Oleg noticed that need_migrate_task() doesn't need the ->on_cpu check
now that ttwu() doesn't do remote enqueues for !->on_rq && ->on_cpu,
so remove the helper and replace the single instance with a direct
->on_rq test.
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.556674812@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

Now that we've removed the rq->lock requirement from the first part of
ttwu() and can compute placement without holding any rq->lock, ensure
we execute the second half of ttwu() on the actual cpu we want the
task to run on.

This avoids having to take rq->lock and doing the task enqueue
remotely, saving lots on cacheline transfers.

As measured using: http://oss.oracle.com/~mason/sembench.c

  $ for i in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do echo performance > $i; done
  $ echo 4096 32000 64 128 > /proc/sys/kernel/sem
  $ ./sembench -t 2048 -w 1900 -o 0

  unpatched: run time 30 seconds 647278 worker burns per second
  patched:   run time 30 seconds 816715 worker burns per second
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152729.515897185@chello.nl

Factor our helper functions to make the inner workings of try_to_wake_up()
more obvious, this also allows for adding remote queues.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152729.475848012@chello.nl

The ttwu_post_activation() code does the core wakeup, it sets TASK_RUNNING
and performs wakeup-preemption, so give is a more descriptive name.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152729.434609705@chello.nl

In order to call ttwu_stat() without holding rq->lock we must remove
its rq argument. Since we need to change rq stats, account to the
local rq instead of the task rq, this is safe since we have IRQs
disabled.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152729.394638826@chello.nl

Currently ttwu() does two rq->lock acquisitions, once on the task's
old rq, holding it over the p->state fiddling and load-balance pass.
Then it drops the old rq->lock to acquire the new rq->lock.

By having serialized ttwu(), p->sched_class, p->cpus_allowed with
p->pi_lock, we can now drop the whole first rq->lock acquisition.

The p->pi_lock serializing concurrent ttwu() calls protects p->state,
which we will set to TASK_WAKING to bridge possible p->pi_lock to
rq->lock gaps and serialize set_task_cpu() calls against
task_rq_lock().

The p->pi_lock serialization of p->sched_class allows us to call
scheduling class methods without holding the rq->lock, and the
serialization of p->cpus_allowed allows us to do the load-balancing
bits without races.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152729.354401150@chello.nl

Since we can now call select_task_rq() and set_task_cpu() with only
p->pi_lock held, and sched_exec() load-balancing has always been
optimistic, drop all rq->lock usage.

Oleg also noted that need_migrate_task() will always be true for
current, so don't bother calling that at all.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.314204889@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

Since p->pi_lock now protects all things needed to call
select_task_rq() avoid the double remote rq->lock acquisition and rely
on p->pi_lock.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.273362517@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

In order to be able to call set_task_cpu() while either holding
p->pi_lock or task_rq(p)->lock we need to hold both locks in order to
stabilize task_rq().

This makes task_rq_lock() acquire both locks, and have
__task_rq_lock() validate that p->pi_lock is held. This increases the
locking overhead for most scheduler syscalls but allows reduction of
rq->lock contention for some scheduler hot paths (ttwu).
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.232781355@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

Since we now serialize ttwu() using p->pi_lock, we also need to
serialize ttwu_local() using that, otherwise, once we drop the
rq->lock from ttwu() it can race with ttwu_local().
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152729.192366907@chello.nl

In prepratation of having to call task_contributes_to_load() without
holding rq->lock, we need to store the result until we do and can
update the rq accounting accordingly.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152729.151523907@chello.nl

In order to avoid reading partial updated min_vruntime values on 32bit
implement a seqcount like solution.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.111378493@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

In preparation of calling this without rq->lock held, remove the
dependency on the rq argument.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.071474242@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

In preparation of calling select_task_rq() without rq->lock held, drop
the dependency on the rq argument.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.031077745@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

Currently p->pi_lock already serializes p->sched_class, also put
p->cpus_allowed and try_to_wake_up() under it, this prepares the way
to do the first part of ttwu() without holding rq->lock.

By having p->sched_class and p->cpus_allowed serialized by p->pi_lock,
we prepare the way to call select_task_rq() without holding rq->lock.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152728.990364093@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

Provide a generic p->on_rq because the p->se.on_rq semantics are
unfavourable for lockless wakeups but needed for sched_fair.

In particular, p->on_rq is only cleared when we actually dequeue the
task in schedule() and not on any random dequeue as done by things
like __migrate_task() and __sched_setscheduler().

This also allows us to remove p->se usage from !sched_fair code.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.949545047@chello.nl

Collect all ttwu() stat code into a single function and ensure its
always called for an actual wakeup (changing p->state to
TASK_RUNNING).
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.908177058@chello.nl

try_to_wake_up() would only return a success when it would have to
place a task on a rq, change that to every time we change p->state to
TASK_RUNNING, because that's the real measure of wakeups.

This results in that success is always true for the tracepoints.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.866866929@chello.nl

wq_worker_waking_up() needs to match wq_worker_sleeping(), since the
latter is only called on deactivate, move the former near activate.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/n/top-t3m7n70n9frmv4pv2n5fwmov@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Since we now have p->on_cpu unconditionally available, use it to
re-implement mutex_spin_on_owner.
Requested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.826338173@chello.nl

Always provide p->on_cpu so that we can determine if its on a cpu
without having to lock the rq.
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152728.785452014@chello.nlSigned-off-by: NIngo Molnar <mingo@elte.hu>

For future rework of try_to_wake_up() we'd like to push part of that
function onto the CPU the task is actually going to run on.

In order to do so we need a generic callback from the existing scheduler IPI.

This patch introduces such a generic callback: scheduler_ipi() and
implements it as a NOP.

BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions!
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl

Merge reason: Pick up this upstream commit:

  6631e635: block: don't flush plugged IO on forced preemtion scheduling

As it modifies the scheduler and we'll queue up dependent patches.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  x86 platform drivers: Build fix for intel_pmic_gpio

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6:
  avr32: add ATAG_BOARDINFO
  don't check platform_get_irq's return value against zero
  avr32: init cannot ignore signals sent by force_sig_info()
  avr32: fix deadlock when reading clock list in debugfs
  avr32: Fix .size directive for cpu_enter_idle
  avr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototype
  fix the wrong argument of the functions definition

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits)
  Revert "i915: restore only the mode of this driver on lastclose"
  Revert "ttm: Utilize the DMA API for pages that have TTM_PAGE_FLAG_DMA32 set."
  i915: select VIDEO_OUTPUT_CONTROL for ACPI_VIDEO
  drm/radeon/kms: properly program vddci on evergreen+
  drm/radeon/kms: add voltage type to atom set voltage function
  drm/radeon/kms: fix pcie_p callbacks on btc and cayman
  drm/radeon/kms: fix suspend on rv530 asics
  drm/radeon/kms: clean up gart dummy page handling
  drm/radeon/kms: make radeon i2c put/get bytes less noisy
  drm/radeon/kms: pll tweaks for rv6xx
  drm/radeon: Fix KMS legacy backlight support if CONFIG_BACKLIGHT_CLASS_DEVICE=m.
  radeon: Fix KMS CP writeback on big endian machines.
  i915: restore only the mode of this driver on lastclose
  drm/nvc0: improve vm flush function
  drm/nv50-nvc0: remove some code that doesn't belong here
  drm/nv50: use "nv86" tlb flush method on everything except 0x50/0xac
  drm/nouveau: quirk for XFX GT-240X-YA
  drm/nv50-nvc0: work around an evo channel hang that some people see
  drm/nouveau: implement init table opcode 0x5c
  drm/nouveau: fix oops on unload with disabled LVDS panel
  ...

Fix an incorrect function name so the driver builds.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

We really only want to unplug the pending IO when the process actually
goes to sleep.  So move the test for flushing the plug up to the place
where we actually deactivate the task - where we have properly checked
for preemption and for the process really sleeping.
Acked-by: NJens Axboe <jaxboe@fusionio.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 982134ba ("mm: avoid wrapping vm_pgoff in mremap()") fixed
the case of a expanding mapping causing vm_pgoff wrapping when you used
mremap.  But there was another case where we expand mappings hiding in
plain sight: the automatic stack expansion.

This fixes that case too.

This one also found by Robert Święcki, using his nasty system call
fuzzer tool.  Good job.
Reported-and-tested-by: NRobert Święcki <robert@swiecki.net>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ATAG_BOARDINFO is intended to hand over the information
bd->bi_board_number from u-boot to the kernel.

This piece of information can be used to implement some kind of board
identification while booting the kernel. Therefore it is placed in .initdata
section and can be accessed via the new symbol board_number only while
initializing the kernel.
Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

platform_get_irq returns -ENXIO on failure, so !int_irq was probably
always true.  Better use (int)int_irq <= 0.  Note that a return value of
zero is still handled as error even though this could mean irq0.

This is a followup to 305b3228 that
changed the return value of platform_get_irq from 0 to -ENXIO on error.
Acked-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

We can delete the code that checks to see if we're sending an ignored
signal to init because force_sig_info() already handles this case.
force_sig_info() will kill init even if the signal handler is SIG_DFL
and the scenario described in the comment where init might "generate
the same exception over and over again" cannot occur (force_sig_info()
clears SIGNAL_UNKILLABLE to ensure that init will die).

Also, the use of is_global_init() is not correct in the multhreaded
case, as Oleg Nesterov explains,

	"is_global_init() is not right in theory, /sbin/init can be
	multithreaded. And, this doesn't cover the sub-namespace
	inits... I'd suggest to check SIGNAL_UNKILLABLE, but looking
	closer I think you can simply remove this code."

It seems this code was copied from arch/powerpc in March 2007 in commit

  623b0355 "[AVR32] Clean up exception handling code"

but the code was deleted from arch/powerpc in November 2009 in commit

  a0592d42 "powerpc: kill the obsolete code under is_global_init()"

So catch up with powerpc and delete the bogus code.
Signed-off-by: NMatt Fleming <matt.fleming@linux.intel.com>
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

When writing out /sys/kernel/debug/at32ap_clk, clock list lock is being
held while clk_get() is called. clk_get() attempts to take the same
lock, which results in deadlock. Introduce and call lock free version,
__clk_get(), instead.
Signed-off-by: NOle Henrik Jahren <olehenja@alumni.ntnu.no>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

gas used to accept (and ignore?) .size directives which referred to
undefined symbols, as this does.  In binutils 2.21 these are treated
as errors.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

introduce in commit d75f1bfdSigned-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

The functions of eic_chip's memebers use the wrong argument .
Signed-off-by: NWanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  fix XEN_SAVE_RESTORE Kconfig dependencies
  PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS

This reverts commit 0a0883c8.

this was in my tree by accident, I meant to rebase it out and
didn't realise in time.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit 69a07f0b.

We've tracked a number of problems back to this, and Thomas
thinks we should redesign this for .40/41 anyways so I'm
happy to revert it.
Signed-off-by: NDave Airlie <airlied@redhat.com>