- 13 12月, 2013 24 次提交
-
-
由 Jon Cooper 提交于
The EF10 firmware can optionally insert RX timestamps in the packet prefix. These only include the clock minor value. We must also enable periodic time sync events on each event queue which provide the high bits of the clock value. [bwh: Combined and rebased several changes. Added the above description and some sanity checks for inline vs separate timestamps. Changed efx_rx_skb_attach_timestamp() to read the packet prefix from the skb head area.] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We can potentially pull the entire packet contents into the head area and then free the page it was in. In order to read an inline timestamp safely, we need to copy the prefix into the head area as well. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Daniel Pieczko 提交于
I added efx_ptp_get_mode() to avoid moving the definition for efx_ptp_data, since the current PTP mode is needed for siena.c:siena_set_ptp_hwtstamp. [bwh: Also move the rx_filters mask, and add kernel-doc] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Laurence Evans 提交于
The clock minor tick on the SFC9100 family is 2^-27 s, not 1 ns. There are also various pipeline delays which we need to correct for when interpreting timestamps. We query the firmware for the clock format and corrections at run-time. [bwh: Combined and rebased several changes] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Laurence Evans 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Laurence Evans 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We'll be sharing clocks between multiple functions with their own MAC addresses. The name field is now documented as 'A short "friendly name" to identify the clock ...' and '... not meant to be a unique id.' So use the name 'sfc'. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We need a dedicated channel on Siena to ensure we can match up the separate RX and timestamp events for each PTP packet. We won't do this for EF10 as timestamps are delivered inline. Pass a channel index of 0 to MC_CMD_PTP_OP_ENABLE when there is no dedicated channel. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The MC firmware will return error MC_CMD_ERR_ENOSPC if filter insertion fails due to lack of resources. The net driver's filter implementation for Falcon-architecture returns EBUSY. They should behave consistently, so for EF10 change ENOSPC to EBUSY. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
efx_flush_all() is a really misleading name - it has nothing to do with e.g. flushing DMA queues. Since it's called immediately after efx_stop_port() and is highly dependent on what that does, combine the two functions. Update comments to explain what this is doing a little better. Also update an related and erroneous comment in efx_start_port(). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Edward Cree 提交于
Split each of efx_mcdi_rpc, efx_mcdi_rpc_finish, and efx_mcdi_rpc_async into a normal and a _quiet version; made the former log MCDI errors with netif_err (and include the raw MCDI error code), and the latter never log them at all. Changed various callers; any where some errors are expected (but others are not) call the _quiet version and then if necessary log the MCDI error themselves. Said logging is done by new efx_mcdi_display_error. Callers of efx_mcdi_rpc*_quiet functions which may want to log the error need to ensure that their outbuf is big enough to hold an MCDI error; to this end, they now use MCDI_DECLARE_BUF_OUT_OR_ERR, which always allocates at least 8 bytes. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Edward Cree 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Edward Cree 提交于
Add units to the "Sensor reports condition X for raw value Y" messages. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
We don't directly control RX ingress on Siena or any later controllers, and so we cannot prevent packets from entering the RX datapath while the RX queues are not set up. This results in the hardware incrementing RX_NODESC_DROP_CNT, but it's not an error and we should not include it in error stats. When bringing an interface up or down, pull (or wait for) stats and count the number of packets that were dropped while the interface was down. Subtract this from the reported RX dropped count. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The addition of RX event merging support means we don't reliably detect dropped RX events now. Currently we will only detect them if the previous event for the RX queue had the CONT bit set. Only accept RX completion events as merged if the GET_CAPABILITIES_OUT_RX_BATCHING bit is set in datapath_caps (which it won't be for the low-latency datapath) and the CONT bit is not set on the event. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
To run BISTs the MC goes down in to a special mode where it will only respond to MCDI from the testing PF, and TX, RX and event queues are torn down. Other PFs get a message as it goes down to tell them it's going down. When the other PFs get this message, they check the soft status register to tell when the MC has rebooted after BIST mode and they can start recovery. [bwh: Convert the test result to 1 or -1 as for earlier NICs] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
- 07 12月, 2013 16 次提交
-
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Robert Stonehouse 提交于
The MC firmware is cooperatively multitasking and its scheduler will send an event when a task yields after running for more than the expected maximum time. This can be useful for firmware development but does not usually indicate a serious error and does not help to detect a lockup (there is a hardware watchdog that does that). Change the message and reduce log level accordingly. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Robert Stonehouse 提交于
There is an as-yet unexplained bug that sometimes prevents (or delays) the driver seeing the completion event for a completed MCDI request on the SFC9120. The requested configuration change will have happened but the driver assumes it to have failed, and this can result in further failures. We can mitigate this by polling for completion after unsuccessfully waiting for an event. Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Robert Stonehouse 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Andrew Rybchenko 提交于
rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal to 14 on EF10. So, it should be taken into account if arch requires IP header to be 4-bytes aligned (via NET_IP_ALIGN). Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
There is a single MCDI PTP operation for setting the frequency adjustment and applying a time offset to the hardware clock. When applying a time offset we should not change the frequency adjustment. These two operations can now be requested separately but this requires a flash firmware update. Keep using the single operation, but remember and repeat the previous frequency adjustment. Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Alexandre Rames 提交于
This disables PTP when we bring the interface down to avoid getting unmatched RX timestamp events, and tries to re-enable it when bringing the interface up. [bwh: Make efx_ptp_stop() safe on Falcon. Introduce efx_ptp_{start,stop}_datapath() functions; we'll expand them later.] Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
In case of a flood of PTP packets, the timestamp peripheral and MC firmware on the SFN[56]322F boards may not be able to provide timestamp events for all packets. Don't complain too much about this. Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Laurence Evans 提交于
Limit syslog flood if a PTP packet storm occurs. Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
efx_ptp_is_ptp_tx() must be robust against skbs from raw sockets that have invalid IPv4 and UDP headers. Add checks that: - the transport header has been found - there is enough space between network and transport header offset for an IPv4 header - there is enough space after the transport header offset for a UDP header Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Yijing Wang 提交于
Use PCI standard macro dev_is_pci() instead of hardcoding. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yijing Wang 提交于
Replace local macro DFX_BUS_PCI() with PCI standard macro dev_is_pci(). Acked-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NYijing Wang <wangyijing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Fix spelling errors in tun driver. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Kirsher 提交于
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Paul Mackerras <paulus@samba.org> CC: Ian Campbell <ian.campbell@citrix.com> CC: Wei Liu <wei.liu2@citrix.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Kirsher 提交于
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Oliver Neukum <oliver@neukum.org> CC: Steve Glendinning <steve.glendinning@shawell.net> CC: Oliver Neukum <oneukum@suse.de> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Kirsher 提交于
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-