- 10 3月, 2011 2 次提交
-
-
由 Matt Carlson 提交于
Commit 2866d956, entitled "tg3: Expand 5719 workaround" extended a 5719 A0 workaround to all revisions of the chip. There was a change that should have been a part of that patch that was missed. This patch adds the missing piece. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
V2: Move #ifdef CONFIG_PROC_FS into bonding.h, as suggested by David. bond_main.c is bloating, separate the procfs code out, move them to bond_procfs.c Signed-off-by: NWANG Cong <amwang@redhat.com> Reviewed-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2011 1 次提交
-
-
由 Andy Gospodarek 提交于
This commit: commit d7c8a29f Author: Emil Tantilov <emil.s.tantilov@intel.com> Date: Thu Mar 3 09:25:02 2011 +0000 ixgbe: improve logic in ixgbe_init_mbx_params_pf incorrectly added a line that accessed mbx->udelay. I'm sure the intent was mbx->usec_delay. This patch fixes the compilation error. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2011 22 次提交
-
-
由 Emil Tantilov 提交于
Add the ability to set 100/F on x540. Fix reporting of advertised modes by adding check for phy.autoneg_advertised Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Use if/then instead of an all-inclusive case statement. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Add description for ixgbe_init_eeprom_params_X540 and whitespace fix. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
This patch enables flow control pause parameters auto-negotiation support to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics modules at 1G speed Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Add defines to accumulate and display x540 PHY statistic counters on transmit/receive. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
The 82599 was not correctly having some of it's counters cleared for flow control. This change corrects that. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
This change cleans up several situations in which we were either stepping over possible errors, or calling initialization routines multiple times. Also includes whitespace fixes where applicable. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yi Zou 提交于
Add support to the ndo_fcoe_ddp_target() to allow the Intel 82599 device to also provide DDP offload capability when the upper FCoE protocol stack is operating as a target. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NKiran Patil <kiran.patil@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
In the previous commit: commit 5e655105 Author: Don Skidmore <donald.c.skidmore@intel.com> Date: Fri Feb 25 01:58:04 2011 +0000 ixgbe: add function pointer for semaphore function there was one release of the semaphore function call which did not get converted to a function pointer. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch adds statistics output for OS2BMC feature which is configured by eeprom on capable devices. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
kernel build fails with: drivers/built-in.o: In function `e1000_lv_jumbo_workaround_ich8lan': (.text+0x3e7a8): undefined reference to `crc32_le' when CONFIG_CRC32 is not set or does not match the CONFIG_E1000E selection. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shan Wei 提交于
drivers/net/s2io.c:7559: warning: ‘tcp_len’ may be used uninitialized in this function Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
When there is a ptype handler holding a clone of this skb, whose destination MAC addresse is overwritten, the owner of this handler may get a corrupted packet. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
These two functions are only used when net poll controller is enabled. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Lancer requires multicast capability flag set during IFACE_CREATE for adding multicast filters. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSubramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
For Lancer disable interrupts in close by disarming CQs and EQs. Change the order of calls in be_close to achieve the correct result. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSubramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Remove TX Queue stop in close Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSubramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Change f/w command versions for Lancer Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSubramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Add error recovery during load for Lancer Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSubramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
L4 checksum field is valid only for TCP/UDP packets in Lancer Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSubramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Workaround added for Lancer in handling RX ERR completion received when no RX buffers are posted is not needed. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSubramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2011 4 次提交
-
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Reviewed-by: NJesse Gross <jesse@nicira.com>
-
由 Oliver Neukum 提交于
This allows "ethtool advertise" to control the speed and duplex features the device offers the switch. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Hayes Wang 提交于
Signed-off-by: NHayes Wang <hayeswang@realtek.com> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Ben Hutchings 提交于
Based on work by Neil Turton <nturton@solarflare.com> and Kieran Mansley <kmansley@solarflare.com>. The BIU has now been verified to handle 3- and 4-dword writes within a single 128-bit register correctly. This means we can enable write- combining and only insert write barriers between writes to distinct registers. This has been observed to save about 0.5 us when pushing a TX descriptor to an empty TX queue. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
- 04 3月, 2011 11 次提交
-
-
由 Patrick McHardy 提交于
Netlink message processing in the kernel is synchronous these days, capabilities can be checked directly in security_netlink_recv() from the current process. Signed-off-by: NPatrick McHardy <kaber@trash.net> Reviewed-by: NJames Morris <jmorris@namei.org> [chrisw: update to include pohmelfs and uvesafb] Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Add pr_fmt. Removed trailing "\n" from version, add back via pr_info("%s\n", version); Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Add a bit more data to the output. Convert string speeds to integer. Object size reduced a tiny bit. $ size drivers/net/mii.o* text data bss dec hex filename 4155 56 1000 5211 145b drivers/net/mii.o.new 4184 56 1000 5240 1478 drivers/net/mii.o.old Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the current logging styles. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Neatening and standardization to the current logging mechanisms. Miscellaneous speen/speed typo correction. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
As it isn't necessary nor really useful any longer. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Extend be_alloc_pages() with a gfp parameter, so that we use GFP_KERNEL allocations instead of GFP_ATOMIC when not running in softirq context. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Po-Yu Chuang 提交于
FTMAC100 Ethernet Media Access Controller supports 10/100 Mbps and MII. This driver has been working on some ARM/NDS32 SoC's including Faraday A320 and Andes AG101. Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
For some time is known that ASPM is causing troubles on r8169, i.e. make device randomly stop working without any errors in dmesg. Currently Tomi Leppikangas reports that system with r8169 device hangs with MCE errors when ASPM is enabled: https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4 Lets disable ASPM for r8169 devices at all, to avoid problems with r8169 PCIe devices at least for some users. Reported-by: NTomi Leppikangas <tomi.leppikangas@gmail.com> Cc: stable@kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Uzel 提交于
Following steps lead to deadlock in kernel: dd if=/dev/zero of=img bs=512 count=1000 losetup -f img mkfs.ext2 /dev/loop0 mount -t ext2 -o loop /dev/loop0 mnt umount mnt/ Stacktrace: [<c102ec04>] irq_exit+0x36/0x59 [<c101502c>] smp_apic_timer_interrupt+0x6b/0x75 [<c127f639>] apic_timer_interrupt+0x31/0x38 [<c101df88>] mutex_spin_on_owner+0x54/0x5b [<fe2250e9>] lo_release+0x12/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a4da5>] fput+0xd5/0x1aa [<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop] [<fe225110>] lo_release+0x39/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a59d9>] deactivate_locked_super+0x17/0x36 [<c10b6f37>] sys_umount+0x27e/0x2a5 [<c10b6f69>] sys_oldumount+0xb/0xe [<c1002897>] sysenter_do_call+0x12/0x26 [<ffffffff>] 0xffffffff Regression since 2a48fc0a, which introduced the private loop_mutex as part of the BKL removal process. As per [1], the mutex can be safely removed. [1] http://www.gossamer-threads.com/lists/linux/kernel/1341930 Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172Signed-off-by: NPetr Uzel <petr.uzel@suse.cz> Cc: stable@kernel.org Reviewed-by: NNikanth Karthikesan <knikanth@suse.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-