According to RFC3530 we're supposed to cache the change attribute
 at the time the client receives a write delegation.
 If the inode is clean, a CB_GETATTR callback by the server to the
 client is supposed to return the cached change attribute.
 If, OTOH, the inode is dirty, the client should bump the cached
 change attribute by 1.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ...and avoid calling set_page_dirty on them
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 The SuS states that a call to write() will cause mtime to be updated on
 the file. In order to satisfy that requirement, we need to flush out
 any cached writes in nfs_getattr().
 Speed things up slightly by not committing the writes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Most NFS server implementations allow up to 64KB reads and writes on the
 wire.  The Solaris NFS server allows up to a megabyte, for instance.

 Now the Linux NFS client supports transfer sizes up to 1MB, too.  This will
 help reduce protocol and context switch overhead on read/write intensive NFS
 workloads, and support larger atomic read and write operations on servers
 that support them.

 Test-plan:
 Connectathon and iozone on mount point with wsize=rsize>32768 over TCP.
 Tests with NFS over UDP to verify the maximum RPC payload size cap.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 To help NFS users and server developers, make the "inode number mismatch"
 message display more useful information.

 Test-plan:
 None.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 nfs_statfs() generates a log message when GETATTR returns an error.  This
 is usually a useless message.  Make it a dprintk.

 Test plan:
 None
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Minor cleanup:  inlined bit ops in nfs_page.h can be simpler.

 Test plan:
 Write-intensive workload against a server that requires COMMITs.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Red Hat found a problem in the error recovery logic in __init_nfs.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Replace ad hoc write parameter sanity checking in nfs_file_direct_write()
 with a call to generic_write_checks().  This should make the proper checks
 modulo the O_LARGEFILE flag, and should catch NFSv2-specific limitations by
 virtue of i_sb->s_maxbytes.

 Test plan:
 Posix compliance testing with both NFSv2 and NFSv3.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Use a cred from the nfs4_client->cl_state_owners list.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 In RFC3530, the RENEW operation is allowed to use either

 the same principal, RPC security flavour and (if RPCSEC_GSS), the same
  mechanism and service that was used for SETCLIENTID_CONFIRM

 OR

 Any principal, RPC security flavour and service combination that
 currently has an OPEN file on the server.

 Choose the latter since that doesn't require us to keep credentials for
 the same principal for the entire duration of the mount.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Convert private implementations in NFSv4 state recovery and delegation
 code to use kthreads.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Use wait_on_bit() when waiting for state recovery to complete.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Cut down on the number of unnecessary RENEW requests on the wire.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to
 interrupt RPC calls too (as per the Solaris implementation).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 In order to allow users to interrupt/cancel it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Get rid of some unnecessary intermediate structures
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 When recovering from a delegation recall or a network partition, we need
 to replay open(O_RDWR), open(O_RDONLY) and open(O_WRONLY) separately.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 A closer reading of RFC3530 reveals that OPEN_DOWNGRADE must always
 specify a access modes that have been the argument of a previous OPEN
 operation.
 IOW: doing OPEN(O_RDWR) and then OPEN_DOWNGRADE(O_WRONLY) is forbidden
 unless the user called OPEN(O_WRONLY)

 In order to fix that, we really need to track the three possible open
 states separately.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 OPEN is a stateful operation, so we must ensure that it always
 completes. In order to allow users to interrupt the operation,
 we need to make the RPC call asynchronous, and then wait on
 completion (or cancel).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Cleanup in preparation for making OPEN calls interruptible by the user.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 The NFSv4 model requires us to complete all RPC calls that might
 establish state on the server whether or not the user wants to
 interrupt it. We may also need to schedule new work (including
 new RPC calls) in order to cancel the new state.

 The asynchronous RPC model will allow us to ensure that RPC calls
 always complete, but in order to allow for "synchronous" RPC, we
 want to add the ability to wait for completion.
 The waits are, of course, interruptible.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Shrink the RPC task structure. Instead of storing separate pointers
 for task->tk_exit and task->tk_release, put them in a structure.

 Also pass the user data pointer as a parameter instead of passing it via
 task->tk_calldata. This enables us to nest callbacks.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Ensure that we always initiate flushing of data before we exit
 a single-page ->writepage() call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 NFS needs to be able to distinguish between single-page ->writepage() calls and
 multipage ->writepages() calls.

 For the single-page writepage calls NFS can kick off the I/O within the
 context of ->writepage().

 For multipage ->writepages calls, nfs_writepage() will leave the I/O pending
 and nfs_writepages() will kick off the I/O when it all has been queued up
 within NFS.

 Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Manual fixup for merge with Jens' "Suspend support for libata", commit
ID 9b847548.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This was harmless, but for the case of a device that had no irq
pre-defined we would incorrectly suggest that "usepirqmask" might make a
difference.  It never would, and the message was just confusing people.

Reported in the dmesg of Etienne Lorrain.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds suspend patch to libata, and ata_piix in particular. For
most low level drivers, they should just need to add the 4 hooks to
work. As I can only test ata_piix, I didn't enable it for more
though.

Suspend support is the single most important feature on a notebook, and
most new notebooks have sata drives. It's quite embarrassing that we
_still_ do not support this. Right now, it's perfectly possible to
suspend the drive in mid-transfer.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Also export current (average) speed and status in sysfs.
Signed-off-by: NNeil Brown <neilb@suse.de>
Acked-by: NGreg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Writing major:minor to md/new_dev will bind that device to the array.
Signed-off-by: NNeil Brown <neilb@suse.de>
Acked-by: NGreg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>