Francois reported that setting big mtu on loopback device could prevent
tcp sessions making progress.

We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets.

We must limit the IPv6 MTU to (65535 + 40) bytes in theory.

Tested:

ifconfig lo mtu 70000
netperf -H ::1

Before patch : Throughput :   0.05 Mbits

After patch : Throughput : 35484 Mbits
Reported-by: NFrancois WELLENREITER <f.wellenreiter@gmail.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"len" contains sizeof(nf_ct_ext) and size of extensions. In a worst
case it can contain all extensions. Bellow you can find sizes for all
types of extensions. Their sum is definitely bigger than 256.

nf_ct_ext_types[0]->len = 24
nf_ct_ext_types[1]->len = 32
nf_ct_ext_types[2]->len = 24
nf_ct_ext_types[3]->len = 32
nf_ct_ext_types[4]->len = 152
nf_ct_ext_types[5]->len = 2
nf_ct_ext_types[6]->len = 16
nf_ct_ext_types[7]->len = 8

I have seen "len" up to 280 and my host has crashes w/o this patch.

The right way to fix this problem is reducing the size of the ecache
extension (4) and Florian is going to do this, but these changes will
be quite large to be appropriate for a stable tree.

Fixes: 5b423f6a (netfilter: nf_conntrack: fix racy timer handling with reliable)
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Commit 9b2777d6 (ieee802154: add TX power control to wpan_phy)
and following erroneously added CSMA and CCA parameters for 802.15.4
devices as PHY parameters, while they are actually MAC parameters and
can differ for any two WPAN instances. Since it is now sensible to have
multiple WPAN devices with differing CSMA/CCA parameters, make these
parameters MAC parameters instead.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the whole rt6_need_strict as static inline into ip6_route.h,
so that it can be reused
Signed-off-by: NWang Yufen <wangyufen@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch basically does two things, i) removes the extern keyword
from the include/linux/filter.h file to be more consistent with the
rest of Joe's changes, and ii) moves filter accounting into the filter
core framework.

Filter accounting mainly done through sk_filter_{un,}charge() take
care of the case when sockets are being cloned through sk_clone_lock()
so that removal of the filter on one socket won't result in eviction
as it's still referenced by the other.

These functions actually belong to net/core/filter.c and not
include/net/sock.h as we want to keep all that in a central place.
It's also not in fast-path so uninlining them is fine and even allows
us to get rd of sk_filter_release_rcu()'s EXPORT_SYMBOL and a forward
declaration.

Joint work with Alexei Starovoitov.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

addrconf_join_solict and addrconf_join_anycast may cause actions which
need rtnl locked, especially on first address creation.

A new DAD state is introduced which defers processing of the initial
DAD processing into a workqueue.

To get rtnl lock we need to push the code paths which depend on those
calls up to workqueues, specifically addrconf_verify and the DAD
processing.

(v2)
addrconf_dad_failure needs to be queued up to the workqueue, too. This
patch introduces a new DAD state and stop the DAD processing in the
workqueue (this is because of the possible ipv6_del_addr processing
which removes the solicited multicast address from the device).

addrconf_verify_lock is removed, too. After the transition it is not
needed any more.

As we are not processing in bottom half anymore we need to be a bit more
careful about disabling bottom half out when we lock spin_locks which are also
used in bh.

Relevant backtrace:
[  541.030090] RTNL: assertion failed at net/core/dev.c (4496)
[  541.031143] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O 3.10.33-1-amd64-vyatta #1
[  541.031145] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  541.031146]  ffffffff8148a9f0 000000000000002f ffffffff813c98c1 ffff88007c4451f8
[  541.031148]  0000000000000000 0000000000000000 ffffffff813d3540 ffff88007fc03d18
[  541.031150]  0000880000000006 ffff88007c445000 ffffffffa0194160 0000000000000000
[  541.031152] Call Trace:
[  541.031153]  <IRQ>  [<ffffffff8148a9f0>] ? dump_stack+0xd/0x17
[  541.031180]  [<ffffffff813c98c1>] ? __dev_set_promiscuity+0x101/0x180
[  541.031183]  [<ffffffff813d3540>] ? __hw_addr_create_ex+0x60/0xc0
[  541.031185]  [<ffffffff813cfe1a>] ? __dev_set_rx_mode+0xaa/0xc0
[  541.031189]  [<ffffffff813d3a81>] ? __dev_mc_add+0x61/0x90
[  541.031198]  [<ffffffffa01dcf9c>] ? igmp6_group_added+0xfc/0x1a0 [ipv6]
[  541.031208]  [<ffffffff8111237b>] ? kmem_cache_alloc+0xcb/0xd0
[  541.031212]  [<ffffffffa01ddcd7>] ? ipv6_dev_mc_inc+0x267/0x300 [ipv6]
[  541.031216]  [<ffffffffa01c2fae>] ? addrconf_join_solict+0x2e/0x40 [ipv6]
[  541.031219]  [<ffffffffa01ba2e9>] ? ipv6_dev_ac_inc+0x159/0x1f0 [ipv6]
[  541.031223]  [<ffffffffa01c0772>] ? addrconf_join_anycast+0x92/0xa0 [ipv6]
[  541.031226]  [<ffffffffa01c311e>] ? __ipv6_ifa_notify+0x11e/0x1e0 [ipv6]
[  541.031229]  [<ffffffffa01c3213>] ? ipv6_ifa_notify+0x33/0x50 [ipv6]
[  541.031233]  [<ffffffffa01c36c8>] ? addrconf_dad_completed+0x28/0x100 [ipv6]
[  541.031241]  [<ffffffff81075c1d>] ? task_cputime+0x2d/0x50
[  541.031244]  [<ffffffffa01c38d6>] ? addrconf_dad_timer+0x136/0x150 [ipv6]
[  541.031247]  [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6]
[  541.031255]  [<ffffffff8105313a>] ? call_timer_fn.isra.22+0x2a/0x90
[  541.031258]  [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6]

Hunks and backtrace stolen from a patch by Stephen Hemminger.
Reported-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an IPv6 host route with metrics exists, an attempt to add a
new route for the same target with different metrics fails but
rewrites the metrics anyway:

12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000
12sp0:~ # ip -6 route show
fe80::/64 dev eth0  proto kernel  metric 256
fec0::1 dev eth0  metric 1024  rto_min lock 1s
12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1500
RTNETLINK answers: File exists
12sp0:~ # ip -6 route show
fe80::/64 dev eth0  proto kernel  metric 256
fec0::1 dev eth0  metric 1024  rto_min lock 1.5s

This is caused by all IPv6 host routes using the metrics in
their inetpeer (or the shared default). This also holds for the
new route created in ip6_route_add() which shares the metrics
with the already existing route and thus ip6_route_add()
rewrites the metrics even if the new route ends up not being
used at all.

Another problem is that old metrics in inetpeer can reappear
unexpectedly for a new route, e.g.

12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000
12sp0:~ # ip route del fec0::1
12sp0:~ # ip route add fec0::1 dev eth0
12sp0:~ # ip route change fec0::1 dev eth0 hoplimit 10
12sp0:~ # ip -6 route show
fe80::/64 dev eth0  proto kernel  metric 256
fec0::1 dev eth0  metric 1024  hoplimit 10 rto_min lock 1s

Resolve the first problem by moving the setting of metrics down
into fib6_add_rt2node() to the point we are sure we are
inserting the new route into the tree. Second problem is
addressed by introducing new flag DST_METRICS_FORCE_OVERWRITE
which is set for a new host route in ip6_route_add() and makes
ipv6_cow_metrics() always overwrite the metrics in inetpeer
(even if they are not "new"); it is reset after that.

v5: use a flag in _metrics member rather than one in flags

v4: fix a typo making a condition always true (thanks to Hannes
Frederic Sowa)

v3: rewritten based on David Miller's idea to move setting the
metrics (and allocation in non-host case) down to the point we
already know the route is to be inserted. Also rebased to
net-next as it is quite late in the cycle.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The packet hash can be considered a property of the packet, not just
on RX path.

This patch changes name of rxhash and l4_rxhash skbuff fields to be
hash and l4_hash respectively. This includes changing uses of the
field in the code which don't call the access functions.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSimon Derr <simon.derr@bull.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This request state is mostly useless, and properly implementing it
for RDMA would require an extra lock to be taken in handle_recv()
and in rdma_cancel() to avoid this race:

    handle_recv()           rdma_cancel()
        .                     .
        .                   if req->state == SENT
    req->state = RCVD         .
        .                           req->state = FLSH

So just get rid of it.
Signed-off-by: NSimon Derr <simon.derr@bull.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

And move transport-specific code out of net/9p/client.c
Signed-off-by: NSimon Derr <simon.derr@bull.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

We need barriers to guarantee this pattern works as intended:
[w] req->rc, 1		[r] req->status, 1
wmb			rmb
[w] req->status, 1	[r] req->rc

Where the wmb ensures that rc gets written before status,
and the rmb ensures that if you observe status == 1, rc is the new value.
Signed-off-by: NDominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

ip_rt_dump do nothing after IPv4 route caches removal, so we can remove it.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When changing one 16bit value by another in IP header, we can adjust
the IP checksum by doing a simple operation described in RFC 1624, as
reminded by David.

csum_partial() is a complex function on x86_64, not really suited for
small number of checksummed bytes.

I spotted csum_partial() being in the top 20 most consuming functions
(more than 1 %) in a GRO workload, which was rather unexpected.

The caller was inet_gro_complete() doing a csum_replace2() when
building the new IP header for the GRO packet.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The LE scan type paramter defines if active scanning or passive scanning
is in use. Track the currently set value so it can be used for decision
making from other pieces in the core.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

While it is true that getnstimeofday() uses about 40 cycles if TSC
is available, it can use 1600 cycles if hpet is the clocksource.

Switch to get_jiffies_64(), as this is more than enough, and
go back to 60 seconds periods.

Fixes: 8c27bd75 ("tcp: syncookies: reduce cookie lifetime to 128 seconds")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The passkey_notify and user_confirm functions in mgmt.c were expecting
different endianess for the passkey, leading to a big endian bug and
sparse warning in recently added SMP code. This patch converts both
functions to expect host endianess and do the conversion to little
endian only when assigning to the mgmt event struct.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Add a bit in rx_status.vht_flags to let the low level driver
notify mac80211 about a beamformed packet. Propagate this
to the radiotap header.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

On 2.4Ghz band, the channels overlap since the delta
between different channels is 5Mhz while the width of the
receiver is 20Mhz (at least).

This means that we can hear beacons or probe responses from
adjacent channels. These frames will have a significant
lower RSSI which will feed all kinds of logic with inaccurate
data. An obvious example is the roaming algorithm that will
think our AP is getting weak and will try to move to another
AP.

In order to avoid this, update the signal only if the frame
has been heard on the same channel as the one advertised by
the AP in its DS / HT IEs.
We refrain from updating the values only if the AP is
already in the BSS list so that we will still have a valid
(but inaccurate) value if the AP was heard on an adjacent
channel only.

To achieve this, stop taking the channel from DS / HT IEs
in mac80211. The DS / HT IEs is taken into account to
discard the frame if it was received on a disabled channel.
This can happen due to the same phenomenon: the frame is
sent on channel 12, but heard on channel 11 while channel
12 can be disabled on certain devices. Since this check
is done in cfg80211, stop even checking this in mac80211.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
[remove unused rx_freq variable]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Drivers might want to have private data in addition
to all other ieee80211_tx_info.status fields.

The current ieee80211_tx_info.rate_driver_data overlaps
with some of the non-rate data (e.g. ampdu_ack_len), so
it might not be good enough.

Since we already know how much free bytes remained,
simply use this size to define (void *) array.

While on it, change ack_signal type from int to the more
explicit s32 type.
Signed-off-by: NEliad Peller <eliadx.peller@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Fragmentation and reassembly information for 6lowpan is independent from
the 802.15.4 stack and used only by the 6lowpan reassembly process. Move
the ieee802154_frag_info struct to a private are, it needn't be in the
802.15.4 skb control block.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change all internal uses of ieee802154_addr_sa to ieee802154_addr,
except for those instances that communicate directly with userspace.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the operations on 802.15.4 header structs introduced in a previous
patch to create and parse all headers in the mac802154 stack. This patch
reduces code duplication between different parts of the mac802154 stack
that needed information from headers, and also fixes a few bugs that
seem to have gone unnoticed until now:

 * 802.15.4 dgram sockets would return a slightly incorrect value for
   the SIOCINQ ioctl
 * mac802154 would not drop frames with the "security enabled" bit set,
   even though it does not support security, in violation of the
   standard
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch provides a set of structures to represent 802.15.4 MAC
headers, and a set of operations to push/pull/peek these structs from
skbs. We cannot simply pointer-cast the skb MAC header pointer to these
structs, because 802.15.4 headers are wildly variable - depending on the
first three bytes, virtually all other fields of the header may be
present or not, and be present with different lengths.

The new header creation/parsing routines also support 802.15.4 security
headers, which are currently not supported by the mac802154
implementation of the protocol.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable sparse warnings about endianness, replace the remaining fields
regarding network operations without explicit endianness annotations
with such that are annotated, and propagate this through the entire
stack.

Uses of ieee802154_addr_sa are not changed yet, this patch is only
concerned with all other fields (such as address filters, operation
parameters and the likes).
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a replacement ieee802154_addr struct with proper endianness on
fields. Short address fields are stored as __le16 as on the network,
extended (EUI64) addresses are __le64 as opposed to the u8[8] format
used previously. This disconnect with the netdev address, which is
stored as big-endian u8[8], is intentional.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The struct as currently defined uses host byte order for some fields,
and most big endian/EUI display byte order for other fields. Inside the
stack, endianness should ideally match network byte order where possible
to minimize the number of byteswaps done in critical paths, but this
patch does not address this; it is only preparatory.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This was used from vti and is replaced by the IPsec protocol
multiplexer hooks. It is now unused, so remove it.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

This patch adds an IPsec protocol multiplexer for ipv6. With
this it is possible to add alternative protocol handlers, as
needed for IPsec virtual tunnel interfaces.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

IPv6 can be build as a module, so we need mechanism to access
the address family dependent callback functions properly.
Therefore we introduce xfrm_input_afinfo, similar to that
what we have for the address family dependent part of
policies and states.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

We leak an active timer, the hotcpu notifier and all allocated
resources when we exit a namespace. Fix this by introducing a
flow_cache_fini() function where we release the resources before
we exit.

Fixes: ca925cf1 ("flowcache: Make flow cache name space aware")
Reported-by: NJakub Kicinski <moorray3@wp.pl>
Tested-by: NJakub Kicinski <moorray3@wp.pl>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Fan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lars Persson reported following deadlock :

-000 |M:0x0:0x802B6AF8(asm) <-- arch_spin_lock
-001 |tcp_v4_rcv(skb = 0x8BD527A0) <-- sk = 0x8BE6B2A0
-002 |ip_local_deliver_finish(skb = 0x8BD527A0)
-003 |__netif_receive_skb_core(skb = 0x8BD527A0, ?)
-004 |netif_receive_skb(skb = 0x8BD527A0)
-005 |elk_poll(napi = 0x8C770500, budget = 64)
-006 |net_rx_action(?)
-007 |__do_softirq()
-008 |do_softirq()
-009 |local_bh_enable()
-010 |tcp_rcv_established(sk = 0x8BE6B2A0, skb = 0x87D3A9E0, th = 0x814EBE14, ?)
-011 |tcp_v4_do_rcv(sk = 0x8BE6B2A0, skb = 0x87D3A9E0)
-012 |tcp_delack_timer_handler(sk = 0x8BE6B2A0)
-013 |tcp_release_cb(sk = 0x8BE6B2A0)
-014 |release_sock(sk = 0x8BE6B2A0)
-015 |tcp_sendmsg(?, sk = 0x8BE6B2A0, ?, ?)
-016 |sock_sendmsg(sock = 0x8518C4C0, msg = 0x87D8DAA8, size = 4096)
-017 |kernel_sendmsg(?, ?, ?, ?, size = 4096)
-018 |smb_send_kvec()
-019 |smb_send_rqst(server = 0x87C4D400, rqst = 0x87D8DBA0)
-020 |cifs_call_async()
-021 |cifs_async_writev(wdata = 0x87FD6580)
-022 |cifs_writepages(mapping = 0x852096E4, wbc = 0x87D8DC88)
-023 |__writeback_single_inode(inode = 0x852095D0, wbc = 0x87D8DC88)
-024 |writeback_sb_inodes(sb = 0x87D6D800, wb = 0x87E4A9C0, work = 0x87D8DD88)
-025 |__writeback_inodes_wb(wb = 0x87E4A9C0, work = 0x87D8DD88)
-026 |wb_writeback(wb = 0x87E4A9C0, work = 0x87D8DD88)
-027 |wb_do_writeback(wb = 0x87E4A9C0, force_wait = 0)
-028 |bdi_writeback_workfn(work = 0x87E4A9CC)
-029 |process_one_work(worker = 0x8B045880, work = 0x87E4A9CC)
-030 |worker_thread(__worker = 0x8B045880)
-031 |kthread(_create = 0x87CADD90)
-032 |ret_from_kernel_thread(asm)

Bug occurs because __tcp_checksum_complete_user() enables BH, assuming
it is running from softirq context.

Lars trace involved a NIC without RX checksum support but other points
are problematic as well, like the prequeue stuff.

Problem is triggered by a timer, that found socket being owned by user.

tcp_release_cb() should call tcp_write_timer_handler() or
tcp_delack_timer_handler() in the appropriate context :

BH disabled and socket lock held, but 'owned' field cleared,
as if they were running from timer handlers.

Fixes: 6f458dfb ("tcp: improve latencies of timer triggered events")
Reported-by: NLars Persson <lars.persson@axis.com>
Tested-by: NLars Persson <lars.persson@axis.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is not legal to create multiple kmem_cache having the same name.

flowcache can use a single kmem_cache, no need for a per netns
one.

Fixes: ca925cf1 ("flowcache: Make flow cache name space aware")
Reported-by: NJakub Kicinski <moorray3@wp.pl>
Tested-by: NJakub Kicinski <moorray3@wp.pl>
Tested-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the latest draft specification from
the NFC-V committee, ISO/IEC 15693 tags will be
referred to as "Type 5" tags and not "Type V"
tags anymore.  Make the code reflect the new
terminology.
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

We do not need to switch the net_ns if the target net_ns the same
as the current one, so here we add a pre-check of net_ns to avoid
this as David suggested.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the pairable option has been disabled, the pairing procedure
does not create keys for bonding. This means that these generated keys
should not be stored persistently.

For LTK and CSRK this is important to tell userspace to not store these
new keys. They will be available for the lifetime of the device, but
after the next power cycle they should not be used anymore.

Inform userspace to actually store the keys persistently only if both
sides request bonding.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The connection signature resolving key (CSRK) is used for attribute
protocol signed write procedures. This change generates a new local
key during pairing and requests the peer key as well.

Newly generated key and received key will be provided to userspace
using the New Signature Resolving Key management event.

The Master CSRK can be used for verification of remote signed write
PDUs and the Slave CSRK can be used for sending signed write PDUs
to the remote device.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

In order to fix set destruction notifications and get rid of unnecessary
members in private data structures, pass the context to expressions'
destructor functions again.

In order to do so, replace various members in the nft_rule_trans structure
by the full context.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

nf_conntrack_lock is a monolithic lock and suffers from huge contention
on current generation servers (8 or more core/threads).

Perf locking congestion is clear on base kernel:

-  72.56%  ksoftirqd/6  [kernel.kallsyms]    [k] _raw_spin_lock_bh
   - _raw_spin_lock_bh
      + 25.33% init_conntrack
      + 24.86% nf_ct_delete_from_lists
      + 24.62% __nf_conntrack_confirm
      + 24.38% destroy_conntrack
      + 0.70% tcp_packet
+   2.21%  ksoftirqd/6  [kernel.kallsyms]    [k] fib_table_lookup
+   1.15%  ksoftirqd/6  [kernel.kallsyms]    [k] __slab_free
+   0.77%  ksoftirqd/6  [kernel.kallsyms]    [k] inet_getpeer
+   0.70%  ksoftirqd/6  [nf_conntrack]       [k] nf_ct_delete
+   0.55%  ksoftirqd/6  [ip_tables]          [k] ipt_do_table

This patch change conntrack locking and provides a huge performance
improvement.  SYN-flood attack tested on a 24-core E5-2695v2(ES) with
10Gbit/s ixgbe (with tool trafgen):

 Base kernel:   810.405 new conntrack/sec
 After patch: 2.233.876 new conntrack/sec

Notice other floods attack (SYN+ACK or ACK) can easily be deflected using:
 # iptables -A INPUT -m state --state INVALID -j DROP
 # sysctl -w net/netfilter/nf_conntrack_tcp_loose=0

Use an array of hashed spinlocks to protect insertions/deletions of
conntracks into the hash table. 1024 spinlocks seem to give good
results, at minimal cost (4KB memory). Due to lockdep max depth,
1024 becomes 8 if CONFIG_LOCKDEP=y

The hash resize is a bit tricky, because we need to take all locks in
the array. A seqcount_t is used to synchronize the hash table users
with the resizing process.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>