In case that there is an unsupported band, the ie will be
unallocated and the free will crash.

Cc: stable@vger.kernel.org
Signed-off-by: NDavid Spinadel <david.spinadel@intel.com>
Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Drivers are not expected to handle it before drv_start has been called. It
will be called again after an interface has been brought up.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The code to allow EAPOL frames even when the station
isn't yet marked associated needs to check that the
incoming frame is long enough and due to paged RX it
also can't assume skb->data contains the right data,
it must use skb_copy_bits(). Fix this to avoid using
data that doesn't really exist.

Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

A number of places in the mesh code don't check that
the frame data is present and in the skb header when
trying to access. Add those checks and the necessary
pskb_may_pull() calls. This prevents accessing data
that doesn't actually exist.

To do this, export ieee80211_get_mesh_hdrlen() to be
able to use it in mac80211.

Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Due to pskb_may_pull() checking the skb length, all
non-management frames are checked on input whether
their 802.11 header is fully present. Also add that
check for management frames and remove a check that
is now duplicate. This prevents accessing skb data
beyond the frame end.

Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The mesh header can have address extension by a 4th
or a 5th and 6th address, but never both. Drop such
frames in 802.11 -> 802.3 conversion along with any
frames that have the wrong extension.

Cc: stable@vger.kernel.org
Reviewed-by: NJavier Cardona <javier@cozybit.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and
its length is likely to be less than IEEE80211_MAX_SSID_LEN most
of the time.

This patch fixes the ssid copy in ieee80211_ibss_join() by using
the SSID length to prevent it from reading beyond the string.

Cc: stable@vger.kernel.org
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
[rewrapped commit message, small rewording]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Per IEEE Std. 802.11-2012, Sec 8.2.4.4.1, the sequence Control field is
not present in control frames.  We noticed this problem when processing
Block Ack Requests.

Cc: stable@vger.kernel.org
Signed-off-by: NJavier Cardona <javier@cozybit.com>
Signed-off-by: NJavier Lopez <jlopex@cozybit.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Prior this fix, those frames were not received, nor forwarded.  Fix
this to receive and not forward.
Signed-off-by: NJavier Cardona <javier@cozybit.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Doing otherwise is wrong, and may wreak havoc on the mpp tables,
specially if the frame is encrypted.

Cc: stable@vger.kernel.org
Reported-by: NChaoxing Lin <Chaoxing.Lin@ultra-3eti.com>
Signed-off-by: NJavier Cardona <javier@cozybit.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Instead of the current whitelist which accepts duplicates
only for the quiet and vendor IEs, use a blacklist of all
IEs (that we currently parse) that can't be duplicated.

This avoids detecting a beacon as corrupt in the future
when new IEs are added that can be duplicated.

Cc: stable@vger.kernel.org
Signed-off-by: NPaul Stewart <pstew@chromium.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

A few places touch chan->max_power based on updated tx power rules, but
forget to do the same to chan->max_reg_power.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

No driver initializes chan->max_antenna_gain to something sensible, and
the only place where it is being used right now is inside ath9k. This
leads to ath9k potentially using less tx power than it can use, which can
decrease performance/range in some rare cases.

Rather than going through every single driver, this patch initializes
chan->orig_mag in wiphy_register(), ignoring whatever value the driver
left in there. If a driver for some reason wishes to limit it independent
from regulatory rulesets, it can do so internally.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some changes to fix issues with HT40 APs in Korea
and follow-up changes to allow using HT40 even if
the local regulatory database disallows it caused
issues with iwlwifi (and could cause issues with
other devices); iwlwifi firmware would assert if
you tried to connect to an AP that has an invalid
configuration (e.g. using HT40- on channel 140.)

Fix this, while avoiding the "Korean AP" issue by
disabling HT40 and advertising HT20 to the AP
when connecting.

Cc: stable@vger.kernel.org [3.6]
Reported-by: NFlorian Reitmeir <florian@reitmeir.org>
Tested-by: NFlorian Reitmeir <florian@reitmeir.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Avoid situation when we are on associate state in mac80211 and
on disassociate state in cfg80211. This can results on crash
during modules unload (like showed on this thread:
http://marc.info/?t=134373976300001&r=1&w=2) and possibly other
problems.
Reported-by: NPedro Francisco <pedrogfrancisco@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

A few places free skbs using dev_kfree_skb even though they're called
after ieee80211_subif_start_xmit might have cloned it for tracking tx
status. Use ieee80211_free_txskb here to prevent skb leaks.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes the following bug:

usb 1-1.1: restart device (8)
BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:654
in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper
 (usb_poison_urb+0x1c/0xf8)
 (usb_poison_anchored_urbs+0x48/0x78)
 (carl9170_usb_handle_tx_err+0x128/0x150)
 (carl9170_usb_reset+0xc/0x20)
 (carl9170_handle_command_response+0x298/0xea8)
 (carl9170_usb_tasklet+0x68/0x184)
 (tasklet_hi_action+0x84/0xdc)

this only happens if the device is plugged in an USB port,
the driver is loaded but inactive (e.g. the wlan interface
is down). If the device is active everything is fine.
Signed-off-by: NRonald Wahl <ronald.wahl@raritan.com>
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The dereference should be moved below the NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Driver gets LINK_LOST, DEAUTHENTICATED and DISASSOCIATED events
from firmware when connection is lost in different scenarios.
Currently we are using common code WLAN_REASON_DEAUTH_LEAVING
for these cases.

This patch adds support to parse an actual reason code from
firmware event body and send it to cfg80211.
WLAN_REASON_DEAUTH_LEAVING code is used if deauth is initiated
by our device.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch adds support to send correct reason code got from
firmware when association attempt fails. Also, the error message
displayed for association failure due to network incompatibility
is modified. Current message "cannot find ssid.." misleads user.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

scan_processing flag should be reset when scan request is failed
due to some reasons Ex. memory allocation failure etc. Otherwise
further scan requests will be blocked.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

There are cases we cannot scan when request is received.
For example, during WPA group key negociation the scan request
will be blocked. We should return an error code to cfg80211
because cfg80211_scan_done will never be called.
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NPaul Stewart <pstew@chromium.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The call to drv_get/set_tsf() was put on the workqueue to perform tsf
adjustments since that function might sleep. However it ended up inside
a spinlock, whose critical section must be atomic. Do tsf adjustment
outside the spinlock instead, and get rid of a warning.
Signed-off-by: NThomas Pedersen <thomas@cozybit.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This should be register 66 instead of 62.
(probably happened by copy&past'ing from the lines below)
Signed-off-by: NDaniel Golle <dgolle@allnet.de>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Using ieee80211_free_txskb for tx frames is required, since mac80211 clones
skbs for which socket tx status is requested.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Ensure that drv_start() always returns true, as a failing hw start usually
eventually leads to crashes when there's still a station entry present.
Call a power-on reset after a resume and after a hw reset failure to bring
the hardware back to life again.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ath_pci_aspm_init is only called on card init, so PCI registers get reset
after a suspend/resume cycle.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

as we hold dst_entry before we call __ip6_del_rt,
so we should alse call dst_release not only return
-ENOENT when the rt6_info is ip6_null_entry.

and we already hold the dst entry, so I think it's
safe to call dst_release out of the write-read lock.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Validation of userspace input shouldn't trigger dmesg spamming.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
here are three patches for the v3.7 release cycle. Two patches by Peter Senna
Tschudin which fix the return values in the error handling path of the sja1000
peak pci and pcmcia driver. And one patch by myself that fixes a compile
breakage of the mpc5xxx_can mscan driver due to a section conflict.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When large buffers are sent over connected TIPC sockets, it
is likely that the sk_backlog will be filled up on the
receiver side, but the TIPC flow control mechanism is happily
unaware of this since that is based on message count.

The sender will receive a TIPC_ERR_OVERLOAD message when this occurs
and drop it's side of the connection, leaving it stale on
the receiver end.

By increasing the sk_rcvbuf to a 'worst case' value, we avoid the
overload caused by a full backlog queue and the flow control
will work properly.

This worst case value is the max TIPC message size times
the flow control window, multiplied by two because a sender
will transmit up to double the window size before a port is marked
congested.
We multiply this by 2 to account for the sk_buff and other overheads.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fuzzing causes these printks to spew constantly.
Changing them to DEBUG statements is consistent with other usage in the file,
and makes them disappear when CONFIG_IRDA_DEBUG is disabled.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a qdisc is installed on a team device, its possible to get
a lockdep splat under stress, because nested dev_queue_xmit() can
lock busylock a second time (on a different device, so its a false
positive)

Avoid this problem using a distinct lock_class_key for team
devices.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a qdisc is installed on a bonding device, its possible to get
following lockdep splat under stress :

 =============================================
 [ INFO: possible recursive locking detected ]
 3.6.0+ #211 Not tainted
 ---------------------------------------------
 ping/4876 is trying to acquire lock:
  (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830

 but task is already holding lock:
  (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock);
   lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 6 locks held by ping/4876:
  #0:  (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e5030>] raw_sendmsg+0x600/0xc30
  #1:  (rcu_read_lock_bh){.+....}, at: [<ffffffff815ba4bd>] ip_finish_output+0x12d/0x870
  #2:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830
  #3:  (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830
  #4:  (&bond->lock){++.?..}, at: [<ffffffffa02128c1>] bond_start_xmit+0x31/0x4b0 [bonding]
  #5:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830

 stack backtrace:
 Pid: 4876, comm: ping Not tainted 3.6.0+ #211
 Call Trace:
  [<ffffffff810a0145>] __lock_acquire+0x715/0x1b80
  [<ffffffff810a256b>] ? mark_held_locks+0x9b/0x100
  [<ffffffff810a1bf2>] lock_acquire+0x92/0x1d0
  [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830
  [<ffffffff81726b7c>] _raw_spin_lock+0x3c/0x50
  [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830
  [<ffffffff8106264d>] ? rcu_read_lock_bh_held+0x5d/0x90
  [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830
  [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570
  [<ffffffffa0212a6a>] bond_start_xmit+0x1da/0x4b0 [bonding]
  [<ffffffff815796d0>] dev_hard_start_xmit+0x240/0x6b0
  [<ffffffff81597c6e>] sch_direct_xmit+0xfe/0x2a0
  [<ffffffff8157a249>] dev_queue_xmit+0x199/0x830
  [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570
  [<ffffffff815ba96f>] ip_finish_output+0x5df/0x870
  [<ffffffff815ba4bd>] ? ip_finish_output+0x12d/0x870
  [<ffffffff815bb964>] ip_output+0x54/0xf0
  [<ffffffff815bad48>] ip_local_out+0x28/0x90
  [<ffffffff815bc444>] ip_send_skb+0x14/0x50
  [<ffffffff815bc4b2>] ip_push_pending_frames+0x32/0x40
  [<ffffffff815e536a>] raw_sendmsg+0x93a/0xc30
  [<ffffffff8128d570>] ? selinux_file_send_sigiotask+0x1f0/0x1f0
  [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80
  [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220
  [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80
  [<ffffffff815f6855>] inet_sendmsg+0x125/0x240
  [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220
  [<ffffffff8155cddb>] sock_sendmsg+0xab/0xe0
  [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0
  [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0
  [<ffffffff8155d18c>] __sys_sendmsg+0x37c/0x390
  [<ffffffff81195b2a>] ? fsnotify+0x2ca/0x7e0
  [<ffffffff811958e8>] ? fsnotify+0x88/0x7e0
  [<ffffffff81361f36>] ? put_ldisc+0x56/0xd0
  [<ffffffff8116f98a>] ? fget_light+0x3da/0x510
  [<ffffffff8155f6c4>] sys_sendmsg+0x44/0x80
  [<ffffffff8172fc22>] system_call_fastpath+0x16/0x1b

Avoid this problem using a distinct lock_class_key for bonding
devices.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Suppose we have an SCTP connection with two paths. After connection is
established, path1 is not available, thus this path is marked as inactive. Then
traffic goes through path2, but for some reasons packets are delayed (after
rto.max). Because packets are delayed, the retransmit mechanism will switch
again to path1. At this time, we receive a delayed SACK from path2. When we
update the state of the path in sctp_check_transmitted(), we do not take into
account the source address of the SACK, hence we update the wrong path.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just to avoid confusion when people only reads this prototype.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
This series contains fixes/updates to ixgbe only.  There are three
PTP fixes, polling loop fix and the addition of a device id (X540-AT1).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit d2d68ba9 (ipv4: Cache input routes in fib_info nexthops.)
introduced a regression for forwarding.

This was hard to reproduce but the symptom was that packets were
delivered to local host instead of being forwarded.

David suggested to add fib_type to fib_info so that we dont
inadvertently share same fib_info for different purposes.

With help from Julian Anastasov who provided very helpful
hints, reproduced here :

<quote>
        Can it be a problem related to fib_info reuse
from different routes. For example, when local IP address
is created for subnet we have:

broadcast 192.168.0.255 dev DEV  proto kernel  scope link  src
192.168.0.1
192.168.0.0/24 dev DEV  proto kernel  scope link  src 192.168.0.1
local 192.168.0.1 dev DEV  proto kernel  scope host  src 192.168.0.1

        The "dev DEV  proto kernel  scope link  src 192.168.0.1" is
a reused fib_info structure where we put cached routes.
The result can be same fib_info for 192.168.0.255 and
192.168.0.0/24. RTN_BROADCAST is cached only for input
routes. Incoming broadcast to 192.168.0.255 can be cached
and can cause problems for traffic forwarded to 192.168.0.0/24.
So, this patch should solve the problem because it
separates the broadcast from unicast traffic.

        And the ip_route_input_slow caching will work for
local and broadcast input routes (above routes 1 and 3) just
because they differ in scope and use different fib_info.

</quote>

Many thanks to Chris Clayton for his patience and help.
Reported-by: NChris Clayton <chris2553@googlemail.com>
Bisected-by: NChris Clayton <chris2553@googlemail.com>
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit:
    6d99c4c5 can: mpc5xxx_can: make data used as *of_device_id.data const

both "struct mpc5xxx_can_data mpc5200_can_data" and "mpc5121_can_data" are
marked as "const" but also as "__devinitdata". This leads to the following
compile error:

drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict
drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict
drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict
drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict

This patch changes the "__devinitdata" to "__devinitconst" and marks the
"struct of_device_id mpc5xxx_can_table" as "const" and "__devinitconst", too.
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>