Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 09 4月, 2014 7 次提交
  3. 08 4月, 2014 1 次提交
  5. 07 4月, 2014 4 次提交
  7. 24 3月, 2014 4 次提交
  9. 20 3月, 2014 5 次提交
  11. 12 3月, 2014 1 次提交
    • G
      of: Make device nodes kobjects so they show up in sysfs · 75b57ecf
      由 Grant Likely 提交于 
      Device tree nodes are already treated as objects, and we already want to
expose them to userspace which is done using the /proc filesystem today.
Right now the kernel has to do a lot of work to keep the /proc view in
sync with the in-kernel representation. If device_nodes are switched to
be kobjects then the device tree code can be a whole lot simpler. It
also turns out that switching to using /sysfs from /proc results in
smaller code and data size, and the userspace ABI won't change if
/proc/device-tree symlinks to /sys/firmware/devicetree/base.

v7: Add missing sysfs_bin_attr_init()
v6: Add __of_add_property() early init fixes from Pantelis
v5: Rename firmware/ofw to firmware/devicetree
    Fix updating property values in sysfs
v4: Fixed build error on Powerpc
    Fixed handling of dynamic nodes on powerpc
v3: Fixed handling of duplicate attribute and child node names
v2: switch to using sysfs bin_attributes which solve the problem of
    reporting incorrect property size.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
      75b57ecf
  13. 11 3月, 2014 1 次提交
    • J
      mm: fix GFP_THISNODE callers and clarify · e97ca8e5
      由 Johannes Weiner 提交于 
      GFP_THISNODE is for callers that implement their own clever fallback to
remote nodes.  It restricts the allocation to the specified node and
does not invoke reclaim, assuming that the caller will take care of it
when the fallback fails, e.g.  through a subsequent allocation request
without GFP_THISNODE set.

However, many current GFP_THISNODE users only want the node exclusive
aspect of the flag, without actually implementing their own fallback or
triggering reclaim if necessary.  This results in things like page
migration failing prematurely even when there is easily reclaimable
memory available, unless kswapd happens to be running already or a
concurrent allocation attempt triggers the necessary reclaim.

Convert all callsites that don't implement their own fallback strategy
to __GFP_THISNODE.  This restricts the allocation a single node too, but
at the same time allows the allocator to enter the slowpath, wake
kswapd, and invoke direct reclaim if necessary, to make the allocation
happen when memory is full.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e97ca8e5
  15. 07 3月, 2014 9 次提交
    • S
      powerpc/powernv Platform dump interface · c7e64b9c
      由 Stewart Smith 提交于 
      This enables support for userspace to fetch and initiate FSP and
Platform dumps from the service processor (via firmware) through sysfs.

Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com>

Flow:
  - We register for OPAL notification events.
  - OPAL sends new dump available notification.
  - We make information on dump available via sysfs
  - Userspace requests dump contents
  - We retrieve the dump via OPAL interface
  - User copies the dump data
  - userspace sends ack for dump
  - We send ACK to OPAL.

sysfs files:
  - We add the /sys/firmware/opal/dump directory
  - echoing 1 (well, anything, but in future we may support
    different dump types) to /sys/firmware/opal/dump/initiate_dump
    will initiate a dump.
  - Each dump that we've been notified of gets a directory
    in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex,
    as this is what's used elsewhere to identify the dump).
  - Each dump has files: id, type, dump and acknowledge
    dump is binary and is the dump itself.
    echoing 'ack' to acknowledge (currently any string will do) will
    acknowledge the dump and it will soon after disappear from sysfs.

OPAL APIs:
  - opal_dump_init()
  - opal_dump_info()
  - opal_dump_read()
  - opal_dump_ack()
  - opal_dump_resend_notification()

Currently we are only ever notified for one dump at a time (until
the user explicitly acks the current dump, then we get a notification
of the next dump), but this kernel code should "just work" when OPAL
starts notifying us of all the dumps present.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      c7e64b9c
    • S
      powerpc/powernv: Read OPAL error log and export it through sysfs · 774fea1a
      由 Stewart Smith 提交于 
      Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

This patch adds support to read error logs from OPAL and export
them to userspace through a sysfs interface.

We export each log entry as a directory in /sys/firmware/opal/elog/

Currently, OPAL will buffer up to 128 error log records, we don't
need to have any knowledge of this limit on the Linux side as that
is actually largely transparent to us.

Each error log entry has the following files: id, type, acknowledge, raw.
Currently we just export the raw binary error log in the 'raw' attribute.
In a future patch, we may parse more of the error log to make it a bit
easier for userspace (e.g. to be able to display a brief summary in
petitboot without having to have a full parser).

If we have >128 logs from OPAL, we'll only be notified of 128 until
userspace starts acknowledging them. This limitation may be lifted in
the future and with this patch, that should "just work" from the linux side.

A userspace daemon should:
- wait for error log entries using normal mechanisms (we announce creation)
- read error log entry
- save error log entry safely to disk
- acknowledge the error log entry
- rinse, repeat.

On the Linux side, we read the error log when we're notified of it. This
possibly isn't ideal as it would be better to only read them on-demand.
However, this doesn't really work with current OPAL interface, so we
read the error log immediately when notified at the moment.

I've tested this pretty extensively and am rather confident that the
linux side of things works rather well. There is currently an issue with
the service processor side of things for >128 error logs though.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      774fea1a
    • T
      powerpc/pseries: Expose in kernel device tree update to drmgr · 9da34892
      由 Tyrel Datwyler 提交于 
      Traditionally it has been drmgr's responsibilty to update the device tree
through the /proc/ppc64/ofdt interface after a suspend/resume operation.
This patchset however has modified suspend/resume ops to preform an update
entirely in the kernel during the resume. Therefore, a mechanism is required
to expose that information to drmgr.

This patch adds a show function to the "hibernate" attribute that returns 1
if the kernel performs a device tree update after the resume and 0 otherwise.
This allows newer versions of drmgr to avoid doing a second unnecessary
device tree update.
Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      9da34892
    • H
      powerpc/pseries: Update dynamic cache nodes for suspend/resume operation · 6b36ba84
      由 Haren Myneni 提交于 
      pHyp can change cache nodes for suspend/resume operation. Currently the
device tree is updated by drmgr in userspace after all non boot CPUs are
enabled. Hence, we do not modify the cache list based on the latest cache
nodes. Also we do not remove cache entries for the primary CPU.

This patch removes the cache list for the boot CPU, updates the device tree
before enabling nonboot CPUs and adds cache list for the boot cpu.

This patch also has the side effect that older versions of drmgr will
perform a second device tree update from userspace. While this is a
redundant waste of a couple cycles it is harmless since firmware returns the
same data for the subsequent update-nodes/properties rtas calls.
Signed-off-by: NHaren Myneni <hbabu@us.ibm.com>
Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      6b36ba84
    • H
      powerpc/pseries: Device tree should only be updated once after suspend/migrate · 39a33b59
      由 Haren Myneni 提交于 
      The current code makes rtas calls for update-nodes, activate-firmware and then
update-nodes again. The FW provides the same data for both update-nodes calls.
As a result a proc entry exists error is reported for the second update while
adding device nodes.

This patch makes a single rtas call for update-nodes after activating the FW.
It also add rtas_busy delay for the activate-firmware rtas call.
Signed-off-by: NHaren Myneni <hbabu@us.ibm.com>
Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      39a33b59
    • P
      powerpc: Delete old PrPMC 280/2800 support · 3c8464a9
      由 Paul Gortmaker 提交于 
      This processor/memory module was mostly used on ATCA blades and
before that, on cPCI blades.  It wasn't really user friendly, with
custom non u-boot bootloaders (powerboot/motload) and no real way
to recover corrupted boot flash (which was a common problem).

As such, it had its day back before the big ppc --> powerpc move
to device trees, and that was largely through commercial BSPs that
started to dry up around 2007.

Systems using one were largely in a "deploy and sustain" mode,
so interest in upgrading to new kernels in the field was nil.
Also, requiring 50A, 48V power supplies and a 2'x2'x2' ATCA
chassis largely rules out any hobbyist/enthusiast interest.

The point of all this, is that we might as well delete the in
kernel files relating to this platform.  No point in continuing
to build it via walking the defconfigs or via linux-next testing.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      3c8464a9
    • N
      powerpc/pseries: Use remove_memory() to remove memory · 9ac8cde9
      由 Nathan Fontenot 提交于 
      The memory remove code for powerpc/pseries should call remove_memory()
so that we are holding the hotplug_memory lock during memory remove
operations.

This patch updates the memory node remove handler to call remove_memory()
and adds a ppc_md.remove_memory() entry to handle pseries specific work
that is called from arch_remove_memory().

During memory remove in pseries_remove_memblock() we have to stay with
removing memory one section at a time. This is needed because of how memory
resources are handled. During memory add for pseries (via the probe file in
sysfs) we add memory one section at a time which gives us a memory resource
for each section. Future patches will aim to address this so will not have
to remove memory one section at a time.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      9ac8cde9
    • M
      powerpc/book3s: Recover from MC in sapphire on SCOM read via MMIO. · 55672ecf
      由 Mahesh Salgaonkar 提交于 
      Detect and recover from machine check when inside opal on a special
scom load instructions. On specific SCOM read via MMIO we may get a machine
check exception with SRR0 pointing inside opal. To recover from MC
in this scenario, get a recovery instruction address and return to it from
MC.

OPAL will export the machine check recoverable ranges through
device tree node mcheck-recoverable-ranges under ibm,opal:

# hexdump /proc/device-tree/ibm,opal/mcheck-recoverable-ranges
0000000 0000 0000 3000 2804 0000 000c 0000 0000
0000010 3000 2814 0000 0000 3000 27f0 0000 000c
0000020 0000 0000 3000 2814 xxxx xxxx xxxx xxxx
0000030 llll llll yyyy yyyy yyyy yyyy
...
...
#

where:
	xxxx xxxx xxxx xxxx = Starting instruction address
	llll llll           = Length of the address range.
	yyyy yyyy yyyy yyyy = recovery address

Each recoverable address range entry is (start address, len,
recovery address), 2 cells each for start and recovery address, 1 cell for
len, totalling 5 cells per entry. During kernel boot time, build up the
recovery table with the list of recovery ranges from device-tree node which
will be used during machine check exception to recover from MMIO SCOM UE.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      55672ecf
    • B
      powerpc/pseries: Don't try to register pseries cpu hotplug on non-pseries · d2a36071
      由 Benjamin Herrenschmidt 提交于 
      This results in oddball messages at boot on other platforms telling us
that CPU hotplug isn't supported even when it is.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      d2a36071
  17. 05 3月, 2014 3 次提交
  19. 28 2月, 2014 4 次提交
  21. 23 2月, 2014 1 次提交