- 18 2月, 2009 36 次提交
-
-
由 Hannes Reinecke 提交于
blk_abort_queue() iterates the timeout list and aborts each request on the list, but if the driver error handling readds a request to the timeout list during this processing, we could be looping forever. Fix this by splicing current entries to a local list and run over that list instead. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Neil Brown 提交于
Hi Tejun, it looks like your commit: block: don't depend on consecutive minor space f331c029 broke a particular case for booting from partitioned md/raid devices. That is the second time this has been broken recently. The previous time was fixed by block: do_mounts - accept root=<non-existant partition> 30f2f0eb Because the data isn't available when an md device is first created (we add disks and set it up after creation), the initial partition scan finds nothing. It is not until the device is opened that another partition scan happens and finds something. So at the point where the kernel parameter "root=/dev/md_d0p1" is being parsed, md_d0 exists, but md_d0p1 does not. However if we let blk_lookup_devt return the correct device number even though the device doesn't exist, then the attempt to mount it will successfully find the partition. I have tried in the past to find a way to get the partition table to be read as soon as the array is assembled but that proved impossible (at the time). I don't remember the details, and could possibly revisit it. However it would be really nice if blk_lookup_devt could be adjusted to again accept non existant partitions. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
The above commit added WRITE_SYNC and switched various places to using that for committing writes that will be waited upon immediately after submission. However, this causes a performance regression with AS and CFQ for ext3 at least, since sync_dirty_buffer() will submit some writes with WRITE_SYNC while ext3 has sumitted others dependent writes without the sync flag set. This causes excessive anticipation/idling in the IO scheduler because sync and async writes get interleaved, causing a big performance regression for the below test case (which is meant to simulate sqlite like behaviour). ---- test case ---- int main(int argc, char **argv) { int fdes, i; FILE *fp; struct timeval start; struct timeval end; struct timeval res; gettimeofday(&start, NULL); for (i=0; i<ROWS; i++) { fp = fopen("test_file", "a"); fprintf(fp, "Some Text Data\n"); fdes = fileno(fp); fsync(fdes); fclose(fp); } gettimeofday(&end, NULL); timersub(&end, &start, &res); fprintf(stdout, "time to write %d lines is %ld(msec)\n", ROWS, (res.tv_sec*1000000 + res.tv_usec)/1000); return 0; } ------------------- Thanks to Sean.White@APCC.com for tracking down this performance regression and providing a test case. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Chip Coldwell 提交于
The kexec kernel resets the CCISS hardware in three steps: 1. Use PCI power management states to reset the controller in the kexec kernel. 2. Clear the MSI/MSI-X bits in PCI configuration space so that MSI initialization in the kexec kernel doesn't fail. 3. Use the CCISS "No-op" message to determine when the controller firmware has recovered from the PCI PM reset. [akpm@linux-foundation.org: cleanups] Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Roel Kluin 提交于
&&/|| confusion Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Subhash Peddamallu 提交于
When freeing from bio pool use right ptr to account for bs->front_pad, instead of bio ptr, Signed-off-by: NSubhash Peddamallu <subhash.peddamallu@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Boaz Harrosh 提交于
When submitting requests via SG_IO, which does a sync io, a bsg_command is not allocated. So an in-Kernel sense_buffer was not set. However when calling blk_execute_rq() with no sense buffer one is provided from the stack. Now bsg at blk_complete_sgv4_hdr_rq() would check if rq->sense_len and a sense was requested by sg_io_v4 the rq->sense was copy_user() back, but by now it is already mangled stack memory. I have fixed that by forcing a sense_buffer when calling bsg_map_hdr(). The bsg_command->sense is provided in the write/read path like before, and on-the-stack buffer is provided when doing SG_IO. I have also fixed a dprintk message to print rq->errors in hex because of the scsi bit-field use of this member. For other block devices it does not matter anyway. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Zlatko Calusic 提交于
Signed-off-by: NZlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-by: NMiles Lane <miles.lane@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: cpu hotplug fix
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: more consistently use clock vs timer
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: doc: mmiotrace.txt, buffer size control change trace: mmiotrace to the tracer menu in Kconfig mmiotrace: count events lost due to not recording
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vm86: fix preemption bug x86, olpc: fix model detection without OFW x86, hpet: fix for LS21 + HPET = boot hang x86: CPA avoid repeated lazy mmu flush x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem x86/cpa: make sure cpa is safe to call in lazy mmu mode x86, ptrace, mm: fix double-free on race
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: iommu: fix Intel IOMMU write-buffer flushing futex: fix reference leak Trivial conflicts fixed manually in drivers/pci/intel-iommu.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/vsx: Fix VSX alignment handler for regs 32-63 powerpc/ps3: Move ps3_mm_add_memory to device_initcall powerpc/mm: Fix numa reserve bootmem page selection powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Documentation: fix minor PCIe HOWTO thinko PCI: fix missing kernel-doc and typos PCI: fix struct pci_platform_pm_ops kernel-doc PCI: fix rom.c kernel-doc warning PCI/MSI: fix msi_mask() shift fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: lrw - Fix big endian support
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: hold trans_mutex when using btrfs_record_root_in_trans Btrfs: make a lockdep class for the extent buffer locks Btrfs: fs/btrfs/volumes.c: remove useless kzalloc Btrfs: remove unused code in split_state() Btrfs: remove btrfs_init_path Btrfs: balance_level checks !child after access Btrfs: Avoid using __GFP_HIGHMEM with slab allocator Btrfs: don't clean old snapshots on sync(1) Btrfs: use larger metadata clusters in ssd mode Btrfs: process mount options on mount -o remount, Btrfs: make sure all pending extent operations are complete
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_nv: give up hardreset on nf2 libata-sff: fix 32-bit PIO ATAPI regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: create the source symlink earlier in the objdir scripts: add x86 64 bit support to the markup_oops.pl script scripts: add x86 register parser to markup_oops.pl kbuild: add sys_* entries for syscalls in tags kbuild: fix tags generation of config symbols bootgraph: fix for use with dot symbols kbuild: add vmlinux to kernel rpm kbuild,setlocalversion: shorten the make time when using svn
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: MAINTAINERS: Switch hdaps to Frank Seidel hwmon: Fix ACPI resource check error handling hwmon: (f71882fg) Hide misleading error message
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10626): ivtv: fix regression in get sliced vbi format V4L/DVB (10625): ivtv: fix decoder crash regression V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time. V4L/DVB (10572): Revert commit dda06a8e V4L/DVB (10533): fix LED status output V4L/DVB (10532): Correction of Stereo detection/setting and signal strength indication V4L/DVB (10527): tuner: fix TUV1236D analog/digital setup V4L/DVB (10516a): zoran: Update MAINTAINERS entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix bus endianity in file2alias HID: move tmff and zpff devices from ignore_list to blacklist HID: unlock properly on error paths in hidraw_ioctl() HID: blacklist Powercom USB UPS
-
git://git.o-hand.com/linux-mfd由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Fix sm501_register_gpio section mismatch mfd: fix sm501 section mismatches mfd: terminate pcf50633 i2c_device_id list mfd: Ensure all WM8350 IRQs are masked at startup mfd: fix htc-egpio iomem resource handling using resource_size mfd: Fix TWL4030 build on some ARM variants mfd: wm8350 tries reaches -1 mfd: Mark WM835x USB_SLV_500MA bit as accessible mfd: Improve diagnostics for WM8350 ID register probe mfd: Initialise WM8350 interrupts earlier mfd: Fix egpio kzalloc return test
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt: fix SMI_EN regression 2
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: wusb: whci-hcd: always lock whc->lock with interrupts disabled
-
由 Roel Kluin 提交于
The macro doesn't expand correctly when its parameter isn't 'pte'. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix NULL dereference in ext4_ext_migrate()'s error handling ext4: Implement range_cyclic in ext4_da_writepages instead of write_cache_pages ext4: Initialize preallocation list_head's properly ext4: Fix lockdep warning ext4: Fix to read empty directory blocks correctly in 64k jbd2: Avoid possible NULL dereference in jbd2_journal_begin_ordered_truncate() Revert "ext4: wait on all pending commits in ext4_sync_fs()" jbd2: Fix return value of jbd2_journal_start_commit()
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Flush volatile msrs before emulating rdmsr KVM: Fix assigned devices circular locking dependency KVM: x86: fix LAPIC pending count calculation KVM: Fix INTx for device assignment KVM: MMU: Map device MMIO as UC in EPT KVM: x86: disable kvmclock on non constant TSC hosts KVM: PIT: fix i8254 pending count read KVM: Fix racy in kvm_free_assigned_irq KVM: Add kvm_arch_sync_events to sync with asynchronize events KVM: mmu_notifiers release method KVM: Avoid using CONFIG_ in userspace visible headers KVM: ia64: fix fp fault/trap handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: cpumask: Use cpu_*_mask accessors code: alpha cpumask: fix powernow-k8: partial revert of 2fdf66b4
-
由 David Woodhouse 提交于
This is the cause of the DMA faults and disk corruption that people have been seeing. Some chipsets neglect to report the RWBF "capability" -- the flag which says that we need to flush the chipset write-buffer when changing the DMA page tables, to ensure that the change is visible to the IOMMU. Override that bit on the affected chipsets, and everything is happy again. Thanks to Chris and Bhavesh and others for helping to debug. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Tested-by: NChris Wright <chrisw@sous-sol.org> Reviewed-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Getting this wrong caused WARNING: at fs/namespace.c:636 mntput_no_expire+0xac/0xf2() due to optimistically checking cpu_writer->mnt outside the spinlock. Here's what we really want: * we know that nobody will set cpu_writer->mnt to mnt from now on * all changes to that sucker are done under cpu_writer->lock * we want the laziest equivalent of spin_lock(&cpu_writer->lock); if (likely(cpu_writer->mnt != mnt)) { spin_unlock(&cpu_writer->lock); continue; } /* do stuff */ that would make sure we won't miss earlier setting of ->mnt done by another CPU. Anyway, for now we just move the spin_lock() earlier and move the test into the properly locked region. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Reported-and-tested-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frank Seidel 提交于
As Rovert Love doesn't any more seem to be realy active on hdaps driver i'll happily take it over. Signed-off-by: NFrank Seidel <frank@f-seidel.de> Cc: Robert Love <rlove@rlove.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
This patch fixes a number of cases where things were not properly cleaned up when acpi_check_resource_conflict() returned an error, causing oopses such as the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=483208Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
If the F71882FG chip is at address 0x4e, then the probe at 0x2e will fail with the following message in the logs: f71882fg: Not a Fintek device This is misleading because there is a Fintek device, just at a different address. So I propose to degrade this message to a debug message. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
- 17 2月, 2009 4 次提交
-
-
由 Hans Verkuil 提交于
The new v4l2_subdev_call used s_fmt instead of g_fmt. Thanks-to: Andy Walls <awalls@radix.net> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The video_ioctl2 conversion of ivtv in kernel 2.6.27 introduced a bug causing decoder commands to crash. The decoder commands should have been handled from the video_ioctl2 default handler, ensuring correct mapping of the argument between user and kernel space. Unfortunately they ended up before the video_ioctl2 call, causing random crashes. Thanks to hannes@linus.priv.at for testing and helping me track down the cause! Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Adam Baker 提交于
If a device using the gspca framework is unplugged while it is still streaming then the call that is used to free the URBs that have been allocated occurs after the pointer it uses becomes invalid at the end of gspca_disconnect. Make another cleanup call in gspca_disconnect while the pointer is still valid (multiple calls are OK as destroy_urbs checks for pointers already being NULL. Signed-off-by: NAdam Baker <linux@baker-net.org.uk> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
On Mon, 02 Feb 2009, Hartmut wrote: This change set is wrong. The affected functions cannot be called from an interrupt context, because they may process large buffers. In this case, interrupts are disabled for a long time. Functions, like dvb_dmx_swfilter_packets(), could be called only from a tasklet. This change set does hide some strong design bugs in dm1105.c and au0828-dvb.c. Please revert this change set and do fix the bugs in dm1105.c and au0828-dvb.c (and other files). On Sun, 15 Feb 2009, Oliver Endriss wrote: This changeset _must_ be reverted! It breaks all kernels since 2.6.27 for applications which use DVB and require a low interrupt latency. It is a very bad idea to call the demuxer to process data buffers with interrupts disabled! On Mon, 16 Feb 2009, Trent Piepho wrote: I agree, this is bad. The demuxer is far too much work to be done with IRQs off. IMHO, even doing it under a spin-lock is excessive. It should be a mutex. Drivers should use a work-queue to feed the demuxer. Thank you for testing this changeset and discovering the issues on it. Cc: Trent Piepho <xyzzy@speakeasy.org> Cc: Hartmut <e9hack@googlemail.com> Cc: Oliver Endriss <o.endriss@gmx.de> Cc: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-