- 12 4月, 2006 24 次提交
-
-
由 Tejun Heo 提交于
Data structures residing on memory and fetched by the controller should have LE ordering. Fix it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
There's no need to perform hardreset during driver initialization. It's already done during host reset and even if the controller is in some wacky state, we now have proper hardreset to back us up. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Reimplement hardreset according to the datasheet. The old hardreset didn't reset controller status and the controller might not be ready after reset. Also, as SStatus is a bit flakey after hardreset, sata_std_hardrset() didn't use to wait long enough before proceeding. Note that as we're not depending on SStatus, DET==1 condition cannot be used to wait for link, so use shorter timeout for no device case. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Nothing, not the datasheet nor the errats, says this delay is necessary and with the previous PORT_CS_INIT change, we know the controller is in good state. Kill 10ms sleep. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Make sure the controller has no pending commands and ready for command before issuing SRST. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Implement sil24_init_port which performs port initialization via PORT_CS_INIT. To be used later by softreset and EH. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
SiI3124 might lose completion interrupt if completion interrupt occurs shortly after SLOT_STAT register is read for the previous completion interrupt if it is operating in PCI-X mode. This currently doesn't trigger as libata never queues more than one command, but it will with NCQ changes. This patch implements the workaround - turning on WoC and explicitly clearing interrupt. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
All sil24 controllers share the same host flags except for NPORTS. Consolidate them into SIL24_COMMON_FLAGS. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Add HOST_CTRL_* and more PORT_IRQ_* bits. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Rename PORT_IRQ_SDB_FIS to more proper PORT_IRQ_SDB_NOTIFY. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Type fix. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
This will be used by LLDD hardreset implementation. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Move ata_set_mode() failure handling outside of ap->ops->set_mode if clause such that it can handle ap->ops->set_mode failures after it's updated. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Devices which consumed all their changes used to be disabled every iteration. This causes unnecessary noise in the console output. Disable once and leave alone. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Replace hard-coded waiting loops in sata_sil24 to ata_wait_register(). Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Replace ahci_poll_register() with ata_wait_register(). Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Improve softreset error message. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
sil24_softreset calculated timeout by adding ATA_TMOUT_BOOT * HZ to jiffies; however, as ATA_TMOUT_BOOT is already in jiffies, multiplying by HZ makes the value way off. Fix it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Make reset methods complain loud when they fail. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
@verbose was added to ata_reset_fn_t because AHCI complained during probing if no device was attached to the port. However, muting failure message isn't the correct approach. Reset methods are responsible for detecting no device condition and finishing successfully. Now that AHCI softreset is fixed, kill @verbose. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Make setting CBL type responsibility of probeinit. This allows using only ap->cbl == ATA_CBL_SATA test in all other parts. Without this, ata_down_sata_spd_limit() doesn't work during probe reset. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
-
- 11 4月, 2006 16 次提交
-
-
由 Matthias Urlichs 提交于
Since the arrays are declared as in_urbs[N_IN_URB] and out_urbs[N_OUT_URB], both for loops go one over the end of the array. This fixes coverity id #555. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de> Signed-Off-By: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Since the visual STATIC_PSEUDOCOLOR has a read-only colormap, use logos with 16 colors only since these logos use the console palette. This has a higher likelihood that the logo will display correctly. Signed-of-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Bugzilla Bug 6299: A pixel size of 8 bits produces wrong logo colors in x86_64. The driver has 2 methods for setting the color map, using the protected mode interface provided by the video BIOS and directly writing to the VGA registers. The former is not supported in x86_64 and the latter is enabled only in i386. Fix by enabling the latter method in x86_64 only if supported by the BIOS. If both methods are unsupported, change the visual of vesafb to STATIC_PSEUDOCOLOR. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Heaps of build errors - disable it to keep sparc32 allmodconfig happy. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Fix an obvious of-by-one error spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
CRC_CCITT is an internal helper function that should be select'ed. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Fix a memory leak spotted by the Coverity checker if (!try_module_get(owner)). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
- make the needlessly global gigaset_get_cs_by_tty() static - remove the unused EXPORT_SYMBOL_GPL(gigaset_debugdrivers) Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Replace some atomic_t variables in the Gigaset drivers by non-atomic ones, using spinlocks instead to assure atomicity, as proposed in discussions on the linux-kernel mailing list. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Remove four unnecessary forward function declarations and an obsolete E-mail address from the Siemens Gigaset drivers. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Remove the private version of __skb_put() from the Siemens Gigaset drivers. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Convert the semaphores used by the Gigaset drivers to mutexes. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Eliminate the from_user argument from a debugging function, thus easing the job of sparse. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Uninline a function which was slightly too big to warrant inlining. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Remove the IFNULL debugging macros from the Gigaset drivers. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Correct the way the Gigaset drivers create their sysfs entries. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-