Similar as the previous patch for model=fujitsu, we can now move the
static quirk for F1734 to the auto-parser.  The only difference is the
default pin configurations: F1734 has less pins than Amilo's.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now adding the support for the volume-knob widget, we can move the static
quirk for ALC880 model=fujitsu to the auto-parser completely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It needs a few extra setups for EAPD, but others look fairly
straightforward.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clevo machines with ALC880 are all well with proper BIOS setup.
It seems still requiring the additional COEF setup for the EAPD.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Medion W810 with ALC880 has a typical BIOS bug, copying the
pin-defaults without disabling the unused pins.  At least, the pin
0x17 must be disabled.  Also, it requires GPIO-2 setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC880 model=lg could work fine with the auto-parser due to the recent
rewrite, but it still needs the manual adjustment; namely, the BIOS leaves
unused pins as some real active jacks.  This confuses the parser.
Thus we just cover these pins and override the pin-configs as a fix-up.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we can clean up all static quirks for ALC260.
Also many codes in alc_quirks.c can be ripped off since they have been
used only by ALC260 static quirks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The model works with the auto-parser as is, thus now good to drop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's working with the auto-parser just with the standard GPIO 1 setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The support for Replacer 627V in the auto-parser needs the unique unsol
event handling: although the machine has a single output pin 0x0f, it's
used for both the headphone and the speaker, and the driver needs to
toggle the output route via GPIO 1.

In addition, it needs a special COEF setup with 0x3050.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC260 model=acer needs GPIO1 setup.  It could be selected well
if the codec SSID is set properly by BIOS, but to make sure, enable it
forcibly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The model=will for ALC260 requires the pin 0x0f to be a headphone and
some special verbs for the COEF to turn on the amp.  Now added these as
fixup entries and removed the static model quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The patch adds the documentation file explaining the API
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit b99a776d removed all effects of
the STAC92HD83* model quirk "hp". However, it left the model selection
and documentation behind, confusing users with inverted mute
leds. Completely remove this quirk and its documentation.
Signed-off-by: NGustavo Maciel Dias Vieira <gustavo@sagui.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

They're not currently actively worked on, the hardware being rather
obsolete by now.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some stuff was moved from kernel.org to other places.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the
new model dell-vostro-3500.
Signed-off-by: NJulian Wollrath <jwollrath@web.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that model=ultra is supported well by the auto-parser, we can get rid
of the whole alc262_quirks.c and its related codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* Channel Mode
  This is an enum control to change the surround-channel setup,
  appears only when the surround channels are available.
  It gives the number of channels to be used, "2ch", "4ch" abd "6ch".
  According to the configuration, this also controls the
  jack-retasking of multi-I/O jacks.

* Independent HP
  When this enum control is enabled, the headphone output is routed
  from an individual stream (the third PCM such as hw:0,2) instead of
  the primary stream.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the ugly real world, there area really broken devices that don't set
codec SSID correctly.  In such a case, the ID can be random, thus the
patching won't work reliably.

For applying the patch forcibly to such a device, the driver will skip
the vendor and/or subsystem ID checks when zero or a negative number is
given in [codec] section.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a new option "snoop" for the traffic control of the HD-audio
controller chip.  When set to 0, the non-snooping mode is used with
the traffic control bit is set in each stream control register.
This may allow better operations in the low power mode, but the actual
implementation is depending pretty much on the chipset.

As already implemented, more or less each chipset has own snoop-control
register bit.  Now this setup refers to the snoop option, too.

Also, a new VIA chipset may require the non-snooping mode when set so
in BIOS.  In such a case, the option value is overridden.

As default, it's still set to snoop=1 for keeping the same behavior as
before.  In near future, it'll be set to 0 as default after checking
it works in every system well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The rest of ALC662 quirks are only for desktops, and they should work
with the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the recent fixes, this device works with the auto-parser well.
Let's kill it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce the pincfg table to patch_conexant.c for fixing up the extra
pin-configuration for auto-parser.  As an example, Lenovo X200 model is
replaced with this new mechanism.  (This also fixes the wrong mixer
elements for docking-station I/O in the previous model quirk
automagically.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These models work now with the BIOS auto-parser, so let's drop them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and
dmic models with the static pin-config tables.

Now we can get rid of all alc269_quirks.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Let's remove the rest of ALC861 and ALC861-VD quirks.
If any breakage is found, it can be fixed easily via the pin-config
table update.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are confirmed to work with the auto-parser with pincfg fixups.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also update the model description, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are confirmed to work with the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Get rid of the rest of ALC268 model quirks.  They are all confirmed to
work with the auto-parser, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook
specific COEF and pin configurations.  Removed the model entries
from alc269_quirks.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both are supported by the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Moved some code to alc269_quirks.c for dependency, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The auto-parser works for these models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC260 HP models work with the BIOS auto-parser.  Let's cut them off.
Also move alc260_hp_master_*() to alc262_quirks.c as these are still
referred from there.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP and sony-assamd models work with the BIOS auto-parser nowadays,
so let's reduce the unnecessary code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>