Don't create vmaster controls if no slaves are found in the given list.
This prevents the error due to an empty vmaster control.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Attached patch fix race condition in hd_codec generic bound volume/swtich
controls

oops on this bug can be easy reproduced by two mixer apps on SMP system with
PREEMPT kernel

dmesg:

 ALSA /home/ss/ALSA/alsa-driver-1.0.16/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:596:
 hda_intel: azx_get_response timeout, switching to polling mode: las
 t cmd=0x014f0900
 BUG: unable to handle kernel paging request at virtual address 00070006
 printing eip: f8f43e95 *pde = 00000000
 Oops: 0000 [#1] PREEMPT SMP
 Modules linked in: i915 drm snd_seq_dummy snd_seq_oss snd_seq_midi_event
 snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss bnep rfcomm hidp l2cap
 bluetooth w
 lan_wep acpi_cpufreq coretemp hwmon mmc_block pcspkr psmouse wlan_scan_sta
 ath_rate_sample snd_hda_intel ath_pci serio_raw wlan tg3 sdhci snd_pcm
 firewire_o
 hci mmc_core i2c_i801 snd_timer firewire_core snd_page_alloc ath_hal(P)
 snd_hwdep snd iTCO_wdt crc_itu_t iTCO_vendor_support shpchp video output
 acer_acpi b
 acklight led_class wmi_acer

 Pid: 3969, comm: gkrellm Tainted: P        (2.6.24-jm #4)
 EIP: 0060:[<f8f43e95>] EFLAGS: 00010292 CPU: 0
 EIP is at snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel]
 EAX: 00000000 EBX: f7478e00 ECX: f763e000 EDX: f764f788
 ESI: 00070002 EDI: edce5e00 EBP: edc3fe64 ESP: edc3fe54
  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
 Process gkrellm (pid: 3969, ti=edc3e000 task=f1e4e000 task.ti=edc3e000)
 Stack: f764f77c f7478e00 edce5e00 f6dd6000 edc3fe84 f8e590e8 edc7a239 f6d14034
       f764f34c f6c0f7e0 edc3ff30 f6d14034 edc3fea8 f8e591b7 edc3ff30 edc3ff2c
       00000000 f70aa668 f6d14034 f8e59165 bfbfadb0 edc3ff40 f8e587aa edc3ff2c
 Call Trace:
 [<c0104fbb>] show_trace_log_lvl+0x1a/0x2f
 [<c010506d>] show_stack_log_lvl+0x9d/0xa5
 [<c0105119>] show_registers+0xa4/0x1bd
 [<c0105354>] die+0x122/0x206
 [<c03daccc>] do_page_fault+0x535/0x623
 [<c03d940a>] error_code+0x72/0x78
 [<f8e590e8>] snd_mixer_oss_get_volume1_vol+0x74/0xf1 [snd_mixer_oss]
 [<f8e591b7>] snd_mixer_oss_get_volume1+0x52/0xa5 [snd_mixer_oss]
 [<f8e587aa>] snd_mixer_oss_ioctl1+0x673/0x71e [snd_mixer_oss]
 [<f8e588af>] snd_mixer_oss_ioctl+0xb/0xd [snd_mixer_oss]
 [<c017af0a>] do_ioctl+0x22/0x67
 [<c017b186>] vfs_ioctl+0x237/0x24a
 [<c017b1ca>] sys_ioctl+0x31/0x4b
 [<c010402e>] syscall_call+0x7/0xb
 =======================
 Code: 3f 49 c7 89 f8 59 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 83 ec 04
 8b 70 5c 8b 40 60 05 7c 01 00 00 89 45 f0 e8 c0 3f 49 c7 <8b> 46 04 89 fa 89
 4
 3 5c 89 d8 8b 0e ff 11 89 73 5c 89 c7 8b 45
 EIP: [<f8f43e95>] snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel]
 SS:ESP 0068:edc3fe54
 ---[ end trace 0a20bc209e9397cc ]---

similar issue report present in ALSA bugtracking system
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3652Signed-off-by: NSerge A. Suchkov <Serge.A.S@tochka.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allows for dynamically creating mono out mixer controls and well
as mono mux controls.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a mono_out_pin field to autocfg struct, and code to parse
for the mono_out_line.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Don't read the widget list again as we already have it at the beginning.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added afg and mfg preset masks for more finer codec-preset selection.
Signed-off-by: NMarc Boucher <marc@linuxant.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a delay after the power state change as a partial workaround
for 'hda_intel: azx_get_response timeout' problem on Cxt codecs.
Signed-off-by: NMarc Boucher <marc@linuxant.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Print the name of the defect controls in error messages in amp info
callback.  This will make debugging easier.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add master controls using vmaster to codecs that have no real hardware
master volume registers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added AC_VERB_GET_DIGI_CONVERT_2 and renamed AC_VERB_GET_DIGI_CONVERT to
AC_VERB_GET_DIGI_CONVERT_1 to stay consistent with the SET variants. Added
AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK,
and AC_PINCAP_LR_SWAP. The missing fields were listed in the ALC883 datasheet
rev 1.3.
Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Check the value ranges in ctl put callbacks properly so that
invalid values won't be stored or written to registers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Some small improvements on autocfg stuff:
- sort HP pins by sequence number, too
- move sole mic pin to AUTO_PIN_MIC instead of AUTO_PIN_FRONT_MIC
- ditto for line-in pin
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the missing STAC9228 DMIC support.
Also added a new vendor id tag for IDT.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The recent addition of checking PINCAP for EAPD seems to break some
systems due to unexpected response from the codec chip.  We shouldn't
issue GET_PINCAP verb to non-PIN widgets.  Now checks the widget type
before checking EAPD bit.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

AD1986A has a hardware problem that it cannot share a stream with
multiple pins properly.  The problem occurs e.g. when a volume is changed
during playback.
So far, hda-intel driver unconditionally assigns the stream to multiple
output pins in copy-front mode, and this should be avoided for AD1986A
codec.
The original fix patch was by zhejiang <zhe.jiang@intel.com>.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fixed the build error from patch_sigmatel.c when built without
CONFIG_SND_HDA_GENERIC by defining a dummy function to return error.
Also, clean up hda_codec.c by removing unneeded ifdefs (the compiler
will optimize out).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fix the output of Gateway laptops with STAC9200 codec chip.
They require the EAPD control for some pins.  These pins shouldn't be
powered down.
To enable EAPD control, a new model 'gateway' was added to STAC9200.
The known PCI SSIDs are included in the quirk list.
The fix was originally suggested by Brian Hinz, in ALSA bug#2948.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added zero checks in input-mux helper functions to avoid Oops.
Some devices may have no input pins while the driver registers
control elements calling these functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added CONFIG_SND_AC97_POWER_SAVE_DEFAULT and CONFIG_SND_HDA_POWER_SAVE_DEFAULT
Kconfig options as the default values for power-saving mode of AC97 and
HD-audio drivers, respectively.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

When modem is disabled in the BIOS, detection of the number of codecs
always fails after booting if STATESTS is not cleared first.
This patch fixes this problem and also adds an error check in a place
where a read error would lead to a very large number of pointless loops.
Signed-off-by: NDanny Tholen <obiwan@mailmij.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Comment in hda_intel.c states that 'the explicit resume is needed only
when POWER_SAVE isn't set', but this is not true.
There is no code that will automaticly power up the codec on resume,
but only code that powers it up when user accesses it. So if user
leaves a sound playing, codec will not be powered
To fix that I check if there are any codecs that should be powered
codec->power_count, and if so I power them up together with main
controller.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

codec->power_transition is supposed to be true while codec is going
to be shut off if in the mean time somebody calls snd_hda_power_up,
hda_power_work will not shut down the codec, but nether will clear
codec->power_transition, thus it stays on forever. Fix this.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

gcc-3.x doesn't like forward inlining:
  CC [M]  sound/pci/hda/hda_codec.o
sound/pci/hda/hda_codec.c: In function 'snd_hda_codec_free':
sound/pci/hda/hda_codec.c:517: sorry, unimplemented: inlining failed in call to 'free_hda_cache': function body not available
sound/pci/hda/hda_codec.c:534: sorry, unimplemented: called from here
sound/pci/hda/hda_codec.c:517: sorry, unimplemented: inlining failed in call to 'free_hda_cache': function body not available
sound/pci/hda/hda_codec.c:535: sorry, unimplemented: called from here
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Avoid unnecessary work scheduling for power-off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added flush_scheduled_work() in snd_hda_codec_free() to make sure that
the all work is gone.  Also, optimized the condition to schedule the
delayed work in snd_hda_power_down().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

In the power-saving mode, the suspend is done dynamically at power-down.
So we don't have to call suspend stuff explicitly if it's already
powered down.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

codec->patch_ops.init can be NULL.  Check before calling it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

The controller power wasn't turned on properly at resume due to the
power-saving patch.  Now fixed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added CONFIG_SND_HDA_POWER_SAVE kconfig.  It's an experimental option
to achieve an aggressive power-saving.  With this option, the driver
will turn on/off the power of each codec and controller chip dynamically
on demand.
The patch introduces a new module option 'power_save'.  It specifies
the second of time-out for automatic power-down.  As default, it's
10 seconds.  Setting 0 means to suppress the power-saving feature.
The codec may have analog-input loopbacks, which are usually represented
by mixer elements such as 'Mic Playback Switch' or 'CD Playback Switch'.
When these are on, we cannot turn off the mixer and the codec chip has
to be kept on.  For bookkeeping these states, a new codec-callback is
introduced.
For the bus-controller side, a new callback pm_notify is introduced,
which can be used to turn on/off the contoller appropriately.
Note that this power-saving might cause slight click-noise at
power-on/off.  Also, it might take some time to wake up the codec, and
might even drop some tones at the very beginning.  This seems to be the
side-effect of turning off the controller chip.
This turn-off of the controller can be disabled by undefining
HDA_POWER_SAVE_RESET_CONTOLLER in hda_intel.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added snd_hda_codec_amp_stereo() function that changes both of stereo
channels with the same mask and value bits.  It simplifies most of
amp-handling codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

So far, the driver looked the table of snd_kcontrol_new used for creating
mixer elements and forces to call each of its put callbacks in PM resume
code.  This is too ugly and hackish.
Now, the resume is simplified using the codec amp and command register
caches.  The driver simply restores the values that have been written
in the cache table.  With this simplification, most codec support codes
don't require any special resume callback.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds the cache for codec command registers.
snd_hda_codec_write_cache() and snd_hda_sequence_write_cache() do
the write operations with caching, which values can be resumed via
snd_hda_codec_resume_cache().
The patch introduces only the framework, and no codec code is using
this cache yet.  It'll be implemented in the following patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Rewrite the code to handle amp cache and hash tables to be more
generic.  This routine will be used by the register caches in the
next patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Some functions in hda_codec.c are called from patch ops, which are
kept in the codec instance even after initialization.  Thus they
shouldn't be marked as __devinit.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Create kernel configs to choose the codec support codes to build.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added callbacks for a generic bind-control of mixer elements.
This can be used for creating a mixer element controlling multiple
widgets at the same time.  Two macros, HDA_BIND_VOL() and HDA_BIND_SW(),
are introduced for creating bind-volume and bind-switch, respectively.
It taks the mixer element name and struct hda_bind_ctls pointer, which
contains the real control callbacks in ops field and long array for
private_value of each bound widget.
All widgets have to be the same type (i.e. the same amp capability).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added a hwdep interface for each codec (enabled per kconfig).
This interface can be used for reading/writing HD-audio verbs
and other purposes as future extensions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Clean up codes using the new common snd_ctl_boolean_*_info() callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

STAC922x provides the capture boost level up to 4, but actually it
works only up to 2.  Since the range of the mixer is automatically
defined from amp-capability bits, we need to override the value
beforehand.  snd_hda_override_amp_caps() is introduced for this
purpose.
The function patch_stac922x() calls this for NID 0x12 (Mux Capture
Volume).  This should fix another recording problem on Intel Macs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>