scrub_setup_recheck_block() have many arguments but most of them
can be get from one of them, we can remove them to make code clean.
Some other cleanup for that function also included in this patch.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The code are similar, combine them to make code clean and easy to maintenance.
Some lost condition are also completed with benefit of this combination.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Btrfs: Separate finding-right-mirror and writing-to-target's process in scrub_handle_errored_block()

In corrent code, code of finding-right-mirror and writing-to-target
are mixed in logic, if we find a right mirror but failed in writing
to target, it will treat as "hadn't found right block", and fill the
target with sblock_bad.

Actually, "failed in writing to target" does not mean "source
block is wrong", this patch separate above two condition in logic,
and do some cleanup to make code clean.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Use break instead of useless loop should be more suitable in this
case.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

1: Remove no-need DEFINE_WAIT(wait)
2: Add likely() for BTRFS_FS_STATE_DEV_REPLACING condition
3: Use while loop instead of goto
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

It is always 1 in this place, because !1 case was already jumped
out in previous code.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

if (sctx->is_dev_replace && !is_metadata && !have_csum) {
    ...
    goto nodatasum_case;
}
...
nodatasum_case:
    WARN_ON(sctx->is_dev_replace);

In above code, nodatasum_case marker should be moved after
WARN_ON().
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

1: ref_count is simple than current RBIO_HOLD_BBIO_MAP_BIT flag
   to keep btrfs_bio's memory in raid56 recovery implement.
2: free function for bbio will make code clean and flexible, plus
   forced data type checking in compile.

Changelog v1->v2:
 Rename following by David Sterba's suggestion:
 put_btrfs_bio() -> btrfs_put_bio()
 get_btrfs_bio() -> btrfs_get_bio()
 bbio->ref_count -> bbio->refs
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

It can make code more simple and clear, we need not care about
free bbio and raid_map together.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

It can avoid complex calculation of real stripes in sort,
moreover, we can clean up code of sorting tgtdev_map because it
will be in order initially.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

We add the number of stripes on target devices into bbio->num_stripes
if we are under device replacement, and we just sort the raid_map of
those stripes that not on the target devices, so if when we need
real raid_map, we need skip the stripes on the target devices.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

If we have an inode with a large number of hard links, some of which may
be extrefs, turn a regular ref into an extref, fsync the inode and then
replay the fsync log (after a crash/reboot), we can endup with an fsync
log that makes the replay code always fail with -EOVERFLOW when processing
the inode's references.

This is easy to reproduce with the test case I made for xfstests. Its steps
are the following:

   _scratch_mkfs "-O extref" >> $seqres.full 2>&1
   _init_flakey
   _mount_flakey

   # Create a test file with 3001 hard links. This number is large enough to
   # make btrfs start using extrefs at some point even if the fs has the maximum
   # possible leaf/node size (64Kb).
   echo "hello world" > $SCRATCH_MNT/foo
   for i in `seq 1 3000`; do
       ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i`
   done

   # Make sure all metadata and data are durably persisted.
   sync

   # Now remove one link, add a new one with a new name, add another new one with
   # the same name as the one we just removed and fsync the inode.
   rm -f $SCRATCH_MNT/foo_link_0001
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_0001
   rm -f $SCRATCH_MNT/foo_link_0002
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3002
   ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3003
   $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

   # Simulate a crash/power loss. This makes sure the next mount
   # will see an fsync log and will replay that log.

   _load_flakey_table $FLAKEY_DROP_WRITES
   _unmount_flakey

   _load_flakey_table $FLAKEY_ALLOW_WRITES
   _mount_flakey

   # Check that the number of hard links is correct, we are able to remove all
   # the hard links and read the file's data. This is just to verify we don't
   # get stale file handle errors (due to dangling directory index entries that
   # point to inodes that no longer exist).
   echo "Link count: $(stat --format=%h $SCRATCH_MNT/foo)"
   [ -f $SCRATCH_MNT/foo ] || echo "Link foo is missing"
   for ((i = 1; i <= 3003; i++)); do
       name=foo_link_`printf "%04d" $i`
       if [ $i -eq 2 ]; then
           [ -f $SCRATCH_MNT/$name ] && echo "Link $name found"
       else
           [ -f $SCRATCH_MNT/$name ] || echo "Link $name is missing"
       fi
   done
   rm -f $SCRATCH_MNT/foo_link_*
   cat $SCRATCH_MNT/foo
   rm -f $SCRATCH_MNT/foo

   status=0
   exit

The fix is simply to correct the overflow condition when overwriting a
reference item because it was wrong, trying to increase the item in the
fs/subvol tree by an impossible amount. Also ensure that we don't insert
one normal ref and one ext ref for the same dentry - this happened because
processing a dir index entry from the parent in the log happened when
the normal ref item was full, which made the logic insert an extref and
later when the normal ref had enough room, it would be inserted again
when processing the ref item from the child inode in the log.

This issue has been present since the introduction of the extrefs feature
(2012).

A test case for xfstests follows soon. This test only passes if the previous
patch titled "Btrfs: fix fsync when extend references are added to an inode"
is applied too.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

If we added an extended reference to an inode and fsync'ed it, the log
replay code would make our inode have an incorrect link count, which
was lower then the expected/correct count.
This resulted in stale directory index entries after deleting some of
the hard links, and any access to the dangling directory entries resulted
in -ESTALE errors because the entries pointed to inode items that don't
exist anymore.

This is easy to reproduce with the test case I made for xfstests, and
the bulk of that test is:

    _scratch_mkfs "-O extref" >> $seqres.full 2>&1
    _init_flakey
    _mount_flakey

    # Create a test file with 3001 hard links. This number is large enough to
    # make btrfs start using extrefs at some point even if the fs has the maximum
    # possible leaf/node size (64Kb).
    echo "hello world" > $SCRATCH_MNT/foo
    for i in `seq 1 3000`; do
        ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i`
    done

    # Make sure all metadata and data are durably persisted.
    sync

    # Add one more link to the inode that ends up being a btrfs extref and fsync
    # the inode.
    ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001
    $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

    # Simulate a crash/power loss. This makes sure the next mount
    # will see an fsync log and will replay that log.

    _load_flakey_table $FLAKEY_DROP_WRITES
    _unmount_flakey

    _load_flakey_table $FLAKEY_ALLOW_WRITES
    _mount_flakey

    # Now after the fsync log replay btrfs left our inode with a wrong link count N,
    # which was smaller than the correct link count M (N < M).
    # So after removing N hard links, the remaining M - N directory entries were
    # still visible to user space but it was impossible to do anything with them
    # because they pointed to an inode that didn't exist anymore. This resulted in
    # stale file handle errors (-ESTALE) when accessing those dentries for example.
    #
    # So remove all hard links except the first one and then attempt to read the
    # file, to verify we don't get an -ESTALE error when accessing the inodel
    #
    # The btrfs fsck tool also detected the incorrect inode link count and it
    # reported an error message like the following:
    #
    # root 5 inode 257 errors 2001, no inode item, link count wrong
    #   unresolved ref dir 256 index 2978 namelen 13 name foo_link_2976 filetype 1 errors 4, no inode ref
    #
    # The fstests framework automatically calls fsck after a test is run, so we
    # don't need to call fsck explicitly here.

    rm -f $SCRATCH_MNT/foo_link_*
    cat $SCRATCH_MNT/foo

    status=0
    exit

So make sure an fsync always flushes the delayed inode item, so that the
fsync log contains it (needed in order to trigger the link count fixup
code) and fix the extref counting function, which always return -ENOENT
to its caller (and made it assume there were always 0 extrefs).

This issue has been present since the introduction of the extrefs feature
(2012).

A test case for xfstests follows soon.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

If we have an inode (file) with a link count greater than 1, remove
one of its hard links, fsync the inode, power fail/crash and then
replay the fsync log on the next mount, we end up getting the parent
directory's metadata inconsistent - its i_size still reflects the
deleted hard link and has dangling index entries (with no matching
inode reference entries). This prevents the directory from ever being
deletable, as its i_size can never decrease to BTRFS_EMPTY_DIR_SIZE
even if all of its children inodes are deleted, and the dangling index
entries can never be removed (as they point to an inode that does not
exist anymore).

This is easy to reproduce with the following excerpt from the test case
for xfstests that I just made:

    _scratch_mkfs >> $seqres.full 2>&1

    _init_flakey
    _mount_flakey

    # Create a test file with 2 hard links in the same directory.
    mkdir -p $SCRATCH_MNT/a/b
    echo "hello world" > $SCRATCH_MNT/a/b/foo
    ln $SCRATCH_MNT/a/b/foo $SCRATCH_MNT/a/b/bar

    # Make sure all metadata and data are durably persisted.
    sync

    # Now remove one of the hard links and fsync the inode.
    rm -f $SCRATCH_MNT/a/b/bar
    $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a/b/foo

    # Simulate a crash/power loss. This makes sure the next mount
    # will see an fsync log and will replay that log.

    _load_flakey_table $FLAKEY_DROP_WRITES
    _unmount_flakey

    _load_flakey_table $FLAKEY_ALLOW_WRITES
    _mount_flakey

    # Remove the last hard link of the file and attempt to remove its parent
    # directory - this failed in btrfs because the fsync log and replay code
    # didn't decrement the parent directory's i_size and left dangling directory
    # index entries - this made the btrfs rmdir implementation always fail with
    # the error -ENOTEMPTY.
    #
    # The dangling directory index entries were visible to user space, but it was
    # impossible to do anything on them (unlink, open, read, write, stat, etc)
    # because the inode they pointed to did not exist anymore.
    #
    # The parent directory's metadata inconsistency (stale index entries) was
    # also detected by btrfs' fsck tool, which is run automatically by the fstests
    # framework when the test finishes. The error message reported by fsck was:
    #
    # root 5 inode 259 errors 2001, no inode item, link count wrong
    #   unresolved ref dir 258 index 3 namelen 3 name bar filetype 1 errors 4, no inode ref
    #
    rm -f $SCRATCH_MNT/a/b/*
    rmdir $SCRATCH_MNT/a/b
    rmdir $SCRATCH_MNT/a

To fix this just make sure that after an unlink, if the inode is fsync'ed,
he parent inode is fully logged in the fsync log.

A test case for xfstests follows soon.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Very often our extent buffer's header generation doesn't match the current
transaction's id or it is also referenced by other trees (snapshots), so
we don't need the corresponding block group cache object. Therefore only
search for it if we are going to use it, so we avoid an unnecessary search
in the block groups rbtree (and acquiring and releasing its spinlock).

Freeing a tree block is performed when COWing or deleting a node/leaf,
which implies we are holding the node/leaf's parent node lock, therefore
reducing the amount of time spent when freeing a tree block helps reducing
the amount of time we are holding the parent node's lock.

For example, for a run of xfstests/generic/083, the block group cache
object was needed only 682 times for a total of 226691 calls to free
a tree block.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Currently there's a 4B hole in the structure between refs and state and there
are only 16 bits used so we can make it unsigned. This will get a better
packing and may save some stack space for local variables.

The size of extent_state gets reduced by 8B and there are usually a lot
of slab objects.

struct extent_state {
	u64                        start;                /*     0     8 */
	u64                        end;                  /*     8     8 */
	struct rb_node             rb_node;              /*    16    24 */
	wait_queue_head_t          wq;                   /*    40    24 */
	/* --- cacheline 1 boundary (64 bytes) --- */
	atomic_t                   refs;                 /*    64     4 */

	/* XXX 4 bytes hole, try to pack */

	long unsigned int          state;                /*    72     8 */
	u64                        private;              /*    80     8 */

	/* size: 88, cachelines: 2, members: 7 */
	/* sum members: 84, holes: 1, sum holes: 4 */
	/* last cacheline: 24 bytes */
};
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

This has been confusing people for too long, the message is really just
informative.

CC: <stable@vger.kernel.org> # 3.10+
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

The errors are worth noting and might get missed with INFO level.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

All error conditions from open_ctree shall be ERR. Warning would
suggest that something's wrong and we can continue.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Several messages that point to some internal problem, level INFO is
wrong here.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

We were incorrectly detecting when the target key didn't exist anymore
after releasing the path and re-searching the tree. This could make
us split or duplicate (btrfs_split_item() and btrfs_duplicate_item()
are its only callers at the moment) an item when we should not.

For the case of duplicating an item, we currently only duplicate
checksum items (csum tree) and file extent items (fs/subvol trees).
For the checksum items we end up overriding the item completely,
but for file extent items we update only some of their fields in
the copy (done in __btrfs_drop_extents), which means we can end up
having a logical corruption for some values.

Also for the case where we duplicate a file extent item it will make
us produce a leaf with a wrong key order, as btrfs_duplicate_item()
advances us to the next slot and then its caller sets a smaller key
on the new item at that slot (like in __btrfs_drop_extents() e.g.).
Alternatively if the tree search in setup_leaf_for_split() leaves
with path->slots[0] == btrfs_header_nritems(path->nodes[0]), we end
up accessing beyond the leaf's end (when we check if the item's size
has changed) and make our caller insert an item at the invalid slot
btrfs_header_nritems(path->nodes[0]) + 1, causing an invalid memory
access if the leaf is full or nearly full.

This issue has been present since the introduction of this function
in 2009:

    Btrfs: Add btrfs_duplicate_item
    commit ad48fd75Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Merge branch 'cleanup/blocksize-diet-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus

Merge branch 'fix/find-item-path-leak' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus

Currently any time we try to update the block groups on disk we will walk _all_
block groups and check for the ->dirty flag to see if it is set.  This function
can get called several times during a commit.  So if you have several terabytes
of data you will be a very sad panda as we will loop through _all_ of the block
groups several times, which makes the commit take a while which slows down the
rest of the file system operations.

This patch introduces a dirty list for the block groups that we get added to
when we dirty the block group for the first time.  Then we simply update any
block groups that have been dirtied since the last time we called
btrfs_write_dirty_block_groups.  This allows us to clean up how we write the
free space cache out so it is much cleaner.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

I've been overloading root->dirty_list to keep track of dirty roots and which
roots need to have their commit roots switched at transaction commit time.  This
could cause us to lose an update to the root which could corrupt the file
system.  To fix this use a state bit to know if the root is dirty, and if it
isn't set we go ahead and move the root to the dirty list.  This way if we
re-dirty the root after adding it to the switch_commit list we make sure to
update it.  This also makes it so that the extent root is always the last root
on the dirty list to try and keep the amount of churn down at this point in the
commit.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Pull ARM SoC fixes from Olof Johansson:
 "We've been sitting on our fixes branch for a while, so this batch is
  unfortunately on the large side.

  A lot of these are tweaks and fixes to device trees, fixing various
  bugs around clocks, reg ranges, etc.  There's also a few defconfig
  updates (which are on the late side, no more of those).

  All in all the diffstat is bigger than ideal at this time, but nothing
  in here seems particularly risky"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  reset: sunxi: fix spinlock initialization
  ARM: dts: disable CCI on exynos5420 based arndale-octa
  drivers: bus: check cci device tree node status
  ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
  ARM: nomadik: fix up leftover device tree pins
  ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
  ARM: at91/dt: sam9263: Add missing clocks to lcdc node
  ARM: at91: sama5d3: dt: correct the sound route
  ARM: at91/dt: sama5d4: fix the timer reg length
  ARM: exynos_defconfig: Enable LM90 driver
  ARM: exynos_defconfig: Enable options for display panel support
  arm: dts: Use pmu_system_controller phandle for dp phy
  ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
  ARM: dts: berlin: correct BG2Q's SM GPIO location.
  ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
  ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
  ARM: dts: Revert disabling of smc91x for n900
  ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
  ARM: dts: dra7-evm: fix qspi device tree partition size
  ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
  ...

Pull clock driver fixes from Mike Turquette:
 "Small number of fixes for clock drivers and a single null pointer
  dereference fix in the framework core code.

  The driver fixes vary from fixing section mismatch warnings to
  preventing machines from hanging (and preventing developers from
  crying)"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: fix possible null pointer dereference
  Revert "clk: ppc-corenet: Fix Section mismatch warning"
  clk: rockchip: fix deadlock possibility in cpuclk
  clk: berlin: bg2q: remove non-exist "smemc" gate clock
  clk: at91: keep slow clk enabled to prevent system hang
  clk: rockchip: fix rk3288 cpuclk core dividers
  clk: rockchip: fix rk3066 pll lock bit location
  clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
  clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host

Pull SCSI fixes from James Bottomley:
 "This is one fix for a Multiqueue sleeping in invalid context problem
  and a MAINTAINER file update for Qlogic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ->queue_rq can't sleep
  MAINTAINERS: Update maintainer list for qla4xxx

The commit 646cafc6 (clk: Change clk_ops->determine_rate to
return a clk_hw as the best parent) opens a possibility for
null pointer dereference, fix this.
Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

This reverts commit da788acb.

That commit tried to fix the section mismatch warning by moving the
ppc_corenet_clk_driver struct to init section. This is definitely wrong
because the kernel would free the memories occupied by this struct
after boot while this driver is still registered in the driver core.
The kernel would panic when accessing this driver struct.

Cc: stable@vger.kernel.org # 3.17
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Lockdep reported a possible deadlock between the cpuclk lock and for example
the i2c driver.

       CPU0                    CPU1
       ----                    ----
  lock(clk_lock);
                               local_irq_disable();
                               lock(&(&i2c->lock)->rlock);
                               lock(clk_lock);
  <Interrupt>
    lock(&(&i2c->lock)->rlock);

 *** DEADLOCK ***

The generic clock-types of the core ccf already use spin_lock_irqsave when
touching clock registers, so do the same for the cpuclk.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: removed initialization of "flags"]

Pull dmaengine fixes from Vinod Koul:
 "Two patches, the first by Andy to fix dw dmac runtime pm and second
  one by me to fix the dmaengine headers in MAINTAINERS"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: balance PM runtime calls
  MAINTAINERS: dmaengine: fix the header file for dmaengine

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also two PMU driver fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools powerpc: Use dwfl_report_elf() instead of offline.
  perf tools: Fix segfault for symbol annotation on TUI
  perf test: Fix dwarf unwind using libunwind.
  perf tools: Avoid build splat for syscall numbers with uclibc
  perf tools: Elide strlcpy warning with uclibc
  perf tools: Fix statfs.f_type data type mismatch build error with uclibc
  tools: Remove bitops/hweight usage of bits in tools/perf
  perf machine: Fix __machine__findnew_thread() error path
  perf tools: Fix building error in x86_64 when dwarf unwind is on
  perf probe: Propagate error code when write(2) failed
  perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM
  perf/rapl: Fix sysfs_show() initialization for RAPL PMU

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  - Fix segfault when using both the map symtab viewer and annotation
    in the TUI (Namhyung Kim).

  - uClibc build fixes (Alexey Brodkin, Vineet Gupta).

  - bitops/hweight were moved from tools/perf/ too tools/include, move
    some leftovers (Arnaldo Carvalho de Melo)

  - Fix dwarf unwind x86_64 build error (Namhyung Kim)

  - Fix __machine__findnew_thread() error path (Namhyung Kim)

  - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim)

  - Use dwfl_report_elf() instead of offline in powerpc bits to
    properly handle non prelinked DSOs (Sukadev Bhattiprolu).

  - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

Merge "Samsung fixes for v3.19" from Kukjin Kim:

Samsung fixes for v3.19
- exynos_defconfig: enable LM90 driver and display panel support
   - HWMON
   - SENSORS_LM90
   - Direct Rendering Manager (DRM)
   - DRM bridge registration and lookup framework
   - Parade ps8622/ps8625 eDP/LVDS bridge
   - NXP ptn3460 eDP/LVDS bridge
   - Exynos Fully Interactive Mobile Display controller (FIMD)
   - Panel registration and lookup framework
   - Simple panels
   - Backlight & LCD device support

- use pmu_system_controller phandle for dp phy
  : DP PHY requires pmu_system_controller to handle PMU reg. now

* tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: exynos_defconfig: Enable LM90 driver
  ARM: exynos_defconfig: Enable options for display panel support
  arm: dts: Use pmu_system_controller phandle for dp phy
Signed-off-by: NOlof Johansson <olof@lixom.net>

Call spin_lock_init() before the spinlocks are used, both in early init
and probe functions preventing a lockdep splat.

I have been observing lockdep complaining [1] during boot on my a80 optimus [2]
when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat,
and has been tested on a few other sunxi platforms without issue.

[1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html
[2] http://kernelci.org/boot/?a80-optimusSigned-off-by: NTyler Baker <tyler.baker@linaro.org>
Cc: <stable@vger.kernel.org>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:

Renesas ARM Based SoC Fixes for v3.19

This pull request is based on the last round of SoC updates for v3.19,
Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as
renesas-soc3-for-v3.19, merged into your next/soc branch and included in
v3.19-rc1.

- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds

  Set .control_parent for all irqpin instances for sh73a0 SoC when booting
  using legacy C.

- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds

  This fixes a long standing problem which has been present since
  the sh73a0 SoC started using the INTC External IRQ pin driver.

  The patch that introduced the problem is 341eb546 ("ARM:
  shmobile: INTC External IRQ pin driver on sh73a0") which was included
  in v3.10.

* tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
  ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds