- 08 4月, 2014 1 次提交
-
-
由 Kailang Yang 提交于
Chrome OS was use model name of alc283-dac-wcaps for loading model as default. Change the model name to same as model name of Chrome OS for future support. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2014 1 次提交
-
-
由 Kailang Yang 提交于
It is better to change Mic2-Vref to manual mode. Manual control Mic2-Vref will solve pop noise issue. It will improve pop noise for power on, power off, S3 and resume. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 4月, 2014 2 次提交
-
-
由 Takashi Iwai 提交于
The recent fixups for HP laptops to support the mute LED made the speaker output silent on some machines. It turned out that they use the NID 0x18 for the speaker while it's also used for controlling the LED via VREF bits although the current driver code blindly assumes that such a node is a mic pin (where 0x18 is usually so). This patch fixes the problem by only changing the VREF bits and keeping the other pin ctl bits. Reported-and-tested-by: NHui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
If it only has single output of HP out of machine. The driver parser will copy hp_pins to line_out_pins. hp_pins will empty for alc283_init and alc283_shutup functions. This will cause not have value for hp_pin_sense. Add check line_out_type code will solve it . Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2014 1 次提交
-
-
由 W. Trevor King 提交于
The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: NW. Trevor King <wking@tremily.us> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 3月, 2014 1 次提交
-
-
由 Hui Wang 提交于
When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x10280632; VID: 0x10ec0293, SID: 0x1028062c; VID: 0x10ec0293, SID: 0x1028062e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 3月, 2014 3 次提交
-
-
由 Kailang Yang 提交于
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
When the power state of ALC283 codec goes to D3 or return back to D0, it gives a noise via headphone output. To follow the depop procedure, it will be better. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71861Signed-off-by: NKailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 3月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Lenovo IdeaPad 410Y with ALC282 codec makes loud click noises at boot and shutdown. Also, it wrongly misdetects the acpi_thinkpad hook. This patch adds a device-specific fixup for disabling the shutup callback that is the cause of the click noise and also avoiding the thinpad_helper calls. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71511Reported-and-tested-by: NGuilherme Amadio <guilherme.amadio@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 3月, 2014 1 次提交
-
-
由 Hui Wang 提交于
When plugging a headphone or headset, lots of noise is heard from internal speaker, after changing the automute via amp instead of pinctl, the noise disappears. BugLink: https://bugs.launchpad.net/bugs/1268468 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 3月, 2014 2 次提交
-
-
由 Kailang Yang 提交于
This quirk is needed for the headset microphone to work. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Marius Knaust 提交于
Signed-off-by: NMarius Knaust <marius.knaust@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 2月, 2014 1 次提交
-
-
由 Kailang Yang 提交于
I lost this SSID. Add it into the fixup table. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 2月, 2014 2 次提交
-
-
由 Takashi Iwai 提交于
Use dev_err() and co for messages from HD-audio controller and codec drivers. The codec drivers are mostly bound with codec objects, so some helper macros, codec_err(), codec_info(), etc, are provided. They merely wrap the corresponding dev_xxx(). There are a few places still calling snd_printk() and its variants as they are called without the codec or device context. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The GPIO line used for the mute LED control on Lenovo Yxx0 laptops is cleared unexpectedly when the codec goes to D3, typically by power-saving. For avoiding it, add a power filter in the fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 2月, 2014 1 次提交
-
-
由 Kailang Yang 提交于
More HP machine need mute led support. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 2月, 2014 1 次提交
-
-
由 Hui Wang 提交于
When we plug a 3-ring headset on the Dell machines (Vendor ID: 0x10ec0255, Subsystem ID: 0x10280657; Vendor ID: 0x10ec0255, Subsystem ID: 0x1028065f), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: NCyrus Lien <cyrus.lien@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Realtek codec driver contains some codes referring to the PCI subdevice IDs, but most of them are optional, typically for checking the codec name variants. Add NULL checks appropriately so that it can work without PCI assignment. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2014 1 次提交
-
-
由 Martin Kepplinger 提交于
This reverts commit d3c56568. The reverted commit breaks audio through headphone line out on the Acer TravelMate B113 (Type1Sku0) Notebook, my main work machine. I don't know much about it but this fixes my problem. Bisected and tested. Fixes: d3c56568 ('ALSA: hda/realtek - Avoid invalid COEFs for ALC271X') Cc: <stable@vger.kernel.org> Tested-by: NMartin Kepplinger <martink@posteo.de> Signed-off-by: NMartin Kepplinger <martink@posteo.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Now Realtek and Conexant codec parsers just call snd_hda_gen_free(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 2月, 2014 5 次提交
-
-
由 David Henningsson 提交于
Bug reporter report that the -mode4 makes the subwoofer work. I have simplified the quirk a bit to avoid possible regressions with the microphones. BugLink: https://bugs.launchpad.net/bugs/871808Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Just a small refactoring to make the next patch slightly simpler. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The very same fixup is needed to make the mic on Sony VAIO Pro 11 working as well as VAIO Pro 13 model. Reported-and-tested-by: NHendrik-Jan Heins <hjheins@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
This quirk is needed for the headset microphone to work. Alsa-info at http://www.alsa-project.org/db/?f=8c7dfe857ceff462ca2de133e67023c0f68de9cb Cc: stable@vger.kernel.org (3.10+) Reported-by: NPo-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The current code for controlling mic mute LED in patch_sigmatel.c blindly assumes that there is a single capture switch. But, there can be multiple multiple ones, and each of them flips the state, ended up in an inconsistent state. For fixing this problem, this patch adds kcontrol to be passed to the hook function so that the callee can check which switch is being accessed. In stac_capture_led_hook(), the state is checked as a bitmask, and turns on the LED when all capture switches are off. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 2月, 2014 2 次提交
-
-
由 Takashi Iwai 提交于
Mac Pro 1,1 with ALC889A codec needs the VREF setup on NID 0x18 to VREF50, in order to make the speaker working. The same fixup was already needed for MacBook Air 1,1, so we can reuse it. Reported-by: NNicolai Beuermann <mail@nico-beuermann.de> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
We've seen often problems after suspend/resume on Acer Aspire One AO725 with ALC271X codec as reported in kernel bugzilla, and it turned out that some COEFs doesn't work and triggers the codec communication stall. Since these magic COEF setups are specific to ALC269VB for some PLL configurations, the machine works even without these manual adjustment. So, let's simply avoid applying them for ALC271X. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Lenovo Ideapad with ALC272 has a mute LED that is controlled via GPIO1. Add a simple vmaster hook for it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 1月, 2014 1 次提交
-
-
由 Hui Wang 提交于
When we plug a 3-ring headset on the Dell machine (Vendor ID: 0x10ec0255, Subsystem ID: 0x1028064d), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: NDoro Wu <fan-cheng.wu@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 1月, 2014 1 次提交
-
-
由 Adrien Vergé 提交于
Similarly to other Apple products, MBA 1,1 needs a specific quirk. Pin 0x18 must be set to VREF_50 to have sound output. This was no longer done since commit 1a97b7f2, resulting in a mute built-in speaker. This patch corrects the regression by creating a fixup for the MBA 1,1. Fixes: 1a97b7f2 ("ALSA: hda/realtek - Remove the last static quirks for ALC882") Cc: <stable@vger.kernel.org> [v3.4+] Tested-by: NAdrien Vergé <adrienverge@gmail.com> Signed-off-by: NAdrien Vergé <adrienverge@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 1月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
ASUS Zenbook UX31A has yet another problem -- softer output level than others. According to the measurement, the peak output difference between 31A and 31E is 5dB. As ALC269VB has a COEF for the class-D pre-amp, let's apply it for +5dB. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 1月, 2014 1 次提交
-
-
由 Hui Wang 提交于
When we plug a 3-ring headset on some Dell machines, the headset mic can't be detected, after apply this patch, the headset mic can work well on all those machines. On the machine with the Subsytem ID 0x10280610, if we use ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, the headset mic can be detected and work well, but the sound can't be outputed via headphone anymore, use ALC269_FIXUP_DELL3_MIC_NO_PRESENCE can fix this problem. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: NDavid Chen <david.chen@canonical.com> Tested-by: NCyrus Lien <cyrus.lien@canonical.com> Tested-by: NShawn Wang <shawn.wang@canonical.com> Tested-by: NChih-Hsyuan Ho <chih.ho@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 1月, 2014 1 次提交
-
-
由 Hui Wang 提交于
On some AIO (All In One) models with the codec alc668 (Vendor ID: 0x10ec0668) on it, when we plug a headphone into the jack, the system will switch the output to headphone and set the speaker to automute as well as change the speaker Pin-ctls from 0x40 to 0x00, this will bring loud noise to the headphone. I tried to disable the corresponding EAPD, but it did not help to eliminate the noise. According to Takashi's suggestion, we use amp operation to replace the pinctl modification for the automute, this really eliminate the noise. BugLink: https://bugs.launchpad.net/bugs/1268468 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 1月, 2014 2 次提交
-
-
由 Takashi Iwai 提交于
Both patch_realtek.c and patch_conexant.c contain the fairy same code snippet for supporting Thinkpad ACPI LED controls. Split them into thinkpad_helper.c and include it from both places. Although this isn't the best approach from the code size POV, the probability for coexistence of both Realtek and Conexant codecs on a single machine is pretty low, thus it'll end up with less memory footprint than splitting to yet another module. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 1月, 2014 1 次提交
-
-
由 David Henningsson 提交于
This motherboard seems to have a flaky jack detection - when the front HP is not present, the jack state quickly switches on and off. This has been reported by three people in the bug, so I doubt it's a user error this time. BugLink: https://bugs.launchpad.net/bugs/1248116Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 12月, 2013 2 次提交
-
-
由 David Henningsson 提交于
In this case, there are two DACs, and DAC 0x03 is mono. In order to make headphones and front speaker use DAC 0x02, and subwoofer use DAC 0x03, we artificially cut the connection from nodes 0x14 and 0x15 to node 0x03, so they can only use DAC 0x02. In addition, the 5460 and 5470 differs in the sense that 5470 also needs a headset mic patch, whereas 5460 has individual detection for headphone and headset mic. BugLink: https://bugs.launchpad.net/bugs/1211920Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lv Zheng 提交于
CONFIG_ACPI dependent code should include <linux/acpi.h> instead of directly including <acpi/acpi.h>. This patch cleans up such wrong inclusions for Thinkpad ACPI users. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 12月, 2013 1 次提交
-
-
由 Hui Wang 提交于
On the Dell machines with codec whose Subsystem Id is 0x10280640, no external microphone can be detected when plugging a 3-ring headset. Using ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix this problem. The codec (Vendor ID: 0x10ec0255) on the machine belongs to alc_269 family. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-