- 18 10月, 2010 4 次提交
-
-
由 Matt Carlson 提交于
5718 B0 and 5719 devices will use a new selfboot firmware format. This patch adds code to detect the new format so that bootcode versions get reported correctly. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the standard macro to put this table in __devinitconst. Compiled, untested. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Reported-by: NArmando Visconti <armando.visconti@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Suppress a large block of warnings like: drivers/net/niu.c:7094:38: warning: incorrect type in assignment (different base types) drivers/net/niu.c:7094:38: expected restricted __be32 [usertype] ip4src drivers/net/niu.c:7094:38: got unsigned long long drivers/net/niu.c:7104:17: warning: cast from restricted __be32 ... Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 10月, 2010 9 次提交
-
-
由 Randy Dunlap 提交于
We have USB, PCMCIA, and gigabit ethernet drivers that select MII even though NET_ETHERNET is not enabled, so make MII not be dependent on NET_ETHERNET. It is still dependent on NET and NETDEVICES. Fixes kconfig unmet dependency warning (shortened, was very long string): warning: (ARM_AT91_ETHER && NETDEVICES && NET_ETHERNET && ARM && ARCH_AT91RM9200 || ARM_KS8695_ETHER && NETDEVICES && NET_ETHERNET && ARM && ARCH_KS8695 || ... || IP1000 && NETDEVICES && NETDEV_1000 && PCI && EXPERIMENTAL || HAMACHI && NETDEVICES && NETDEV_1000 && PCI || R8169 && NETDEVICES && NETDEV_1000 && PCI || SIS190 && NETDEVICES && NETDEV_1000 && PCI || VIA_VELOCITY && NETDEVICES && NETDEV_1000 && PCI || ATL1 && NETDEVICES && NETDEV_1000 && PCI || ATL1E && NETDEVICES && NETDEV_1000 && PCI && EXPERIMENTAL || ATL1C && NETDEVICES && NETDEV_1000 && PCI && EXPERIMENTAL || JME && NETDEVICES && NETDEV_1000 && PCI || STMMAC_ETH && NETDEV_1000 && NETDEVICES && HAS_IOMEM || USB_PEGASUS && NETDEVICES && USB && NET || USB_RTL8150 && NETDEVICES && USB && NET && EXPERIMENTAL || USB_USBNET && NETDEVICES && USB && NET || PCMCIA_SMC91C92 && NETDEVICES && NET_PCMCIA && PCMCIA) selects MII which has unmet direct dependencies (NETDEVICES && NET_ETHERNET) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> [2006-NOV-30] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
These tables only contain function pointers. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
Full duplex only. Half duplex 1000 Mbps is not supported. Signed-off-by: NDavid Lv <DavidLv@viatech.com.cn> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Tested-by: NSeguier Regis <rseguier@e-teleport.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Add ethtool stats support. Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
There were no curly braces in this if condition so it always enabled full duplex. And ecmd->speed is an unsigned short so it is never equal to -1. The effect is that mii_ethtool_sset() fails with -EINVAL and an error is printed to dmesg. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Their doesn't appear to be bugs with the endianness handling here, just get the annotations right to keep sparse happy. Suppresses the following sparse warnings: drivers/net/dnet.c:30:5: warning: symbol 'dnet_readw_mac' was not declared. Should it be static? drivers/net/dnet.c:49:6: warning: symbol 'dnet_writew_mac' was not declared. Should it be static? drivers/net/dnet.c:364:5: warning: symbol 'dnet_phy_marvell_fixup' was not declared. Should it be static? drivers/net/dnet.c:66:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:66:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:66:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:68:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:68:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:68:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:70:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:70:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:70:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:92:27: warning: cast to restricted __be16 drivers/net/dnet.c:94:33: warning: cast to restricted __be16 drivers/net/dnet.c:96:33: warning: cast to restricted __be16 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Single bit signed bitfields don't make a lot of sense, noticed by sparse: drivers/net/cxgb4vf/t4vf_common.h:135:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:136:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:137:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:138:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:139:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:140:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:141:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:142:35: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:143:35: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:154:27: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:155:26: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:156:27: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:157:26: error: dubious one-bit signed bitfield Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Using standard skb allocations in r8169 leads to order-3 allocations (if PAGE_SIZE=4096), because NIC needs 16383 bytes, and skb overhead makes this bigger than 16384 -> 32768 bytes per "skb" Using kmalloc() permits to reduce memory requirements of one r8169 nic by 4Mbytes. (256 frames * 16Kbytes). This is fine since a hardware bug requires us to copy incoming frames, so we build real skb when doing this copy. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2010 1 次提交
-
-
由 John Fastabend 提交于
Remove a DCB check config from DCB configuration we continue to configure DCB even if it fails so don't even bother to check. Plus user space (lldpad) checks this before programming the hw anyways. Worse case is we program some values into the hw that don't make total sense resulting in incorrect bandwidth allocation. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2010 11 次提交
-
-
由 Carolyn Wyborny 提交于
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emil Tantilov 提交于
Following patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emil Tantilov 提交于
Remove functions that are declared, but not used in the driver. This patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add new interrupt ack functions and other hardware interface logic to support the new device. Update version to 2.2.6. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
During cnic shutdown, the original driver code requires userspace to close the uio device within a few seconds. This doesn't always happen as the userapp may be hung or otherwise take a long time to close. The system may crash when this happens. We fix the problem by decoupling the uio structures from the cnic structures during cnic shutdown. We do not unregister the uio device until the cnic driver is unloaded. This eliminates the unreliable wait loop for uio to close. All uio structures are kept in a linked list. If the device is shutdown and later brought back up again, the uio strcture will be found in the linked list and coupled back to the cnic structures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
and put all uio related structures and ring buffers in it. This allows uio operations to be done independent of the cnic device structures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
to free all UIO related structures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The bnx2x devices require a 2 second quiet time before sending the last RAMROD command to destroy a connection. This sleep wait adds up to a long delay when iscsid is serially destroying maultiple connections. Create a workqueue to perform the final connection cleanup in the background to speed up the process. This significantly speeds up the process as the wait time can be done in parallel for multiple connections. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Refactoring code for the next patch to defer connection clean up. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
so that we can additional bit definitions without requiring a spinlock. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
to reduce some duplicate code. Also, use tasklet_kill() in cnic_free_irq() to wait for the cnic_irq_task to complete. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2010 1 次提交
-
-
由 Dmitry Kravkov 提交于
Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Tested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 10月, 2010 4 次提交
-
-
由 Michael Chan 提交于
To prevent unnecessary error message. pci_save_state() is also moved to the end of ->probe() so that all PCI config, including AER state, will be saved. Update version to 2.0.18. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
- Improved flow control and simplified interface - Use hardware RSS indirection table instead of the slower firmware- based table - Lower latency interrupt on 5709 Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Slaby 提交于
Stanse found that pch_gbe_xmit_frame uses skb after it is freed. Fix that. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Slaby 提交于
Stanse found that i2400m_rx frees skb, but still uses skb->len even though it has skb_len defined. So use skb_len properly in the code. And also define it unsinged int rather than size_t to solve compilation warnings. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: linux-wimax@intel.com Acked-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2010 2 次提交
-
-
由 Oskar Schirmer 提交于
with hardware slow in negotiation, the system did freeze while trying to mount root on nfs at boot time. the link state has not been initialised so network stack tried to start transmission right away. this caused instant retries, as the driver solely stated business upon link down, rendering the system unusable. notify carrier off initially to prevent transmission until phylib will report link up. Signed-off-by: NOskar Schirmer <oskar@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
Test whether index exceeds fw->size before reading the element Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
-
- 10 10月, 2010 5 次提交
-
-
由 Eric Dumazet 提交于
sundance get_stats() should not be run concurrently, add a lock to avoid potential losses. Note: Remove unused rx_lock field Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Kaiser 提交于
Simplify: ((a && !b) || (!a && b)) => (a != b) Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Kaiser 提交于
Simplify: ((a && b) || (!a && !b)) => (a == b) Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Acked-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Use DMA API as PCI equivalents will be deprecated. This change also allow to allocate with GFP_KERNEL where possible. Tested-by: NNeal Becker <ndbecker2@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
We have fedora bug report where driver fail to initialize after suspend/resume because of memory allocation errors: https://bugzilla.redhat.com/show_bug.cgi?id=629158 To fix use GFP_KERNEL allocation where possible. Tested-by: NNeal Becker <ndbecker2@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2010 3 次提交
-
-
由 Amit Kumar Salecha 提交于
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
This patch just rename all P3 #define to P3P. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Allow promiscous mode setting for VF's depending upon the configuration. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-