- 11 1月, 2011 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
We need to defer calling perf_evsel_list__delete() till after atexit registered routines, because we need to traverse the events being recorded at that time at least on 'perf record'. This fixes the problem reported by Thomas Renninger where cmd_record called by cmd_timechart would not write the tracing data to the perf.data file header because the evsel_list at atexit (control+C on 'perf timechart record') time would be empty, being already deleted by run_builtin(), and thus 'perf timechart' when trying to process such perf.data file would die with: "no trace data in the file" Problem introduced in 70d544d0. Reported-by: NThomas Renninger <trenn@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
In this if statement: if (head + event->header.size >= mmap_size) { if (mmaps[map_idx]) { munmap(mmaps[map_idx], mmap_size); mmaps[map_idx] = NULL; } page_offset = page_size * (head / page_size); file_offset += page_offset; head -= page_offset; goto remap; } With, for instance, these values: head=2992 event->header.size=48 mmap_size=3040 We end up endlessly looping back to remap. Off by one. Problem introduced in 55b44629. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Reported-by: NIngo Molnar <mingo@elte.hu> Reported-by: NDavid Ahern <daahern@cisco.com> Bisected-by: NDavid Ahern <daahern@cisco.com> Tested-by: NDavid Ahern <daahern@cisco.com> Cc: David Ahern <daahern@cisco.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
And a test for it: [acme@felicio linux]$ perf test 1: vmlinux symtab matches kallsyms: Ok 2: detect open syscall event: Ok 3: detect open syscall event on all cpus: Ok [acme@felicio linux]$ Translating C the test does: 1. generates different number of open syscalls on each CPU by using sched_setaffinity 2. Verifies that the expected number of events is generated on each CPU It works as expected. LKML-Reference: <new-submission> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Pirko 提交于
on ppc64: /usr/include/bits/local_lim.h:#define PTHREAD_STACK_MIN 131072 therefore following set of commands: gives: perf.2.6.37test: builtin-sched.c:493: create_tasks: Assertion `!(err)' failed. So make sure we do not set stack size lower than PTHREAD_STACK_MIN. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110110160417.GB2685@psychotron.brq.redhat.com> Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 1月, 2011 3 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Improve sys_perf_event_open ENOENT return handling in top and record, just like 5a3446bc does for stat. Cc: David Ahern <daahern@cisco.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 David Ahern 提交于
For unsupported events (e.g., H/W events when running in a VM) perf stat currently fails with the error message: Error: open_counter returned with 2 (No such file or directory). /bin/dmesg may provide additional information. Fatal: Not all events could be opened. dmesg is of no help and it is not clear as to why it fails to open the counter. This patch changes the error message to Error: cache-misses event is not supported. Fatal: Not all events could be opened. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: a.p.zijlstra@chello.nl LPU-Reference: <1294597272-17335-1-git-send-email-daahern@cisco.com> Signed-off-by: NDavid Ahern <daahern@cisco.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Bug introduced in ce47dc56. Reported-by: NMike Galbraith <efault@gmx.de> Cc: Chris Samuel <chris@csamuel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 1月, 2011 2 次提交
-
-
由 Ingo Molnar 提交于
Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
-
由 Cyrill Gorcunov 提交于
Don found that P4 PMU reads CCCR register instead of counter itself (in attempt to catch unflagged event) this makes P4 NMI handler to consume all NMIs it observes. So the other NMI users such as kgdb simply have no chance to get NMI on their hands. Side note: at moment there is no way to run nmi-watchdog together with perf tool. This is because both 'perf top' and nmi-watchdog use same event. So while nmi-watchdog reserves one event/counter for own needs there is no room for perf tool left (there is a way to disable nmi-watchdog on boot of course). Ming has tested this patch with the following results | 1. watchdog disabled | | kgdb tests on boot OK | perf works OK | | 2. watchdog enabled, without patch perf-x86-p4-nmi-4 | | kgdb tests on boot hang | | 3. watchdog enabled, without patch perf-x86-p4-nmi-4 and do not run kgdb | tests on boot | | "perf top" partialy works | cpu-cycles no | instructions yes | cache-references no | cache-misses no | branch-instructions no | branch-misses yes | bus-cycles no | | 4. watchdog enabled, with patch perf-x86-p4-nmi-4 applied | | kgdb tests on boot OK | perf does not work, NMI "Dazed and confused" messages show up | Which means we still have problems with p4 box due to 'unknown' nmi happens but at least it should fix kgdb test cases. Reported-by: NJason Wessel <jason.wessel@windriver.com> Reported-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NDon Zickus <dzickus@redhat.com> Acked-by: NLin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4D275E7E.3040903@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 1月, 2011 8 次提交
-
-
由 Jason Baron 提交于
On older gcc (3.3) dynamic debug fails to compile: include/net/inet_connection_sock.h: In function `inet_csk_reset_xmit_timer': include/net/inet_connection_sock.h:236: error: duplicate label declaration `do_printk' include/net/inet_connection_sock.h:219: error: this is a previous declaration include/net/inet_connection_sock.h:236: error: duplicate label declaration `out' include/net/inet_connection_sock.h:219: error: this is a previous declaration include/net/inet_connection_sock.h:236: error: duplicate label `do_printk' include/net/inet_connection_sock.h:236: error: duplicate label `out' Fix, by reverting the usage of JUMP_LABEL() in dynamic debug for now. Cc: <stable@kernel.org> Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Mathieu Desnoyers 提交于
DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting only TRACEPOINTS=y is broken. Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20101028153117.GA4051@Krystal> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Li Zefan 提交于
While running my ftrace stress test, this showed up: BUG: sleeping function called from invalid context at mm/mmap.c:233 ... note: cat[3293] exited with preempt_count 1 The bug was introduced by commit 91e86e56 ("tracing: Fix recursive user stack trace") Cc: <stable@kernel.org> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4D0089AC.1020802@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Lai Jiangshan 提交于
Add __rcu annotation to : (struct tracepoint)->funcs Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4D22D4F1.50505@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Mathieu Desnoyers 提交于
The check for NULL skb in the kfree_skb trace event is a duplicate from the check already done in its only caller, kfree_skb(). Remove this duplicate check. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20110106175319.GA30610@Krystal> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NDavid S. Miller <davem@davemloft.net> CC: Steven Rostedt <rostedt@goodmis.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Thomas Gleixner <tglx@linutronix.de> CC: Zhaolei <zhaolei@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Mathieu Desnoyers 提交于
Add missing comma within the TRACE_EVENT() example in tracepoint.h. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20110106184532.GA2526@Krystal> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
While doing some developing, Peter Zijlstra and I have found that if a CREATE_TRACE_POINTS include is done before module.h is included, it can break the build. We have been lucky so far that this has not broke the build since module.h is included in almost everything. Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Frederic Weisbecker 提交于
From the x86_64 low level interrupt handlers, the frame pointer is saved right after the partial pt_regs frame. rbp is not supposed to be part of the irq partial saved registers, but it only requires to extend the pt_regs frame by 8 bytes to do so, plus a tiny stack offset fixup on irq exit. This changes a bit the semantics or get_irq_entry() that is supposed to provide only the value of caller saved registers and the cpu saved frame. However it's a win for unwinders that can walk through stack frames on top of get_irq_regs() snapshots. A noticeable impact is that it makes perf events cpu-clock and task-clock events based callchains working on x86_64. Let's then save rbp into the irq pt_regs. As a result with: perf record -e cpu-clock perf bench sched messaging perf report --stdio Before: 20.94% perf [kernel.kallsyms] [k] lock_acquire | --- lock_acquire | |--44.01%-- __write_nocancel | |--43.18%-- __read | |--6.08%-- fork | create_worker | |--0.88%-- _dl_fixup | |--0.65%-- do_lookup_x | |--0.53%-- __GI___libc_read --4.67%-- [...] After: 19.23% perf [kernel.kallsyms] [k] __lock_acquire | --- __lock_acquire | |--97.74%-- lock_acquire | | | |--21.82%-- _raw_spin_lock | | | | | |--37.26%-- unix_stream_recvmsg | | | sock_aio_read | | | do_sync_read | | | vfs_read | | | sys_read | | | system_call | | | __read | | | | | |--24.09%-- unix_stream_sendmsg | | | sock_aio_write | | | do_sync_write | | | vfs_write | | | sys_write | | | system_call | | | __write_nocancel v2: Fix cfi annotations. Reported-by: NSoeren Sandmann Pedersen <sandmann@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Jan Beulich <JBeulich@novell.com>
-
- 07 1月, 2011 23 次提交
-
-
由 Rakib Mullick 提交于
In dump_stack function, bp isn't used anymore, which is introduced by commit 9c0729dc. This patch removes bp completely. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> Cc: Soeren Sandmann <sandmann@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <AANLkTik9U_Z0WSZ7YjrykER_pBUfPDdgUUmtYx=R74nL@mail.gmail.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Don Zickus 提交于
Just re-arrange the code a bit to make it easier to follow what is going on. Basically un-negating the if-statement and swapping the code inside the if-statement with code outside. No functional changes. Originally-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
In original NMI handler, NMI reason io port (0x61) is only processed on BSP. This makes it impossible to hot-remove BSP. To solve the issue, a raw spinlock is used to allow the port to be processed on any CPU. Originally-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
They are a handful of places in the code that register a die_notifier as a catch all in case no claims the NMI. Unfortunately, they trigger on events like DIE_NMI and DIE_NMI_IPI, which depending on when they registered may collide with other handlers that have the ability to determine if the NMI is theirs or not. The function unknown_nmi_error() makes one last effort to walk the die_chain when no one else has claimed the NMI before spitting out messages that the NMI is unknown. This is a better spot for these devices to execute any code without colliding with the other handlers. The two drivers modified are only compiled on x86 arches I believe, so they shouldn't be affected by other arches that may not have DIE_NMIUNKNOWN defined. Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: Russ Anderson <rja@sgi.com> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Cc: dann frazier <dannf@hp.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Huang Ying 提交于
Replace the NMI related magic numbers with symbol constants. Memory parity error is only valid for IBM PC-AT, newer machine use bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually reported via MCE. So corresponding function name and kernel log string is changed. But on some machines, PCI SERR line is still used to report memory errors. This is used by EDAC, so corresponding EDAC call is reserved. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
Adds perf_event_time() to try and centralize access to event timing and in particular ctx->time. Prepares for cgroup support. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
Replace all occurrences of: event->cpu != -1 && event->cpu == smp_processor_id() by a call to: event_filter_match(event) This makes the code more consistent and will make the cgroup patch smaller. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
In particular this patch move perf_event_exit_task() before cgroup_exit() to allow for cgroup support. The cgroup_exit() function detaches the cgroups attached to a task. Other movements include hoisting some definitions and inlines at the top of perf_event.c Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Lin Ming 提交于
Since commit 69aad6f1(perf tools: Introduce event selectors), only perf_event_attr::type and ::config are passed to event selector, which makes perf tool not work correctly. For example, PEBS does not work because perf_event_attr::precise_ip is not passed to the syscall. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Frederic Weisbecker 提交于
It seems that some gcc versions build by default with frame pointers and some others omit them. Just build the tools with frame pointers as the callchains can be an important part of the perf workflow. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1294325513-14276-3-git-send-email-fweisbec@gmail.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Han Pingtian 提交于
I found when specifying all tracepoints with -e to one of subcommand, such as 'stat', the program will trigger a buffer overflow error, like this: *** buffer overflow detected ***: ./perf terminated ======= Backtrace: ========= /lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7] .... The tracepoints are separated by comma, something like this: $ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'` The root reason of this problem is that store_event_type() is called for all events, and will overflow the 'filename' at: strncat(filename, orgname, strlen(orgname)); This patch fixes it by calling store_event_type() only when the event name has been found. LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com> Signed-off-by: NHan Pingtian <phan@redhat.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mm: Initialize initial_page_table before paravirt jumps
-
由 Linus Torvalds 提交于
Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, asm: Use fxsaveq/fxrestorq in more places * 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hwmon: Add core threshold notification to therm_throt.c * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, paravirt: Use native_halt on a halt, not native_safe_halt * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: locking, lockdep: Convert sprintf_symbol to %pS * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: Better struct irqaction layout
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV, BAU: Extend for more than 16 cpus per socket x86, UV: Fix the effect of extra bits in the hub nodeid register x86, UV: Add common uv_early_read_mmr() function for reading MMRs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Check tsc available/disabled in the delayed init function x86: Improve TSC calibration using a delayed workqueue x86: Make tsc=reliable override boot time stability checks
-
由 Linus Torvalds 提交于
Merge branch 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: module: Move RO/NX module protection to after ftrace module update x86: Resume trampoline must be executable x86: Add RO/NX protection for loadable kernel modules x86: Add NX protection for kernel data x86: Fix improper large page preservation
-
由 Linus Torvalds 提交于
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, earlyprintk: Move mrst early console to platform/ and fix a typo x86, apbt: Setup affinity for apb timers acting as per-cpu timer ce4100: Add errata fixes for UART on CE4100 x86: platform: Move iris to x86/platform where it belongs x86, mrst: Check platform_device_register() return code x86/platform: Add Eurobraille/Iris power off support x86, mrst: Add explanation for using 1960 as the year offset for vrtc x86, mrst: Fix dependencies of "select INTEL_SCU_IPC" x86, mrst: The shutdown for MRST requires the SCU IPC mechanism x86: Ce4100: Add reboot_fixup() for CE4100 ce4100: Add PCI register emulation for CE4100 x86: Add CE4100 platform support x86: mrst: Set vRTC's IRQ to level trigger type x86: mrst: Add audio driver bindings rtc: Add drivers/rtc/rtc-mrst.c x86: mrst: Add vrtc driver which serves as a wall clock device x86: mrst: Add Moorestown specific reboot/shutdown support x86: mrst: Parse SFI timer table for all timer configs x86/mrst: Add SFI platform device parsing code
-
由 Linus Torvalds 提交于
Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, microcode, AMD: Cleanup code a bit x86, microcode, AMD: Replace vmalloc+memset with vzalloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: apic, amd: Make firmware bug messages more meaningful mce, amd: Remove goto in threshold_create_device() mce, amd: Add helper functions to setup APIC mce, amd: Shorten local variables mci_misc_{hi,lo} mce, amd: Implement mce_threshold_block_init() helper function
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix included-by file reference comments x86, cpu: Only CPU features determine NX capabilities x86, cpu: Call verify_cpu during 32bit CPU startup x86, cpu: Clear XD_DISABLED flag on Intel to regain NX x86, cpu: Rename verify_cpu_64.S to verify_cpu.S
-
由 Linus Torvalds 提交于
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation x86, acpi: Add MAX_LOCAL_APIC for 32bit x86: io_apic: Split setup_ioapic_ids_from_mpc() x86: io_apic: Fix CONFIG_X86_IO_APIC=n breakage x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings() x86: Allow platforms to force enable apic
-