- 14 3月, 2016 2 次提交
-
-
由 Adam Buchbinder 提交于
Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Ashish Samant 提交于
Dont print warning for ENOSPC error unless ENOSPC_DEBUG is enabled. Use btrfs_debug if it is enabled. Signed-off-by: NAshish Samant <ashish.samant@oracle.com> [ preserve the WARN_ON ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 12 3月, 2016 4 次提交
-
-
由 Dan Carpenter 提交于
It's basically harmless if "ref_level" isn't initialized since it's only used for an error message, but it causes a static checker warning. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
So that its better organized. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
So that it indicates what it does. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Satoru Takeuchi 提交于
It's better to show a warning message for the exceptional case that one of objectid (in most case, inode number) reaches its highest value. For example, if inode cache is off and this event happens, we can't create any file even if there are not so many files. This message ease detecting such problem. Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 11 3月, 2016 1 次提交
-
-
由 Rasmus Villemoes 提交于
This is more readable. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 02 3月, 2016 7 次提交
-
-
由 Filipe Manana 提交于
When logging that an inode exists, for example as part of a directory fsync operation, we were collecting any ordered extents for the inode but we ended up doing nothing with them except tagging them as processed, by setting the flag BTRFS_ORDERED_LOGGED on them, which prevented a subsequent fsync of that inode (using the LOG_INODE_ALL mode) from collecting and processing them. This created a time window where a second fsync against the inode, using the fast path, ended up not logging the checksums for the new extents but it logged the extents since they were part of the list of modified extents. This happened because the ordered extents were not collected and checksums were not yet added to the csum tree - the ordered extents have not gone through btrfs_finish_ordered_io() yet (which is where we add them to the csum tree by calling inode.c:add_pending_csums()). So fix this by not collecting an inode's ordered extents if we are logging it with the LOG_INODE_EXISTS mode. Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Filipe Manana 提交于
If we're about to do a fast fsync for an inode and btrfs_inode_in_log() returns false, it's possible that we had an ordered extent in progress (btrfs_finish_ordered_io() not run yet) when we noticed that the inode's last_trans field was not greater than the id of the last committed transaction, but shortly after, before we checked if there were any ongoing ordered extents, the ordered extent had just completed and removed itself from the inode's ordered tree, in which case we end up not logging the inode, losing some data if a power failure or crash happens after the fsync handler returns and before the transaction is committed. Fix this by checking first if there are any ongoing ordered extents before comparing the inode's last_trans with the id of the last committed transaction - when it completes, an ordered extent always updates the inode's last_trans before it removes itself from the inode's ordered tree (at btrfs_finish_ordered_io()). Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Filipe Manana 提交于
In the listxattrs handler, we were not listing all the xattrs that are packed in the same btree item, which happens when multiple xattrs have a name that when crc32c hashed produce the same checksum value. Fix this by processing them all. The following test case for xfstests reproduces the issue: seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { cd / rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter . ./common/attr # real QA test starts here _supported_fs generic _supported_os Linux _require_scratch _require_attrs rm -f $seqres.full _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount # Create our test file with a few xattrs. The first 3 xattrs have a name # that when given as input to a crc32c function result in the same checksum. # This made btrfs list only one of the xattrs through listxattrs system call # (because it packs xattrs with the same name checksum into the same btree # item). touch $SCRATCH_MNT/testfile $SETFATTR_PROG -n user.foobar -v 123 $SCRATCH_MNT/testfile $SETFATTR_PROG -n user.WvG1c1Td -v qwerty $SCRATCH_MNT/testfile $SETFATTR_PROG -n user.J3__T_Km3dVsW_ -v hello $SCRATCH_MNT/testfile $SETFATTR_PROG -n user.something -v pizza $SCRATCH_MNT/testfile $SETFATTR_PROG -n user.ping -v pong $SCRATCH_MNT/testfile # Now call getfattr with --dump, which calls the listxattrs system call. # It should list all the xattrs we have set before. $GETFATTR_PROG --absolute-names --dump $SCRATCH_MNT/testfile | _filter_scratch status=0 exit Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Filipe Manana 提交于
While running a test with a mix of buffered IO and direct IO against the same files I hit a deadlock reported by the following trace: [11642.140352] INFO: task kworker/u32:3:15282 blocked for more than 120 seconds. [11642.142452] Not tainted 4.4.0-rc6-btrfs-next-21+ #1 [11642.143982] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11642.146332] kworker/u32:3 D ffff880230ef7988 [11642.147737] systemd-journald[571]: Sent WATCHDOG=1 notification. [11642.149771] 0 15282 2 0x00000000 [11642.151205] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] [11642.154074] ffff880230ef7988 0000000000000246 0000000000014ec0 ffff88023ec94ec0 [11642.156722] ffff880233fe8f80 ffff880230ef8000 ffff88023ec94ec0 7fffffffffffffff [11642.159205] 0000000000000002 ffffffff8147b7f9 ffff880230ef79a0 ffffffff8147b541 [11642.161403] Call Trace: [11642.162129] [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f [11642.163396] [<ffffffff8147b541>] schedule+0x82/0x9a [11642.164871] [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109 [11642.167020] [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f [11642.167931] [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197 [11642.182320] [<ffffffff8108affa>] ? trace_hardirqs_on+0xd/0xf [11642.183762] [<ffffffff810b079b>] ? timekeeping_get_ns+0xe/0x33 [11642.185308] [<ffffffff810b0f61>] ? ktime_get+0x41/0x52 [11642.186782] [<ffffffff8147ac08>] io_schedule_timeout+0xa0/0x102 [11642.188217] [<ffffffff8147ac08>] ? io_schedule_timeout+0xa0/0x102 [11642.189626] [<ffffffff8147b814>] bit_wait_io+0x1b/0x39 [11642.190803] [<ffffffff8147bb21>] __wait_on_bit_lock+0x4c/0x90 [11642.192158] [<ffffffff8111829f>] __lock_page+0x66/0x68 [11642.193379] [<ffffffff81082f29>] ? autoremove_wake_function+0x3a/0x3a [11642.194831] [<ffffffffa0450ddd>] lock_page+0x31/0x34 [btrfs] [11642.197068] [<ffffffffa0454e3b>] extent_write_cache_pages.isra.19.constprop.35+0x1af/0x2f4 [btrfs] [11642.199188] [<ffffffffa0455373>] extent_writepages+0x4b/0x5c [btrfs] [11642.200723] [<ffffffffa043c913>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs] [11642.202465] [<ffffffffa043aa82>] btrfs_writepages+0x28/0x2a [btrfs] [11642.203836] [<ffffffff811236bc>] do_writepages+0x23/0x2c [11642.205624] [<ffffffff811198c9>] __filemap_fdatawrite_range+0x5a/0x61 [11642.207057] [<ffffffff81119946>] filemap_fdatawrite_range+0x13/0x15 [11642.208529] [<ffffffffa044f87e>] btrfs_start_ordered_extent+0xd0/0x1a1 [btrfs] [11642.210375] [<ffffffffa0462613>] ? btrfs_scrubparity_helper+0x140/0x33a [btrfs] [11642.212132] [<ffffffffa044f974>] btrfs_run_ordered_extent_work+0x25/0x34 [btrfs] [11642.213837] [<ffffffffa046262f>] btrfs_scrubparity_helper+0x15c/0x33a [btrfs] [11642.215457] [<ffffffffa046293b>] btrfs_flush_delalloc_helper+0xe/0x10 [btrfs] [11642.217095] [<ffffffff8106483e>] process_one_work+0x256/0x48b [11642.218324] [<ffffffff81064f20>] worker_thread+0x1f5/0x2a7 [11642.219466] [<ffffffff81064d2b>] ? rescuer_thread+0x289/0x289 [11642.220801] [<ffffffff8106a500>] kthread+0xd4/0xdc [11642.222032] [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24 [11642.223190] [<ffffffff8147fdef>] ret_from_fork+0x3f/0x70 [11642.224394] [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24 [11642.226295] 2 locks held by kworker/u32:3/15282: [11642.227273] #0: ("%s-%s""btrfs", name){++++.+}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b [11642.229412] #1: ((&work->normal_work)){+.+.+.}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b [11642.231414] INFO: task kworker/u32:8:15289 blocked for more than 120 seconds. [11642.232872] Not tainted 4.4.0-rc6-btrfs-next-21+ #1 [11642.234109] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11642.235776] kworker/u32:8 D ffff88020de5f848 0 15289 2 0x00000000 [11642.237412] Workqueue: writeback wb_workfn (flush-btrfs-481) [11642.238670] ffff88020de5f848 0000000000000246 0000000000014ec0 ffff88023ed54ec0 [11642.240475] ffff88021b1ece40 ffff88020de60000 ffff88023ed54ec0 7fffffffffffffff [11642.242154] 0000000000000002 ffffffff8147b7f9 ffff88020de5f860 ffffffff8147b541 [11642.243715] Call Trace: [11642.244390] [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f [11642.245432] [<ffffffff8147b541>] schedule+0x82/0x9a [11642.246392] [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109 [11642.247479] [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f [11642.248551] [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197 [11642.249968] [<ffffffff8108affa>] ? trace_hardirqs_on+0xd/0xf [11642.251043] [<ffffffff810b079b>] ? timekeeping_get_ns+0xe/0x33 [11642.252202] [<ffffffff810b0f61>] ? ktime_get+0x41/0x52 [11642.253210] [<ffffffff8147ac08>] io_schedule_timeout+0xa0/0x102 [11642.254307] [<ffffffff8147ac08>] ? io_schedule_timeout+0xa0/0x102 [11642.256118] [<ffffffff8147b814>] bit_wait_io+0x1b/0x39 [11642.257131] [<ffffffff8147bb21>] __wait_on_bit_lock+0x4c/0x90 [11642.258200] [<ffffffff8111829f>] __lock_page+0x66/0x68 [11642.259168] [<ffffffff81082f29>] ? autoremove_wake_function+0x3a/0x3a [11642.260516] [<ffffffffa0450ddd>] lock_page+0x31/0x34 [btrfs] [11642.261841] [<ffffffffa0454e3b>] extent_write_cache_pages.isra.19.constprop.35+0x1af/0x2f4 [btrfs] [11642.263531] [<ffffffffa0455373>] extent_writepages+0x4b/0x5c [btrfs] [11642.264747] [<ffffffffa043c913>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs] [11642.266148] [<ffffffffa043aa82>] btrfs_writepages+0x28/0x2a [btrfs] [11642.267264] [<ffffffff811236bc>] do_writepages+0x23/0x2c [11642.268280] [<ffffffff81192a2b>] __writeback_single_inode+0xda/0x5ba [11642.269407] [<ffffffff811939f0>] writeback_sb_inodes+0x27b/0x43d [11642.270476] [<ffffffff81193c28>] __writeback_inodes_wb+0x76/0xae [11642.271547] [<ffffffff81193ea6>] wb_writeback+0x19e/0x41c [11642.272588] [<ffffffff81194821>] wb_workfn+0x201/0x341 [11642.273523] [<ffffffff81194821>] ? wb_workfn+0x201/0x341 [11642.274479] [<ffffffff8106483e>] process_one_work+0x256/0x48b [11642.275497] [<ffffffff81064f20>] worker_thread+0x1f5/0x2a7 [11642.276518] [<ffffffff81064d2b>] ? rescuer_thread+0x289/0x289 [11642.277520] [<ffffffff81064d2b>] ? rescuer_thread+0x289/0x289 [11642.278517] [<ffffffff8106a500>] kthread+0xd4/0xdc [11642.279371] [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24 [11642.280468] [<ffffffff8147fdef>] ret_from_fork+0x3f/0x70 [11642.281607] [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24 [11642.282604] 3 locks held by kworker/u32:8/15289: [11642.283423] #0: ("writeback"){++++.+}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b [11642.285629] #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b [11642.287538] #2: (&type->s_umount_key#37){+++++.}, at: [<ffffffff81171217>] trylock_super+0x1b/0x4b [11642.289423] INFO: task fdm-stress:26848 blocked for more than 120 seconds. [11642.290547] Not tainted 4.4.0-rc6-btrfs-next-21+ #1 [11642.291453] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11642.292864] fdm-stress D ffff88022c107c20 0 26848 26591 0x00000000 [11642.294118] ffff88022c107c20 000000038108affa 0000000000014ec0 ffff88023ed54ec0 [11642.295602] ffff88013ab1ca40 ffff88022c108000 ffff8800b2fc19d0 00000000000e0fff [11642.297098] ffff8800b2fc19b0 ffff88022c107c88 ffff88022c107c38 ffffffff8147b541 [11642.298433] Call Trace: [11642.298896] [<ffffffff8147b541>] schedule+0x82/0x9a [11642.299738] [<ffffffffa045225d>] lock_extent_bits+0xfe/0x1a3 [btrfs] [11642.300833] [<ffffffff81082eef>] ? add_wait_queue_exclusive+0x44/0x44 [11642.301943] [<ffffffffa0447516>] lock_and_cleanup_extent_if_need+0x68/0x18e [btrfs] [11642.303270] [<ffffffffa04485ba>] __btrfs_buffered_write+0x238/0x4c1 [btrfs] [11642.304552] [<ffffffffa044b50a>] ? btrfs_file_write_iter+0x17c/0x408 [btrfs] [11642.305782] [<ffffffffa044b682>] btrfs_file_write_iter+0x2f4/0x408 [btrfs] [11642.306878] [<ffffffff8116e298>] __vfs_write+0x7c/0xa5 [11642.307729] [<ffffffff8116e7d1>] vfs_write+0x9d/0xe8 [11642.308602] [<ffffffff8116efbb>] SyS_write+0x50/0x7e [11642.309410] [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b [11642.310403] 3 locks held by fdm-stress/26848: [11642.311108] #0: (&f->f_pos_lock){+.+.+.}, at: [<ffffffff811877e8>] __fdget_pos+0x3a/0x40 [11642.312578] #1: (sb_writers#11){.+.+.+}, at: [<ffffffff811706ee>] __sb_start_write+0x5f/0xb0 [11642.314170] #2: (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa044b401>] btrfs_file_write_iter+0x73/0x408 [btrfs] [11642.316796] INFO: task fdm-stress:26849 blocked for more than 120 seconds. [11642.317842] Not tainted 4.4.0-rc6-btrfs-next-21+ #1 [11642.318691] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11642.319959] fdm-stress D ffff8801964ffa68 0 26849 26591 0x00000000 [11642.321312] ffff8801964ffa68 00ff8801e9975f80 0000000000014ec0 ffff88023ed94ec0 [11642.322555] ffff8800b00b4840 ffff880196500000 ffff8801e9975f20 0000000000000002 [11642.323715] ffff8801e9975f18 ffff8800b00b4840 ffff8801964ffa80 ffffffff8147b541 [11642.325096] Call Trace: [11642.325532] [<ffffffff8147b541>] schedule+0x82/0x9a [11642.326303] [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109 [11642.327180] [<ffffffff8108ae40>] ? mark_held_locks+0x5e/0x74 [11642.328114] [<ffffffff8147f30e>] ? _raw_spin_unlock_irq+0x2c/0x4a [11642.329051] [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197 [11642.330053] [<ffffffff8147bceb>] __wait_for_common+0x109/0x147 [11642.330952] [<ffffffff8147bceb>] ? __wait_for_common+0x109/0x147 [11642.331869] [<ffffffff8147e7bb>] ? usleep_range+0x4a/0x4a [11642.332925] [<ffffffff81074075>] ? wake_up_q+0x47/0x47 [11642.333736] [<ffffffff8147bd4d>] wait_for_completion+0x24/0x26 [11642.334672] [<ffffffffa044f5ce>] btrfs_wait_ordered_extents+0x1c8/0x217 [btrfs] [11642.335858] [<ffffffffa0465b5a>] btrfs_mksubvol+0x224/0x45d [btrfs] [11642.336854] [<ffffffff81082eef>] ? add_wait_queue_exclusive+0x44/0x44 [11642.337820] [<ffffffffa0465edb>] btrfs_ioctl_snap_create_transid+0x148/0x17a [btrfs] [11642.339026] [<ffffffffa046603b>] btrfs_ioctl_snap_create_v2+0xc7/0x110 [btrfs] [11642.340214] [<ffffffffa0468582>] btrfs_ioctl+0x590/0x27bd [btrfs] [11642.341123] [<ffffffff8147dc00>] ? mutex_unlock+0xe/0x10 [11642.341934] [<ffffffffa00fa6e9>] ? ext4_file_write_iter+0x2a3/0x36f [ext4] [11642.342936] [<ffffffff8108895d>] ? __lock_is_held+0x3c/0x57 [11642.343772] [<ffffffff81186a1d>] ? rcu_read_unlock+0x3e/0x5d [11642.344673] [<ffffffff8117dc95>] do_vfs_ioctl+0x458/0x4dc [11642.346024] [<ffffffff81186bbe>] ? __fget_light+0x62/0x71 [11642.346873] [<ffffffff8117dd70>] SyS_ioctl+0x57/0x79 [11642.347720] [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b [11642.350222] 4 locks held by fdm-stress/26849: [11642.350898] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff811706ee>] __sb_start_write+0x5f/0xb0 [11642.352375] #1: (&type->i_mutex_dir_key#4/1){+.+.+.}, at: [<ffffffffa0465981>] btrfs_mksubvol+0x4b/0x45d [btrfs] [11642.354072] #2: (&fs_info->subvol_sem){++++..}, at: [<ffffffffa0465a2a>] btrfs_mksubvol+0xf4/0x45d [btrfs] [11642.355647] #3: (&root->ordered_extent_mutex){+.+...}, at: [<ffffffffa044f456>] btrfs_wait_ordered_extents+0x50/0x217 [btrfs] [11642.357516] INFO: task fdm-stress:26850 blocked for more than 120 seconds. [11642.358508] Not tainted 4.4.0-rc6-btrfs-next-21+ #1 [11642.359376] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11642.368625] fdm-stress D ffff88021f167688 0 26850 26591 0x00000000 [11642.369716] ffff88021f167688 0000000000000001 0000000000014ec0 ffff88023edd4ec0 [11642.370950] ffff880128a98680 ffff88021f168000 ffff88023edd4ec0 7fffffffffffffff [11642.372210] 0000000000000002 ffffffff8147b7f9 ffff88021f1676a0 ffffffff8147b541 [11642.373430] Call Trace: [11642.373853] [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f [11642.374623] [<ffffffff8147b541>] schedule+0x82/0x9a [11642.375948] [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109 [11642.376862] [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f [11642.377637] [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197 [11642.378610] [<ffffffff8108affa>] ? trace_hardirqs_on+0xd/0xf [11642.379457] [<ffffffff810b079b>] ? timekeeping_get_ns+0xe/0x33 [11642.380366] [<ffffffff810b0f61>] ? ktime_get+0x41/0x52 [11642.381353] [<ffffffff8147ac08>] io_schedule_timeout+0xa0/0x102 [11642.382255] [<ffffffff8147ac08>] ? io_schedule_timeout+0xa0/0x102 [11642.383162] [<ffffffff8147b814>] bit_wait_io+0x1b/0x39 [11642.383945] [<ffffffff8147bb21>] __wait_on_bit_lock+0x4c/0x90 [11642.384875] [<ffffffff8111829f>] __lock_page+0x66/0x68 [11642.385749] [<ffffffff81082f29>] ? autoremove_wake_function+0x3a/0x3a [11642.386721] [<ffffffffa0450ddd>] lock_page+0x31/0x34 [btrfs] [11642.387596] [<ffffffffa0454e3b>] extent_write_cache_pages.isra.19.constprop.35+0x1af/0x2f4 [btrfs] [11642.389030] [<ffffffffa0455373>] extent_writepages+0x4b/0x5c [btrfs] [11642.389973] [<ffffffff810a25ad>] ? rcu_read_lock_sched_held+0x61/0x69 [11642.390939] [<ffffffffa043c913>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs] [11642.392271] [<ffffffffa0451c32>] ? __clear_extent_bit+0x26e/0x2c0 [btrfs] [11642.393305] [<ffffffffa043aa82>] btrfs_writepages+0x28/0x2a [btrfs] [11642.394239] [<ffffffff811236bc>] do_writepages+0x23/0x2c [11642.395045] [<ffffffff811198c9>] __filemap_fdatawrite_range+0x5a/0x61 [11642.395991] [<ffffffff81119946>] filemap_fdatawrite_range+0x13/0x15 [11642.397144] [<ffffffffa044f87e>] btrfs_start_ordered_extent+0xd0/0x1a1 [btrfs] [11642.398392] [<ffffffffa0452094>] ? clear_extent_bit+0x17/0x19 [btrfs] [11642.399363] [<ffffffffa0445945>] btrfs_get_blocks_direct+0x12b/0x61c [btrfs] [11642.400445] [<ffffffff8119f7a1>] ? dio_bio_add_page+0x3d/0x54 [11642.401309] [<ffffffff8119fa93>] ? submit_page_section+0x7b/0x111 [11642.402213] [<ffffffff811a0258>] do_blockdev_direct_IO+0x685/0xc24 [11642.403139] [<ffffffffa044581a>] ? btrfs_page_exists_in_range+0x1a1/0x1a1 [btrfs] [11642.404360] [<ffffffffa043d267>] ? btrfs_get_extent_fiemap+0x1c0/0x1c0 [btrfs] [11642.406187] [<ffffffff811a0828>] __blockdev_direct_IO+0x31/0x33 [11642.407070] [<ffffffff811a0828>] ? __blockdev_direct_IO+0x31/0x33 [11642.407990] [<ffffffffa043d267>] ? btrfs_get_extent_fiemap+0x1c0/0x1c0 [btrfs] [11642.409192] [<ffffffffa043b4ca>] btrfs_direct_IO+0x1c7/0x27e [btrfs] [11642.410146] [<ffffffffa043d267>] ? btrfs_get_extent_fiemap+0x1c0/0x1c0 [btrfs] [11642.411291] [<ffffffff81119a2c>] generic_file_read_iter+0x89/0x4e1 [11642.412263] [<ffffffff8108ac05>] ? mark_lock+0x24/0x201 [11642.413057] [<ffffffff8116e1f8>] __vfs_read+0x79/0x9d [11642.413897] [<ffffffff8116e6f1>] vfs_read+0x8f/0xd2 [11642.414708] [<ffffffff8116ef3d>] SyS_read+0x50/0x7e [11642.415573] [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b [11642.416572] 1 lock held by fdm-stress/26850: [11642.417345] #0: (&f->f_pos_lock){+.+.+.}, at: [<ffffffff811877e8>] __fdget_pos+0x3a/0x40 [11642.418703] INFO: task fdm-stress:26851 blocked for more than 120 seconds. [11642.419698] Not tainted 4.4.0-rc6-btrfs-next-21+ #1 [11642.420612] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11642.421807] fdm-stress D ffff880196483d28 0 26851 26591 0x00000000 [11642.422878] ffff880196483d28 00ff8801c8f60740 0000000000014ec0 ffff88023ed94ec0 [11642.424149] ffff8801c8f60740 ffff880196484000 0000000000000246 ffff8801c8f60740 [11642.425374] ffff8801bb711840 ffff8801bb711878 ffff880196483d40 ffffffff8147b541 [11642.426591] Call Trace: [11642.427013] [<ffffffff8147b541>] schedule+0x82/0x9a [11642.427856] [<ffffffff8147b6d5>] schedule_preempt_disabled+0x18/0x24 [11642.428852] [<ffffffff8147c23a>] mutex_lock_nested+0x1d7/0x3b4 [11642.429743] [<ffffffffa044f456>] ? btrfs_wait_ordered_extents+0x50/0x217 [btrfs] [11642.430911] [<ffffffffa044f456>] btrfs_wait_ordered_extents+0x50/0x217 [btrfs] [11642.432102] [<ffffffffa044f674>] ? btrfs_wait_ordered_roots+0x57/0x191 [btrfs] [11642.433259] [<ffffffffa044f456>] ? btrfs_wait_ordered_extents+0x50/0x217 [btrfs] [11642.434431] [<ffffffffa044f6ea>] btrfs_wait_ordered_roots+0xcd/0x191 [btrfs] [11642.436079] [<ffffffffa0410cab>] btrfs_sync_fs+0xe0/0x1ad [btrfs] [11642.437009] [<ffffffff81197900>] ? SyS_tee+0x23c/0x23c [11642.437860] [<ffffffff81197920>] sync_fs_one_sb+0x20/0x22 [11642.438723] [<ffffffff81171435>] iterate_supers+0x75/0xc2 [11642.439597] [<ffffffff81197d00>] sys_sync+0x52/0x80 [11642.440454] [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b [11642.441533] 3 locks held by fdm-stress/26851: [11642.442370] #0: (&type->s_umount_key#37){+++++.}, at: [<ffffffff8117141f>] iterate_supers+0x5f/0xc2 [11642.444043] #1: (&fs_info->ordered_operations_mutex){+.+...}, at: [<ffffffffa044f661>] btrfs_wait_ordered_roots+0x44/0x191 [btrfs] [11642.446010] #2: (&root->ordered_extent_mutex){+.+...}, at: [<ffffffffa044f456>] btrfs_wait_ordered_extents+0x50/0x217 [btrfs] This happened because under specific timings the path for direct IO reads can deadlock with concurrent buffered writes. The diagram below shows how this happens for an example file that has the following layout: [ extent A ] [ extent B ] [ .... 0K 4K 8K CPU 1 CPU 2 CPU 3 DIO read against range [0K, 8K[ starts btrfs_direct_IO() --> calls btrfs_get_blocks_direct() which finds the extent map for the extent A and leaves the range [0K, 4K[ locked in the inode's io tree buffered write against range [4K, 8K[ starts __btrfs_buffered_write() --> dirties page at 4K a user space task calls sync for e.g or writepages() is invoked by mm writepages() run_delalloc_range() cow_file_range() --> ordered extent X for the buffered write is created and writeback starts --> calls btrfs_get_blocks_direct() again, without submitting first a bio for reading extent A, and finds the extent map for extent B --> calls lock_extent_direct() --> locks range [4K, 8K[ --> finds ordered extent X covering range [4K, 8K[ --> unlocks range [4K, 8K[ buffered write against range [0K, 8K[ starts __btrfs_buffered_write() prepare_pages() --> locks pages with offsets 0 and 4K lock_and_cleanup_extent_if_need() --> blocks attempting to lock range [0K, 8K[ in the inode's io tree, because the range [0, 4K[ is already locked by the direct IO task at CPU 1 --> calls btrfs_start_ordered_extent(oe X) btrfs_start_ordered_extent(oe X) --> At this point writeback for ordered extent X has not finished yet filemap_fdatawrite_range() btrfs_writepages() extent_writepages() extent_write_cache_pages() --> finds page with offset 0 with the writeback tag (and not dirty) --> tries to lock it --> deadlock, task at CPU 2 has the page locked and is blocked on the io range [0, 4K[ that was locked earlier by this task So fix this by falling back to a buffered read in the direct IO read path when an ordered extent for a buffered write is found. Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Filipe Manana 提交于
When using the same file as the source and destination for a dedup (extent_same ioctl) operation we were allowing it to dedup to a destination offset beyond the file's size, which doesn't make sense and it's not allowed for the case where the source and destination files are not the same file. This made de deduplication operation successful only when the source range corresponded to a hole, a prealloc extent or an extent with all bytes having a value of 0x00. This was also leaving a file hole (between i_size and destination offset) without the corresponding file extent items, which can be reproduced with the following steps for example: $ mkfs.btrfs -f /dev/sdi $ mount /dev/sdi /mnt/sdi $ xfs_io -f -c "pwrite -S 0xab 304457 404990" /mnt/sdi/foobar wrote 404990/404990 bytes at offset 304457 395 KiB, 99 ops; 0.0000 sec (31.150 MiB/sec and 7984.5149 ops/sec) $ /git/hub/duperemove/btrfs-extent-same 24576 /mnt/sdi/foobar 28672 /mnt/sdi/foobar 929792 Deduping 2 total files (28672, 24576): /mnt/sdi/foobar (929792, 24576): /mnt/sdi/foobar 1 files asked to be deduped i: 0, status: 0, bytes_deduped: 24576 24576 total bytes deduped in this operation $ umount /mnt/sdi $ btrfsck /dev/sdi Checking filesystem on /dev/sdi UUID: 98c528aa-0833-427d-9403-b98032ffbf9d checking extents checking free space cache checking fs roots root 5 inode 257 errors 100, file extent discount Found file extent holes: start: 712704, len: 217088 found 540673 bytes used err is 1 total csum bytes: 400 total tree bytes: 131072 total fs tree bytes: 32768 total extent tree bytes: 16384 btree space waste bytes: 123675 file data blocks allocated: 671744 referenced 671744 btrfs-progs v4.2.3 So fix this by not allowing the destination to go beyond the file's size, just as we do for the same where the source and destination files are not the same. A test for xfstests follows. Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Filipe Manana 提交于
We have two cases where we end up deleting a file at log replay time when we should not. For this to happen the file must have been renamed and a directory inode must have been fsynced/logged. Two examples that exercise these two cases are listed below. Case 1) $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir -p /mnt/a/b $ mkdir /mnt/c $ touch /mnt/a/b/foo $ sync $ mv /mnt/a/b/foo /mnt/c/ # Create file bar just to make sure the fsync on directory a/ does # something and it's not a no-op. $ touch /mnt/a/bar $ xfs_io -c "fsync" /mnt/a < power fail / crash > The next time the filesystem is mounted, the log replay procedure deletes file foo. Case 2) $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/a $ mkdir /mnt/b $ mkdir /mnt/c $ touch /mnt/a/foo $ ln /mnt/a/foo /mnt/b/foo_link $ touch /mnt/b/bar $ sync $ unlink /mnt/b/foo_link $ mv /mnt/b/bar /mnt/c/ $ xfs_io -c "fsync" /mnt/a/foo < power fail / crash > The next time the filesystem is mounted, the log replay procedure deletes file bar. The reason why the files are deleted is because when we log inodes other then the fsync target inode, we ignore their last_unlink_trans value and leave the log without enough information to later replay the rename operations. So we need to look at the last_unlink_trans values and fallback to a transaction commit if they are greater than the id of the last committed transaction. So fix this by looking at the last_unlink_trans values and fallback to transaction commits when needed. Also, when logging other inodes (for case 1 we logged descendants of the fsync target inode while for case 2 we logged ascendants) we need to care about concurrent tasks updating the last_unlink_trans of inodes we are logging (which was already an existing problem in check_parent_dirs_for_sync()). Since we can not acquire their inode mutex (vfs' struct inode ->i_mutex), as that causes deadlocks with other concurrent operations that acquire the i_mutex of 2 inodes (other fsyncs or renames for example), we need to serialize on the log_mutex of the inode we are logging. A task setting a new value for an inode's last_unlink_trans must acquire the inode's log_mutex and it must do this update before doing the actual unlink operation (which is already the case except when deleting a snapshot). Conversely the task logging the inode must first log the inode and then check the inode's last_unlink_trans value while holding its log_mutex, as if its value is not greater then the id of the last committed transaction it means it logged a safe state of the inode's items, while if its value is not smaller then the id of the last committed transaction it means the inode state it has logged might not be safe (the concurrent task might have just updated last_unlink_trans but hasn't done yet the unlink operation) and therefore a transaction commit must be done. Test cases for xfstests follow in separate patches. Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Filipe Manana 提交于
If we delete a snapshot, fsync its parent directory and crash/power fail before the next transaction commit, on the next mount when we attempt to replay the log tree of the root containing the parent directory we will fail and prevent the filesystem from mounting, which is solvable by wiping out the log trees with the btrfs-zero-log tool but very inconvenient as we will lose any data and metadata fsynced before the parent directory was fsynced. For example: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ btrfs subvolume snapshot /mnt /mnt/testdir/snap $ btrfs subvolume delete /mnt/testdir/snap $ xfs_io -c "fsync" /mnt/testdir < crash / power failure and reboot > $ mount /dev/sdc /mnt mount: mount(2) failed: No such file or directory And in dmesg/syslog we get the following message and trace: [192066.361162] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [192066.363010] ------------[ cut here ]------------ [192066.365268] WARNING: CPU: 4 PID: 5130 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x17a/0x354 [btrfs]() [192066.367250] BTRFS: Transaction aborted (error -2) [192066.368401] Modules linked in: btrfs dm_flakey dm_mod ppdev sha256_generic xor raid6_pq hmac drbg ansi_cprng aesni_intel acpi_cpufreq tpm_tis aes_x86_64 tpm ablk_helper evdev cryptd sg parport_pc i2c_piix4 psmouse lrw parport i2c_core pcspkr gf128mul processor serio_raw glue_helper button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [192066.377154] CPU: 4 PID: 5130 Comm: mount Tainted: G W 4.4.0-rc6-btrfs-next-20+ #1 [192066.378875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [192066.380889] 0000000000000000 ffff880143923670 ffffffff81257570 ffff8801439236b8 [192066.382561] ffff8801439236a8 ffffffff8104ec07 ffffffffa039dc2c 00000000fffffffe [192066.384191] ffff8801ed31d000 ffff8801b9fc9c88 ffff8801086875e0 ffff880143923710 [192066.385827] Call Trace: [192066.386373] [<ffffffff81257570>] dump_stack+0x4e/0x79 [192066.387387] [<ffffffff8104ec07>] warn_slowpath_common+0x99/0xb2 [192066.388429] [<ffffffffa039dc2c>] ? __btrfs_unlink_inode+0x17a/0x354 [btrfs] [192066.389236] [<ffffffff8104ec68>] warn_slowpath_fmt+0x48/0x50 [192066.389884] [<ffffffffa039dc2c>] __btrfs_unlink_inode+0x17a/0x354 [btrfs] [192066.390621] [<ffffffff81184b55>] ? iput+0xb0/0x266 [192066.391200] [<ffffffffa039ea25>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [192066.391930] [<ffffffffa03ca623>] check_item_in_log+0x1fe/0x29b [btrfs] [192066.392715] [<ffffffffa03ca827>] replay_dir_deletes+0x167/0x1cf [btrfs] [192066.393510] [<ffffffffa03cccc7>] replay_one_buffer+0x417/0x570 [btrfs] [192066.394241] [<ffffffffa03ca164>] walk_up_log_tree+0x10e/0x1dc [btrfs] [192066.394958] [<ffffffffa03cac72>] walk_log_tree+0xa5/0x190 [btrfs] [192066.395628] [<ffffffffa03ce8b8>] btrfs_recover_log_trees+0x239/0x32c [btrfs] [192066.396790] [<ffffffffa03cc8b0>] ? replay_one_extent+0x50a/0x50a [btrfs] [192066.397891] [<ffffffffa0394041>] open_ctree+0x1d8b/0x2167 [btrfs] [192066.398897] [<ffffffffa03706e1>] btrfs_mount+0x5ef/0x729 [btrfs] [192066.399823] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf [192066.400739] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3 [192066.401700] [<ffffffff811714b9>] mount_fs+0x67/0x131 [192066.402482] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde [192066.403930] [<ffffffffa03702bd>] btrfs_mount+0x1cb/0x729 [btrfs] [192066.404831] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf [192066.405726] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3 [192066.406621] [<ffffffff811714b9>] mount_fs+0x67/0x131 [192066.407401] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde [192066.408247] [<ffffffff8118ae36>] do_mount+0x893/0x9d2 [192066.409047] [<ffffffff8113009b>] ? strndup_user+0x3f/0x8c [192066.409842] [<ffffffff8118b187>] SyS_mount+0x75/0xa1 [192066.410621] [<ffffffff8147e517>] entry_SYSCALL_64_fastpath+0x12/0x6b [192066.411572] ---[ end trace 2de42126c1e0a0f0 ]--- [192066.412344] BTRFS: error (device dm-0) in __btrfs_unlink_inode:3986: errno=-2 No such entry [192066.413748] BTRFS: error (device dm-0) in btrfs_replay_log:2464: errno=-2 No such entry (Failed to recover log tree) [192066.415458] BTRFS error (device dm-0): cleaner transaction attach returned -30 [192066.444613] BTRFS: open_ctree failed This happens because when we are replaying the log and processing the directory entry pointing to the snapshot in the subvolume tree, we treat its btrfs_dir_item item as having a location with a key type matching BTRFS_INODE_ITEM_KEY, which is wrong because the type matches BTRFS_ROOT_ITEM_KEY and therefore must be processed differently, as the object id refers to a root number and not to an inode in the root containing the parent directory. So fix this by triggering a transaction commit if an fsync against the parent directory is requested after deleting a snapshot. This is the simplest approach for a rare use case. Some alternative that avoids the transaction commit would require more code to explicitly delete the snapshot at log replay time (factoring out common code from ioctl.c: btrfs_ioctl_snap_destroy()), special care at fsync time to remove the log tree of the snapshot's root from the log root of the root of tree roots, amongst other steps. A test case for xfstests that triggers the issue follows. seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { _cleanup_flakey cd / rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter . ./common/dmflakey # real QA test starts here _need_to_be_root _supported_fs btrfs _supported_os Linux _require_scratch _require_dm_target flakey _require_metadata_journaling $SCRATCH_DEV rm -f $seqres.full _scratch_mkfs >>$seqres.full 2>&1 _init_flakey _mount_flakey # Create a snapshot at the root of our filesystem (mount point path), delete it, # fsync the mount point path, crash and mount to replay the log. This should # succeed and after the filesystem is mounted the snapshot should not be visible # anymore. _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap1 _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap1 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT _flakey_drop_and_remount [ -e $SCRATCH_MNT/snap1 ] && \ echo "Snapshot snap1 still exists after log replay" # Similar scenario as above, but this time the snapshot is created inside a # directory and not directly under the root (mount point path). mkdir $SCRATCH_MNT/testdir _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/testdir/snap2 _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/testdir/snap2 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir _flakey_drop_and_remount [ -e $SCRATCH_MNT/testdir/snap2 ] && \ echo "Snapshot snap2 still exists after log replay" _unmount_flakey echo "Silence is golden" status=0 exit Signed-off-by: NFilipe Manana <fdmanana@suse.com> Tested-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <clm@fb.com>
-
- 28 2月, 2016 14 次提交
-
-
由 Al Viro 提交于
... or we risk seeing a bogus value of d_is_symlink() there. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... otherwise d_is_symlink() above might have nothing to do with the inode value we've got. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
both do_last() and walk_component() risk picking a NULL inode out of dentry about to become positive, *then* checking its flags and seeing that it's not negative anymore and using (already stale by then) value they'd fetched earlier. Usually ends up oopsing soon after that... Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... into returning a positive to path_openat(), which would interpret that as "symlink had been encountered" and proceed to corrupt memory, etc. It can only happen due to a bug in some ->open() instance or in some LSM hook, etc., so we report any such event *and* make sure it doesn't trick us into further unpleasantness. Cc: stable@vger.kernel.org # v3.6+, at least Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
-EBADF is a rather confusing error if an operations is not supported, and nfsd gets rather upset about it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Mikulas Patocka 提交于
The delete opration can allocate additional space on the HPFS filesystem due to btree split. The HPFS driver checks in advance if there is available space, so that it won't corrupt the btree if we run out of space during splitting. If there is not enough available space, the HPFS driver attempted to truncate the file, but this results in a deadlock since the commit 7dd29d8d ("HPFS: Introduce a global mutex and lock it on every callback from VFS"). This patch removes the code that tries to truncate the file and -ENOSPC is returned instead. If the user hits -ENOSPC on delete, he should try to delete other files (that are stored in a leaf btree node), so that the delete operation will make some space for deleting the file stored in non-leaf btree node. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Ross Zwisler 提交于
As it is currently written ext4_dax_mkwrite() assumes that the call into __dax_mkwrite() will not have to do a block allocation so it doesn't create a journal entry. For a read that creates a zero page to cover a hole followed by a write that actually allocates storage this is incorrect. The ext4_dax_mkwrite() -> __dax_mkwrite() -> __dax_fault() path calls get_blocks() to allocate storage. Fix this by having the ->page_mkwrite fault handler call ext4_dax_fault() as this function already has all the logic needed to allocate a journal entry and call __dax_fault(). Also update the ext2 fault handlers in this same way to remove duplicate code and keep the logic between ext2 and ext4 the same. Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Ross Zwisler 提交于
Previously calls to dax_writeback_mapping_range() for all DAX filesystems (ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range(). dax_writeback_mapping_range() needs a struct block_device, and it used to get that from inode->i_sb->s_bdev. This is correct for normal inodes mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw block devices and for XFS real-time files. Instead, call dax_writeback_mapping_range() directly from the filesystem ->writepages function so that it can supply us with a valid block device. This also fixes DAX code to properly flush caches in response to sync(2). Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@fb.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
dax_clear_blocks() needs a valid struct block_device and previously it was using inode->i_sb->s_bdev in all cases. This is correct for normal inodes on mounted ext2, ext4 and XFS filesystems, but is incorrect for DAX raw block devices and for XFS real-time devices. Instead, rename dax_clear_blocks() to dax_clear_sectors(), and change its arguments to take a bdev and a sector instead of an inode and a block. This better reflects what the function does, and it allows the filesystem and raw block device code to pass in an appropriate struct block_device. Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Suggested-by: NDan Williams <dan.j.williams@intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@fb.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Online defrag operations for ext4 are hard coded to use the page cache. See ext4_ioctl() -> ext4_move_extents() -> move_extent_per_page() When combined with DAX I/O, which circumvents the page cache, this can result in data corruption. This was observed with xfstests ext4/307 and ext4/308. Fix this by only allowing online defrag for non-DAX files. Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@fb.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
When S_DAX is set on an inode we assume that if there are pages attached to the mapping (mapping->nrpages != 0), those pages are clean zero pages that were used to service reads from holes. Any dirty data associated with the inode should be in the form of DAX exceptional entries (mapping->nrexceptional) that is written back via dax_writeback_mapping_range(). With the current code, though, this isn't always true. For example, ext2 and ext4 directory inodes can have S_DAX set, but have their dirty data stored as dirty page cache entries. For these types of inodes, having S_DAX set doesn't really make sense since their I/O doesn't actually happen through the DAX code path. Instead, only allow S_DAX to be set for regular inodes for ext2 and ext4. This allows us to have strict DAX vs non-DAX paths in the writeback code. Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@fb.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Williams 提交于
The recent *sync enabling discovered that we are inserting into the block_device pagecache counter to the expectations of the dirty data tracking for dax mappings. This can lead to data corruption. We want to support DAX for block devices eventually, but it requires wider changes to properly manage the pagecache. dump_stack+0x85/0xc2 dax_writeback_mapping_range+0x60/0xe0 blkdev_writepages+0x3f/0x50 do_writepages+0x21/0x30 __filemap_fdatawrite_range+0xc6/0x100 filemap_write_and_wait+0x4a/0xa0 set_blocksize+0x70/0xd0 sb_set_blocksize+0x1d/0x50 ext4_fill_super+0x75b/0x3360 mount_bdev+0x180/0x1b0 ext4_mount+0x15/0x20 mount_fs+0x38/0x170 Mark the support broken so its disabled by default, but otherwise still available for testing. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reported-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Suggested-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guozhonghua 提交于
When doing append direct io cleanup, if deleting inode fails, it goes out without unlocking inode, which will cause the inode deadlock. This issue was introduced by commit cf1776a9 ("ocfs2: fix a tiny race when truncate dio orohaned entry"). Signed-off-by: NGuozhonghua <guozhonghua@h3c.com> Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NGang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Cashman 提交于
Replace calls to get_random_int() followed by a cast to (unsigned long) with calls to get_random_long(). Also address shifting bug which, in case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits. Signed-off-by: NDaniel Cashman <dcashman@android.com> Acked-by: NKees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Nick Kralevich <nnk@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2016 8 次提交
-
-
由 Liu Bo 提交于
Xfstests btrfs/011 complains about a deadlock warning, [ 1226.649039] ========================================================= [ 1226.649039] [ INFO: possible irq lock inversion dependency detected ] [ 1226.649039] 4.1.0+ #270 Not tainted [ 1226.649039] --------------------------------------------------------- [ 1226.652955] kswapd0/46 just changed the state of lock: [ 1226.652955] (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 1226.652955] (&fs_info->dev_replace.lock){+.+.+.} and interrupts could create inverse lock ordering between them. [ 1226.652955] other info that might help us debug this: [ 1226.652955] Chain exists of: &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock [ 1226.652955] Possible interrupt unsafe locking scenario: [ 1226.652955] CPU0 CPU1 [ 1226.652955] ---- ---- [ 1226.652955] lock(&fs_info->dev_replace.lock); [ 1226.652955] local_irq_disable(); [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] lock(&found->groups_sem); [ 1226.652955] <Interrupt> [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] *** DEADLOCK *** Commit 084b6e7c ("btrfs: Fix a lockdep warning when running xfstest.") tried to fix a similar one that has the exactly same warning, but with that, we still run to this. The above lock chain comes from btrfs_commit_transaction ->btrfs_run_delayed_items ... ->__btrfs_update_delayed_inode ... ->__btrfs_cow_block ... ->find_free_extent ->cache_block_group ->load_free_space_cache ->btrfs_readpages ->submit_one_bio ... ->__btrfs_map_block ->btrfs_dev_replace_lock However, with high memory pressure, tasks which hold dev_replace.lock can be interrupted by kswapd and then kswapd is intended to release memory occupied by superblock, inodes and dentries, where we may call evict_inode, and it comes to [ 1226.652955] [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30 [ 1226.652955] [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700 delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads to a ABBA deadlock. To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but things are simpler here since we only needs read's spinlock to blocking lock. With this, btrfs/011 no more produces warnings in dmesg. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The control device is accessible when no filesystem is mounted and we may want to query features supported by the module. This is already possible using the sysfs files, this ioctl is for parity and convenience. Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The current practical default is ~4k on x86_64 (the logic is more complex, simplified for brevity), the inlined files land in the metadata group and thus consume space that could be needed for the real metadata. The inlining brings some usability surprises: 1) total space consumption measured on various filesystems and btrfs with DUP metadata was quite visible because of the duplicated data within metadata 2) inlined data may exhaust the metadata, which are more precious in case the entire device space is allocated to chunks (ie. balance cannot make the space more compact) 3) performance suffers a bit as the inlined blocks are duplicate and stored far away on the device. Proposed fix: set the default to 2048 This fixes namely 1), the total filesysystem space consumption will be on par with other filesystems. Partially fixes 2), more data are pushed to the data block groups. The characteristics of 3) are based on actual small file size distribution. The change is independent of the metadata blockgroup type (though it's most visible with DUP) or system page size as these parameters are not trival to find out, compared to file size. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Let's remove the error message that appears when the tree_id is not present. This can happen with the quota tree and has been observed in practice. The applications are supposed to handle -ENOENT and we don't need to report that in the system log as it's not a fatal error. Reported-by: NVlastimil Babka <vbabka@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Arnd Bergmann 提交于
With CONFIG_SMP and CONFIG_PREEMPT both disabled, gcc decides to partially inline the get_state_failrec() function but cannot figure out that means the failrec pointer is always valid if the function returns success, which causes a harmless warning: fs/btrfs/extent_io.c: In function 'clean_io_failure': fs/btrfs/extent_io.c:2131:4: error: 'failrec' may be used uninitialized in this function [-Werror=maybe-uninitialized] This marks get_state_failrec() and set_state_failrec() both as 'noinline', which avoids the warning in all cases for me, and seems less ugly than adding a fake initialization. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 47dc196a ("btrfs: use proper type for failrec in extent_state") Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Trond Myklebust 提交于
Replace another case where the layout 'plh_block_lgets' can trigger infinite loops in send_layoutget(). Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the server reboots while there is a layoutget outstanding, then the call to pnfs_choose_layoutget_stateid() will fail with an EAGAIN error, which causes an infinite loop in send_layoutget(). The reason why we never break out of the loop is that the layout 'plh_block_lgets' field is never cleared. Fix is to replace plh_block_lgets with NFS_LAYOUT_INVALID_STID, which can be reset after a new layoutget. Fixes: ab7d763e ("pNFS: Ensure nfs4_layoutget_prepare returns...") Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 20 2月, 2016 4 次提交
-
-
由 Maxim Patlasov 提交于
propagate_one(m) calculates "type" argument for copy_tree() like this: > if (m->mnt_group_id == last_dest->mnt_group_id) { > type = CL_MAKE_SHARED; > } else { > type = CL_SLAVE; > if (IS_MNT_SHARED(m)) > type |= CL_MAKE_SHARED; > } The "type" argument then governs clone_mnt() behavior with respect to flags and mnt_master of new mount. When we iterate through a slave group, it is possible that both current "m" and "last_dest" are not shared (although, both are slaves, i.e. have non-NULL mnt_master-s). Then the comparison above erroneously makes new mount shared and sets its mnt_master to last_source->mnt_master. The patch fixes the problem by handling zero mnt_group_id-s as though they are unequal. The similar problem exists in the implementation of "else" clause above when we have to ascend upward in the master/slave tree by calling: > last_source = last_source->mnt_master; > last_dest = last_source->mnt_parent; proper number of times. The last step is governed by "n->mnt_group_id != last_dest->mnt_group_id" condition that may lie if both are zero. The patch fixes this case in the same way as the former one. [AV: don't open-code an obvious helper...] Signed-off-by: NMaxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
It forgets kunmap() on a failure exit, but there's really no point keeping the page kmapped at all - after all, what we are doing is a bunch of memcpy() into the parts of page, so kmap_atomic()/kunmap_atomic() just around those memcpy() is enough. Spotted-by: NInsu Yun <wuninsu@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Mateusz Guzik 提交于
The code could leak xattrs->lock on error. Problem introduced with 786534b9 "tmpfs: listxattr should include POSIX ACL xattrs". Signed-off-by: NMateusz Guzik <mguzik@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Wouter van Kesteren 提交于
The user-visible impact of the issue is for example that without this patch sensors-detect breaks when trying to seek in /dev/cpu/0/cpuid. '~0ULL' is a 'unsigned long long' that when converted to a loff_t, which is signed, gets turned into -1. later in vfs_setpos we have 'if (offset > maxsize)', which makes it always return EINVAL. Fixes: b25472f9 ("new helpers: no_seek_end_llseek{,_size}()") Signed-off-by: NWouter van Kesteren <woutershep@gmail.com> Reviewed-by: NAndreas Dilger <adilger@dilger.ca> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-