- 13 11月, 2005 5 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a driver for the extra GPIOs found on the Sharp SL-C1000 (Akita). These GPIOs are found on a Maxim MAX7310 I2C i/o expander chip. A generic GPIO driver for the MAX7310 was attempted but this mini driver is a much simpler and much more effective solution avoiding several issues and complexity the generic driver had (as discussed on LKML). The platform device is required so the device parent can be set correctly which ensures the device is one of the last to suspend and first to resume. Whilst the i2c suspend/resume calls can be influenced, nothing guarantees this is easlier/later than the subsystems the gpios are used on which are all independent of i2c (sound, irda, video/backlight etc.). Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a SharpSL PM device driver for the SL-Cxx00 machines. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a SharpSL PM device driver for the SL-C7x0 machines. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Updates to the SharpSL PM driver including cleanups from both Pavel Machek and myself and updates after the platform device changes to make it compile again. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add the core machine support for the Sharp SL-C1000 (Akita) and enable the Kconfig selection for it. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 11 11月, 2005 2 次提交
-
-
由 Liam Girdwood 提交于
Patch from Liam Girdwood This patch allows users of the pxa SSP driver to register their own irq handlers instead of using the default SSP handler. It also cleans up the CKEN clock and irq detection as the values are now stored in a table. This patch replaces 2845/1 Changes:- o Added flags parameter to ssp_init() o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for drivers that want to register their own handler) o Cleaned up clock and irq detection, values are now stored in table. o Added build changes to allow other drivers (e.g audio) to select the ssp driver. o corgi_ssp.c changed to use new interface. Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch adds a power and battery management core driver which with the addition of the right device files, supports the c7x0 and cxx00 series of Sharp Zaurus handhelds. The driver is complex for several reasons. Battery charging is manually monitored and controlled. When suspended, the device needs to periodically partially resume, check the charging status and then re-suspend. It does without bothering the higher linux layers as a full resume and re-suspend is unnecessary. The code is carefully written to avoid interrupts or calling code outside the module under these circumstances. It also vets the various wake up sources and monitors the device's power situation. Hooks to limit the backlight intensity and to notify the battery monitoring code of backlight events are connected/added as the backlight is one of the biggest users of power on the device. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 11月, 2005 1 次提交
-
-
由 Russell King 提交于
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 11月, 2005 4 次提交
-
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Make it completely deterministic and leave nothing to chance (even if it had at worst 0.001% probability of failing). Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dirk Opfer 提交于
Patch from Dirk Opfer This patch updates the tosa machine to use the new SharpSL PCMCIA layer introduced with Patch #3093/1 Depends on #3093/1 Signed-off-by: NDirk Opfer <Dirk@Opfer-Online.de> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie The Sharp SL-Cxx00 models have a combined power control for the SD and CF slot 0. This patch adds hooks to the scoop driver to allow machines to provide a custom control function for this and such a function is added for spitz/akita/borzoi. It also moves the gpio init code into the machine files as this is machine dependent and differs between some models. A couple of warnings when compiling for collie are also fixed. Signed-off-by: Richard Purdie Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dirk Opfer 提交于
Patch from Dirk Opfer This patch adds MMC, IRDA and UDC support to the Sharp SL-6000x device. Also it adds a platform device for the keyboard driver. Signed-off-by: Dirk Opfer Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 11月, 2005 1 次提交
-
-
由 Tim Schmielau 提交于
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 11月, 2005 2 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Update the PXA pm.c file to allow machines (such as the Sharp Zaurus) to override the standard pm functions but reuse/wrap them where needed. The init call is made slightly earlier to give machine code an init level to override them in removing any race. Signed-off-by: Richard Purdie Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dirk Opfer 提交于
Patch from Dirk Opfer This patch adds basic machine support for the Sharp SL-6000x (Tosa) PDAs. Signed-off-by: Dirk Opfer Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 11月, 2005 1 次提交
-
-
由 Todd Poynor 提交于
Patch from Todd Poynor Add platform devices for flash to Lubbock and Mainstone board files. Once in place, the two existing mtd map drivers for the boards will be converted to use a single pxa2xx map driver in the linux-mtd tree. Take 4: flash_platform_data .map_name vs. .name cleaned up, resync with merged irda patch context. Signed-off-by: NTodd Poynor <tpoynor@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 11月, 2005 1 次提交
-
-
由 David Brownell 提交于
Patch from David Brownell Lubbock updates: * Provide an address for the SMC91x chip that doesn't generate a boot-time warning (matching the EEPROM). * Update MMC support to (a) detect card insert/remove, and (b) report the readonly switch setting for SD cards. Previously, MMC/SD cards had to be present at boot time else they couldn't be detected. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 31 10月, 2005 1 次提交
-
-
由 Tim Schmielau 提交于
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 10月, 2005 4 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add spitz irda platform support Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add corgi irda platform support Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add poodle irda platform support Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 10月, 2005 1 次提交
-
-
由 Russell King 提交于
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 10月, 2005 5 次提交
-
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre This is the PXA2xx common IRDA driver, plus platform support for Lubbock and Mainstone. Signed-off-by: NNicolas Pitre <nico@cam.org> Acked-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Matt Reimer 提交于
Patch from Matt Reimer Adds support for HWUART on PXA 255 / 26x. This patch originally came from http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch and has been tweaked by me. Signed-off-by: NMatt Reimer <mreimer@vpop.net> Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Todd Poynor 提交于
Patch from Todd Poynor Add symbols for PXA2xx PWRMODE register M field that selects low-power mode, replace unadorned constants. Honor power mode parameter of pxa_cpu_suspend(mode), no longer force to 3 (sleep). Full Deep Sleep low-power mode support for PXA27x is pending generic PM interfaces to select more than 2 suspend-to-RAM-style power modes, but this is expected soon. This can be hardcoded in the meantime by replacing the pxa_cpu_suspend() parameter value. From David Burrage and Todd Poynor. Try #2 removes one of the register copies and moves the code to save the pxa_cpu_suspend parameter to immediately surround the call that requires the parameter value be preserved. Signed-off-by: NTodd Poynor <tpoynor@mvista.com> Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ian Campbell 提交于
Patch from Ian Campbell As noted by Uli Luckas in the comments of 3025 there is a typo in the i2s platform device. The i2s platform device refers to the i2c resources. Signed-off-by: NIan Campbell <icampbell@arcom.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena PXA map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 10月, 2005 1 次提交
-
-
由 Pavel Machek 提交于
This fixes compile problem when CONFIG_FB_PXA is not set. LD .tmp_vmlinux1 arch/arm/mach-pxa/built-in.o(.text+0x1d74): In function `spitz_get_hsync_len': : undefined reference to `pxafb_get_hsync_time' make: *** [.tmp_vmlinux1] Error 1 3.46user 0.46system 5.10 (0m5.106s) elapsed 77.01%CPU Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 10月, 2005 1 次提交
-
-
由 Matt Reimer 提交于
Patch from Matt Reimer Adds an I2S platform_device for PXA. I2S is used to interface with sound chips on systems like iPAQ h1910/h2200/hx4700 and Asus 716. Signed-off-by: mreimer@vpop.net Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 10月, 2005 3 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Remove a couple of lines of accidently added code causing compile errors. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Update corgi_lcd to use bus_find_device to locate the pxafb device hence fixing a compile error. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a function to allow machines to set the parent of the pxa framebuffer device. This means the power up/down sequence can be controlled where required by the machine. Update spitz to use the new function, fixing a compile error. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 10月, 2005 1 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a missing include from corgi.c Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 29 9月, 2005 2 次提交
-
-
由 Russell King 提交于
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Fix arch/arm/mach-pxa/generic.c:242: warning: 'struct i2c_pxa_platform_data' declared inside parameter list caused by missing asm/arch/i2c.h include. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 9月, 2005 4 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch adds MMC and UDC support to the PXA Poodle platform. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch cleans up the PXA Poodle platform code removing an unneeded static iomap. It also corrects errors in the platform header file and adds a missing GPIO define. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch cleans up the PXA Corgi platform code removing an unneeded static iomap, an unneeded function and some debug messages. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre This apparently fell in the crack somewhere. Add it back. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-