Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 05 3月, 2012 1 次提交
    • P
      ppp: Move ioctl definitions from if_ppp.h to new ppp-ioctl.h · bf7daebb
      由 Paul Mackerras 提交于 
      This moves the definitions of the ioctls, constants and structures
relating to the ppp_generic interface to userspace out from if_ppp.h
to a new file, ppp-ioctl.h.  The new file has my copyright since I
designed and implemented the ppp_generic interface in the late 1990s.
None of the contents of this file comes from the original if_ppp.h
published by Carnegie Mellon University.

Of the remainder of if_ppp.h, only the PPP_MTU definition was being
used, and this replaces the uses of it with PPP_MRU (which is identical).
Therefore, this replaces the entire file with the single line

#include <linux/ppp-ioctl.h>

which clearly doesn't contain any CMU code.  Thus I have removed the
CMU copyright notice with its problematic advertising clause, and in
fact since it's only one trivial line I have not added any other
copyright notice.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bf7daebb
  3. 05 11月, 2011 1 次提交
  5. 13 9月, 2011 1 次提交
  7. 08 7月, 2011 1 次提交
    • T
      drivers/virt: introduce Freescale hypervisor management driver · 6db71994
      由 Timur Tabi 提交于 
      Add the drivers/virt directory, which houses drivers that support
virtualization environments, and add the Freescale hypervisor management
driver.

The Freescale hypervisor management driver provides several services to
drivers and applications related to the Freescale hypervisor:

1. An ioctl interface for querying and managing partitions

2. A file interface to reading incoming doorbells

3. An interrupt handler for shutting down the partition upon receiving the
   shutdown doorbell from a manager partition

4. A kernel interface for receiving callbacks when a managed partition
   shuts down.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      6db71994
  9. 10 6月, 2011 1 次提交
  11. 25 5月, 2011 1 次提交
    • J
      mmc: core: Add mmc CMD+ACMD passthrough ioctl · cb87ea28
      由 John Calixto 提交于 
      Allows appropriately-privileged applications to send CMD (normal) and ACMD
(application-specific; preceded with CMD55) commands to cards/devices on
the mmc bus.  This is primarily useful for enabling the security
functionality built in to every SD card.

It can also be used as a generic passthrough (e.g. to enable virtual
machines to control mmc bus devices directly).  However, this use case has
not been tested rigorously.  Generic passthrough testing was only conducted
for a few non-security opcodes to prove the feasibility of the passthrough.

Since any opcode can be sent using this passthrough, it is very possible to
render the card/device unusable.  Applications that use this ioctl must
have CAP_SYS_RAWIO.

Security commands tested on TI PCIxx12 (SDHCI), Sigma Designs SMP8652 SoC,
TI OMAP3621/OMAP3630 SoC, Samsung S5PC110 SoC, Qualcomm MSM7200A SoC.
Signed-off-by: NJohn Calixto <john.calixto@modsystems.com>
Reviewed-by: NAndrei Warkentin <andreiw@motorola.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NChris Ball <cjb@laptop.org>
      cb87ea28
  13. 20 5月, 2011 1 次提交
  15. 22 3月, 2011 1 次提交
  17. 03 2月, 2011 2 次提交
  19. 14 1月, 2011 1 次提交
  21. 29 12月, 2010 3 次提交
  23. 21 10月, 2010 1 次提交
  25. 06 10月, 2010 1 次提交
  27. 04 8月, 2010 1 次提交
    • J
      Documentation: update broken web addresses. · 0ea6e611
      由 Justin P. Mattock 提交于 
      Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NThomas Weber <weber@corscience.de>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      0ea6e611
  29. 27 7月, 2010 1 次提交
  31. 03 3月, 2010 1 次提交
  33. 12 1月, 2010 1 次提交
  35. 07 10月, 2009 1 次提交
    • S
      ceph: ioctls · 8f4e91de
      由 Sage Weil 提交于 
      A few Ceph ioctls for getting and setting file layout (striping)
parameters, and learning the identity and network address of the OSD a
given region of a file is stored on.
Signed-off-by: NSage Weil <sage@newdream.net>
      8f4e91de
  37. 24 9月, 2009 1 次提交
  39. 10 9月, 2009 1 次提交
  41. 01 9月, 2009 1 次提交
  43. 10 8月, 2009 1 次提交
  45. 19 6月, 2009 1 次提交
    • R
      LinuxPPS: core support · eae9d2ba
      由 Rodolfo Giometti 提交于 
      This patch adds the kernel side of the PPS support currently named
"LinuxPPS".

PPS means "pulse per second" and a PPS source is just a device which
provides a high precision signal each second so that an application can
use it to adjust system clock time.

Common use is the combination of the NTPD as userland program with a GPS
receiver as PPS source to obtain a wallclock-time with sub-millisecond
synchronisation to UTC.

To obtain this goal the userland programs shoud use the PPS API
specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating
Systems, Version 1.0) which in part is implemented by this patch.  It
provides a set of chars devices, one per PPS source, which can be used to
get the time signal.  The RFC's functions can be implemented by accessing
to these char devices.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eae9d2ba
  47. 30 3月, 2009 2 次提交
  49. 07 1月, 2009 1 次提交
  51. 09 12月, 2008 1 次提交
  53. 15 11月, 2008 1 次提交
  55. 18 10月, 2008 2 次提交
  57. 14 8月, 2008 1 次提交
    • W
      usb: auerswald: remove driver (obsolete) · 88d987d6
      由 Wolfgang Mües 提交于 
      This patch removes the auerswald USB driver from the linux kernel
2.6.26.

This driver was included into the kernel mainly to connect to the ISDN
framework. This was done in linux 2.4.x. For 2.6.x, due to the fragile
and moving ISDN support, this connection was never realized, and the
only use of this driver was for device configuration. In the age of DSL,
the demand of ISDN support is getting very low.

Meanwhile, with the advent of libusb, an userspace driver was done for
the device configuration which works fine for linux and mac. (Thanks to
the libusb developers!). The userspace driver is downloadable from the
auerswald web site.

So this driver is obsolete now and has to be removed. Many thanks to all
developers which helped me to bring this driver up and working.
Signed-off-by: NWolfgang Muees <wolfgang@iksw-muees.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      88d987d6
  59. 14 7月, 2008 1 次提交
  61. 27 4月, 2008 1 次提交
  63. 26 1月, 2008 1 次提交
  65. 17 7月, 2007 1 次提交
  67. 09 5月, 2007 1 次提交
  69. 12 2月, 2007 1 次提交