Enable Marvell Berlin SoC family in arm64 defconfig.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch introduces ARCH_BERLIN to enable Marvell Berlin SoC family in
Kconfig.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

arm: Xilinx ZynqMP dt patches for v4.3

- Add SATA, GPIO, CAN, SMMU, USB, SPI, I2C, watchdog and sdhci for zynqmp
- Sort nodes in dtsi

* tag 'zynqmp-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx:
  ARM64: zynqmp: Move SPI nodes to the right location
  ARM64: zynqmp: Move uart and ttcs to the right location
  ARM64: zynqmp: Enable spi flashes on ep108
  ARM64: zynqmp: Add eeprom memories on i2c bus
  ARM64: zynqmp: Enable sdhci on ep108
  ARM64: zynqmp: Enable watchdog on ep108
  ARM64: zynqmp: Add DWC3 usb support
  ARM64: zynqmp: Add SMMU support
  ARM64: zynqmp: Add CANs node for platform
  ARM64: zynqmp: Use zynqmp specific compatible string for gpio
  devicetree: xilinx: zynqmp: add sata node
Signed-off-by: NOlof Johansson <olof@lixom.net>

Qualcomm ARM64 Updates for v4.3

* Add BLSP and required pinctrl info for MSM8916
* Add SDHC aliases and nodes for MSM8916
* Add USB nodes for MSM8916
* Add APQ8016 SBC specific USB configuration
* Add APQ8016 LED configuration

* tag 'qcom-arm64-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm:
  arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes
  arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions
  arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins
  arm64: dts: qcom: Add msm8916 USB configuration nodes
  arm64: dts: qcom: Add msm8916 sdhci configuration nodes
  arm64: dts: qcom: Add msm8916 BLSP device nodes
  arm64: dts: qcom: Extend msm8916 pinctrl device coverage
Signed-off-by: NOlof Johansson <olof@lixom.net>

Keep nodes sorted.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Sort nodes in DTSI.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Enable spi flashes on ep108.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add i2c eeprom memories on i2c bus.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NShubhrajyoti Datta <shubhraj@xilinx.com>

Enable both sdhcis on ep108.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Enable watchdog on ep108.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add usb nodes to DTSI and enable both of them on ep108.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add SMMU DT node to DTSI.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Also enable can0 for ep108.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

The patch:
"gpio: Added support to Zynq Ultrascale+ MPSoC"
(sha1: bdf7a4ae)
added zynqmp specific features. This patch is switching the driver to
use the zynqmp compatible string.
Also enable the driver for ep108 platform.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

add sata node with sata fixed clock nodes in dtsi file.
enable sata in zynqmp-ep108.dts with broken-gen2.
Signed-off-by: NSuneel Garapati <suneel.garapati@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

The current iProc BCMA front-end driver can only work on ARM32 based
platforms; therefore its config option in Kconfig should be changed to
reflect that. This fixes arm64 allmodconfig build failure when compiling
the the iProc BCMA driver that contains struct pci_sys_data that is
arm32 specific
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add Broadcom NS2 device tree binding document. Also add initial device
tree dtsi for Broadcom North Star 2 (NS2) SoC and board support for NS2
SVK board
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch adds support to Broadcom's iProc family of arm64 based SoCs
in the arm64 Kconfig and defconfig files
Signed-off-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Allow Broadcom iProc PCIe core driver to be compiled for ARM64
Signed-off-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NVikram Prakash <vikramp@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

PCI: iproc: Add arm64 support

Add arm64 support to the iProc PCIe driver.

Note that on arm32, bus->sysdata points to the arm32-specific
pci_sys_data struct, and pci_sys_data.private_data contains the
iproc_pcie pointer. For arm64, there's nothing corresponding to
pci_sys_data, so we keep the iproc_pcie pointer directly in
bus->sysdata.

In addition, arm64 does IRQ mapping in pcibios_add_device(), so it
doesn't need pci_fixup_irqs() as arm32 does.
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

APQ8016 SBC board have 6 user controllable LED's.

Add following devices:

LED1 green LED triggered by system heartbeat.
LED2 green LED triggered by access to eMMC device.
LED3 green LED triggered by access to SD card.
LED4 green LED no trigger assigned.
LED5 yellow LED triggered by access to WLAN.
LED6 blue LED triggered by access to Bluetooth.
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

USB2513B HUB reset line is connected to PMIC GPIO3 not GPIO1.

Fix TC7USB40MU Dual SPDT Switch select input line control, which is
connected to PMIC GPIO4 not GPIO2 and disable the pin. It is not used
for now.

Remove user LEDs definitions, because they clash with above numbers.
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

Hogging pins from pinctrl driver prevents client drivers
to probe.
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

Add Host, Device and OTG configuration nodes.
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

Add sdhci1 and sdhci2 device configuration nodes.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

Add device nodes for SPI1, SPI2, SPI3, I2C4, SPI5, SPI6 and
BAM(DMA) engine connected to them.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

Create separate file for MSM8916 pinctrl default/sleep pins state
definitions. Move in UART2 states and add SPI, I2C and SDC configurations.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

- arm64: dts: mediatek: add mt6795 support
- Document: DT: Add bindings for mediatek MT6795 SoC Platform
- arm64: dts: mediatek: Add MT8173 MMC dts
- arm64: dts: mt8173: Add afe device node
- arm64: dts: mt8173-evb: Add PMIC support
- dts: mt8173-evb: Add da9211 to i2c1
- ARM: dts: mt8173: support arm64 cpuidle-dt
- ARM64: MediaTek MT8173: Add SCPSYS device node
- arm64: dts: mt8173: Add I2C device node
- arm64: dts: mt8173: Add watchdog device node
- arm64: dts: mt8173: Add PMIC wrapper device node
- arm64: dts: mt8173: Use real clock for UARTs
- arm64: dts: mt8173: Add clock controller device nodes

* tag 'v4.2-next-arm64' of https://github.com/mbgg/linux-mediatek:
  arm64: dts: mediatek: add mt6795 support
  Document: DT: Add bindings for mediatek MT6795 SoC Platform
  arm64: dts: mediatek: Add MT8173 MMC dts
  arm64: dts: mt8173: Add afe device node
  arm64: dts: mt8173-evb: Add PMIC support
  dts: mt8173-evb: Add da9211 to i2c1
  ARM: dts: mt8173: support arm64 cpuidle-dt
  ARM64: MediaTek MT8173: Add SCPSYS device node
  arm64: dts: mt8173: Add I2C device node
  arm64: dts: mt8173: Add watchdog device node
  arm64: dts: mt8173: Add PMIC wrapper device node
  arm64: dts: mt8173: Use real clock for UARTs
  arm64: dts: mt8173: Add clock controller device nodes
Signed-off-by: NOlof Johansson <olof@lixom.net>

This adds basic chip support for MT6795 SoC
Signed-off-by: NMars Cheng <mars.cheng@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

This adds DT binding documentation for Mediatek MT6795.
Signed-off-by: NMars Cheng <mars.cheng@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

Add node mmc0 ~ mmc3 for mt8173.dtsi
Add node mmc0, mmc1 for mt8173-evb.dts
Signed-off-by: NChaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: NEddie Huang <eddie.huang@mediatek.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

They're not relative. My builder failed silently and never notified me of the
error. Sigh.
Signed-off-by: NOlof Johansson <olof@lixom.net>

This adds afe (audio front end) device node to the MT8173 dtsi file.
Signed-off-by: NKoro Chen <koro.chen@mediatek.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

In terms of peripherals the rk3368 is quite similar to the rk3288, which
makes it possible to have a lot basic components working in the first go.
More to follow once I tracked down all the tiny differences that still
exist in some parts.

With these dts files, the R88 board is able to boot from an attached
usb device and most likely from its emmc too, if the emmc uses a standard
partition table instead of Rockchip's own one - the emmc itself is
detected correctly.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge in dependent stable branch with clk driver for RK3368, needed for the
dt binding header files.

* depends/clk-rk3368:
  clk: rockchip: add rk3368 clock controller
  clk: rockchip: add missing include guards
  clk: rockchip: add dt-binding header for rk3368
  dt-bindings: add documentation of rk3668 clock controller
  clk: rockchip: define the inverters of rk3066/rk3188 and rk3288
  clk: rockchip: fix issues in the mmc-phase clock
  clk: rockchip: add support for phase inverters
  clk: rockchip: add COMPOSITE_NOGATE_DIVTBL variant
  clk: rockchip: protect register macros against multipart values
  clk: rockchip: fix faulty vip parent name on rk3288
  clk: rockchip: rk3288: add CLK_SET_RATE_PARENT to sclk_mac
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable building Rockchip support in the defconfig.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The rk3368 is Rockchip's first ARM64 soc, build around 8 Cortex-A53 cores.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Let's move out the platform Kconfig entries to a separate file, since these
changes usually get moved through arm-soc instead of the arm64 arch tree, and
this will lead to fewer conflicts
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>

Since ETMv4 driver has been merged, this patch adds ETM nodes for SC9836,
and four funnel input ports to connect with ETM output ports.
Signed-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>