packet_seq is initialized by both sides of a connection in
drbd_connect().
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

There is no good reason for cmdname() to be an inline function.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Now drbd communication with protocol 100 actually works.
Replaced the remaining p_header80 with p_header where we
no longer know which header it is.

In the places where p_header80 is still in use, it is on
purpose, because we know that it is an old style header
there.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The new header layout will only be used if the peer supports
it of course.

For the first packet and the handshake packet the old (h80)
layout is used for compatibility reasons.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

recv_bm_rle_bits() should not make any assumptions abou the layout
of the packet header
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

sed -i \
       -e 's/mdev->cram_hmac_tfm/mdev->tconn->cram_hmac_tfm/g' \
       -e 's/mdev->integrity_w_tfm/mdev->tconn->integrity_w_tfm/g' \
       -e 's/mdev->integrity_r_tfm/mdev->tconn->integrity_r_tfm/g' \
       -e 's/mdev->int_dig_out/mdev->tconn->int_dig_out/g' \
       -e 's/mdev->int_dig_in/mdev->tconn->int_dig_in/g' \
       -e 's/mdev->int_dig_vv/mdev->tconn->int_dig_vv/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

sed -i \
       -e 's/mdev->req_lock/mdev->tconn->req_lock/g' \
       -e 's/mdev->unused_spare_tle/mdev->tconn->unused_spare_tle/g' \
       -e 's/mdev->newest_tle/mdev->tconn->newest_tle/g' \
       -e 's/mdev->oldest_tle/mdev->tconn->oldest_tle/g' \
       -e 's/mdev->out_of_sequence_requests/mdev->tconn->out_of_sequence_requests/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

sed -i \
       -e 's/mdev->agreed_pro_version/mdev->tconn->agreed_pro_version/g' \
       -e 's/mdev->last_received/mdev->tconn->last_received/g' \
       -e 's/mdev->ko_count/mdev->tconn->ko_count/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Patch mostly:
sed -i -e 's/mdev->receiver/mdev->tconn->receiver/g' \
       -e 's/mdev->worker/mdev->tconn->worker/g' \
       -e 's/mdev->asender/mdev->tconn->asender/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Patch mostly:

sed -i -e 's/mdev->data/mdev->tconn->data/g' \
       -e 's/mdev->meta/mdev->tconn->meta/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Patch partly generated by:

sed -i -e 's/get_net_conf(mdev)/get_net_conf(mdev->tconn)/g' \
       -e 's/put_net_conf(mdev)/put_net_conf(mdev->tconn)/g' \
       -e 's/get_net_conf(odev)/get_net_conf(odev->tconn)/g' \
       -e 's/put_net_conf(odev)/put_net_conf(odev->tconn)/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Besides moving the struct member, everything else is generated by:

sed -i -e 's/mdev->net_conf/mdev->tconn->net_conf/g' \
       -e 's/odev->net_conf/odev->tconn->net_conf/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Starting to dissolve the network connection from the actual
block devices.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The open_cnt check is an open-coded D_ASSERT() check.

In case the data.work queue is not empty, it does not really help to
know which drbd_work elements remained on that list: they will be freed
immediately afterwards, anyway.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Remove the file name and line number from the syslog messages generated:
we have no duplicate function names, and no function contains the same
assertion more than once.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

We do not do collision detection for read requests, but we still need to
look up the request objects when we receive a package over the network.
Using the same data structure for read and write requests results in
simpler code once the tl_hash and app_reads_hash tables are removed.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Factor out duplicate code in got_NegAck().
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Get rid of the ar_id_to_req() and ack_id_to_req() wrappers.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Unify the ar_id_to_req() and ack_id_to_req() functions: make both fail
if the consistency check fails.  Move the request lookup code now
duplicated in both functions into its own function.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Move _ar_id_to_req() to drbd_receiver.c and mark it non-inline.  Remove
the leading underscores from _ar_id_to_req() and _ack_id_to_req().  Mark
ar_hash_slot() inline.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

This is the only place where this function is used.  Make it static.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The ID_VACANT definition has become entirely irrelevant by now.

The is_syncer_block_id() macro does not improve the code, so eliminated
it.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Converting the constants happens at compile time.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Converting the constants happens at compile time.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>