It is not referenced outside of net/ipv4/udp.c any longer.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch creates one common function which is called by
udp_v4_get_port() and udp_v6_get_port(). As a result,
  * duplicated code is removed
  * udp_port_rover and local port lookup can now be removed from udp.h
  * further savings follow since the same function will be used by UDP-Litev4
    and UDP-Litev6

In contrast to the patch sent in response to Yoshifujis comments
(fixed by this variant), the code below also removes the
EXPORT_SYMBOL(udp_port_rover), since udp_port_rover can now remain
local to net/ipv4/udp.c.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed by Adrian Bunk.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the 'value' argument from NLA_PUT_FLAG which is
unused anyway. The documentation comment was already correct so it
doesn't need an update :)
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds transmit buffering to DCCP.

I have tested with CCID2/3 and with loss and rate limiting.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This shifts further sysctls into feat.h. No change in
functionality - shifting code only.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix mark comparison, also dump the mask to userspace when the mask is
zero, but the mark is not (in which case the mark is dumped, so the
mask is needed to make sense of it).
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support masking the nfmark value before the search. The mask value is
global for all filters contained in one instance. It can only be set
when a new instance is created, all filters must specify the same mask.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for fwmark masks. For compatibility a mask of 0xFFFFFFFF is used
when a mark value != 0 is sent without a mask.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NSteven Whitehouse <steve@chygwyn.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a FRA_FWMASK attributes for fwmark masks. For compatibility a mask of
0xFFFFFFFF is used when a mark value != 0 is sent without a mask.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a patch by Brian Haley.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for fwmark masks.
A mask of 0xFFFFFFFF is used when a mark value != 0 is sent without a mask.

Based on patch for net/ipv4/fib_rules.c by Patrick McHardy <kaber@trash.net>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It should not be RTA_MAX+1 but FRA_MAX+1.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Add missing nla_policy entry.
- type of fwmark is u32, not u8.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even if we find an exact match in the hash table,
we must inspect the inexact list to look for a match
with a better priority.

Noticed by Masahide NAKAMURA <nakam@linux-ipv6.org>.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[NET]: Add common helper functions to convert IPv6/IPv4 address string to network address structure.

These helpers can be used in netfilter, cifs etc.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Based on patch by Jean Lorchat <lorchat@sfc.wide.ad.jp>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

- Remove redundant code.  Pointed out by Brian Haley <brian.haley@hp.com>.
- Unify code paths with/without CONFIG_IPV6_MIP.
- Use NIP6_FMT for IPv6 address textual presentation.
- Fold long line.  Pointed out by David Miller <davem@davemloft.net>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

First of all, if the xfrm_state only gets used for input
packets this entropy is a complete waste.

Secondly, it is often the case that a configuration loads
many rules (perhaps even dynamically) and they don't all
necessarily ever get used.

This get_random_bytes() call was showing up in the profiles
for xfrm_state inserts which is how I noticed this.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This idea is from Alexey Kuznetsov.

It is common for policies to be non-prefixed.  And for
that case we can optimize lookups, insert, etc. quite
a bit.

For each direction, we have a dynamically sized policy
hash table for non-prefixed policies.  We also have a
hash table on policy->index.

For prefixed policies, we have a list per-direction which
we will consult on lookups when a non-prefix hashtable
lookup fails.

This still isn't as efficient as I would like it.  There
are four immediate problems:

1) Lots of excessive refcounting, which can be fixed just
   like xfrm_state was
2) We do 2 hash probes on insert, one to look for dups and
   one to allocate a unique policy->index.  Althought I wonder
   how much this matters since xfrm_state inserts do up to
   3 hash probes and that seems to perform fine.
3) xfrm_policy_insert() is very complex because of the priority
   ordering and entry replacement logic.
4) Lots of counter bumping, in addition to policy refcounts,
   in the form of xfrm_policy_count[].  This is merely used
   to let code path(s) know that some IPSEC rules exist.  So
   this count is indexed per-direction, maybe that is overkill.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The source address is always non-prefixed so we should use
it to help give entropy to the bydst hash.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The refcounting done for timers and hash table insertions
are just wasted cycles.  We can eliminate all of this
refcounting because:

1) The implicit refcount when the xfrm_state object is active
   will always be held while the object is in the hash tables.
   We never kfree() the xfrm_state until long after we've made
   sure that it has been unhashed.

2) Timers are even easier.  Once we mark that x->km.state as
   anything other than XFRM_STATE_VALID (__xfrm_state_delete
   sets it to XFRM_STATE_DEAD), any timer that fires will
   do nothing and return without rearming the timer.

   Therefore we can defer the del_timer calls until when the
   object is about to be freed up during GC.  We have to use
   del_timer_sync() and defer it to GC because we can't do
   a del_timer_sync() while holding x->lock which all callers
   of __xfrm_state_delete hold.

This makes SA changes even more light-weight.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just let GC and other normal mechanisms take care of getting
rid of DST cache references to deleted xfrm_state objects
instead of walking all the policy bundles.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead, simply set all potentially aliasing existing xfrm_state
objects to have the current generation counter value.

This will make routes get relooked up the next time an existing
route mentioning these aliased xfrm_state objects gets used,
via xfrm_dst_check().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It can use __xfrm{4,6}_addr_hash().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Besides the daddr, key the hash on family and reqid too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each xfrm_state inserted gets a new generation counter
value.  When a bundle is created, the xfrm_dst objects
get the current generation counter of the xfrm_state
they will attach to at dst->xfrm.

xfrm_bundle_ok() will return false if it sees an
xfrm_dst with a generation count different from the
generation count of the xfrm_state that dst points to.

This provides a facility by which to passively and
cheaply invalidate cached IPSEC routes during SA
database changes.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The grow algorithm is simple, we grow if:

1) we see a hash chain collision at insert, and
2) we haven't hit the hash size limit (currently 1*1024*1024 slots), and
3) the number of xfrm_state objects is > the current hash mask

All of this needs some tweaking.

Remove __initdata from "hashdist" so we can use it safely at run time.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>