This patch kills mem_cgroup_lru_del(), we can use
mem_cgroup_lru_del_list() instead.  On 0-order isolation we already have
right lru list id.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After patch "mm: forbid lumpy-reclaim in shrink_active_list()" we can
completely remove anon/file and active/inactive lru type filters from
__isolate_lru_page(), because isolation for 0-order reclaim always
isolates pages from right lru list.  And pages-isolation for lumpy
shrink_inactive_list() or memory-compaction anyway allowed to isolate
pages from all evictable lru lists.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let's toss lru index through call stack to isolate_lru_pages(), this is
better than its reconstructing from individual bits.

[akpm@linux-foundation.org: fix kerneldoc, per Minchan]
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With mem_cgroup_disabled() now explicit, it becomes clear that the
zone_reclaim_stat structure actually belongs in lruvec, per-zone when
memcg is disabled but per-memcg per-zone when it's enabled.

We can delete mem_cgroup_get_reclaim_stat(), and change
update_page_reclaim_stat() to update just the one set of stats, the one
which get_scan_count() will actually use.
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Although one has to admire the skill with which it has been concealed,
scanning_global_lru(mz) is actually just an interesting way to test
mem_cgroup_disabled().  Too many developer hours have been wasted on
confusing it with global_reclaim(): just use mem_cgroup_disabled().
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NGlauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

That stuff __mem_cgroup_commit_charge_swapin() does with a swap entry, it
has a name and even a declaration: just use mem_cgroup_uncharge_swap().
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The need_fixup arg to mem_cgroup_move_swap_account() is always false,
so just remove it.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch changes memcg's behavior at task_move().

At task_move(), the kernel scans a task's page table and move the changes
for mapped pages from source cgroup to target cgroup.  There has been a
bug at handling shared anonymous pages for a long time.

Before patch:
  - The spec says 'shared anonymous pages are not moved.'
  - The implementation was 'shared anonymoys pages may be moved'.
    If page_mapcount <=2, shared anonymous pages's charge were moved.

After patch:
  - The spec says 'all anonymous pages are moved'.
  - The implementation is 'all anonymous pages are moved'.

Considering usage of memcg, this will not affect user's experience.
'shared anonymous' pages only exists between a tree of processes which
don't do exec().  Moving one of process without exec() seems not sane.
For example, libcgroup will not be affected by this change.  (Anyway, no
one noticed the implementation for a long time...)

Below is a discussion log:

 - current spec/implementation are complex
 - Now, shared file caches are moved
 - It adds unclear check as page_mapcount(). To do correct check,
   we should check swap users, etc.
 - No one notice this implementation behavior. So, no one get benefit
   from the design.
 - In general, once task is moved to a cgroup for running, it will not
   be moved....
 - Finally, we have control knob as memory.move_charge_at_immigrate.

Here is a patch to allow moving shared pages, completely. This makes
memcg simpler and fix current broken code.
Suggested-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The overall memblock has been organized into the memory regions and
reserved regions.  Initially, the memory regions and reserved regions are
stored in the predetermined arrays of "struct memblock _region".  It's
possible for the arrays to be enlarged when we have newly added regions,
but no free space left there.  The policy here is to create double-sized
array either by slab allocator or memblock allocator.  Unfortunately, we
didn't free the old array, which might be allocated through slab allocator
before.  That would cause memory leak.

The patch introduces 2 variables to trace where (slab or memblock) the
memory and reserved regions come from.  The memory for the memory or
reserved regions will be deallocated by kfree() if that was allocated by
slab allocator.  Thus to fix the memory leak issue.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The overall memblock has been organized into the memory regions and
reserved regions.  Initially, the memory regions and reserved regions are
stored in the predetermined arrays of "struct memblock _region".  It's
possible for the arrays to be enlarged when we have newly added regions
for them, but no enough space there.  Under the situation, We will created
double-sized array to meet the requirement.  However, the original
implementation converted the VA (Virtual Address) of the newly allocated
array of regions to PA (Physical Address), then translate back when we
allocates the new array from slab.  That's actually unnecessary.

The patch removes the duplicate VA/PA conversion.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Transparent huge pages can change page->flags (PG_compound_lock) without
taking Slab lock.  Since THP can not break slab pages we can safely access
compound page without taking compound lock.

Specifically this patch fixes a race between compound_unlock() and slab
functions which perform page-flags updates.  This can occur when
get_page()/put_page() is called on a page from slab.

[akpm@linux-foundation.org: tweak comment text, fix comment layout, fix label indenting]
Reported-by: NAmey Bhide <abhide@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The transfer of ->flags causes some of the static mapping virtual
addresses to be prematurely freed (before the mapping is removed) because
VM_LAZY_FREE gets "set" if tmp->flags has VM_IOREMAP set.  This might
cause subsequent vmalloc/ioremap calls to fail because it might allocate
one of the freed virtual address ranges that aren't unmapped.

va->flags has different types of flags from tmp->flags.  If a region with
VM_IOREMAP set is registered with vm_area_add_early(), it will be removed
by __purge_vmap_area_lazy().

Fix vmalloc_init() to correctly initialize vmap_area for the given
vm_struct.

Also initialise va->vm.  If it is not set, find_vm_area() for the early
vm regions will always fail.
Signed-off-by: NKyongHo Cho <pullip.cho@samsung.com>
Cc: "Olav Haugan" <ohaugan@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The oom_score_adj scale ranges from -1000 to 1000 and represents the
proportion of memory available to the process at allocation time.  This
means an oom_score_adj value of 300, for example, will bias a process as
though it was using an extra 30.0% of available memory and a value of
-350 will discount 35.0% of available memory from its usage.

The oom killer badness heuristic also uses this scale to report the oom
score for each eligible process in determining the "best" process to
kill.  Thus, it can only differentiate each process's memory usage by
0.1% of system RAM.

On large systems, this can end up being a large amount of memory: 256MB
on 256GB systems, for example.

This can be fixed by having the badness heuristic to use the actual
memory usage in scoring threads and then normalizing it to the
oom_score_adj scale for userspace.  This results in better comparison
between eligible threads for kill and no change from the userspace
perspective.
Suggested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes we'd like to avoid swapping out anonymous memory.  In
particular, avoid swapping out pages of important process or process
groups while there is a reasonable amount of pagecache on RAM so that we
can satisfy our customers' requirements.

OTOH, we can control how aggressive the kernel will swap memory pages with
/proc/sys/vm/swappiness for global and
/sys/fs/cgroup/memory/memory.swappiness for each memcg.

But with current reclaim implementation, the kernel may swap out even if
we set swappiness=0 and there is pagecache in RAM.

This patch changes the behavior with swappiness==0.  If we set
swappiness==0, the kernel does not swap out completely (for global reclaim
until the amount of free pages and filebacked pages in a zone has been
reduced to something very very small (nr_free + nr_filebacked < high
watermark)).
Signed-off-by: NSatoru Moriya <satoru.moriya@hds.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NRik van Riel <riel@redhat.com>
Acked-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When called for anonymous (non-shared) mappings, hugetlb_reserve_pages()
does a resv_map_alloc().  It depends on code in hugetlbfs's
vm_ops->close() to release that allocation.

However, in the mmap() failure path, we do a plain unmap_region() without
the remove_vma() which actually calls vm_ops->close().

This is a decent fix.  This leak could get reintroduced if new code (say,
after hugetlb_reserve_pages() in hugetlbfs_file_mmap()) decides to return
an error.  But, I think it would have to unroll the reservation anyway.

Christoph's test case:

	http://marc.info/?l=linux-mm&m=133728900729735

This patch applies to 3.4 and later.  A version for earlier kernels is at
https://lkml.org/lkml/2012/5/22/418.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: NChristoph Lameter <cl@linux.com>
Tested-by: NChristoph Lameter <cl@linux.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>	[2.6.32+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The objects of "struct bootmem_data_t" are linked together to form
double-linked list sequentially based on its minimal page frame number.

The current implementation implicitly supports the following cases,
which means the inserting point for current bootmem data depends on how
"list_for_each" works.  That makes the code a little hard to read.
Besides, "list_for_each" and "list_entry" can be replaced with
"list_for_each_entry".

        - The linked list is empty.
        - There has no entry in the linked list, whose minimal page
          frame number is bigger than current one.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 64574746 ("vmscan: detect mapped file pages used only once")
made mapped pages have another round in inactive list because they might
be just short lived and so we could consider them again next time.  This
heuristic helps to reduce pressure on the active list with a streaming
IO worklods.

This patch fixes a regression introduced by this commit for heavy shmem
based workloads because unlike Anon pages, which are excluded from this
heuristic because they are usually long lived, shmem pages are handled
as a regular page cache.

This doesn't work quite well, unfortunately, if the workload is mostly
backed by shmem (in memory database sitting on 80% of memory) with a
streaming IO in the background (backup - up to 20% of memory).  Anon
inactive list is full of (dirty) shmem pages when watermarks are hit.
Shmem pages are kept in the inactive list (they are referenced) in the
first round and it is hard to reclaim anything else so we reach lower
scanning priorities very quickly which leads to an excessive swap out.

Let's fix this by excluding all swap backed pages (they tend to be long
lived wrt.  the regular page cache anyway) from used-once heuristic and
rather activate them if they are referenced.

The customer's workload is shmem backed database (80% of RAM) and they
are measuring transactions/s with an IO in the background (20%).
Transactions touch more or less random rows in the table.  The
transaction rate fell by a factor of 3 (in the worst case) because of
commit 64574746.  This patch restores the previous numbers.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>	[2.6.34+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- make pageflag_names[] const

- remove null termination of pageflag_names[]

Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

String tables with names of enum items are always prone to go out of
sync with the enums themselves.  Ensure during compile time that the
name table of page flags has the same size as the page flags enum.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The array pageflag_names[] does conversion from page flags into their
corresponding names so that a meaningful representation of the
corresponding page flag can be printed.  This mechanism is used while
dumping page frames.  However, the array missed PG_compound_lock.  So
the PG_compound_lock page flag would be printed as a digital number
instead of a meaningful string.

The patch fixes that and prints "compound_lock" for the PG_compound_lock
page flag.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is better to define readahead(2) in mm/readahead.c than in
mm/filemap.c.
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's quite easy for tmpfs to scan the radix_tree to support llseek's new
SEEK_DATA and SEEK_HOLE options: so add them while the minutiae are still
on my mind (in particular, the !PageUptodate-ness of pages fallocated but
still unwritten).

But I don't know who actually uses SEEK_DATA or SEEK_HOLE, and whether it
would be of any use to them on tmpfs.  This code adds 92 lines and 752
bytes on x86_64 - is that bloat or worthwhile?

[akpm@linux-foundation.org: fix warning with CONFIG_TMPFS=n]
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Josef Bacik <josef@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Jeff liu <jeff.liu@oracle.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As it stands, a large fallocate() on tmpfs is liable to fill memory with
pages, freed on failure except when they run into swap, at which point
they become fixed into the file despite the failure.  That feels quite
wrong, to be consuming resources precisely when they're in short supply.

Go the other way instead: shmem_fallocate() indicate the range it has
fallocated to shmem_writepage(), keeping count of pages it's allocating;
shmem_writepage() reactivate instead of swapping out pages fallocated by
this syscall (but happily swap out those from earlier occasions), keeping
count; shmem_fallocate() compare counts and give up once the reactivated
pages have started to coming back to writepage (approximately: some zones
would in fact recycle faster than others).

This is a little unusual, but works well: although we could consider the
failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling
added in swapfile.c and memcontrol.c, I doubt that we shall ever want to.

(If there's no swap, an over-large fallocate() on tmpfs is limited in the
same way as writing: stopped by rlimit, or by tmpfs mount size if that was
set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or
OVERCOMMIT_NEVER.  If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill
others as writing would, but stops and frees if interrupted.)

Now that everything is freed on failure, we can then skip updating ctime.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the previous episode, we left the already-fallocated pages attached to
the file when shmem_fallocate() fails part way through.

Now try to do better, by extending the earlier optimization of !Uptodate
pages (then always under page lock) to !Uptodate pages (outside of page
lock), representing fallocated pages.  And don't waste time clearing them
at the time of fallocate(), leave that until later if necessary.

Adapt shmem_truncate_range() to shmem_undo_range(), so that a failing
fallocate can recognize and remove precisely those !Uptodate allocations
which it added (and were not independently allocated by racing tasks).

But unless we start playing with swapfile.c and memcontrol.c too, once one
of our fallocated pages reaches shmem_writepage(), we do then have to
instantiate it as an ordinarily allocated page, before swapping out.  This
is unsatisfactory, but improved in the next episode.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The systemd plumbers expressed a wish that tmpfs support preallocation.
Cong Wang wrote a patch, but several kernel guys expressed scepticism:
https://lkml.org/lkml/2011/11/18/137

Christoph Hellwig: What for exactly? Please explain why preallocating on
tmpfs would make any sense.

Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files
on the /dev/shm filesystem.  The glibc fallback loop for -ENOSYS [or
-EOPNOTSUPP] on fallocate is just ugly.

Hugh Dickins: If tmpfs is going to support
fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the
deallocation but fail the allocation.  Christoph Hellwig: Agreed.

Now that we do have shmem_fallocate() for hole-punching, plumb in basic
support for preallocation mode too.  It's fairly straightforward (though
quite a few details needed attention), except for when it fails part way
through.  What a pity that fallocate(2) was not specified to return the
length allocated, permitting short fallocations!

As it is, when it fails part way through, we ought to free what has just
been allocated by this system call; but must be very sure not to free any
allocated earlier, or any allocated by racing accesses (not all excluded
by i_mutex).

But we cannot distinguish them: so in this patch simply leak allocations
on partial failure (they will be freed later if the file is removed).

An attractive alternative approach would have been for fallocate() not to
allocate pages at all, but note reservations by entries in the radix-tree.
 But that would give less assurance, and, critically, would be hard to fit
with mem cgroups (who owns the reservations?): allocating pages lets
fallocate() behave in just the same way as write().
Based-on-patch-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove vmtruncate_range(), and remove the truncate_range method from
struct inode_operations: only tmpfs ever supported it, and tmpfs has now
converted over to using the fallocate method of file_operations.

Update Documentation accordingly, adding (setlease and) fallocate lines.
And while we're in mm.h, remove duplicate declarations of shmem_lock() and
shmem_file_setup(): everyone is now using the ones in shmem_fs.h.
Based-on-patch-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now tmpfs supports hole-punching via fallocate(), switch madvise_remove()
to use do_fallocate() instead of vmtruncate_range(): which extends
madvise(,,MADV_REMOVE) support from tmpfs to ext4, ocfs2 and xfs.

There is one more user of vmtruncate_range() in our tree,
staging/android's ashmem_shrink(): convert it to use do_fallocate() too
(but if its unpinned areas are already unmapped - I don't know - then it
would do better to use shmem_truncate_range() directly).
Based-on-patch-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

tmpfs has supported hole-punching since 2.6.16, via
madvise(,,MADV_REMOVE).

But nowadays fallocate(,FALLOC_FL_PUNCH_HOLE|FALLOC_FL_KEEP_SIZE,,) is
the agreed way to punch holes.

So add shmem_fallocate() to support that, and tweak shmem_truncate_range()
to support partial pages at both the beginning and end of range (never
needed for madvise, which demands rounded addr and rounds up length).
Based-on-patch-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Nick proposed years ago that tmpfs should avoid clearing its pages where
write will overwrite them with new data, as ramfs has long done.  But I
messed it up and just got bad data.  Tried again recently, it works
fine.

Here's time output for writing 4GiB 16 times on this Core i5 laptop:

before: real	0m21.169s user	0m0.028s sys	0m21.057s
        real	0m21.382s user	0m0.016s sys	0m21.289s
        real	0m21.311s user	0m0.020s sys	0m21.217s

after:  real	0m18.273s user	0m0.032s sys	0m18.165s
        real	0m18.354s user	0m0.020s sys	0m18.265s
        real	0m18.440s user	0m0.032s sys	0m18.337s

ramfs:  real	0m16.860s user	0m0.028s sys	0m16.765s
        real	0m17.382s user	0m0.040s sys	0m17.273s
        real	0m17.133s user	0m0.044s sys	0m17.021s

Yes, I have done perf reports, but they need more explanation than they
deserve: in summary, clear_page vanishes, its cache loading shifts into
copy_user_generic_unrolled; shmem_getpage_gfp goes down, and
surprisingly mark_page_accessed goes way up - I think because they are
respectively where the cache gets to be reloaded after being purged by
clear or copy.
Suggested-by: NNick Piggin <npiggin@gmail.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let tmpfs into the NOSEC optimization (avoiding file_remove_suid()
overhead on most common writes): set MS_NOSEC on its superblocks.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the
backing RAM has to be below 4GB.  Not a problem while the boards
supported only 4GB: but now Intel's D2700MUD boards support 8GB, and
their GMA3600 is managed by the GMA500 driver.

shmem/tmpfs has never pretended to support hardware restrictions on the
backing memory, but it might have appeared to do so before v3.1, and
even now it works fine until a page is swapped out then back in.  When
read_cache_page_gfp() supplied a freshly allocated page for copy, that
compensated for whatever choice might have been made by earlier swapin
readahead; but swapoff was likely to destroy the illusion.

We'd like to continue to support GMA500, so now add a new
shmem_should_replace_page() check on the zone when about to move a page
from swapcache to filecache (in swapin and swapoff cases), with
shmem_replace_page() to allocate and substitute a suitable page (given
gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32).

This does involve a minor extension to mem_cgroup_replace_page_cache()
(the page may or may not have already been charged); and I've removed a
comment and call to mem_cgroup_uncharge_cache_page(), which in fact is
always a no-op while PageSwapCache.

Also removed optimization of an unlikely path in shmem_getpage_gfp(),
now that we need to check PageSwapCache more carefully (a racing caller
might already have made the copy).  And at one point shmem_unuse_inode()
needs to use the hitherto private page_swapcount(), to guard against
racing with inode eviction.

It would make sense to extend shmem_should_replace_page(), to cover
cpuset and NUMA mempolicy restrictions too, but set that aside for now:
needs a cleanup of shmem mempolicy handling, and more testing, and ought
to handle swap faults in do_swap_page() as well as shmem.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Stephane Marchesin <marcheu@chromium.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When MIGRATE_UNMOVABLE pages are freed from MIGRATE_UNMOVABLE type
pageblock (and some MIGRATE_MOVABLE pages are left in it) waiting until an
allocation takes ownership of the block may take too long.  The type of
the pageblock remains unchanged so the pageblock cannot be used as a
migration target during compaction.

Fix it by:

* Adding enum compact_mode (COMPACT_ASYNC_[MOVABLE,UNMOVABLE], and
  COMPACT_SYNC) and then converting sync field in struct compact_control
  to use it.

* Adding nr_pageblocks_skipped field to struct compact_control and
  tracking how many destination pageblocks were of MIGRATE_UNMOVABLE type.
   If COMPACT_ASYNC_MOVABLE mode compaction ran fully in
  try_to_compact_pages() (COMPACT_COMPLETE) it implies that there is not a
  suitable page for allocation.  In this case then check how if there were
  enough MIGRATE_UNMOVABLE pageblocks to try a second pass in
  COMPACT_ASYNC_UNMOVABLE mode.

* Scanning the MIGRATE_UNMOVABLE pageblocks (during COMPACT_SYNC and
  COMPACT_ASYNC_UNMOVABLE compaction modes) and building a count based on
  finding PageBuddy pages, page_count(page) == 0 or PageLRU pages.  If all
  pages within the MIGRATE_UNMOVABLE pageblock are in one of those three
  sets change the whole pageblock type to MIGRATE_MOVABLE.

My particular test case (on a ARM EXYNOS4 device with 512 MiB, which means
131072 standard 4KiB pages in 'Normal' zone) is to:

- allocate 120000 pages for kernel's usage
- free every second page (60000 pages) of memory just allocated
- allocate and use 60000 pages from user space
- free remaining 60000 pages of kernel memory
  (now we have fragmented memory occupied mostly by user space pages)
- try to allocate 100 order-9 (2048 KiB) pages for kernel's usage

The results:
- with compaction disabled I get 11 successful allocations
- with compaction enabled - 14 successful allocations
- with this patch I'm able to get all 100 successful allocations

NOTE: If we can make kswapd aware of order-0 request during compaction, we
can enhance kswapd with changing mode to COMPACT_ASYNC_FULL
(COMPACT_ASYNC_MOVABLE + COMPACT_ASYNC_UNMOVABLE).  Please see the
following thread:

	http://marc.info/?l=linux-mm&m=133552069417068&w=2

[minchan@kernel.org: minor cleanups]
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

alloc_bootmem_section() derives allocation area constraints from the
specified sparsemem section.  This is a bit specific for a generic memory
allocator like bootmem, though, so move it over to sparsemem.

As __alloc_bootmem_node_nopanic() already retries failed allocations with
relaxed area constraints, the fallback code in sparsemem.c can be removed
and the code becomes a bit more compact overall.

[akpm@linux-foundation.org: fix build]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pass down the node descriptor instead of the more specific bootmem node
descriptor down the call stack, like nobootmem does, when there is no good
reason for the two to be different.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While the panicking node-specific allocation function tries to satisfy
node+goal, goal, node, anywhere, the non-panicking function still does
node+goal, goal, anywhere.

Make it simpler: define the panicking version in terms of the non-panicking
one, like the node-agnostic interface, so they always behave the same way
apart from how to deal with allocation failure.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__alloc_bootmem_node and __alloc_bootmem_low_node documentation claims
the functions panic on allocation failure.  Do it.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While the panicking node-specific allocation function tries to satisfy
node+goal, goal, node, anywhere, the non-panicking function still does
node+goal, goal, anywhere.

Make it simpler: define the panicking version in terms of the
non-panicking one, like the node-agnostic interface, so they always behave
the same way apart from how to deal with allocation failure.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Match the nobootmem version of __alloc_bootmem_node.  Try to satisfy both
the node and the goal, then just the goal, then just the node, then
allocate anywhere before panicking.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Matching the desired goal to the right node is one thing, dropping the
goal when it can not be satisfied is another.  Split this into separate
functions so that subsequent patches can use the node-finding but drop and
handle the goal fallback on their own terms.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Callsites need to provide a bootmem_data_t *, make the naming more
descriptive.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>