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As staging for future function, pass the config pointer instead of the AFU
pointer for port-related sysfs helper routines.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, RRQ processing takes place on hardware interrupt context. This can
be a heavy burden in some environments due to the overhead encountered while
completing RRQ entries. In an effort to improve system performance, use the
IRQ polling API to schedule this processing on softirq context.

This function will be disabled by default until starting values can be
established for the hardware supported by this driver.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As further staging to support processing the HRRQ by other means, access to
the HRRQ needs to be serialized by a disabled lock. This will allow safe
access in other non-hardware interrupt contexts. In an effort to minimize the
period where interrupts are disabled, support is added to queue up commands
harvested from the RRQ such that they can be processed with hardware
interrupts enabled. While this doesn't offer any improvement with processing
on a hardware interrupt it will help when IRQ polling is supported and the
command completions can execute on softirq context.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In order to support processing the HRRQ by other means (e.g. polling), the
processing portion of the current RRQ interrupt handler needs to be broken out
into a separate routine. This will allow RRQ processing from places other than
the RRQ hardware interrupt handler.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All but one caller want the decoded sense header, so offer the existing
__scsi_execute helper as the public scsi_execute API to simply the
callers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add support for a future IBM Coherent Accelerator (CXL) flash AFU with
an ID of 0x0624.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When processing an AFU asynchronous interrupt, if the action results in an
operation that requires off level processing (a link reset for example),
the worker thread is scheduled. In the meantime a reset event (i.e.: EEH)
could unmap the AFU to recover. This results in an Oops when the worker
thread tries to access the AFU mapping.

[c000000f17e03b90] d000000007cd5978 cxlflash_worker_thread+0x268/0x550
[c000000f17e03c40] c00000000011883c process_one_work+0x1dc/0x680
[c000000f17e03ce0] c000000000118e80 worker_thread+0x1a0/0x520
[c000000f17e03d80] c000000000126174 kthread+0xf4/0x100
[c000000f17e03e30] c00000000000a47c ret_from_kernel_thread+0x5c/0xe0

In an effort to avoid this, a mapcount was introduced in
commit b45cdbaf ("cxlflash: Resolve oops in wait_port_offline")
but due to the race condition described above, this solution is incomplete.

In order to fully resolve this problem and to simplify things, this commit
removes the mapcount solution. Instead, the scheduled worker thread is
cancelled after interrupts have been disabled and prior to the mapping
being freed.

Fixes: b45cdbaf ("cxlflash: Resolve oops in wait_port_offline")
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The usage of prints within the cxlflash driver is inconsistent. This
hinders debug and makes the driver source and log output appear sloppy.

The following cleanups help unify the prints within cxlflash:
 - move all prints to dev-* where possible
 - transition all hex prints to lowercase
 - standardize variable prints in debug output
 - derive pointers in a consistent manner
 - change int to bool where appropriate
 - remove superfluous data from prints and print statements that do not
   make sense
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The SISLite specification outlines a new queuing model to improve
over the MMIO-based IOARRIN model that exists today. This new model
uses a submission queue that exists in host memory and is shared with
the device. Each entry in the queue is an IOARCB that describes a
transfer request. When requests are submitted, IOARCBs ('current'
position tracked in host software) are populated and the submission
queue tail pointer is then updated via MMIO to make the device aware
of the requests.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As staging for supporting hardware with different context reset
registers but a similar reset procedure, refactor the existing context
reset routine to move the reset logic to a common routine. This will
allow hardware with a different reset register to leverage existing
code.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, when sending a SCSI command, the pointer is stored in a
reserved field of the AFU command descriptor for retrieval once the
SCSI command has completed. In order to support new descriptor formats
that make use of the reserved field, the pointer is migrated to outside
the descriptor where it can still be found during completion processing.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As staging for supporting hardware with a different queuing mechanism,
move the send_cmd() and context_reset() routines to function pointers
that are configured when the AFU is initialized. In addition, rename
the existing routines to better reflect the queue model they support.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The queuecommand routine is disorganized where it populates the
private command and also contains some logic/statements that are
not needed given that cxlflash devices do not (and likely never
will) support scatter-gather.

Restructure the code to remove the unnecessary logic and create an
organized flow:

	handle state -> DMA map -> populate command -> send command
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The send_tmf() routine includes some copy/paste cruft that can be
removed as well as the setting of an AFU command-specific while
holding the tmf_slock. While not a bug, it is out of place and
should be shifted down alongside the other command initialization
statements for clarity.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The original design of the cxlflash driver required AFU commands
to convey state information across multiple threads. The IOASA
"host use" byte was used to track if a command was done, errored,
or timed out. A per-command spin lock was used to serialize access
to this byte. As this is no longer required with the introduction
of completions and various refactoring over time, the spin lock,
state tracking, and associated code can be removed. To support the
simplification, the wait_resp() routine is refactored to return a
success or failure. Additionally, as the simplification to the
AFU internal command routine, explicit assignments of AFU command
fields to zero are removed as the memory is zeroed upon allocation.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

With the removal of the static private command pool, the ability to
'complete' outstanding commands was lost. While not an issue for the
commands originating outside the driver, internal AFU commands are
synchronous and therefore have a timeout associated with them. To
avoid a stale memory access, the tear down sequence needs to ensure
that there are not any active commands before proceeding. As these
internal AFU commands are rare events, the simplest way to accomplish
this is detecting the activity and waiting for it to timeout.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clean up and remove the remaining private command pool infrastructure
that is no longer required.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Instead of using a private pool of AFU commands, use cmd_size to prime
the private pool of SCSI commands such that they are allocated with a
size large enough to contain an aligned AFU command. Use scsi_cmd_priv()
to derive the aligned/zeroed private command on queuecommand and TMF
paths. Remove cmd_checkout() as it is no longer required. The remaining
AFU private command infrastructure will be removed in a cleanup commit.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As staging for the removal of the AFU command pool, remove the reliance
upon the pool for the internal AFU sync command. Instead of obtaining an
AFU command from the pool, dynamically allocate memory with the appropriate
alignment requirements. Since the AFU sync service is only executed from
the process environment, blocking is acceptable.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The cxlflash driver originally required a per-command 4K buffer that
hosted data passed to the AFU. When the routines that initiate AFU
and internal SCSI commands were refactored to use scsi_execute(), the
need for this buffer became obsolete. As it is no longer necessary,
the buffer is removed.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During test, a command room violation interrupt is occasionally seen
for the master context when the CXL flash devices are stressed.

After studying the code, there could be gaps in the way command room
value is being cached in cxlflash. When the cached command room is zero
the thread attempting to send becomes burdened with updating the cached
value with the actual value from the AFU. Today, this is handled with an
atomic set operation of the raw value read. Following the atomic update,
the thread proceeds to send.

This behavior is incorrect on two counts:

   - The update fails to take into account the current thread and its
     consumption of one of the hardware commands.

   - The update does not take into account other threads also atomically
     updating. Per design, a worker thread updates the cached value when a
     send thread times out. By not protecting the update with a lock, the
     cached value can be incorrectly clobbered.

To correct these issues, the update of the cached command room has been
simplified and also protected using a spin lock which is held until the
MMIO is complete. This ensures the command room is properly consumed by
the same thread. Update of cached value also takes into account the
current thread consuming a hardware command.
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, the context reset routine waits for command room to
be available before sending the reset request. Per review of the
SISLite specification and clarifications from the CXL Flash AFU
designers, this wait is unnecessary. The reset request can be
sent anytime regardless of command room, so long as only a single
reset request is active at any one point in time.

This commit simplifies the reset routine by removing the wait for
command room. Additionally it adds a debug trace to help pinpoint
hardware errors when a context reset does not complete.
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During test, the following crash was observed:

[34538.981505] Faulting instruction address: 0xd000000007c9c870
cpu 0x9: Vector: 300 (Data Access) at [c0000007f1e8f590]
    pc: d000000007c9c870: cxlflash_restore_luntable+0x70/0x1d0 [cxlflash]
    lr: d000000007c9c84c: cxlflash_restore_luntable+0x4c/0x1d0 [cxlflash]
    sp: c0000007f1e8f810
   msr: 9000000100009033
   dar: c00000171d637438
 dsisr: 40000000
  current = 0xc0000007f1e43f90
  paca    = 0xc000000007b25100   softe: 0        irq_happened: 0x01
    pid   = 493, comm = eehd
enter ? for help
[c0000007f1e8f8a0] d000000007c940b0 init_afu+0xd60/0x1200 [cxlflash]
[c0000007f1e8f9a0] d000000007c945a8 cxlflash_pci_slot_reset+0x58/0xe0 [cxlflash]
[c0000007f1e8fa20] d00000000715f790 cxl_pci_slot_reset+0x230/0x340 [cxl]
[c0000007f1e8fae0] c000000000040dd4 eeh_report_reset+0x144/0x180
[c0000007f1e8fb20] c00000000003f708 eeh_pe_dev_traverse+0x98/0x170
[c0000007f1e8fbb0] c000000000041618 eeh_handle_normal_event+0x328/0x410
[c0000007f1e8fc30] c000000000041db8 eeh_handle_event+0x178/0x330
[c0000007f1e8fce0] c000000000042118 eeh_event_handler+0x1a8/0x1b0
[c0000007f1e8fd80] c00000000011420c kthread+0xec/0x100
[c0000007f1e8fe30] c00000000000a47c ret_from_kernel_thread+0x5c/0xe0

When superpipe mode is disabled for a LUN, the references for the
local lun are deleted but the LUN is still identified as being present
in the LUN table. This mismatched state can result in the above crash
when the LUN table is restored during an error recovery operation.

To fix this issue, the local LUN information structure is updated to
reflect the LUN is no longer in the LUN table once all references to
the LUN are gone.
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The following Oops is encountered when blk_mq is enabled with the
cxlflash driver:

[ 2960.817172] Oops: Kernel access of bad area, sig: 11 [#5]
[ 2960.817309] NIP  __blk_mq_run_hw_queue+0x278/0x4c0
[ 2960.817313] LR __blk_mq_run_hw_queue+0x2bc/0x4c0
[ 2960.817314] Call Trace:
[ 2960.817320] __blk_mq_run_hw_queue+0x2bc/0x4c0 (unreliable)
[ 2960.817324] blk_mq_run_hw_queue+0xd8/0x100
[ 2960.817329] blk_mq_insert_requests+0x14c/0x1f0
[ 2960.817333] blk_mq_flush_plug_list+0x150/0x190
[ 2960.817338] blk_flush_plug_list+0x11c/0x2b0
[ 2960.817344] blk_finish_plug+0x58/0x80
[ 2960.817348] __do_page_cache_readahead+0x1c0/0x2e0
[ 2960.817352] force_page_cache_readahead+0x68/0xd0
[ 2960.817356] generic_file_read_iter+0x43c/0x6a0
[ 2960.817359] blkdev_read_iter+0x68/0xa0
[ 2960.817361] __vfs_read+0x11c/0x180
[ 2960.817364] vfs_read+0xa4/0x1c0
[ 2960.817366] SyS_read+0x6c/0x110
[ 2960.817369] system_call+0x38/0xb4

The SCSI blk_mq stack assumes that sg_tablesize is always a non-zero
value with scsi_mq_setup_tags() allocating tags using sg_tablesize.
The cxlflash driver currently uses SG_NONE (0) for the sg_tablesize
as the devices it supports are not capable of scatter gather. This
mismatch of values results in the Oops above.

To resolve this issue, sg_tablesize for cxlflash can simply be set
to 1, a value which satisfies the constraints in cxlflash and the
lack of support of SG_NONE in SCSI blk_mq.
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit 888baf06 ("scsi: cxlflash: Add kref to context") introduced a
kref to the context. In particular, the detach routine was updated to
use the kref services for managing the removal and destruction of a
context.

As part of this change, the tracking mechanism internal to the detach
handler was refactored. This introduced a bug that can cause the
tracking state to be lost. This can lead to a situation where exclusive
access to a context is prematurely [and unknowingly] relinquished for
the executing thread.

To remedy, only update the tracking state when the kref operation
indicates the context was removed.

Fixes: 888baf06 ("scsi: cxlflash: Add kref to context")
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit 964497b3 ("cxlflash: Remove dual port online dependency")
logically removed the ability for the WWPN setup routine afu_set_wwpn()
to return a non-success value. This routine can safely be made a void to
simplify the code as there is no longer a need to report a failure.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When an EEH occurs during device initialization, the port timeout logic
can cause excessive delays as MMIO reads will fail. Depending on where
they are experienced, these delays can lead to a prolonged reset,
causing an unnecessary triggering of other timeout logic in the SCSI
stack or user applications.

To expedite recovery, the port timeout logic is updated to decay the
timeout at a much faster rate when in the presence of a likely EEH
frozen event.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The EEH reset handler is ignorant to the current state of the driver
when processing a frozen event and initiating a device reset. This can
be an issue if an EEH event occurs while a user or stack initiated reset
is executing. More specifically, if an EEH occurs while the SCSI host
reset handler is active, the reset initiated by the EEH thread will
likely collide with the host reset thread. This can leave the device in
an inconsistent state, or worse, cause a system crash.

As a remedy, the EEH handler is updated to evaluate the device state and
take appropriate action (proceed, wait, or disconnect host). The host
reset handler is also updated to handle situations where an EEH occurred
during a host reset. In such situations, the host reset handler will
delay reporting back a success to give the EEH reset an opportunity to
complete.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>