Removing old variables caused a compile error from nes_debug().
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Hardware resource types are added and when a resource isn't available,
its type is printed.
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When TX checksum offload is disabled for an iWarp connection,
skb->ip_summed needs to be set to CHECKSUM_NONE.
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

 - Remove unnecessary statement "if (1)"
 - Refactor a statement (wqe_misc |= NES_NIC_SQ_WQE_COMPLETION) out of
   if/else statement, because it is independant of the flow.
 - Define netdev->features in one line for clarity.
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In TSO handling code, skb_shared_info() is used to get the MSS
instead of the bool function skb_is_gso() (which always returns 1).
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 3236b2d4 ("IB/qib: MADs with misset M_Keys should return
failure") introduced a return code assignment that unfortunately
introduced an unconditional exit for the routine due to missing braces.

This patch adds the braces to correct the original patch.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix CQE expansion of unsignaled WQE -- don't expand the CQE when the
WQE index of the completed CQE matches with last pending WQE (tail) in
the queue.
Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Unlike other parts of the mlx4_ib code, the function build_mlx_header()
doesn't check if the iboe netdev of the given port is valid before
dereferencing it, which can cause a crash if the ethernet interface
has already been taken down.

Fix this by checking for a valid netdev pointer before using it to get
the port MAC address.
Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Convert a 0 error return code to a negative one, as returned elsewhere
in the function.

A simplified version of the semantic match that finds this problem is
as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e,e1,e2,e3,e4,x;
@@

(
if (\(ret != 0\|ret < 0\) || ...) { ... return ...; }
|
ret = 0
)
... when != ret = e1
*x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...);
... when != x = e2
    when != ret = e3
*if (x == NULL || ...)
{
  ... when != ret = e4
*  return ret;
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Correct spelling typos in comments in drivers/infiniband.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If CONFIG_VLAN_8021Q is not set, then vlan_dev_real_dev() just goes BUG(),
so we shouldn't call it unless we're actually dealing with a VLAN netdev.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The sm_lock spinlock is taken in the process context by
mlx4_ib_modify_device, and in the interrupt context by update_sm_ah,
so we need to take that spinlock with irqsave, and release it with
irqrestore.

Lockdeps reports this as follows:

    [ INFO: inconsistent lock state ]
    3.5.0+ #20 Not tainted
    inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
    swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
    (&(&ibdev->sm_lock)->rlock){?.+...}, at: [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib]
    {HARDIRQ-ON-W} state was registered at:
      [<ffffffff810b84a0>] mark_irqflags+0x120/0x190
      [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0
      [<ffffffff810b9f51>] lock_acquire+0xb1/0x150
      [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50
      [<ffffffffa028d563>] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib]
      [<ffffffffa026d1fc>] ib_modify_device+0x1c/0x20 [ib_core]
      [<ffffffffa026c353>] set_node_desc+0x83/0xc0 [ib_core]
      [<ffffffff8136a150>] dev_attr_store+0x20/0x30
      [<ffffffff81201fd6>] sysfs_write_file+0xe6/0x170
      [<ffffffff8118da38>] vfs_write+0xc8/0x190
      [<ffffffff8118dc01>] sys_write+0x51/0x90
      [<ffffffff8155b869>] system_call_fastpath+0x16/0x1b

    ...
    *** DEADLOCK ***

    1 lock held by swapper/0/0:

    stack backtrace:
    Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20
    Call Trace:
    <IRQ>  [<ffffffff810b7bea>] print_usage_bug+0x18a/0x190
    [<ffffffff810b7370>] ? print_irq_inversion_bug+0x210/0x210
    [<ffffffff810b7fb2>] mark_lock_irq+0xf2/0x280
    [<ffffffff810b8290>] mark_lock+0x150/0x240
    [<ffffffff810b84ef>] mark_irqflags+0x16f/0x190
    [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff810b9f51>] lock_acquire+0xb1/0x150
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffffa026b2fa>] ? ib_create_ah+0x1a/0x40 [ib_core]
    [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff810c27c3>] ? is_module_address+0x23/0x30
    [<ffffffffa028b05b>] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib]
    [<ffffffffa028c177>] mlx4_ib_event+0x117/0x160 [mlx4_ib]
    [<ffffffff81552501>] ? _raw_spin_lock_irqsave+0x61/0x70
    [<ffffffffa022718c>] mlx4_dispatch_event+0x6c/0x90 [mlx4_core]
    [<ffffffffa0221b40>] mlx4_eq_int+0x500/0x950 [mlx4_core]

Reported by: Or Gerlitz <ogerlitz@mellanox.com>
Tested-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 36a8f01c ("IB/qib: Add congestion control agent
implementation") tries to store the value 1984 in a u8, which leads to
truncation.  Fix this by making the member big enough.

This bug was detected by a smatch warning.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NRamkrishna Vepa <ramkrishna.vepa@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

It looks like one check was accidentally duplicated, and the other 3
checks were left out.  This was detected by scripts/coccinelle/tests/doubletest.cocci:

    drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:895:6-54: duplicated argument to && or ||
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Elminate some simple_strto* usage.

checkpatch also noted pr_ conversations, which have been done as
recommended.  The pr_fmt() define is used to shorten line length.

Other multi-line string warnings are also elmininated.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add a congestion control agent in the driver that handles gets and
sets from the congestion control manager in the fabric for the
Performance Scale Messaging (PSM) library.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Profiling has shown that sdma_lock is proving a bottleneck for
performance. The situations include:
 - RDMA reads when krcvqs > 1
 - post sends from multiple threads

For RDMA read the current global qib_wq mechanism runs on all CPUs
and contends for the sdma_lock when multiple RMDA read requests are
fielded on differenct CPUs. For post sends, the direct call to
qib_do_send() from multiple threads causes the contention.

Since the sdma mechanism is per port, this fix converts the existing
workqueue to a per port single thread workqueue to reduce the lock
contention in the RDMA read case, and for any other case where the QP
is scheduled via the workqueue mechanism from more than 1 CPU.

For the post send case, This patch modifies the post send code to test
for a non empty sdma engine.  If the sdma is not idle the (now single
thread) workqueue will be used to trigger the send engine instead of
the direct call to qib_do_send().
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

There is a cut-and-paste typo in the function qib_pci_slot_reset()
where it prints that the "link_reset" function is called rather than
the "slot_reset" function.  This makes the message misleading.
Signed-off-by: NBetty Dall <betty.dall@hp.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap.
If supplied, the assigned IRQ is tracked using rmap infrastructure.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit af061a64 ("IB/qib: Use RCU for qpn lookup") introduced sparse
warnings.

This patch corrects those issues.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

To allow easy paravirtualization of P_Key and GID table sizes, keep
paravirtualized sizes in mlx4_dev->caps, but save the actual physical
sizes from FW in struct: mlx4_dev->phys_cap.

In addition, in SR-IOV mode, do the following:

1. Reduce reported P_Key table size by 1.
   This is done to reserve the highest P_Key index for internal use,
   for declaring an invalid P_Key in P_Key paravirtualization.
   We require a P_Key index which always contain an invalid P_Key
   value for this purpose (i.e., one which cannot be modified by
   the subnet manager).  The way to do this is to reduce the
   P_Key table size reported to the subnet manager by 1, so that
   it will not attempt to access the P_Key at index #127.

2. Paravirtualize the GID table size to 1. Thus, each guest sees
   only a single GID (at its paravirtualized index 0).

In addition, since we are paravirtualizing the GID table size to 1, we
add paravirtualization of the master GID event here (i.e., we do not
do ib_dispatch_event() for the GUID change event on the master, since
its (only) GUID never changes).
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When the user queries for device capabilities, fill in the
masked_atomic_cap attribute with the real support level of atomic
capabilities instead of using a hard coded value.
Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The query QP code was didn't fill that attribute, do that.
Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il>
Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Events received for non-existent QPs should generate a warning that includes
the event type that was received.
Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il>
Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 8aac4cc3 ("IB/qib: RCU locking for MR validation") introduced
new sparse warnings in qib_keys.c.
Acked-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The port management change event can replace smp_snoop.  If the
capability bit for this event is set in dev-caps, the event is used
(by the driver setting the PORT_MNG_CHG_EVENT bit in the async event
mask in the MAP_EQ fw command).  In this case, when the driver passes
incoming SMP PORT_INFO SET mads to the FW, the FW generates port
management change events to signal any changes to the driver.

If the FW generates these events, smp_snoop shouldn't be invoked in
ib_process_mad(), or duplicate events will occur (once from the
FW-generated event, and once from smp_snoop).

In the case where the FW does not generate port management change
events smp_snoop needs to be invoked to create these events.  The flow
in smp_snoop has been modified to make use of the same procedures as
in the fw-generated-event event case to generate the port management
events (LID change, Client-rereg, Pkey change, and/or GID change).

Port management change event handling required changing the
mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument
(last argument) had to be changed to unsigned long in order to
accomodate passing the EQE pointer.

We also needed to move the definition of struct mlx4_eqe from
net/mlx4.h to file device.h -- to make it available to the IB driver,
to handle port management change events.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Profiling indicates that MR validation locking is expensive.  The MR
table is largely read-only and is a suitable candidate for RCU locking.

The patch uses RCU locking during validation to eliminate one
lock/unlock during that validation.
Reviewed-by: NMike Heinz <michael.william.heinz@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

A timing issue can occur where qib_mr_dereg can return -EBUSY if the
MR use count is not zero.

This can occur if the MR is de-registered while RDMA read response
packets are being progressed from the SDMA ring.  The suspicion is
that the peer sent an RDMA read request, which has already been copied
across to the peer.  The peer sees the completion of his request and
then communicates to the responder that the MR is not needed any
longer.  The responder tries to de-register the MR, catching some
responses remaining in the SDMA ring holding the MR use count.

The code now uses a get/put paradigm to track MR use counts and
coordinates with the MR de-registration process using a completion
when the count has reached zero.  A timeout on the delay is in place
to catch other EBUSY issues.

The reference count protocol is as follows:
- The return to the user counts as 1
- A reference from the lk_table or the qib_ibdev counts as 1.
- Transient I/O operations increase/decrease as necessary

A lot of code duplication has been folded into the new routines
init_qib_mregion() and deinit_qib_mregion().  Additionally, explicit
initialization of fields to zero is now handled by kzalloc().

Also, duplicated code 'while.*num_sge' that decrements reference
counts have been consolidated in qib_put_ss().
Reviewed-by: NRamkrishna Vepa <ramkrishna.vepa@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

An MR reference leak exists when handling UC RDMA writes with
immediate data because we manipulate the reference counts as if the
operation had been a send.

This patch moves the last_imm label so that the RDMA write operations
with immediate data converge at the cq building code.  The copy/mr
deref code is now done correctly prior to the branch to last_imm.
Reviewed-by: NEdward Mascarenhas <edward.mascarenhas@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Define pr_fmt and add some pr_debug prints.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
Signed-off-by: NRoland Dreier <roland@purestorage.com>

sparse correctly warns that if mpa->private_data_size is __be16, then
doing += on it is wrong, even if we do += htons(<something>) -- on a
little endian system, carries will go the wrong way.  Fix this up by
doing the addition in native byte order.
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The driver is modified to support three operation modes.

If supported by firmware use the device managed flow steering
API, that which we call device managed steering mode. Else, if
the firmware supports the B0 steering mode use it, and finally,
if none of the above, use the A0 steering mode.

When the steering mode is device managed, the code is modified
such that L2 based rules set by the mlx4_en driver for Ethernet
unicast and multicast, and the IB stack multicast attach calls
done through the mlx4_ib driver are all routed to use the device
managed API.

When attaching rule using device managed flow steering API,
the firmware returns a 64 bit registration id, which is to be
provided during detach.

Currently the firmware is always programmed during HCA initialization
to use standard L2 hashing. Future work should be done to allow
configuring the flow-steering hash function with common, non
proprietary means.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We want to set attr->max_srq_sge to dev->attr.max_srq_sge, not to itself.

This was detected by Coverity (CID 709210).
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This means passing in a suitable destination address.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dev->sgid_tbl[] array is allocated in ocrdma_alloc_resources().
It has OCRDMA_MAX_SGID elements so the test here is off by one.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix RQ/SRQ error CQE polling.  Return error CQE to consumer for error
case which was not returned previously.
Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix max sge calculation for sq, rq, srq for all hardware types.
Signed-off-by: NMahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>