The comment for the deflate test vectors says the winbits parameter is 11,
while the deflate module actually uses -11 (a negative window bits parameter
enables the raw deflate format instead of the zlib format).
Correct this, to avoid confusion about the format used.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ROTATE -> rol32
XOR was always used with the same destination, use ^=
PLUS/PLUSONE use ++ or +=
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

While its a slightly insane to bypass the key1 == key2 ||
key2 == key3 check in triple-des, since it reduces it to the
same strength as des, some folks do need to do this from time
to time for backwards compatibility with des.

My own case is FIPS CAVS test vectors. Many triple-des test
vectors use a single key, replicated 3x. In order to get the
expected results, des3_ede_setkey() needs to only reject weak
keys if the CRYPTO_TFM_REQ_WEAK_KEY flag is set.

Also sets a more appropriate RES flag when a weak key is found.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes sha512 and sha384 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The message schedule W (u64[80]) is too big for the stack. In order
for this algorithm to be used with shash it is moved to a static
percpu area.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes michael_mic to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes wp512, wp384 and wp256 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes tgr192, tgr160 and tgr128 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes sha256 and sha224 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes md5 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes md4 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes sha1 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes rmd320 to the new shash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes rmd256 to the new shash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes rmd160 to the new shash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes rmd128 to the new shash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes digest_null to the new shash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since most cryptographic hash algorithms have no keys, this patch
makes the setkey function optional for ahash and shash.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When self-testing (de)compression algorithms, make sure the actual size of
the (de)compressed output data matches the expected output size.
Otherwise, in case the actual output size would be smaller than the expected
output size, the subsequent buffer compare test would still succeed, and no
error would be reported.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Base versions handle constant folding just fine.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This warning:

  crypto/testmgr.c: In function ‘test_comp’:
  crypto/testmgr.c:829: warning: ‘ret’ may be used uninitialized in this function

triggers because GCC correctly notices that in the ctcount == 0 &&
dtcount != 0 input condition case this function can return an undefined
value, if the second loop fails.

Remove the shadowed 'ret' variable from the second loop that was probably
unintended.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use KM_SOFTIRQ instead of KM_IRQ in tasklet context.
Added bug_on on input no-page condition.
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix queue management. Change ring size and perform its check not
one after another descriptor, but using stored pointers to the last
checked descriptors.
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HIFN uses the transform context to store per-request data, which breaks
when more than one request is outstanding. Move per request members from
struct hifn_context to a new struct hifn_request_context and convert
the code to use this.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ANSI X9.31 PRNG docs aren't particularly clear on how to increment DT,
but empirical testing shows we're incrementing from the wrong end. A 10,000
iteration Monte Carlo RNG test currently winds up not getting the expected
result.

From http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf :

# CAVS 4.3
# ANSI931 MCT
[X9.31]
[AES 128-Key]

COUNT = 0
Key = 9f5b51200bf334b5d82be8c37255c848
DT = 6376bbe52902ba3b67c925fa701f11ac
V = 572c8e76872647977e74fbddc49501d1
R = 48e9bd0d06ee18fbe45790d5c3fc9b73

Currently, we get 0dd08496c4f7178bfa70a2161a79459a after 10000 loops.

Inverting the DT increment routine results in us obtaining the expected result
of 48e9bd0d06ee18fbe45790d5c3fc9b73. Verified on both x86_64 and ppc64.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Selecting CRYPTO_CRC32C is not enough as CRYPTO which CRYPTO_CRC32C
depends on may be disabled.  This patch adds the select on CRYPTO.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

While working with some FIPS RNGVS test vectors yesterday, I discovered a
little bug in the way the ansi_cprng code works right now.

For example, the following test vector (complete with expected result)
from http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf ...

Key = f3b1666d13607242ed061cabb8d46202
DT = e6b3be782a23fa62d71d4afbb0e922fc
V = f0000000000000000000000000000000
R = 88dda456302423e5f69da57e7b95c73a

...when run through ansi_cprng, yields an incorrect R value
of e2afe0d794120103d6e86a2b503bdfaa.

If I load up ansi_cprng w/dbg=1 though, it was fairly obvious what was
going wrong:

----8<----
getting 16 random bytes for context ffff810033fb2b10
Calling _get_more_prng_bytes for context ffff810033fb2b10
Input DT: 00000000: e6 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc 
Input I: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
Input V: 00000000: f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
tmp stage 0: 00000000: e6 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc 
tmp stage 1: 00000000: f4 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84 
tmp stage 2: 00000000: 8c 53 6f 73 a4 1a af d4 20 89 68 f4 58 64 f8 be 
Returning new block for context ffff810033fb2b10
Output DT: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc 
Output I: 00000000: 04 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84 
Output V: 00000000: 48 89 3b 71 bc e4 00 b6 5e 21 ba 37 8a 0a d5 70 
New Random Data: 00000000: 88 dd a4 56 30 24 23 e5 f6 9d a5 7e 7b 95 c7 3a 
Calling _get_more_prng_bytes for context ffff810033fb2b10
Input DT: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc 
Input I: 00000000: 04 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84 
Input V: 00000000: 48 89 3b 71 bc e4 00 b6 5e 21 ba 37 8a 0a d5 70 
tmp stage 0: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc 
tmp stage 1: 00000000: 80 6b 3a 8c 23 ae 8f 53 be 71 4c 16 fc 13 b2 ea 
tmp stage 2: 00000000: 2a 4d e1 2a 0b 58 8e e6 36 b8 9c 0a 26 22 b8 30 
Returning new block for context ffff810033fb2b10
Output DT: 00000000: e8 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc 
Output I: 00000000: c8 e2 01 fd 9f 4a 8f e5 e0 50 f6 21 76 19 67 9a 
Output V: 00000000: ba 98 e3 75 c0 1b 81 8d 03 d6 f8 e2 0c c6 54 4b 
New Random Data: 00000000: e2 af e0 d7 94 12 01 03 d6 e8 6a 2b 50 3b df aa 
returning 16 from get_prng_bytes in context ffff810033fb2b10
----8<----

The expected result is there, in the first "New Random Data", but we're
incorrectly making a second call to _get_more_prng_bytes, due to some checks
that are slightly off, which resulted in our original bytes never being
returned anywhere.

One approach to fixing this would be to alter some byte_count checks in
get_prng_bytes, but it would mean the last DEFAULT_BLK_SZ bytes would be
copied a byte at a time, rather than in a single memcpy, so a slightly more
involved, equally functional, and ultimately more efficient way of fixing this
was suggested to me by Neil, which I'm submitting here. All of the RNGVS ANSI
X9.31 AES128 VST test vectors I've passed through ansi_cprng are now returning
the expected results with this change.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The bnx2x driver actually uses the crc32c_le name so this patch
restores the crc32c_le symbol through a macro.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The latest shash changes leave crc32c undefined:

[...]
Building modules, stage 2.
  MODPOST 1381 modules
  ERROR: "crc32c" [net/sctp/sctp.ko] undefined!
  ERROR: "crc32c" [net/ipv4/netfilter/nf_nat_proto_sctp.ko] undefined!

Adding EXPORT_SYMBOL(crc32c) to lib/libcrc32c.c fixes the compile error.
This patch has been compile-tested only.
Signed-off-by: NAdrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch swaps the role of libcrc32c and crc32c.  Previously
the implementation was in libcrc32c and crc32c was a wrapper.
Now the code is in crc32c and libcrc32c just calls the crypto
layer.

The reason for the change is to tap into the algorithm selection
capability of the crypto API so that optimised implementations
such as the one utilising Intel's CRC32C instruction can be
used where available.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a test for the requirement that all crc32c algorithms
shall store the partial result in the first four bytes of the descriptor
context.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes crc32c-intel to the new shash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes crc32c to the new shash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch allows shash algorithms to be used through the old hash
interface.  This is a transitional measure so we can convert the
underlying algorithms to shash before converting the users across.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes /proc/crypto call the type-specific show function
if one is present before calling the legacy show functions for
cipher/digest/compress.  This allows us to reuse the type values
for those legacy types.  In particular, hash and digest will share
one type value while shash is phased in as the default hash type.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>