- 16 10月, 2007 14 次提交
-
-
由 Christoph Hellwig 提交于
All flags are added to xfs_mount's m_flag instead. Note that the 32bit inode flag was duplicated in both of them, but only cleared in the mount when it was not nessecary due to the filesystem beeing small enough. Two flags are still required here - one to indicate the mount option setting, and one to indicate if it applies or not. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29507a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
vfs_altfsid was just a pointer to mp->m_fixedfsid so we can trivially replace it with the latter. vfs_fsid also was identical to m_fixedfsid through rather obfuscated ways so we can kill it as well and simply its only user. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29506a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Also remove the now dead behavior code. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29505a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
All vfs ops now take struct xfs_mount pointers and the behaviour related glue is split out into methods of its own. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29504a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Mount options are now parsed by the main XFS module and rejected if quota support is not available, and there are some new quota operation for the quotactl syscall and calls to quote in the mount, unmount and sync callchains. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29503a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Mount options are now parsed by the main XFS module and rejected if dmapi support is not available, and there is a new dm operation to send the mount event. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29502a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
In the next patch we need to look at the mount structure until just before it's freed, so we need to be able to free it as the very last thing in xfs_unmount. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29501a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Now that struct bhv_vnode is empty we can just kill it. Retain bhv_vnode_t as a typedef for struct inode for the time being until all the fallout is cleaned up. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29500a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
It's entirely unused except for ignored arguments in the mrlock initialization, so remove it. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29499a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS inode. Note that this makes the tracing macros rather misnamed, but this kind of fallout will be fixed up incrementally later on. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29498a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
struct bhv_vnode is on it's way out, so move the I/O count to the XFS inode. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29497a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
All flags previously handled at the vnode level are not in the xfs_inode where we already have a flags mechanisms and free bits for flags previously in the vnode. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29495a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
We can easily get at the vfsp through the super_block but it will soon be gone anyway. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29494a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29493a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 15 10月, 2007 10 次提交
-
-
由 Christoph Hellwig 提交于
All vnode ops now take struct xfs_inode pointers and the behaviour related glue is split out into methods of it's own. This required fixing xfs_create/mkdir/symlink to not mess with the inode pointer but rather use a separate boolean for error handling. Thanks to Dave Chinner for that fix. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29492a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 David Chinner 提交于
One of the perpetual scaling problems XFS has is indexing it's incore inodes. We currently uses hashes and the default hash sizes chosen can only ever be a tradeoff between memory consumption and the maximum realistic size of the cache. As a result, anyone who has millions of inodes cached on a filesystem needs to tunes the size of the cache via the ihashsize mount option to allow decent scalability with inode cache operations. A further problem is the separate inode cluster hash, whose size is based on the ihashsize but is smaller, and so under certain conditions (sparse cluster cache population) this can become a limitation long before the inode hash is causing issues. The following patchset removes the inode hash and cluster hash and replaces them with radix trees to avoid the scalability limitations of the hashes. It also reduces the size of the inodes by 3 pointers.... SGI-PV: 969561 SGI-Modid: xfs-linux-melb:xfs-kern:29481a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Kill uio related functions and defines now that they're unused. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29480a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Simplify the readlink code to get rid of the last user of uio. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29479a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Currently xfs has a rather complicated internal scheme to allow for different directory formats in IRIX. This patch rips all code related to this out and pushes useage of the Linux filldir callback into the lowlevel directory code. This does not make the code any less portable because filldir can be used to create dirents of all possible variations (including the IRIX ones as proved by the IRIX binary emulation code under arch/mips/). This patch get rid of an unessecary copy in the readdir path, about 400 lines of code and one of the last two users of the uio structure. This version is updated to deal with dmapi aswell which greatly simplifies the get_dirattrs code. The dmapi part has been tested using the get_dirattrs tools from the xfstest dmapi suite1 with various small and large directories. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29478a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 968690 SGI-Modid: xfs-linux-melb:xfs-kern:29340a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NVlad Apostolov <vapo@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Generally we try not to directly include linux header files in core xfs code; xfs_linux.h is the spot for that. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29326a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Now that nobody's using it, remove xfs_physmem & friends. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29325a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
m_nreadaheads in the mount struct is never used; remove it and the various macros assigned to it. Also remove a couple other unused macros in the same areas. Removes one user of xfs_physmem. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29322a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 David Chinner 提交于
If the underlying block device suddenly stops supporting barriers, we need to handle the -EOPNOTSUPP error in a sane manner rather than shutting down the filesystem. If we get this error, clear the barrier flag, reissue the I/O, and tell the world bad things are occurring. SGI-PV: 964544 SGI-Modid: xfs-linux-melb:xfs-kern:28568a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 18 9月, 2007 1 次提交
-
-
由 Lachlan McIlroy 提交于
SGI-PV: 968767 SGI-Modid: xfs-linux-melb:xfs-kern:29675a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 05 9月, 2007 3 次提交
-
-
由 Christoph Hellwig 提交于
- in xfs_probe_cluster rename the inner len to pg_len. There's no harm here because the outer len isn't used after the inner len comes into existence but it keeps the code clean. - in xfs_da_do_buf remove the inner i because they don't overlap and they are both the same type. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29311a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
We can't return a masked result of a __bitwise type. Compare it to 0 first to keep the behaviour without the warning. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29309a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 David Chinner 提交于
SGI-PV: 968554 SGI-Modid: xfs-linux-melb:xfs-kern:29303a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 27 7月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2007 4 次提交
-
-
由 Paul Mundt 提交于
Slab destructors were no longer supported after Christoph's c59def9f change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nick Piggin 提交于
Change ->fault prototype. We now return an int, which contains VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte. FAULT_RET_ code tells the VM whether a page was found, whether it has been locked, and potentially other things. This is not quite the way he wanted it yet, but that's changed in the next patch (which requires changes to arch code). This means we no longer set VM_CAN_INVALIDATE in the vma in order to say that a page is locked which requires filemap_nopage to go away (because we can no longer remain backward compatible without that flag), but we were going to do that anyway. struct fault_data is renamed to struct vm_fault as Linus asked. address is now a void __user * that we should firmly encourage drivers not to use without really good reason. The page is now returned via a page pointer in the vm_fault struct. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 7月, 2007 1 次提交
-
-
由 David Chinner 提交于
Hook XFS up to ->page_mkwrite to ensure that we know about mmap pages being written to. This allows use to do correct delayed allocation and ENOSPC checking as well as remap unwritten extents so that they get converted correctly during writeback. This is done via the generic block_page_mkwrite code. SGI-PV: 940392 SGI-Modid: xfs-linux-melb:xfs-kern:29149a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 18 7月, 2007 3 次提交
-
-
由 Christoph Hellwig 提交于
currently the export_operation structure and helpers related to it are in fs.h. fs.h is already far too large and there are very few places needing the export bits, so split them off into a separate header. [akpm@linux-foundation.org: fix cifs build] Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
I can never remember what the function to register to receive VM pressure is called. I have to trace down from __alloc_pages() to find it. It's called "set_shrinker()", and it needs Your Help. 1) Don't hide struct shrinker. It contains no magic. 2) Don't allocate "struct shrinker". It's not helpful. 3) Call them "register_shrinker" and "unregister_shrinker". 4) Call the function "shrink" not "shrinker". 5) Reduce the 17 lines of waffly comments to 13, but document it properly. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: David Chinner <dgc@sgi.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 7月, 2007 3 次提交
-
-
由 Michal Marek 提交于
* 32bit struct xfs_fsop_bulkreq has different size and layout of members, no matter the alignment. Move the code out of the #else branch (why was it there in the first place?). Define _32 variants of the ioctl constants. * 32bit struct xfs_bstat is different because of time_t and on i386 because of different padding. Make xfs_bulkstat_one() accept a custom "output formatter" in the private_data argument which takes care of the xfs_bulkstat_one_compat() that takes care of the different layout in the compat case. * i386 struct xfs_inogrp has different padding. Add a similar "output formatter" mecanism to xfs_inumbers(). SGI-PV: 967354 SGI-Modid: xfs-linux-melb:xfs-kern:29102a Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Michal Marek 提交于
32bit struct xfs_fsop_handlereq has different size and offsets (due to pointers). TODO: case XFS_IOC_{FSSETDM,ATTRLIST,ATTRMULTI}_BY_HANDLE still not handled. SGI-PV: 967354 SGI-Modid: xfs-linux-melb:xfs-kern:29101a Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Michal Marek 提交于
i386 struct xfs_fsop_geom_v1 has no padding after the last member, so the size is different. SGI-PV: 967354 SGI-Modid: xfs-linux-melb:xfs-kern:29100a Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-