Since f82b217e lockdep can output spurious
warnings related to hwirqs due to hardirq_off shrinkage from int to bit-sized
flag. Guard it with double negation to fix the warning.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

When we enable DEBUG_LOCK_ALLOC but do not enable PROVE_LOCKING and or
LOCK_STAT, lock_alloc() and lock_release() turn into nops, even though
we should be doing hlock checking (check=1).

This causes a false warning and a lockdep self-disable.

Rectify this.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Solve this by marking the classes as unused and not printing information
about the unused classes.
Reported-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Acked-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On Fri, 2008-08-01 at 16:26 -0700, Linus Torvalds wrote:

> On Fri, 1 Aug 2008, David Miller wrote:
> >
> > Taking more than a few locks of the same class at once is bad
> > news and it's better to find an alternative method.
>
> It's not always wrong.
>
> If you can guarantee that anybody that takes more than one lock of a
> particular class will always take a single top-level lock _first_, then
> that's all good. You can obviously screw up and take the same lock _twice_
> (which will deadlock), but at least you cannot get into ABBA situations.
>
> So maybe the right thing to do is to just teach lockdep about "lock
> protection locks". That would have solved the multi-queue issues for
> networking too - all the actual network drivers would still have taken
> just their single queue lock, but the one case that needs to take all of
> them would have taken a separate top-level lock first.
>
> Never mind that the multi-queue locks were always taken in the same order:
> it's never wrong to just have some top-level serialization, and anybody
> who needs to take <n> locks might as well do <n+1>, because they sure as
> hell aren't going to be on _any_ fastpaths.
>
> So the simplest solution really sounds like just teaching lockdep about
> that one special case. It's not "nesting" exactly, although it's obviously
> related to it.

Do as Linus suggested. The lock protection lock is called nest_lock.

Note that we still have the MAX_LOCK_DEPTH (48) limit to consider, so anything
that spills that it still up shit creek.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

struct held_lock {
        u64                        prev_chain_key;       /*     0     8 */
        struct lock_class *        class;                /*     8     8 */
        long unsigned int          acquire_ip;           /*    16     8 */
        struct lockdep_map *       instance;             /*    24     8 */
        int                        irq_context;          /*    32     4 */
        int                        trylock;              /*    36     4 */
        int                        read;                 /*    40     4 */
        int                        check;                /*    44     4 */
        int                        hardirqs_off;         /*    48     4 */

        /* size: 56, cachelines: 1 */
        /* padding: 4 */
        /* last cacheline: 56 bytes */
};

struct held_lock {
        u64                        prev_chain_key;       /*     0     8 */
        long unsigned int          acquire_ip;           /*     8     8 */
        struct lockdep_map *       instance;             /*    16     8 */
        unsigned int               class_idx:11;         /*    24:21  4 */
        unsigned int               irq_context:2;        /*    24:19  4 */
        unsigned int               trylock:1;            /*    24:18  4 */
        unsigned int               read:2;               /*    24:16  4 */
        unsigned int               check:2;              /*    24:14  4 */
        unsigned int               hardirqs_off:1;       /*    24:13  4 */

        /* size: 32, cachelines: 1 */
        /* padding: 4 */
        /* bit_padding: 13 bits */
        /* last cacheline: 32 bytes */
};

[mingo@elte.hu: shrunk hlock->class too]
[peterz@infradead.org: fixup bit sizes]
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

this can be used to reset a held lock's subclass, for arbitrary-depth
iterated data structures such as trees or lists which have per-node
locks.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we traverse the graph, either forwards or backwards, we
are interested in whether a certain property exists somewhere
in a node reachable in the graph.

Therefore it is never necessary to traverse through a node more
than once to get a correct answer to the given query.

Take advantage of this property using a global ID counter so that we
need not clear all the markers in all the lock_class entries before
doing a traversal.  A new ID is choosen when we start to traverse, and
we continue through a lock_class only if it's ID hasn't been marked
with the new value yet.

This short-circuiting is essential especially for high CPU count
systems.  The scheduler has a runqueue per cpu, and needs to take
two runqueue locks at a time, which leads to long chains of
backwards and forwards subgraphs from these runqueue lock nodes.
Without the short-circuit implemented here, a graph traversal on
a runqueue lock can take up to (1 << (N - 1)) checks on a system
with N cpus.

For anything more than 16 cpus or so, lockdep will eventually bring
the machine to a complete standstill.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix this false positive:

[    0.020000] ------------[ cut here ]------------
[    0.020000] WARNING: at kernel/lockdep.c:2718 check_flags+0x14a/0x170()
[    0.020000] Modules linked in:
[    0.020000] Pid: 0, comm: swapper Not tainted 2.6.26-tip-00343-gd7e5521-dirty #14486
[    0.020000]  [<c01312e4>] warn_on_slowpath+0x54/0x80
[    0.020000]  [<c067e451>] ? _spin_unlock_irqrestore+0x61/0x70
[    0.020000]  [<c0131bb1>] ? release_console_sem+0x201/0x210
[    0.020000]  [<c0143d65>] ? __kernel_text_address+0x35/0x40
[    0.020000]  [<c010562e>] ? dump_trace+0x5e/0x140
[    0.020000]  [<c01518b5>] ? __lock_acquire+0x245/0x820
[    0.020000]  [<c015063a>] check_flags+0x14a/0x170
[    0.020000]  [<c0151ed8>] ? lock_acquire+0x48/0xc0
[    0.020000]  [<c0151ee1>] lock_acquire+0x51/0xc0
[    0.020000]  [<c014a16c>] ? down+0x2c/0x40
[    0.020000]  [<c010a609>] ? sched_clock+0x9/0x10
[    0.020000]  [<c067e7b2>] _write_lock+0x32/0x60
[    0.020000]  [<c013797f>] ? request_resource+0x1f/0xb0
[    0.020000]  [<c013797f>] request_resource+0x1f/0xb0
[    0.020000]  [<c02f89ad>] vgacon_startup+0x2bd/0x3e0
[    0.020000]  [<c094d62a>] con_init+0x19/0x22f
[    0.020000]  [<c0330c7c>] ? tty_register_ldisc+0x5c/0x70
[    0.020000]  [<c094cf49>] console_init+0x20/0x2e
[    0.020000]  [<c092a969>] start_kernel+0x20c/0x379
[    0.020000]  [<c092a516>] ? unknown_bootoption+0x0/0x1f6
[    0.020000]  [<c092a099>] __init_begin+0x99/0xa1
[    0.020000]  =======================
[    0.020000] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.020000] possible reason: unannotated irqs-on.
[    0.020000] irq event stamp: 0

which occurs if CONFIG_TRACE_IRQFLAGS=y, CONFIG_DEBUG_LOCKDEP=y,
but CONFIG_PROVE_LOCKING is disabled.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is based on x86/master branch of git-x86 tree, and has been tested
on x86_64 platform.

ChangeLog:

v2:

- Enclosing proc file system related code into CONFIG_PROVE_LOCKING.

- Fix nr_chain_hlocks update code.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch records array of lock_class into lock_chain, and export
lock_chain information via /proc/lockdep_chains.

It is based on x86/master branch of git-x86 tree, and has been tested
on x86_64 platform.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With the introduction of ftrace, it is possible to recurse into
the lockdep functions via the mcount call. To prevent possible
lockups, updating the lockdep_recursion counter on grabbing the internal
lockdep_lock should prevent deadlocks.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch removes the "notrace" annotation from lockdep and adds the debugging
files in the kernel director to those that should not be compiled with
"-pg" mcount tracing.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add notrace annotations to lockdep to keep ftrace from causing
recursive problems with lock tracing and debugging.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds latency tracing for critical timings
(how long interrupts are disabled for).

 "irqsoff" is added to /debugfs/tracing/available_tracers

Note:
  tracing_max_latency
    also holds the max latency for irqsoff (in usecs).
   (default to large number so one must start latency tracing)

  tracing_thresh
    threshold (in usecs) to always print out if irqs off
    is detected to be longer than stated here.
    If irq_thresh is non-zero, then max_irq_latency
    is ignored.

Here's an example of a trace with ftrace_enabled = 0

=======
preemption latency trace v1.1.5 on 2.6.24-rc7
Signed-off-by: NIngo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
 latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
    -----------------
    | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
    -----------------
 => started at: _spin_lock_irqsave+0x2a/0xb7
 => ended at:   _spin_unlock_irqrestore+0x32/0x5f

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
 swapper-0     1d.s3    0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
 swapper-0     1d.s3  100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
 swapper-0     1d.s3  100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)

vim:ft=help
=======

And this is a trace with ftrace_enabled == 1

=======
preemption latency trace v1.1.5 on 2.6.24-rc7
--------------------------------------------------------------------
 latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
    -----------------
    | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
    -----------------
 => started at: _spin_lock_irqsave+0x2a/0xb7
 => ended at:   _spin_unlock_irqrestore+0x32/0x5f

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
 swapper-0     1dNs3    0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
 swapper-0     1dNs3   46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000])
 swapper-0     1dNs3   46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000])
 swapper-0     1dNs3   46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000])
 swapper-0     1dNs3   47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000])
 swapper-0     1dNs3   47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47)
 swapper-0     1dNs3   97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50)
 swapper-0     1dNs3   98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000])
 swapper-0     1dNs3   99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000])
 swapper-0     1dNs3  101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000])
 swapper-0     1dNs3  102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
 swapper-0     1dNs3  102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)

vim:ft=help
=======
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add each lock class to the all_lock_classes list when it is
first registered.

Previously, lock classes were added to all_lock_classes when
the lock class was first used.  Since one of the uses of the
list is to find unused locks, this didn't work well.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this patch extends the soft-lockup detector to automatically
detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are
printed the following way:

 ------------------>
 INFO: task prctl:3042 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message
 prctl         D fd5e3793     0  3042   2997
        f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286
        f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000
        f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b
 Call Trace:
  [<c04883a5>] schedule_timeout+0x6d/0x8b
  [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17
  [<c0133a76>] msleep+0x10/0x16
  [<c0138974>] sys_prctl+0x30/0x1e2
  [<c0104c52>] sysenter_past_esp+0x5f/0xa5
  =======================
 2 locks held by prctl/3042:
 #0:  (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a
 #1:  (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9
 <------------------

the current default timeout is 120 seconds. Such messages are printed
up to 10 times per bootup. If the system has crashed already then the
messages are not printed.

if lockdep is enabled then all held locks are printed as well.

this feature is a natural extension to the softlockup-detector (kernel
locked up without scheduling) and to the NMI watchdog (kernel locked up
with IRQs disabled).

[ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ]
[ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>

Michael Wu noticed in his lkml post at

    http://marc.info/?l=linux-kernel&m=119396182726091&w=2

that certain wireless drivers ended up having their name in module
memory, which would then crash the kernel on module unload.

The patch he proposed was a bit clumsy in that it increased the size of
a lockdep entry significantly; the patch below tries another approach,
it checks, on module teardown, if the name of a class is in module space
and then zaps the class.  This is very similar to what we already do
with keys that are in module space.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Lockdep, during self-test (when it was simulating double unlocks) was
sometimes unconditionally unlocking a spinlock when it had not been
locked. This won't work for ticket locks.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

make cli/sti annotation warnings easier to interpret.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

Torsten Kaiser wrote:

| static inline int in_range(const void *start, const void *addr, const void *end)
| {
|         return addr >= start && addr <= end;
| }
| This  will return true, if addr is in the range of start (including)
| to end (including).
|
| But debug_check_no_locks_freed() seems does:
| const void *mem_to = mem_from + mem_len
| -> mem_to is the last byte of the freed range, that fits in_range
| lock_from = (void *)hlock->instance;
| -> first byte of the lock
| lock_to = (void *)(hlock->instance + 1);
| -> first byte of the next lock, not last byte of the lock that is being checked!
|
| The test is:
| if (!in_range(mem_from, lock_from, mem_to) &&
|                                         !in_range(mem_from, lock_to, mem_to))
|                         continue;
| So it tests, if the first byte of the lock is in the range that is freed ->OK
| And if the first byte of the *next* lock is in the range that is freed
| -> Not OK.

We can also simplify in_range checks, we need only 2 comparisons, not 4.
If the lock is not in memory range, it should be either at the left of range
or at the right.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

fix the oops that can be seen in:

   http://bugzilla.kernel.org/attachment.cgi?id=13828&action=view

it is not safe to print the locks of running tasks.

(even with this fix we have a small race - but this is a debug
 function after all.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

Fix a typo in the __lock_acquire comment.
Signed-off-by: NGautham R Shenoy <ego@in.ibm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the following scenario:

code path 1:
  my_function() -> lock(L1); ...; flush_workqueue(); ...

code path 2:
  run_workqueue() -> my_work() -> ...; lock(L1); ...

you can get a deadlock when my_work() is queued or running
but my_function() has acquired L1 already.

This patch adds a pseudo-lock to each workqueue to make lockdep
warn about this scenario.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NOleg Nesterov <oleg@tv-sign.ru>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide a check to validate that we do not hold any locks when switching
back to user-space.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is possible for the current->curr_chain_key to become inconsistent with the
current index if the chain fails to validate.  The end result is that future
lock_acquire() operations may inadvertently fail to find a hit in the cache
resulting in a new node being added to the graph for every acquire.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When I started adding support for lockdep to 64-bit powerpc, I got a
lockdep_init_error and with this patch was able to pinpoint why and where
to put lockdep_init().  Let's support this generally for others adding
lockdep support to their architecture.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

    __acquire
        |
       lock _____
        |        \
        |    __contended
        |         |
        |        wait
        | _______/
        |/
        |
   __acquired
        |
   __release
        |
     unlock

We measure acquisition and contention bouncing.

This is done by recording a cpu stamp in each lock instance.

Contention bouncing requires the cpu stamp to be set on acquisition. Hence we
move __acquired into the generic path.

__acquired is then used to measure acquisition bouncing by comparing the
current cpu with the old stamp before replacing it.

__contended is used to measure contention bouncing (only useful for preemptable
locks)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - update the copyright notices
 - use the default hash function
 - fix a thinko in a BUILD_BUG_ON
 - add a WARN_ON to spot inconsitent naming
 - fix a termination issue in /proc/lock_stat

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Present all this fancy new lock statistics information:

*warning, _wide_ output ahead*

(output edited for purpose of brevity)

 # cat /proc/lock_stat
lock_stat version 0.1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
                              class name    contentions   waittime-min   waittime-max waittime-total   acquisitions   holdtime-min   holdtime-max holdtime-total
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

                         &inode->i_mutex:         14458           6.57      398832.75     2469412.23        6768876           0.34    11398383.65   339410830.89
                         ---------------
                         &inode->i_mutex           4486          [<ffffffff802a08f9>] pipe_wait+0x86/0x8d
                         &inode->i_mutex              0          [<ffffffff802a01e8>] pipe_write_fasync+0x29/0x5d
                         &inode->i_mutex              0          [<ffffffff802a0e18>] pipe_read+0x74/0x3a5
                         &inode->i_mutex              0          [<ffffffff802a1a6a>] do_lookup+0x81/0x1ae

.................................................................................................................................................................

              &inode->i_data.tree_lock-W:           491           0.27          62.47         493.89        2477833           0.39         468.89     1146584.25
              &inode->i_data.tree_lock-R:            65           0.44           4.27          48.78       26288792           0.36         184.62    10197458.24
              --------------------------
                &inode->i_data.tree_lock             46          [<ffffffff80277095>] __do_page_cache_readahead+0x69/0x24f
                &inode->i_data.tree_lock             31          [<ffffffff8026f9fb>] add_to_page_cache+0x31/0xba
                &inode->i_data.tree_lock              0          [<ffffffff802770ee>] __do_page_cache_readahead+0xc2/0x24f
                &inode->i_data.tree_lock              0          [<ffffffff8026f6e4>] find_get_page+0x1a/0x58

.................................................................................................................................................................

                      proc_inum_idr.lock:             0           0.00           0.00           0.00             36           0.00          65.60         148.26
                        proc_subdir_lock:             0           0.00           0.00           0.00        3049859           0.00         106.81     1563212.42
                        shrinker_rwsem-W:             0           0.00           0.00           0.00              5           0.00           1.73           3.68
                        shrinker_rwsem-R:             0           0.00           0.00           0.00            633           2.57         246.57       10909.76

'contentions' and 'acquisitions' are the number of such events measured (since
the last reset). The waittime- and holdtime- (min, max, total) numbers are
presented in microseconds.

If there are any contention points, the lock class is presented in the block
format (as i_mutex and tree_lock above), otherwise a single line of output is
presented.

The output is sorted on absolute number of contentions (read + write), this
should get the worst offenders presented first, so that:

 # grep : /proc/lock_stat | head

will quickly show who's bad.

The stats can be reset using:

 # echo 0 > /proc/lock_stat

[bunk@stusta.de: make 2 functions static]
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce the core lock statistics code.

Lock statistics provides lock wait-time and hold-time (as well as the count
of corresponding contention and acquisitions events). Also, the first few
call-sites that encounter contention are tracked.

Lock wait-time is the time spent waiting on the lock. This provides insight
into the locking scheme, that is, a heavily contended lock is indicative of
a too coarse locking scheme.

Lock hold-time is the duration the lock was held, this provides a reference for
the wait-time numbers, so they can be put into perspective.

  1)
    lock
  2)
    ... do stuff ..
    unlock
  3)

The time between 1 and 2 is the wait-time. The time between 2 and 3 is the
hold-time.

The lockdep held-lock tracking code is reused, because it already collects locks
into meaningful groups (classes), and because it is an existing infrastructure
for lock instrumentation.

Currently lockdep tracks lock acquisition with two hooks:

  lock()
    lock_acquire()
    _lock()

 ... code protected by lock ...

  unlock()
    lock_release()
    _unlock()

We need to extend this with two more hooks, in order to measure contention.

  lock_contended() - used to measure contention events
  lock_acquired()  - completion of the contention

These are then placed the following way:

  lock()
    lock_acquire()
    if (!_try_lock())
      lock_contended()
      _lock()
      lock_acquired()

 ... do locked stuff ...

  unlock()
    lock_release()
    _unlock()

(Note: the try_lock() 'trick' is used to avoid instrumenting all platform
       dependent lock primitive implementations.)

It is also possible to toggle the two lockdep features at runtime using:

  /proc/sys/kernel/prove_locking
  /proc/sys/kernel/lock_stat

(esp. turning off the O(n^2) prove_locking functionaliy can help)

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: nuke unneeded ifdefs]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move code around to get fewer but larger #ifdef sections.  Break some
in-function #ifdefs out into their own functions.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ensure that all of the lock dependency tracking code is under
CONFIG_PROVE_LOCKING.  This allows us to use the held lock tracking code for
other purposes.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

KSYM_NAME_LEN is peculiar in that it does not include the space for the
trailing '\0', forcing all users to use KSYM_NAME_LEN + 1 when allocating
buffer.  This is nonsense and error-prone.  Moreover, when the caller
forgets that it's very likely to subtly bite back by corrupting the stack
because the last position of the buffer is always cleared to zero.

This patch increments KSYM_NAME_LEN by one and updates code accordingly.

* off-by-one bug in asm-powerpc/kprobes.h::kprobe_lookup_name() macro
  is fixed.

* Where MODULE_NAME_LEN and KSYM_NAME_LEN were used together,
  MODULE_NAME_LEN was treated as if it didn't include space for the
  trailing '\0'.  Fix it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NPaulo Marques <pmarques@grupopie.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It looks like a remainder from designing...
Signed-off-by: NJarek Poplawski <jarkao@o2.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several kallsyms_lookup() pass dummy arguments but only need, say, module's
name.  Make kallsyms_lookup() accept NULLs where possible.

Also, makes picture clearer about what interfaces are needed for all symbol
resolving business.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplify the stacktrace code:

 - remove the unused task argument to save_stack_trace, it's always
   current
 - remove the all_contexts flag, it's alwasy 0
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <ak@suse.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lockdep's data shouldn't be used when debug_locks == 0 because it's not
updated after this, so it's more misleading than helpful.

PS: probably lockdep's current-> fields should be reset after it turns
debug_locks off: so, after printing a bug report, but before return from
exported functions, but there are really a lot of these possibilities (e.g.
 after DEBUG_LOCKS_WARN_ON), so, something could be missed.  (Of course
direct use of this fields isn't recommended either.)
Reported-by: NFolkert van Heusden <folkert@vanheusden.com>
Inspired-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>