- 28 3月, 2008 16 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Extract hash function for pneigh entries from pneigh_lookup(), __pneigh_lookup() and pneigh_delete() as pneigh_hash(). Extract core of pneigh_lookup() and __pneigh_lookup() as __pneigh_lookup_1(). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Ilpo Järvinen 提交于
With a was number of callsites sctp_add_cmd_sf wrapper bloats kernel by some amount. Due to unlikely tracking allyesconfig, with the initial result were around ~7kB (thus caught my attention) while a non-debug config produced only ~2.3kB effect. I (ij) proposed first a patch to uninline it but Vlad responded with a patch that removed the only sctp_add_cmd call which is wrapped by sctp_add_cmd_sf (I wasn't sure if I could do that). I did minor cleanup to Vlad's patch. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Allyesconfig (v2.6.24-mm1): -10976 209 funcs, 123 +, 11099 -, diff: -10976 --- skb_trim Without number of debug related CONFIGs (v2.6.25-rc2-mm1): -7360 192 funcs, 131 +, 7491 -, diff: -7360 --- skb_trim skb_trim | +42 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Codiff stats (allyesconfig, v2.6.24-mm1): -16420 187 funcs, 103 +, 16523 -, diff: -16420 --- dst_release Without number of debug related CONFIGs (v2.6.25-rc2-mm1): -7257 186 funcs, 70 +, 7327 -, diff: -7257 --- dst_release dst_release | +40 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Allyesconfig (v2.6.24-mm1): -21593 356 funcs, 2418 +, 24011 -, diff: -21593 --- skb_push Without many debug related CONFIGs (v2.6.25-rc2-mm1): -13890 341 funcs, 189 +, 14079 -, diff: -13890 --- skb_push skb_push | +46 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Allyesconfig (v2.6.24-mm1): -23668 392 funcs, 104 +, 23772 -, diff: -23668 --- dev_alloc_skb Without many debug CONFIGs (v2.6.25-rc2-mm1): -12178 382 funcs, 157 +, 12335 -, diff: -12178 --- dev_alloc_skb dev_alloc_skb | +37 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Allyesconfig (v2.6.24-mm1): -28162 354 funcs, 3005 +, 31167 -, diff: -28162 --- skb_pull Without number of debug related CONFIGs (v2.6.25-rc2-mm1): -9697 338 funcs, 221 +, 9918 -, diff: -9697 --- skb_pull skb_pull | +44 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Allyesconfig (v2.6.24-mm1): ~500 files changed ... 869 funcs, 198 +, 111003 -, diff: -110805 --- skb_put skb_put | +104 Without number of debug related CONFIGs (v2.6.25-rc2-mm1): -60744 855 funcs, 861 +, 61605 -, diff: -60744 --- skb_put skb_put | +57 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
This elliminates infamous race during module loading when one could lookup proc entry without proc_fops assigned. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
ESP does not account for the IV size when calling pskb_may_pull() to ensure everything it accesses directly is within the linear part of a potential fragment. This results in a BUG() being triggered when the both the IPv4 and IPv6 ESP stack is fed with an skb where the first fragment ends between the end of the esp header and the end of the IV. This bug was found by Dirk Nehring <dnehring@gmx.net> . Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This patch reorders some fields in various structures to have less padding within the structures, making them smaller. It doesn't yet make any type adjustments, but often size_t is used for example for IE lengths which is total overkill since size_t will be 8 bytes long on 64-bit yet the length can at most fill a u8. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch alters the A-MPDU MLME in sta_info to use dynamic allocation, thus drastically improving memory usage - from a constant ~2 Kbyte in the previous (static) allocation to a lower limit of ~200 Byte and an upper limit of ~2 Kbyte. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch makes ieee80211_get_channel a static inline defined in cfg80211's header file which simply calls __ieee80211_get_channel to avoid symbol clashes with the ieee80211 code. The problem was pointed out by David Miller, thanks! Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch eliminate the use of buf_size as a trigger in favor of a new flag to control Rx A-MPDU sessions through debugfs Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Otherwise, 'iwconfig wlan0 key off' with no key set results in: Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; No such file or directory. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 3月, 2008 7 次提交
-
-
由 Benjamin Thery 提交于
Make /proc/net/ip6_flowlabel show only flow labels belonging to the current network namespace. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
This patch introduces a new member, fl_net, in struct ip6_flowlabel. This allows to create labels with the same value in different namespaces. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
Make use of the network namespace information to have this protocol to handle several network namespace. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The IPv6 BEET output function is incorrectly including the inner header in the payload to be protected. This causes a crash as the packet doesn't actually have that many bytes for a second header. The IPv4 BEET output on the other hand is broken when it comes to handling an inner IPv6 header since it always assumes an inner IPv4 header. This patch fixes both by making sure that neither BEET output function touches the inner header at all. All access is now done through the protocol-independent cb structure. Two new attributes are added to make this work, the IP header length and the IPv4 option length. They're filled in by the inner mode's output function. Thanks to Joakim Koskela for finding this problem. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The commits f3db4851 ([NETNS][IPV6] ip6_fib - fib6_clean_all handle several network namespaces) and 69ddb805 ([NETNS][IPV6] route6 - Make proc entry /proc/net/rt6_stats per namespace) made some proc files per net. Both of them introduced potential OOPS - get_proc_net can return NULL, but this check is lost - and a struct net leak - in case single_open() fails the previously got net is not put. Kill all these bugs with one patch. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch eliminates an unnecessary poll-related routine by merging it into TIPC's main polling routine, and updates the comments associated with this code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Currently each vlan_groupd contains 8 pointers on arrays with 512 pointers on struct net_device each :) Such a construction "in many cases ... wastes memory". My proposal is to allow for some of these arrays pointers be NULL, meaning that there are no devices in it. When a new device is added to the vlan_group, the appropriate array is allocated. The check in vlan_group_get_device's is safe, since the pointer vg->vlan_devices_arrays[x] can only switch from NULL to not-NULL. The vlan_group_prealloc_vid() is guarded with rtnl lock and is also safe. I've checked (I hope that) all the places, that use these arrays and found, that the register_vlan_dev is the only place, that can put a vlan device on an empty vlan_group. Rough calculations shows, that after the patch a setup with a single vlan dev (or up to 512 vlans with sequential vids) will occupy approximately 8 times less memory. The question I have is - does this patch makes sense, or a totally new structures are required to store the vlan_devs? Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
- 26 3月, 2008 17 次提交
-
-
由 Pavel Emelyanov 提交于
Commit 8b7817f3 ([IPSEC]: Add ICMP host relookup support) introduced some dst leaks on error paths: the rt pointer can be forgotten to be put. Fix it bu going to a proper label. Found after net namespace's lo refused to unregister :) Many thanks to Den for valuable help during debugging. Herbert pointed out, that xfrm_lookup() will put the rtable in case of error itself, so the first goto fix is redundant. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert P. J. Day 提交于
Given that there are no apparent calls to lock_kernel() or unlock_kernel() under net/ax25, delete the TODO reference related to that. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
SIOCADDMULTI/SIOCDELMULTI check whether the driver has a set_multicast_list method to determine whether it supports multicast. Drivers implementing secondary unicast support use set_rx_mode however. Check for both dev->set_multicast_mode and dev->set_rx_mode to determine multicast capabilities. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This mostly re-uses the net, used in icmp netnsization patches from Denis. After this ICMP sysctls are completely virtualized. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Add some flesh to ipv4_sysctl_init_net and ipv4_sysctl_exit_net, i.e. copy the table, alter .data pointers and register it per-net. Other ipv4_table's sysctls are now global, but this is going to change once sysctl permissions patches migrate from -mm tree to mainline in 2.6.26 merge window :) Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Initialization is moved to icmp_sk_init, all the places, that refer to them use init_net for now. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This includes adding pernet_operations, empty init and exit hooks and a bit of changes in sysctl_ipv4_init just not to have this part in next patches. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It should be a "struct ktermios" not a "struct termios". Based upon a build warning reported by Stephen Rothwell. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Changing these flags requires to use dev_set_allmulti/dev_set_promiscuity or dev_change_flags. Setting it directly causes two unwanted effects: - the next dev_change_flags call will notice a difference between dev->gflags and the actual flags, enable promisc/allmulti mode and incorrectly update dev->gflags - this keeps the underlying device in promisc/allmulti mode until the VLAN device is deleted Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Optimize call routing between NATed endpoints: when an external registrar sends a media description that contains an existing RTP expectation from a different SNATed connection, the gatekeeper is trying to route the call directly between the two endpoints. We assume both endpoints can reach each other directly and "un-NAT" the addresses, which makes the media stream go between the two endpoints directly. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add support for multiple media channels and use it to create expectations for video streams when present. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The SDP connection addresses may be contained in the payload multiple times (in the session description and/or once per media description), currently only the session description is properly updated. Split up SDP mangling so the function setting up expectations only updates the media port, update connection addresses from media descriptions while parsing them and at the end update the session description when the final addresses are known. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Create expectations for the RTCP connections in addition to RTP connections. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Media streams can come from anywhere, add a module parameter which controls whether wildcard expectations or expectations between the two signalling endpoints are created. Since the same media description sent on multiple connections may results in multiple identical expections when using a wildcard source, we need to check whether a similar expectation already exists for a different connection before attempting to register it. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Create expectations for incoming signalling connections when seeing a REGISTER request. This is needed when the registrar uses a different source port number for signalling messages and for receiving incoming calls from other endpoints than the registrar. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-