- 13 12月, 2014 1 次提交
-
-
由 Rafael J. Wysocki 提交于
After commit b2b49ccb (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere in the code under arch/arm/ (the defconfig files will be modified later). Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NNishanth Menon <nm@ti.com> Acked-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
-
- 11 12月, 2014 10 次提交
-
-
由 Johan Hovold 提交于
Drop the vendor-prefix from the "ti,system-power-controller" device-tree property name. It has been agreed to make "system-power-controller" a standard property and to drop the vendor-prefix that is currently used by several drivers. Note that drivers that have used "<vendor>,system-power-controller" in a released kernel will need to support both versions. Signed-off-by: NJohan Hovold <johan@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
Configure the RTC as system-power controller, which allows the system to be powered off as well as woken up again on subsequent RTC alarms. Note that the PMIC needs to be put in SLEEP (rather than OFF) mode to maintain RTC power. Specifically, this means that the PMIC ti,pmic-shutdown-controller property must be left unset in order to be able to wake up on RTC alarms. Tested on BeagleBone Black (rev A5). Signed-off-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NFelipe Balbi <balbi@ti.com> Tested-by: NFelipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
Enable am33xx specific RTC features (e.g. PMIC control) by adding "ti,am3352-rtc" to the compatible property of the rtc node. Signed-off-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NFelipe Balbi <balbi@ti.com> Tested-by: NFelipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Use the more common pr_warn. Coalesce formats, realign arguments. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Coalesce the formats and align arguments. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Eliminate the unlikely possibility of message interleaving for early_printk/early_vprintk use. early_vprintk can be done via the %pV extension so remove this unnecessary function and change early_printk to have the equivalent vprintk code. All uses of early_printk already end with a newline so also remove the unnecessary newline from the early_printk function. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yann Droneaud 提交于
This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yann Droneaud 提交于
This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
As a small zero page, huge zero page should not be accounted in smaps report as normal page. For small pages we rely on vm_normal_page() to filter out zero page, but vm_normal_page() is not designed to handle pmds. We only get here due hackish cast pmd to pte in smaps_pte_range() -- pte and pmd format is not necessary compatible on each and every architecture. Let's add separate codepath to handle pmds. follow_trans_huge_pmd() will detect huge zero page for us. We would need pmd_dirty() helper to do this properly. The patch adds it to THP-enabled architectures which don't yet have one. [akpm@linux-foundation.org: use do_div to fix 32-bit build] Signed-off-by: N"Kirill A. Shutemov" <kirill@shutemov.name> Reported-by: NFengguang Wu <fengguang.wu@intel.com> Tested-by: NFengwei Yin <yfw.kernel@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
This off by one bug is harmless but it upsets the static checkers and the code is obvious so it doesn't hurt to fix it. The Smatch warning is: arch/sh/mm/numa.c:47 setup_bootmem_node() error: buffer overflow 'node_data' 1024 <= 1024 Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 12月, 2014 1 次提交
-
-
由 Borislav Petkov 提交于
I'm such a moron! The simple solution of saving the BSP patch for use on resume was too simple (and wrong!), hint: sizeof(struct microcode_intel). What needs to be done instead is to fish out the microcode patch we have stashed previously and apply that on the BSP in case the late loader hasn't been utilized. So do that instead. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20141208110820.GB20057@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 08 12月, 2014 28 次提交
-
-
由 Richard Weinberger 提交于
systemd has a hard dependency on CONFIG_FHANDLE. If you run systemd with CONFIG_FHANDLE=n it will somehow boot but fail to spawn a getty or other basic services. As systemd is now used by most x86 distributions it makes sense to enabled this by default and save kernel hackers a lot of value debugging time. Signed-off-by: NRichard Weinberger <richard@nod.at> Cc: gregkh@linuxfoundation.org Cc: rafael.j.wysocki@intel.com Cc: pebolle@tiscali.nl Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1416958612-7448-1-git-send-email-richard@nod.atSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Rasmus Villemoes 提交于
seq_puts is a lot cheaper than seq_printf, so use that to print literal strings. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Link: http://lkml.kernel.org/r/1417208622-12264-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
arch_spin_unlock_wait() looks very suboptimal, to the point I think this is just wrong and can lead to livelock: if the lock is heavily contended we can never see head == tail. But we do not need to wait for arch_spin_is_locked() == F. If it is locked we only need to wait until the current owner drops this lock. So we could simply spin until old_head != lock->tickets.head in this case, but .head can overflow and thus we can't check "unlocked" only once before the main loop. Also, the "unlocked" check can ignore TICKET_SLOWPATH_FLAG bit. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <Waiman.Long@hp.com> Link: http://lkml.kernel.org/r/20141201213417.GA5842@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Borislav Petkov 提交于
We need the additional "k" to make it a hard-c: https://en.wiktionary.org/wiki/panickedSigned-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1417642605-15730-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Tobias Klauser 提交于
If NIOS2_CMDLINE_IGNORE_DTB is selected but CMDLINE_BOOL isn't and thus CONFIG_CMDLINE is not defined, the build fails with the following error: arch/nios2/kernel/setup.c: In function 'nios2_boot_init': arch/nios2/kernel/setup.c:131:30: error: 'CONFIG_CMDLINE' undeclared (first use in this function) strncpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); This can be reproduced using randconfig with KCONFIG_SEED=0xE5B8749E, i.e. 'make KCONFIG_SEED=0xE5B8749E ARCH=nios2 randconfig'. Fix this by letting NIOS2_CMDLINE_IGNORE_DTB depend on CMDLINE_BOOL, so we actually have a default kernel command string to fall back to. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Tobias Klauser 提交于
kernel/time/Kconfig expects that NR_CPUS is defined. This fixes the following config warning: "kernel/time/Kconfig:163:warning: range is invalid" Follow 4cbbbb43 ("microblaze: Fix missing NR_CPUS in menuconfig") Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Tobias Klauser 提交于
TI_TASK is not used in nios2 assembly code, so remove it. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Tobias Klauser 提交于
The irq member of struct nios2_timer is only written to but never read, thus it can be removed. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Tobias Klauser 提交于
shm_align_mask is not defined/used on nios2, thus there is no need to declare it. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This is require for __iomem definition. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
Move asm-generic/io.h to end of file to override functions like phys_to_virt, virt_to_phys in asm-generic/io.h. This is due to recent commit 9216efaf introduced new way to override functions by checking for the existence of a macro with the same of the function. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
Don't need asm-generic/iomap.h and asm-generic/io.h added default ioread8/16/32 iowrite8/16/32 implementation. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
Remove extra space between # and define. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Dmitry Torokhov 提交于
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: NDmitry Torokhov <dtor@chromium.org> Reviewed-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Tobias Klauser 提交于
Make the checking for div/mul/mulx instruction config symbols easier to read by using IS_ENABLED instead of #ifdefs. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This patch adds Makefile and Kconfig files required for building a nios2 kernel. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
Add ptrace support for nios2. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This patch adds support for loadable modules. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This file contains constants for the instruction macros, cpu registers, fields and bits. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This patch introduces a few nios2-specific header files. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
Add time keeping code for nios2. Signed-off-by: NLey Foon Tan <lftan@altera.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ley Foon Tan 提交于
Add device tree support to arch/nios2. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
Add optimised library functions for nios2. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This patch adds support for signal handling. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This patch adds support for system calls from userspaces. It uses the asm-generic/unistd.h definitions with architecture spcific syscall. The sys_call_table is just an array defined in a C file and it contains pointers to the syscall functions. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This patch adds definitions for the ELF format Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
由 Ley Foon Tan 提交于
This patch adds support for the DMA mapping API. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-