Based on an older patch from  Mike Kravetz <kravetz@us.ibm.com>

We need to have a mem_map for high addresses in order to make fops->no_page
work on spufs mem and register files.  So far, we have used the
memory_present() function during early bootup, but that did not work when
CONFIG_NUMA was enabled.

We now use the __add_pages() function to add the mem_map when loading the
spufs module, which is a lot nicer.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

reflect the changes to Kconfig since the last update.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch disables and saves local interrupts during
hash_page processing for SPE contexts.

We have to do it explicitly in the spu_irq_class_1_bottom
function. For the interrupt handlers, we get the behaviour
implicitly by using SA_INTERRUPT to disable interrupts while
in the handler.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a cputable entry for the POWER6 processor.

The SIHV and SIPR bits in the mmcra have moved in POWER6, so disable
support for that until oprofile is fixed.

Also tell firmware that we know about POWER6.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Wire up *at syscalls.

This patch has been tested on ppc64 (using glibc's testsuite, both 32bit
and 64bit), and compile-tested for ppc32 (I have currently no ppc32 system
available, but I expect no problems).
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some people report that we die on some Macs when we are expecting to
catch machine checks after poking at some random I/O address. I'd seen
it happen on my dual G4 with serial ports until we fixed those to use
OF, but now other users are reporting it with i8042.

This expands the use of check_legacy_ioport() to avoid that situation
even on 32-bit kernels.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Normally, ppc64 module .ko files contain a table-of-contents (.toc)
section, but if the module doesn't reference any static or external
data or external procedures, it is possible for gcc/binutils to
generate a .ko that doesn't have a .toc.  Currently the module
loader refuses to load such a module, since it needs the address
of the .toc section to use in relocations.

This patch fixes the problem by using the address of the .stubs
section instead, which is an acceptable substitute in this situation.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds code to call a new firmware method to tell the firmware
what machines and capabilities (such as VMX/Altivec) we support.
This will be needed on POWER5+ and POWER6 machines, and it has no
effect on past and current machines.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

At present, ARCH=powerpc kernels can waste considerable space in
pagetables when making large hugepage mappings.  Hugepage PTEs go in
PMD pages, but each PMD page maps 256M and so contains only 16
hugepage PTEs (128 bytes of data), but takes up a 1024 byte
allocation.  With CONFIG_PPC_64K_PAGES enabled (64k base page size),
the situation is worse.  Now hugepage PTEs are at the PTE page level
(also mapping 256M), so we store 16 hugepage PTEs in a 64k allocation.

The PowerPC MMU already means that any 256M region is either all
hugepage, or all normal pages.  Thus, with some care, we can use a
different allocation for the hugepage PTE tables and only allocate the
128 bytes necessary.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We could use the recently added PCI_CLASS_SERIAL_USB_UHCI,
PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in
more places, for slightly shorter and clearer code.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Few of the notifier_chain_register() callers use __init in the definition
of notifier_call.  It is incorrect as the function definition should be
available after the initializations (they do not unregister them during
initializations).

This patch fixes all such usages to _not_ have the notifier_call __init
section.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Few of the notifier_chain_register() callers use __devinitdata in the
definition of notifier_block data structure.  It is incorrect as the
data structure should be available after the initializations (they do
not unregister them during initializations).

This was leading to an oops when notifier_chain_register() call is
invoked for those callback chains after initialization.

This patch fixes all such usages to _not_ have the notifier_block data
structure in the init data section.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice()
moves data to a pipe, with the input being a user address range instead.

This uses an approach suggested by Linus, where we can hold partial ranges
inside the pages[] map. Hopefully this will be useful for network
receive support as well.
Signed-off-by: NJens Axboe <axboe@suse.de>

Default choices for all.
Signed-off-by: NWill Schmidt <willschm@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Every time a new syscall gets added, a BUILD_BUG_ON in
arch/powerpc/platforms/cell/spu_callbacks.c gets triggered.
Since the addition of a new syscall is rather harmless,
the error should just be removed.

While we're here, add sys_tee to the list and add a comment
to systbl.S to remind people that there is another list
on powerpc.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The new i2c implementation for PowerMac has a regression that causes the
hardware to go out of state when probing non-existent devices. While
fixing that, I also found & fixed a couple of other corner cases. This
fixes booting with a pbbuttons version that scans the i2c bus for an LMU
controller among others. Tested on a dual G5 with thermal control (which
has heavy i2c activity) with no problem so far.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Turn on the DART already at 1GB. This is needed because of crippled
devices in some systems, i.e. Airport Extreme cards, only supporting
30-bit DMA addresses.

Otherwise, users with between 1 and 2GB of memory will need to manually
enable it with iommu=force, and that's no good.

Some simple performance tests show that there's a slight impact of
enabling DART, but it's in the 1-3% range (kernel build with disk I/O
as well as over NFS).

iommu=off can still be used for those who don't want to deal with the
overhead (and don't need it for any devices).
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some devices don't support full 32-bit DMA address space, which we currently
assume. Add the required mask-passing to the IOMMU allocators.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Andrew Morton pointed out that compiler might not inline the functions
marked for inline in kprobes.  There-by allowing the insertion of probes
on these kprobes routines, which might cause recursion.

This patch removes all such inline and adds them to kprobes section
there by disallowing probes on all such routines.  Some of the routines
can even still be inlined, since these routines gets executed after the
kprobes had done necessay setup for reentrancy.
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We weren't using the recommended sequence for putting the CPU into
nap mode.  When I changed the idle loop, for some reason 7447A cpus
started hanging when we put them into nap mode.  Changing to the
recommended sequence fixes that.

The complexity here is that the recommended sequence is a loop that
keeps putting the cpu back into nap mode.  Clearly we need some way
to break out of the loop when an interrupt (external interrupt,
decrementer, performance monitor) occurs.  Here we use a bit in
the thread_info struct to indicate that we need this, and the exception
entry code notices this and arranges for the exception to return
to the value in the link register, thus breaking out of the loop.
We use a new `local_flags' field in the thread_info which we can
alter without needing to use an atomic update sequence.

The PPC970 has the same recommended sequence, so we do the same thing
there too.

This also fixes a bug in the kernel stack overflow handling code on
32-bit, since it was causing a value that we needed in a register to
get trashed.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We found that when the 'decrementer' is saved, the PPE saves the current
time 'csa->suspend_time'. When restoring the 'decrementer', (Step 34)
decrementer seems to be adjusted with the number of cycles th= at a spu
thread has not been running.

In that code it is missing a substract ('-') because 'delta_time' is
assigned a not substracted(see bellow).
Acked-by: NMark Nutter <mnutter@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Compile the 32bit kernel with -mcpu=powerpc. This reduces the imagesize
when a compiler is used that defaults to -mtune=power4. It inserts lots
of nops to please the 64bit cpu instruction scheduling. But all these nops
are not needed for 32bit kernels.

Example with SLES10 gcc 4.1.0 and arch/powerpc/configs/pmac32_defconfig:

                    vmlinux  vmlinux.strip  vmlinux.gz
 -O2                4980515     4187528      1846829
 -Os                4618801     3827084      1673333
 -O2 -mcpu=powerpc  4738851     3945868      1816253
 -Os -mcpu=powerpc  4532785     3741068      1664688
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Repeated calls to eeh_remove_device() can result in multiple
(and thus unbalanced) calls to pci_dev_put(). Make sure the
pci_device_put() is called only once (since there was only
one call to the matching pci_device_get()).
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In e8222502 the detection of machine types
in prom_init broke for some machines. We should be checking /device_type
instead of /model. This should make Power3 and Power4 boot again. Haven't
been able to test this.  We also need to relocate before comparing.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix __initcall return in proc_rtas_init and rtas_init.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Since external and decrementer interrupts set the runlatch on, we need
to ensure its set off again in the idle loop. At the moment we dont turn
it off in the inner loop.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Basically an in-kernel implementation of tee, which uses splice and the
pipe buffers as an intelligent way to pass data around by reference.

Where the user space tee consumes the input and produces a stdout and
file output, this syscall merely duplicates the data inside a pipe to
another pipe. No data is copied, the output just grabs a reference to the
input pipe data.
Signed-off-by: NJens Axboe <axboe@suse.de>

Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for
each arch.  Its definition is sometimes configurable.  Indeed, ia64 defines 5
NODES_SHIFT values in the current git tree.  But it looks a bit messy.

SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has
been changeable by config.  Suitable node's number may be changed in the
future even if it is other architecture.  So, I wrote configurable node's
number.

This patch set defines just default value for each arch which needs multi
nodes except ia64.  But, it is easy to change to configurable if necessary.

On ia64 the number of nodes can be already configured in generic ia64 and SN2
config.  But, NODES_SHIFT is defined for DIG64 and HP'S machine too.  So, I
changed it so that all platforms can be configured via CONFIG_NODES_SHIFT.  It
would be simpler.

See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch removing _machine and converting platforms over to use
define_machine wasn't complete as far as CHRP was concerned.  This
adds the define_machine call for CHRP and gets it booting again.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The iSeries Hypervisor only allows us to specify IRQ numbers up to 255 (it
has a u8 field to pass it in).  This patch allows platforms to specify a
maximum to the virtual IRQ numbers we will use and has iSeries set that
to 255.  If not set, the maximum is NR_IRQS - 1 (as before).
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

We have a strncasecmp so we might as well export it
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

(We'd only added the number, which meant that actually trying
to use splice just went off into la-la-land)
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since the powerpc 64k pages patch went in, systems that have SLBs
(like Power4 iSeries) needed to have slb_initialize called to set up
some variables for the SLB miss handler.  This was not being called
on the boot processor on iSeries, so on single cpu iSeries machines,
we would get apparent memory curruption as soon as we entered user mode.

This patch fixes that by calling slb_initialize on the boot cpu if the
processor has an SLB.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

Missing include for __NR_syscalls, and missing sys_splice() that
causes build-time failure due to compile-time bounds check on
spu_syscall_table.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This comment exceeded my bad spelling threshold :)
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch removes unnecessary exports, marks functions as static when
possible, and simplifies some list-related code.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes several problems with the lparcfg code.  In case
someone gets a sense of deja-vu, part of this was submitted last Sep, I
thought the changes went in, but either got backed out, or just got
lost.

First, change the local_buffer declaration to be unsigned char *.  We
had a bad-math problem in a 2.4 tree which was built with a
"-fsigned-char" parm.  I dont believe we ever build with that parm
now-a-days, but to be safe, I'd prefer the declaration be explicit.

Second, fix a bad math calculation for splpar_strlen.

Third, on the rtas_call for get-system-parameter, pass in
RTAS_DATA_BUF_SIZE for the rtas_data_buf size, instead of letting random
data determine the size.   Until recently, we've had a sufficiently
large 'random data' value get passed in, so the function just happens to
have worked OK.   Now it's getting passed a '0', which causes the
rtas_call to return success, but no data shows up in the buffer.
(oops!).   This was found by the LTC test org.

This is in a branch of code that only gets run on SPLPAR systems.
Tested on power5 Lpar.
Signed-off-by: NWill Schmidt <willschm@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The recent patch to print device names in EEH reset messages
was lacking ... this patch works better.
Signed-off-by: NLinas Vepstas <linas@linas.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This extends the HCALL interface for InfiniBand usage. I've
made the patch against the linux-2.6 git tree and Segher's patch:
[PATCH] Change H_StudlyCaps to H_SHOUTING_CAPS

We moved this into the common powerpc code based on comments we
got after posting the first eHCA InfiniBand device driver patch.
Signed-off-by: NHeiko j Schick <schickhj@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>